Simple logic from below internal tables

Hi,
I have one i.table ITAB.
entries as:
Year   Month    value
2008   12         0.00
I have another i.table ITAB1
entries as:
Year       Month   value
2008       1          12.00
2008       2          15.00
2008       3          10.00
2008       4          11.00
2008       11         0.00
2008       12         0.00
Both these i.tables are retrieved from same table.
Now i required logic such that i should be able check each month 12-1, 11-1 etc.. till the month have some value other than 0.00.
Note: i should not use
Loop at ITAB.
If itab-value eq 0.
logic should pick up value from previous available month which have value from ITAB1
endif.
endloop.
can anybody provide simple logic for this!
Thanks,
Deep.

Hi,
do we have to get a non zero value for a record in ITAB, from a previous period record, as here, from ITAB1? And wat we can't use ? please clarify..
If yes...
SORT ITAB BY ASCENDING YEAR MONTH.
SORT ITAB1 BY DESCENDING YEAR MONTH.
FLAG = 0.
LOOP AT ITAB.
FLAG = 0.
IF ITAB-VALUE EQ 0.
LOOP AT ITAB1.
IF ITAB1-YEAR = ITAB-YEAR AND ITAB1-MONTH AND ITAB-MONTH.
FALG = 1.           " matching record found
ENDIF.
IF FLAG EQ 1.           " once record found we need to go further nd find a non-zero value as
                                 " sorted descending order we will get value from previous possible record.
IF ITAB1-VALUE NE 0.
MODIFY ITAB FROM ITAB1.
FLAG = 0.
ENDIF.
ENDLOOP.
ENDLOOP.
-pranav

Similar Messages

How to insert data from different internal table into a data base table

hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)

REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work.

How to read data from an internal table into a real table?

Hello experts,
I'm relatively new to ABAP and I'm trying to figure out how to read data from an internal table into a table that I created. I'm trying to use the RRW3_GET_QUERY_VIEW_DATA function module to read data from a multiprovider. I'm trying to read data from the e_cell_data and e_axis_data tables into a table that I've already created. Please see code below.
TABLES MULTITAB.
DATA:
query_name TYPE RSZCOMPID,
s_cubename TYPE RSINFOPROV,
t_cell_data TYPE RRWS_T_CELL,
t_axis_data TYPE RRWS_THX_AXIS_DATA,
t_axis_info TYPE RRWS_THX_AXIS_INFO,
wa_t_cell_data like line of t_cell_data,
wa_t_axis_data like line of t_axis_data,
w_corp_tab like line of t_cell_data.
s_cubename = 'CORP_MPO1'.
query_name = 'Z_corp_test'.
    CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
       EXPORTING
         i_infoprovider           = s_cubename
         i_query                  = query_name
        i_t_parameter            = query_string_tab
       IMPORTING
         e_cell_data              = t_cell_data
         e_axis_data              = t_axis_data
         e_axis_info              = t_axis_info.
If anyone has any information to help me, I would greatly appreciate it. Thanks.

Hi,
<li>Once you call the function module RRW3_GET_QUERY_VIEW_DATA, lets say data is available in the corresponding tables e_cell_data e_axis_data which you have mentioned.
<li>Modify your internal table defined for other purpose, with data from e_cell_data e_axis_data like below.
LOOP AT t_cell_data INTO wa_t_cell_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_cell_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
LOOP AT t_axis_data INTO wa_t_axis_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_axis_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
Thanks
Venkat.O

How to move data from 2 internal table to 1 internal table

Can any body send me code that how to move data from 2 internal table into one internal table.
Moderator message : Read ABAP documentation. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 11:45 AM

Hi Mohdarif92;
I don't know your full needs. But general method should be as below code.
Please check exam below code.
Best regards.
data : begin of gt_result.
            ... like mkpf-...
            ... like mkpf-...
            ... like mseg-...
            ... like mseg-...
          end of gt_result
select *
into table gt_mkpf
from mkpf where ...
select *
into table mseg
from mseg where ...
loop at gt_mkpf.
     loop at gt_mseg where ... = mkpf-...
        move-corresponding gt_mkpf to gt_result.
        move-corresponding gt_mseg to gt_result.
        append gt_result
     endloop.
endloop.

Filtering records from one internal table based on ranges in another itab

Hi guys,
I have 1 internal table with set of GL accounts. I have 2nd internal table where lower interval and upper interval of GL accounts
How to filter out records from 1 internal table by comparing with the GL account ranges present in 2nd internal table.
Please reply.

