Simple Question: Procedure parameters are same as table column names.

Hi All,
I'm having following procedure
CREATE OR REPLACE PROCEDURE eb_test_update
emp_no IN NUMBER := NULL,
emp_name IN VARCHAR2 := NULL,
return_status OUT VARCHAR2
AS
l_emp_name VARCHAR2(50);
BEGIN
l_emp_name := emp_name;
return_status := 'Success';
DBMS_OUTPUT.PUT_LINE('emp_name::'|| emp_name);
DBMS_OUTPUT.PUT_LINE('emp_no::'|| emp_no);
BEGIN
UPDATE EMP
SET EMP.emp_name = emp_name,
EMP.join_date = SYSDATE
WHERE EMP.emp_no = emp_no;
COMMIT;
EXCEPTION WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE('INSIDE EXCEPTION BLOCK::');
return_status := 'Fail';
ROLLBACK;
END;
END eb_test_update;
I'm executing this procedure passing below values
DECLARE
RETURN_STATUS VARCHAR2(100) := NULL;
BEGIN
eb_test_update(
EMP_NAME => 'srini',
EMP_NO => 12345,
RETURN_STATUS => RETURN_STATUS
DBMS_OUTPUT.PUT_LINE('RETURN_STATUS::' || RETURN_STATUS);
END;
It is not giving any error but it is not updating EMP_NAME column in EMP table, no idea how to resolve this issue. If I use l_emp_name it works fine...I don't want to change parameter names for calling procedure...
Can anyone please suggest me how to resolve this issue...I thought making alias name for table name will work but facing same problem...
Thanks in advance.
Regards,
Sharath.

Boneist wrote:
sybrand_b wrote:
Also you should not commit inside a procedureAt the risk of taking this off-topic, I disagree. Commit/Rollbacks need to go at the end of a transaction, and if that transaction is started and finished within a procedure (eg. automomous transactions for logging errors/debug, etc) then that is the right place for the commit/rollback. IMO, anyway.I'm with sybrand_b in this case. To decide about commit (or sometimes rollback) is a user task. There are exceptions to this rule and you named already some of them. And there are more of such. You could also add batch jobs that run without user interaction, bank transactions, etc. However in this specific case we do not have any indication that the op is talking about such an exception to the general rule.

Similar Messages

If variable name is the same as the column name in procedure ?

If variable name is the same as the column name in procedure , What should i do?
For Example :
CREATE OR REPLACE PROCEDURE "TEST_PROC" (MIN_SALARY in UMBER)
as
begin
INSERT INTO TEST SELECT JOB_ID,MIN_SALARY FROM JOBS WHERE MIN_SALARY = MIN_SALARY;
end;

You could follow a better naming convention and have the parameters to the procedures named in a way so as not to be confused with column names.
You could prefix the variable names with the name of the procedure they appear in but then what if your have procedure names same as table names?
SQL> create or replace procedure test_proc(sal in number) is
2    cnt number ;
3 begin
4    select count(*) into cnt from scott.emp where scott.emp.sal = test_proc.sal ;
5    dbms_output.put_line('cnt='||cnt) ;
6 end ;
7 /
Procedure created.
SQL> set serveroutput on
SQL> exec test_proc(800) ;
cnt=1
PL/SQL procedure successfully completed.
SQL>If you search you can find several posts here itself on naming convention to avoid such issues in first place.

How to use simple types for table column names ?

Hi,
can any one tell how to to use simple types for table column names?
It is required in internationalizing of webdynpro applications.
Regards,
Rajesh

Hi,
1: define required column names in <SimpleType>
2:use the following code to get those values
3:bind 'text' property of Column headers to context attributes
4:take a context attribute 'Value' as type of <SimpleType>
5:set these values to context attributes
IWDAttributeInfo objAttrInfo=wdContext.getNodeInfo().getAttribute(IPrivate<ViewName>View.IContextElement.VALUE);
ISimpleTypeModifiable simple=objAttrInfo.getModifiableSimpleType();
Map m=simple.getEnumerationTexts();
Collection c=m.values();
Iterator it=c.iterator();
if(it.hasNext())
wdContext.currentContextElement.set<att1>(it.next().toString);
if(it.hasNext())
wdContext.currentContextElement.set<att2>(it.next().toString);
if(it.hasNext())
wdContext.currentContextElement.set<att3>(it.next().toString);
Regards
LakshmiNarayana