Hi
Create a RANGE for GL Accounts.
LOOP the second Internal Table.
And assign HIGH & LOW to ranges from second ITAB.
And Delete the accounts which are not there in the range.
Use the below code as reference.
DATA: itab TYPE TABLE OF mara WITH HEADER LINE.
DATA: r_matnr TYPE RANGE OF matnr WITH HEADER LINE.
SELECT * FROM mara INTO TABLE itab UP TO 10 ROWS.
r_matnr-sign = 'I'.
r_matnr-option = 'BT'.
r_matnr-low = '000000000016900036'.
r_matnr-high = '000000000016900040'.
APPEND r_matnr.
DELETE itab WHERE matnr NOT IN r_matnr.

Delete duplicate entriess from the internal table its urgent pls help.

Hi friends,
Hope everybody is doing good,Here is m query on delete duplicate data from the intenal table.
I have an internal table which contain data in the following format.
Doc No Comp Cod Vendor Assignment
1500000009 JM11 00000000
1500000008 JM11 20070212(Repeating)
1500000007 JM11 20070212
1500000006 JM11 00000000
1500000005 JM11 00000000
1500000004 JM11 00000000(Repeating)
1500000003 JM11 00000000 (Repeating)
1500000002 JM11 00000000
1500000001 JM11 20050302
1500000000 JM11 00000000
1500000003 JM11 10000088
1500000001 JM11 10000088
1500000030 JM11 10006260
1500000010 JM11 10006269
1500000008 JM11 10006269
1500000006 JM11 10006269
1500000004 JM11 10006269
if you see the document numbers,there are some document number which are repeating here,there are some document numer which contain vendor number but not the assignments,some of the document numbers contain the assignments but not the vendors.
If my internal table contain this kind of data with repeted document numbers than i want the document number which contains only the vendor number.
Pls help me with the appropriate logic,its urgent.
Thanks a lot
mrutyun^

Hi,
<u><b>Deleting Adjacent Duplicate Entries</b></u>
To delete adjacent duplicate entries use the following statement:
DELETE ADJACENT DUPLICATE ENTRIES FROM <itab>
[COMPARING <f1> <f2> ...
|ALL FIELDS].
The system deletes all adjacent duplicate entries from the internal table <itab>. Entries are
duplicate if they fulfill one of the following compare criteria:
Without the COMPARING addition, the contents of the key fields of the table must be
identical in both lines.
If you use the addition COMPARING <f1> <f2> ... the contents of the specified fields <f1>
<f2> ... must be identical in both lines. You can also specify a field <fi> dynamically as
the contents of a field <ni> in the form (<ni>). If <ni> is empty when the statement is
executed, it is ignored. You can restrict the search to partial fields by
specifying offset and length.
If you use the addition COMPARING ALL FIELDS the contents of all fields of both lines
must be identical.
You can use this statement to delete all duplicate entries from an internal table if the table is
sorted by the specified compare criterion.
If at least one line is deleted, the system sets SY-SUBRC to 0, otherwise to 4.
Examples
DATA: BEGIN OF LINE,
COL1 TYPE I,
COL2 TYPE I,
END OF LINE.
DATA ITAB LIKE HASHED TABLE OF LINE WITH UNIQUE KEY COL1.
DO 4 TIMES.
LINE-COL1 = SY-INDEX.
LINE-COL2 = SY-INDEX ** 2.
INSERT LINE INTO TABLE ITAB.
ENDDO.
LINE-COL1 = 1.
DELETE TABLE ITAB: FROM LINE,
WITH TABLE KEY COL1 = 3.
LOOP AT ITAB INTO LINE.
WRITE: / LINE-COL1, LINE-COL2.
ENDLOOP.
The output is:
2 4
4 16
The program fills a hashed table with a list of square numbers. The DELETE
statement delete the lines from the table where the key field COL1 has the contents 1 or 3.
Regards,
Bhaskar

How to collect similar record from the internal table

I need to collect exact matched records from 1 internal table to another internal table by searching 5 fields. I need to have records which are exactly matched for 5 fields. i have written a code wich is mention below it gave me only similar records but not 100% matched record.. would you like to help me. any correction, suggetion,. Will be great help to me.