Remain case for table column name

Hello, i am a java developer. I had helped my company to develop a java application all the while and before this we are using ms sql server database. Recently, we want to migrate the database to oracle database. The problem is, in our application, we use the resultsetmetadata to retrieve all the table column name and respective data and store in hashtable, but in ms sql server the table column name is not all in uppercase. When our application try to get the data using hashtable.get("aColumnName"), it will fail because in oracle the column name is all in uppercase. There are more than 1000 jsp page and java code that used the same method to get data, so if i want to change all the code to uppercase, it will consume a lot of unproductive time, is there any way to solve this?

I assume that your code builds an SQL statement like "select * from ??? where table_name = '????';".
If this is correct just wrap the table_name in UPPER(table_name).
If my assumption is incorrect then please give more information.
James.

I need the "Real" Table / Table Column names from a sql view

Firstly, we have a system with ~1000 tables and ~250 views. We have field level security on the table columns (in our code)
Now we have a lot of views which select data from the tables, but I need to get the "Table Column Name" that is linked in the view.
I know there are view columns that is not linked to a specific table column, (or concatenation of columns) so those columns can just return NULL.
From the sample you will see there is a view selecting data from another view. I know it is not the best sql performance (execution path) but that is another topic on its own.
I went through a lot of the sys.* stored procs or sys.* views to try and figure out if there is a view that we can use to get the expected results.
here is the sql code:
if
Exists (select
* from
sys.all_objects
where name =
'AliasView2')
drop view dbo.AliasView2
if
Exists (select
* from
sys.all_objects
where name =
'AliasView1')
drop view dbo.AliasView1
if
Exists (select
* from
sys.all_objects
where name =
'Table4')
BEGIN
alter table dbo.Table4
DROP CONSTRAINT [FK_T4_T3]
alter table dbo.Table4
DROP CONSTRAINT [PK_T4_Constraint]
drop table dbo.Table4
END
if
Exists (select
* from
sys.all_objects
where name =
'Table3')
BEGIN
alter table dbo.Table3
DROP CONSTRAINT [FK_T3_T2]
alter table dbo.Table3
DROP CONSTRAINT [PK_T3_Constraint]
drop table dbo.Table3
END
if
Exists (select
* from
sys.all_objects
where name =
'Table2')
BEGIN
alter table dbo.Table2
DROP CONSTRAINT [FK_T2_T1]
alter table dbo.Table2
DROP CONSTRAINT [PK_T2_Constraint]
drop table dbo.Table2
END
if
Exists (select
* from
sys.all_objects
where name =
'Table1')
BEGIN
alter table dbo.Table1
DROP CONSTRAINT [PK_T1_Constraint]
drop table dbo.Table1
END
create
Table dbo.Table1
T1_PK        int
NOT NULL
Identity(1, 1)
CONSTRAINT [PK_T1_Constraint]
PRIMARY KEY (T1_PK),
T1_Field1    varchar
NULL,
T1_Field2    varchar
NULL,
create
Table dbo.Table2
T2_PK        int
NOT NULL
Identity(1, 1)
CONSTRAINT [PK_T2_Constraint]
PRIMARY KEY (T2_PK),
T2_Field1    varchar
NULL,
T2_Field2    varchar
NULL,
T2_FK        int
NOT NULL
CONSTRAINT [FK_T2_T1]
FOREIGN KEY (T2_FK)
REFERENCES dbo.Table1
(T1_PK)
create
Table dbo.Table3
T3_PK        int
NOT NULL
Identity(1, 1)
CONSTRAINT [PK_T3_Constraint]
PRIMARY KEY (T3_PK),
T3_Field1    varchar
NULL,
T3_Field2    varchar
NULL,
T3_FK        int
NOT NULL
CONSTRAINT [FK_T3_T2]
FOREIGN KEY (T3_FK)
REFERENCES dbo.Table2
(T2_PK)
create
Table dbo.Table4
T4_PK        int
NOT NULL
Identity(1, 1)
CONSTRAINT [PK_T4_Constraint]
PRIMARY KEY (T4_PK),
T4_Field1    varchar
NULL,
T4_Field2    varchar
NULL,
T4_FK        int
NOT NULL
CONSTRAINT [FK_T4_T3]
FOREIGN KEY (T4_FK)
REFERENCES dbo.Table3
(T3_PK)
GO
--Create a basic view to select some data
CREATE
VIEW dbo.AliasView1
AS
select
t2.T2_FK as Table2_ForeignKey,
t1.T1_Field1 as Table1_FieldOne,
t2.T2_Field1 as Table2_FieldOne
FROM Table1 t1
Left outer
join Table2 t2 on t2.T2_FK
= t1.T1_PK;
GO
--Create another view that select basic data, and also selecting data from view 1
CREATE
VIEW dbo.AliasView2
AS
select
v1.Table1_FieldOne
as Table1_FieldOne,
v1.Table2_FieldOne
as Table2_FieldOne,
t3.T3_Field1 as Table3_FieldOne,
t3.T3_Field2
FROM Table3 t3
Left outer
join AliasView1 v1 on v1.Table2_ForeignKey
= t3.T3_PK;
GO
--My attempt to get the desired output, but no luck
SELECT
col.COLUMN_NAME as AliasColumnName, col.DATA_TYPE, col.CHARACTER_MAXIMUM_LENGTH
as max_length, colu.*
FROM
information_schema.COLUMNS col
left
outer join
(SELECT
VIEW_SCHEMA, VIEW_NAME, COLUMN_NAME,
min(TABLE_NAME)
as TABLE_NAME
FROM information_schema.VIEW_COLUMN_USAGE colu
WHERE VIEW_NAME =
'AliasView2'
Group by VIEW_SCHEMA, VIEW_NAME, COLUMN_NAME
) COLU ON colU.VIEW_NAME
= col.TABLE_NAME
and colu.COLUMN_NAME
= col.COLUMN_NAME
left
outer join
(select a.name
as TableName, c.name
as FieldName
from sys.foreign_key_columns fk
join sys.all_objects a
on a.object_id
= fk.parent_object_id
join sys.all_columns c
on c.object_id
= a.object_id
and c.column_id
= fk.parent_column_id
join sys.all_objects ar
on ar.object_id
= fk.referenced_object_id
join sys.all_columns cr
on cr.object_id
= ar.object_id
and cr.column_id
= fk.referenced_column_id
join sys.schemas scr
on scr.schema_id
= ar.schema_id
) fks on fks.TableName
= colu.TABLE_NAME
and fks.FieldName
= colu.COLUMN_NAME
WHERE COL.TABLE_NAME
= 'AliasView2'
order
by col.ORDINAL_POSITION
This is the results being returned: (That is not 100% what I am looking for)
AliasColumnName
DATA_TYPE
max_length
VIEW_SCHEMA
VIEW_NAME
COLUMN_NAME
TABLE_NAME
Table1_FieldOne
varchar
1
dbo
AliasView2
Table1_FieldOne
AliasView1
Table2_FieldOne
varchar
1
dbo
AliasView2
Table2_FieldOne
AliasView1
Table3_FieldOne
varchar
1
NULL
NULL
NULL
NULL
T3_Field2
varchar
1
dbo
AliasView2
T3_Field2
Table3
The desired results must be like the following:
AliasColumnName
DATA_TYPE
max_length
VIEW_SCHEMA
VIEW_NAME
COLUMN_NAME
TABLE_NAME
Table1_FieldOne
varchar
1
dbo
AliasView2
T1_Field1
Table1
Table2_FieldOne
varchar
1
dbo
AliasView2
T2_Field1
Table2
Table3_FieldOne
varchar
1
dbo
AliasView2
T3_Field1
Table3
T3_Field2
varchar
1
dbo
AliasView2
T3_Field2
Table3
NOTE: the COLUMN_NAME and TABLE_NAME must the REAL field of the TABLE it belongs to and not only ONE LEVEL Higher’s ALIAS View Name