To get exact match of 5 records, do as follows.
Check whether internal table gives only one record or not after READ statement.If internal table gives more than one entry for READ then the results will be improper.
I think there is no need of READ statement on same internal table within LOOP. I commented the same in code.
sort i_bp_p by title initials name_last idnumber idtype f50code rbcode. "acc_num.
loop at i_bp_p into wa_i_bp_p.
*lv_tabix = sy-tabix.
*read table i_bp_p index lv_tabix into wa_i_bp_p.read table i_but0id into wa_but0id with key idnumber = wa_i_bp_p-idnumber
idtype = wa_i_bp_p-idtype binary search.
if sy-subrc = 0.
read table i_but000 into wa_but000 with key title = wa_i_bp_p-title
initials = wa_i_bp_p-initials
name_last = wa_i_bp_p-name_last binary search.
if sy-subrc = 0.
read table i_but0is into wa_but0is with key f50code = wa_i_bp_p-f50code
rbcode = wa_i_bp_p-rbcode binary search.
if sy-subrc = 0.
move-corresponding wa_i_bp_p to i_bp_p100.
append i_bp_p100.
endif.
endif.
endif.
endloop.
sort i_bp_p100 by partner.
loop at i_bp_p100.
write : /10 i_bp_p100-partner,
20 i_bp_p100-title,
30 i_bp_p100-initials,
40 i_bp_p100-name_last,
53 i_bp_p100-idnumber,
70 i_bp_p100-idtype,
85 i_bp_p100-rbcode,
95 i_bp_p100-f50code.
endloop.
sort i_bp_p by title initials name_last idnumber idtype f50code rbcode. "acc_num.
loop at i_bp_p into wa_i_bp_p.
lv_tabix = sy-tabix.
read table i_bp_p index lv_tabix into wa_i_bp_p.
if sy-subrc = 0.
read table i_but0id into wa_but0id with key idnumber = wa_i_bp_p-idnumber
idtype = wa_i_bp_p-idtype binary search.
if sy-subrc = 0.
read table i_but000 into wa_but000 with key title = wa_i_bp_p-title
initials = wa_i_bp_p-initials
name_last = wa_i_bp_p-name_last binary search.
if sy-subrc = 0.
read table i_but0is into wa_but0is with key f50code = wa_i_bp_p-f50code
rbcode = wa_i_bp_p-rbcode binary search.
if sy-subrc = 0.
move-corresponding wa_i_bp_p to i_bp_p100.
append i_bp_p100.
endif.
endif.
endif.
endif.
endloop.

Extract a value of a fields from an internal table

hello everyone,
i need to extract a value of a fields from an internal table, the fields is in a postion "sy-tabix" that i know, so i need to pick this value without using a loop
thank you.

Like this?
DATA: FIELD1 TYPE C,
FIELD2 TYPE C.
READ TABLE T_TAB INDEX 3.
FIELD1 = T_TAB-FIELD1.
FIELD2 = T_TAB-FIELD2.
Greetings,
Blag.

Distinct values from dynamic internal tabls

Hi All,
I have a dynamic internal tables like <dy_table> , i want to get distinct values from this internal tables,
how to do that, structure of dynamic internal tables is dynamic acc. to user conditions.
regards,
Anuj

Hi Anuj
Just try this,
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = tb_fields_for_it
IMPORTING
ep_table = gp_dyn_table.
ASSIGN gp_dyn_table->* TO <gt_table>.
ASSIGN LOCAL COPY OF INITIAL LINE OF <gt_table> TO <fs_table>.
LOOP AT tb_output.
*To assign value for serial number.
ASSIGN COMPONENT 1 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-sno.
UNASSIGN <ls_field>.
*To assign value for Sales Organization.
ASSIGN COMPONENT 2 OF STRUCTURE <fs_table> TO <ls_field>.
<ls_field> = tb_output-vkorg.
UNASSIGN <ls_field>.
*To assign Rate for its respective Condition type.
LOOP AT tb_konp WHERE knumh = tb_output-knumh.
READ TABLE tb_fieldcat1 WITH KEY fieldname = tb_output-kschl.
IF sy-subrc EQ 0.
lv_count = tb_fieldcat1-col_pos.
ASSIGN COMPONENT lv_count OF STRUCTURE <fs_table> TO <ls_field>.
IF tb_konp-konwa EQ '%'.
tb_konp-kbetr = tb_konp-kbetr / co_10.
<ls_field> = tb_konp-kbetr.
ELSE.
<ls_field> = tb_konp-kbetr.
ENDIF.
ENDIF.
ENDLOOP.
lv_count = lv_count + 1.
APPEND <fs_table> TO <gt_table>.
CLEAR <fs_table>.
ENDLOOP.
Hope this proves helpful to you.