Now we have a lot of views which select data from the tables, but I need to get the "Table Column Name" that is linked in the view.
If you are using SQL Server 2012/2014, then you can use
sys.dm_exec_describe_first_result_set (Transact-SQL) to gte the informations.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Please help me I am not seeing Database table column names in field explorer view

Hi,
I am developing a crystal report using eclipse and sql server. After creating connection, when i drag and drop tables, The table name and its columns should apper in field explorer view. Then we drag the columns onto crystal report. Unfortunately I am just seeing only table names but not column names in field explorer view. Could anyone help me?
After downloading eclipse I have plugged in the crystal report using the following instructions
1. Click on the Help menu, and then Software Updates > Find and Install... to open the Install/Update wizard.
2. Select Search for new features to install and click Next.
3. Click the New Remote Site button. This will launch the New Update Site wizard
4. Type the Business Objects Updsate Site for the Name field and the following for the URL: http://www.businessobjects.com/products/dev_zone/eclipse/
5. Click OK to complete the wizard.
6. Enable the newly created Business Objects Update Site checkbox as well as the Callisto Discovery Site (which should appear by default with Eclipse 3.2) and click Finish.
Expand the Business Objects Update Site node and enable the Crystal Reports for Eclipse 1.0.0v555 checkbox.
8. Expand the Callisto Discovery Site and click the button "Select Required". This will automatically select the required Eclipse features necessary to successfully install Crystal Reports for Eclipse.
Thank You
Rajavardhan Sarkapally

Now we have a lot of views which select data from the tables, but I need to get the "Table Column Name" that is linked in the view.
If you are using SQL Server 2012/2014, then you can use
sys.dm_exec_describe_first_result_set (Transact-SQL) to gte the informations.
Olaf Helper
[ Blog] [ Xing] [ MVP]

How to modify a table column name

Hi all,
How to modify a table column name...
Thanks

could type the command here... but will not do that..because you are supposed to read the docs.
You can find the command here..
http://www.faqs.org/docs/ppbook/r22871.htm
Regards,
G.

Syntax of DDL options and related (table) column names

Hi,
where can I find something like a mapping between DDL options and related table column names?
For example I do have the table options PCTFREE, FREELISTS and NOCOMPRESS. The related table columns out of user_tables are PCT_FREE, FREELIST and COMPRESS.
PCT(_)FREE wins an Underscore, FREELIST(S) wins an "S" and it is "NOCOMPRESS" if COMPRESS has a value "Y(es)".
Hope somebody can help.