How to split all the fields of output ls-l from an internal table

Hi all,
Using ls-l command i have brought the file attributes of a file like its read and write permissions,creation date ,path etc in a internal table.
Now how to split all these fields from the internal table or what should be the splitting criteria.
The field contents of internal table are like this:
-rw-rw---- 1 devadm sapsys 18360 apr 29......so on
I want to split this into different fields.
Kindly suggest.
Thank You.

Hi,
I think the delimiter will be space. For date alone (Apr 29) you need to concatenate after the string has been split.
Thanks and regards,
S. Chandramouli

How do I select a range of rows from an internal table in the debugger?

Hi,
I have a case where I wanted to delete a range of rows (several thousand) from an internal table using the debugger.
It seems that rows can only be selected one at a time by selecting (clicking) on the far left side of the row.
This is cumbersome, if not impossible when wishing to delete several thousand rows.
Other tools, such as Excel for example, allow for selecting a range of rows by selecting the first row and then holding the SHIFT key and selecting the last row and all rows in between will be selected.
I can't seem to find the combination of keys that will allow this in the table (or structure) tab of the debugger.
Is it possible to select a range of rows without having to select each row one at a time?
Thanks for your help,
Andy

While it's a Table Control and should/could have a button to select all fields (or visible fields)...I don't think we can do it right now...I know it's a pain to select each row one at a time...but I don't we have any more options...
Greetings,
Blag.

Creating MS- Access data base from the Internal tables data of an ABAP Prog

Hi,
I have a requirement where I have to create Access tables from the Internal tables of ABAP program.
The tables are like Project systems Header data, WBS elements data, Netwrok data, Activity data, Milestone data and Project revunes. I will have the internal tables for these. I want to transfer these tables data into MS-Access tables onto Users desktop.
Please adivce me how to do this.
Thanks,
Prabhakar

HI,
I am trying to create a DB table in the access but I am not successful. The following is the format of the table needs to be created from the ABAP program.
I have created a table with the following format in MS-Access with the name tblHeader. Is it neccessary to create a DB table ( MS-Access) in advance or by using the FM STRUCTURE_EXPORT_ TO_MSACCESS we need to create a structure in MS-Access?
False tblHeader
Field Name Type Length
ProjectDef Text 255
ProjectDes Text 255
Created Text 50
Change Text 50
RespPerson Text 255
Profile Text 255
Plant Text 255
ObjNo Text 255
OverheadKey Text 255
I have created a Z table ZTAB1 with the same format from the SAP fields.
MS-Access Table name : tblHeader
ABAP program Internal table : t_tblheader
Z table Name : ZTAB1.
First I am trying to create a structure in MS-Access with the following FM.
CALL FUNCTION 'STRUCTURE_EXPORT_ TO_MSACCESS'
EXPORTING
dbname = 'D:\test\db2'
LANGU = SY-LANGU
dest = 'PS_ACCESS_1'
TABLES
tabname = ttblheader
EXCEPTIONS
system_failure = 1
comm_failure = 2
OTHERS = 3
Table ttblheader type is DFIES and I am filling the table with only one record and one field i.e TABNAME and the value is ZTAB1.
The source code of the FM is using another FM
CALL FUNCTION 'MSACCESS_STRUCT_ EXPORT_RFC' DESTINATION DEST
Here I am getting the Error message Object required. I can't able to create a table structure in MS-Access.
Next I am going to Use the FM
'TABLE_EXPORT_ TO_MSACCESS'
and it will create the records in the MS-access table.
CALL FUNCTION 'TABLE_EXPORT_ TO_MSACCESS'
EXPORTING
dbname = 'D:\test\db2'
langu = sy-langu
dest = 'PS_ACCESS_2'
tabname = 'ZTAB1'
reftable = 'tblheader'
FLG_NO_DOWNLOAD = ' '
FLG_APPEND = ' '
FLG_POPUP = ' '
TABLES
dtab = t_tblheader
here t_tblheader is the internal table.
Reftable = tblheader is the table which i have created in advance. ( not by using the First FM)
In this FM i am getting a error message : Unable to connect to Database D:\test\db2.
Please help me how to create the MS-Access database.