So far I didn't find any information that is not in
the DDL script gernerated from
DBMS_METADATA.get_DDL.Alright, I give you an example:
I create a table with the following DDL:
"CREATE TABLE IntBuch (
int_bunr integer NOT NULL,
int_sdat double precision NOT NULL,
int_hblz char(8) NOT NULL,
int_hkto char(7) NOT NULL,
int_hdat double precision NOT NULL,
KtoNr char(7) NOT NULL,
BLZ char(8) NOT NULL,
CONSTRAINT PK_IntBuch PRIMARY KEY (int_bunr)
USING INDEX
PCTFREE 10
STORAGE (
INITIAL 1000
NEXT 500
PCTINCREASE 0
MINEXTENTS 1
MAXEXTENTS 4096
PCTFREE 20
LOGGING
CREATE UNIQUE INDEX intid
ON IntBuch (int_bunr DESC)
CREATE INDEX hkto
ON IntBuch (int_hblz,int_hkto)
COMMENT ON TABLE IntBuch
IS 'Kommentar zu DB-Tabelle InBuch'
COMMENT ON COLUMN IntBuch.int_sdat IS 'Kommentar zu DB-Spalte int_sdat'
ALTER TABLE IntBuch
ADD CONSTRAINT Gutschrift FOREIGN KEY (int_hkto,int_hblz) REFERENCES Konto
ON DELETE CASCADE
ADD FOREIGN KEY (KtoNr,BLZ) REFERENCES Konto
ADD FOREIGN KEY (int_bunr) REFERENCES Buchung
ON DELETE CASCADE
After that I read the DDL with DBMS_METADATA.get_DDL and I get
" CREATE TABLE "UOENDE"."INTBUCH"
( "INT_BUNR" NUMBER(*,0) NOT NULL ENABLE,
 "INT_SDAT" FLOAT(126) NOT NULL ENABLE,
 "INT_HBLZ" CHAR(8) NOT NULL ENABLE,
 "INT_HKTO" CHAR(7) NOT NULL ENABLE,
 "INT_HDAT" FLOAT(126) NOT NULL ENABLE,
 "KTONR" CHAR(7) NOT NULL ENABLE,
 "BLZ" CHAR(8) NOT NULL ENABLE,
 CONSTRAINT "PK_INTBUCH" PRIMARY KEY ("INT_BUNR")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 16384 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
 CONSTRAINT "GUTSCHRIFT" FOREIGN KEY ("INT_HKTO", "INT_HBLZ")
 REFERENCES "UOENDE"."KONTO" ("KTONR", "BLZ") ON DELETE CASCADE ENABLE,
 FOREIGN KEY ("KTONR", "BLZ")
 REFERENCES "UOENDE"."KONTO" ("KTONR", "BLZ") ENABLE,
 FOREIGN KEY ("INT_BUNR")
 REFERENCES "UOENDE"."BUCHUNG" ("BU_NR") ON DELETE CASCADE ENABLE
) PCTFREE 20 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS"
If there are no more DDLOptions possible than that, it is fine for me. If not, but all kinds of options are to find in only one or two tables of the database ( user_tables for table options, dba_constraints and dba_segments for column options, primary and foreign keys, user_indexes and user_segments for indexes ...), that is fine for me, too. (As long as I get to know which tables are "sufficient" for that.) If it is different than both of that, that's bad.
However if you want to use defaults instead of
absolut values, it is better to remove certain parts,
like the storage clause, from the generated output.I understand this, but I am more interested to have all and not leaving out some of them in order to have the defaults in the database after running the DDL.
A totally different approach could be to
a) create a database link from one DB to another.
b) create table <new_table> as select * from
<old_table@dbLink> where 1=2;I keep that in mind, thanks for that hint.

Finding source database table/column name for a column in a view

Hi i need to be able to identify the original database table/column name for a column in a view.
e.g. say i have a view like this
create v1 as select a.name fname, b.name bname, c.name cname,......
from u1.names a, u2.names b. u3.names c
where .....
Now I want to find out that the database table/column name for the fname, bname and cname columns in the view v1, which in this instance is u1.name.name, u2.names.name, u3.names.name.
But i need to be able to do it for any view. Short of parsing the SQL is there an easy way of doing this?
Now obviusly I can't do this for virtual columns but I will know my column is not virtual as it has an index on it.

But i need to be able to do it for any view. Short of
parsing the SQL is there an easy way of doing this?No, parsing the SQL is the only way. Good luck it is not something I would want to attempt.

Function with for loop and parameter table/column names ... syntax help

I'm trying to create a function that returns the distinct values and counts from a user defined schema/table/column.
The code below defines an object type [stats_on_column_obj] and creates a single table of this type [stats_on_column_tab].
The function is supposed to take three input variables: p_schema_name, p_table_name, p_column_name and return a table (above).
I can hard code a SELECT statement into the () ... but once I try to convert it to parameters & exec immediate I am stuck. The red section is where the issue is (i think).
Oracle 10g.
CREATE TYPE stats_on_column_obj IS OBJECT(
COL_VAL VARCHAR2(500),
COL_VAL_CNT NUMBER (7)
CREATE TYPE stats_on_column_tab IS TABLE OF stats_on_column_obj;
CREATE OR REPLACE FUNCTION get_STATS_ON_COLUMN
 p_schema_name IN varchar2,
 p_table_name IN varchar2,
 p_column_name IN varchar2
 RETURN STATS_ON_COLUMN_tab
IS
 l_STATS_ON_COLUMN_tab STATS_ON_COLUMN_tab := STATS_ON_COLUMN_tab ();
 n INTEGER := 0;
 str_select_tbl varchar2(5000);
BEGIN
 str_select_tbl := 'SELECT '||p_column_name||' as col_val, count(*) as col_val_cnt FROM '||p_schema_name||'.'||p_table_name||' group by '||p_column_name;
 FOR r IN (str_select_tbl)
 LOOP
 l_STATS_ON_COLUMN_tab.EXTEND;
 n := n + 1;
 l_STATS_ON_COLUMN_tab (n) := STATS_ON_COLUMN_obj (r.col_val, r.col_val_cnt);
 END LOOP ;
 RETURN l_STATS_ON_COLUMN_tab;
END;
[Error] PLS-00103 (124: 4): PLS-00103: Encountered the symbol "LOOP" when expecting one of the following: * & - + / at mod remainder rem .. <an exponent (**)> || multiset year DAY_
[Error] PLS-00103 (126: 9): PLS-00103: Encountered the symbol "=" when expecting one of the following: constant exception <an identifier> <a double-quoted delimited-identifier> table LONG_ double ref char time timestam
[Error] PLS-00103 (127: 29): PLS-00103: Encountered the symbol "(" when expecting one of the following: constant exception <an identifier> <a double-quoted delimited-identifier> table LONG_ double ref char time timestam
[Error] PLS-00103 (128: 4): PLS-00103: Encountered the symbol "END" when expecting one of the following: begin function package pragma procedure subtype type use <an identifier> <a double-quoted delimited-identifier> form
SELECT * FROM TABLE (get_STATS_ON_COLUMN('SCHEMAS_X','TABLE_X','COLUMN_X'));

SCOTT@orcl > CREATE OR REPLACE
2 FUNCTION get_STATS_ON_COLUMN(
3 p_schema_name IN varchar2,
4 p_table_name IN varchar2,
5 p_column_name IN varchar2
6 )
7 RETURN STATS_ON_COLUMN_tab
8 IS
9 v_STATS_ON_COLUMN_tab STATS_ON_COLUMN_tab := STATS_ON_COLUMN_tab ();
10 v_n INTEGER := 0;
11 v_str_select_tbl VARCHAR2(5000);
12 BEGIN
13 v_str_select_tbl := 'SELECT stats_on_column_obj(' || p_column_name || ',count(*)) FROM ' ||
14 p_schema_name || '.' || p_table_name || ' group by ' || p_column_name;
15 EXECUTE IMMEDIATE v_str_select_tbl
16 BULK COLLECT
17 INTO v_STATS_ON_COLUMN_tab;
18 RETURN v_STATS_ON_COLUMN_tab;
19 END;
20 /
Function created.
SCOTT@orcl > select *
2 from table(
3 get_STATS_ON_COLUMN(
4 'SCOTT',
5 'EMP',
6 'JOB'
7 )
8 )
9 /
COL_VAL COL_VAL_CNT
CLERK 4
SALESMAN 4
PRESIDENT 1
MANAGER 3
ANALYST 2
SCOTT@orcl >
Or better change it to pipelined function.
SY.