How to get data from an internal table in some other program

I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross Wang

Hi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
    WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
        bukrs TYPE t001-bukrs,
        butxt TYPE t001-butxt,
      END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
    EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O

How to scan data from one internal table to another

Hi All,
let me know how to scan all from one internal table to another internal table. Pls provide me the syntax and code.
i am very thankful to you all in advance.
Thanks & Regards,
Nagarjuna.

if u want to copy data from itab1 to itab2 then use
itab2[] = itab1[].
if u want to compare whether both itab1 and itab2 are same or not,use
if itab1[] = itab2[].
*--same
else.
*--not same
endif.
if u want to compare itabs based on primary key....
loop at itab1.
read table itab2 with key f1 = itab1-f1.
if sy-subrc <> 0.
*--not same....
endif.
endloop.
if u want to copy only few lines(say from 1 to 3) of itab1 to itab2 then use...
append lines of itab1 from 1 to 3 to itab2.
if internal tables don't have same structure,
say only fields f1 and f2 are common,then
loop at itab1.
itab2-f1 = itab1-f1.
itab2-f2 = itab1-f2.
append itab2.
clear itab2.
endloop.
if there are many common fields then...
loop at itab1.
move-corresponding itab1 to itab2.
append itab2.
clear itab2.
endloop.
Please don't forget to reward points....!!!
Regards
vasu

How to download data from an internal table to a text

Hi All,
I want to download data from an internal table to a text file.
The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
The sample of the desired data that i require should be this way:-
13456TR|M|COUP|MATERIAL|KGS
Thanks in advance.
Regards
Satish.

Hi,
Try this..
REPORT zc1download message-id zc1dwnmsg.
*& Declaration Section for the Tables *
TABLES: makt.
*& Declaration Section for the Internal Tables
DATA: intab TYPE TABLE OF makt,
      wa_intab LIKE LINE OF intab,
      no_of_rec TYPE i,
      count TYPE i.
DATA: BEGIN OF f_intab,
        str(255) TYPE c,
      END OF f_intab.
DATA: t_intab LIKE TABLE OF f_intab,
      w_intab LIKE LINE OF t_intab,
      temp(255) TYPE c.
FIELD-SYMBOLS: <f> TYPE ANY.
*& Selection ScreenSection for the file download
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
            tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
            others RADIOBUTTON GROUP rad1,
            delimit TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
IF file IS INITIAL. " check to ensure file.
    MESSAGE i001.
    EXIT.
ENDIF.
IF others = 'X'.    " check to ensure delimiter.
    IF delimit = ' '.
      MESSAGE i002.
      EXIT.
    ENDIF.
ENDIF.
SELECT * FROM makt INTO TABLE intab.
IF tab = 'X'.       " default delimiter tab is used
      CALL FUNCTION 'WS_DOWNLOAD'
      EXPORTING
        filename                = file
        filetype                = 'DAT'
        mode                    = 'A'
      TABLES
        data_tab                = intab
      EXCEPTIONS
        file_open_error         = 1
        file_write_error        = 2
        invalid_filesize        = 3
        invalid_type            = 4
        no_batch                = 5
        unknown_error           = 6
        invalid_table_width     = 7
        gui_refuse_filetransfer = 8
        customer_error          = 9
        no_authority            = 10
        OTHERS                  = 11.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ELSE.             " If user defind delimiter is to be used
              Counts the number of fields                *
    DO.
      ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
      IF sy-subrc <> 0.
        EXIT.
      ELSE.
        count = count + 1.
      ENDIF.
    ENDDO.
    LOOP AT intab INTO wa_intab.
      DO count TIMES. " Adding the delimiter in required places
        ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
        CONCATENATE temp delimit <f> INTO temp.
      ENDDO.
      SHIFT temp.
      APPEND temp TO t_intab.
      CLEAR temp.
    ENDLOOP.
    CALL FUNCTION 'WS_DOWNLOAD'
      EXPORTING
        filename                = file
        filetype                = 'ASC'
        mode                    = 'A'
      TABLES
        data_tab                = t_intab
      EXCEPTIONS
        file_open_error         = 1
        file_write_error        = 2
        invalid_filesize        = 3
        invalid_type            = 4
        no_batch                = 5
        unknown_error           = 6
        invalid_table_width     = 7
        gui_refuse_filetransfer = 8
        customer_error          = 9
        no_authority            = 10
        OTHERS                  = 11.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
ENDIF.
WRITE:/ 'The Data has been tranfered to :', file.
Cheers
Kathir!~

Simple logic from below internal tables

Similar Messages

Maybe you are looking for