BUG: Export DDL and Data fails for mixed case table/column names

Hi there,
I have found a bug in SQL Developer. See details below.
Description:
When "Export DDL and Data) function is used on a table/columns not named in UPPERCASE, sql generated by SQL Developer is invalid.
Steps to reproduce:
- open SQL Developer, connect to DB
- make a table named "lowerCase" (in double quotes, so it won't be automatically changed to capital letters)
- you may also add some columns, for example "lowerCol1", "UpCol2", ALLUPCOL3
- add some data rows to the table
- choose Tools -> Export DDL and Data
- check exporting of tables and data, on "filter" tabs choose your "lowerCase" table
- press "Apply"
Error:
Generated SQL contains invalid INSERTs: mixed-case table and columns are referenced without obligatory double quotes, which yields an error when generated script is executed (see below, relevant line is underlined)
-- DDL for Table lowerCase
CREATE TABLE "DBO_HT"."lowerCase"
(     "lowerCol1" VARCHAR2(100),
     "UpCol2" VARCHAR2(100),
     "ALLUPCOL3" VARCHAR2(100)
-- DATA FOR TABLE lowerCase
-- FILTER = none used
-- INSERTING into lowerCase
Insert into lowerCase (lowerCol1,UpCol2,ALLUPCOL3) values ('lc','uc','auc');
-- END DATA FOR TABLE lowerCase
Remarks
SQL Developer: version 1.2.1, build MAIN-32.13
Oracle DBs: 9.2 & Express
OS: Windows 2000 Professional
If you need any more details/testing, let me know. I'd really appreciate a quick patch for this issue...
Alternatively, do you know of any other simple way of copying a single database (it's called a schema in Oracle, right?) from one computer to another? Possibly something so simple like detaching->copying->reattaching mdf (data) files in SQL Server... I thought that this "Export DDL&Data" function will do, but as you can see I couldn't use it.
I just need a simple solution that works - one operation on source to stuff, get the resulting files to other computer and one operation to have it running there... I think that such scenario is very basic, yet I just can't achieve it and I am simply not allowed to spend more time on it (read: our test project fails, my company rejects my "lobbying" and stays with MSSQL :/ )
Thanks a lot & bye

Thanks for your reply.
ad. 1)
You're right. I just wanted to give some very short feedback on my experiences with SQL Developer, so I didn't think starting new threads would be necessary, but as I was writing it became much bigger than I initially planned - sorry about that. I will make proper threads as soon as possible. Having "Edit post" button on this forum would also be useful.
ad. 2)
Generally, you're right - in most cases it's true that "switching DBMS is a major commitment" and "you will produce terrible code" if you don't learn the new one.
However, I think that you miss one part of market here - the market that I think Express is also targeted on. I'd call it a "fire&forget databases" market; MySQL comes to mind as possibly most common solution here. It's the rather small systems, possibly web-accessed, whose data-throughput requirements are rather modest; the point is to store data at all, and not necesarily in fastest way, because given the amount of data that is used, even on low-end hardware it will work well enough. What's important here is its general ease of use - how easy is to set up such system, connect and access data, develop a software using it, how much maintenance is needed, how easy this maintenance is, how easy are the most common development tasks as creating a DB, moving a DB from test to production server etc. There, "how easy" directly translates to "how much time we need to set it up", which translates to "how much will the development will cost".
Considering the current technology, switching the DBMS in such systems is not necesarily a major commitment and believe me that you will not produce terrible code. In many cases it's as simple as changing a switch in your ORM toolkit: hibernate.dialect = Hibernate.Dialect.OracleDialect vs MySQLDialect vs MsSql2005Dialect
Therefore, in some part of market it's easy to switch DBMS, even on project-by-project basis. The reason to switch will appear when other DBMS makes life easier => development faster. From that point of view, I can understand my colleagues giving me an embarassing look and saying "come on, I won't read all these docs just to have db copied to test server". And it doesn't mean "they are not willing to learn anything new", it's just that they feel such basic task should have self-explaining solution that doesn't require mastering any special knowledge. And if they get such simple solutions somewhere else, it costs them nothing to change the hibernate dialect.
I think Oracle did the great job with introducing the Express to this "fire&forget" market. The installation is a snap, it just works out of the box, nothing serious to configure, opposite to what I remember from installing and working on Oracle 9 a few years ago. In some places it's still "you need to start SQL*Plus and enter this script", but it's definitely less than before. I also find the SQL Developer a great tool, it can do most of what we need to do with the DB, it's also much better and pleasant to use over Oracle 9 tools. Still, a few basic things still require too much hassle, and I'd say taking your schema to another machine is one of them. So I think that, if you do it well, the "schema copy wizard" you mentioned might be very helpful. If I was to give any general advice for Express line of DB/tools, I'd say "make things simple" - make it "a DB you can't see".
That's, IMHO, the way to attract more Express users.

How to know a table column name in HTML (Hyperion Interactive Reporting).

Hello,
I have a Hyperion Interactive Reporting dashboard section with an embembed table section on it.
The dashboard it will be open only in HTML.
I put the table as Active, so i can interact with her.
So, what I need to know now is how can I know the column name or number when I double click in one cell of the table.
Can anyone help me with this?
Thank you in advance,
Carlos

Views don't have primary keys though their underlying tables might. You'd need to pick apart the view to determine where it's columns are coming from.
You can select the text of the view in question from user_views.

How to find internal table column names

Hi Friends,
I have declared one internal table with 45 fields.
Here is my situation.
I need to create dynamic table with all above 45 fields and some more fields (approx 10 fields).
I got the solution for creating dynamic table. Only thing is
I have to assign all the above 75 columns to other internal table.
is there any way we can read internal table field names in the program.
we can acheive this by hard coding the all 75 field names.
since it is 75 columns, i want to pass one by one field dynamically to the other table.
Pls give me a solution.
thanks in advance.

HI,
Find the code for dynamical internal table., which helps to increase the fields in the internal table dynamically.
REPORT ZTEST_R3.
FIELD-SYMBOLS: <L_TABLE> TYPE TABLE,
<L_LINE> TYPE ANY,
<L_FIELD> TYPE ANY.
DATA: IS_LVC_CAT TYPE LVC_S_FCAT,
IT_LVC_CAT TYPE LVC_T_FCAT.
DATA: NEW_TABLE TYPE REF TO DATA,
NEW_LINE TYPE REF TO DATA.
START-OF-SELECTION.
IS_LVC_CAT-FIELDNAME = 'KUNNR'.
APPEND IS_LVC_CAT TO IT_LVC_CAT.
IS_LVC_CAT-FIELDNAME = 'NAME1'.
APPEND IS_LVC_CAT TO IT_LVC_CAT.
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IT_LVC_CAT
IMPORTING
EP_TABLE = NEW_TABLE.
*Create a new Line with the same structure of the table.
ASSIGN NEW_TABLE->* TO <L_TABLE>.
CREATE DATA NEW_LINE LIKE LINE OF <L_TABLE>.
ASSIGN NEW_LINE->* TO <L_LINE>.
DO 2 TIMES.
ASSIGN COMPONENT 'KUNNR' OF STRUCTURE <L_LINE> TO <L_FIELD>.
<L_FIELD> = SY-INDEX.
ASSIGN COMPONENT 'NAME1' OF STRUCTURE <L_LINE> TO <L_FIELD>.
<L_FIELD> = 'A'.
INSERT <L_LINE> INTO TABLE <L_TABLE>.
ENDDO.
LOOP AT <L_TABLE> INTO <L_LINE>.
WRITE:/ <L_LINE>.
ENDLOOP.
READ TABLE <L_TABLE> INTO <L_LINE> INDEX 2.
<L_LINE>+10(2) = 'B'.
MODIFY <L_TABLE> FROM <L_LINE> INDEX 2.
LOOP AT <L_TABLE> INTO <L_LINE>.
WRITE:/ <L_LINE>.
ENDLOOP.

How do you get table column names to show one time per page

I have a report where I want the column names to show one time per page.
I have the table with the column names set below the header and above the
'for-each Row'.
When I view the report in PDF format the colunm names show only one time on the first page and on the other pages the column names do not show at all. If I view the report in RTF, the same thing happens, shows column names on the first page, but not on the other pages after that.
I highlighted the table and went to table properties, clicked on ROW tab and then checked (Repeat as header row at the top of each page) and it still does not work for PDF or RTF format. I have looked at other forums with this issue and it doesn't work for me in PDF format.
Could someone tell me what I am doing wrong.....
I appreciate anyone that can help me.
Thank you,
Susie

I figured out what I was doing wrong.
I was creating a seperate table for the column names and not using the table where the column names where created originally. I deleted the column names from the original table and created a seperate table above that table with the column names only.
So I went back to the original table and highlighted the row with the column names and went to table properties/ROW tab/ and clicked (Repeat as header row at the top of each page) and now it works perfectly in PDF format where the column names show one time for each page. Deleted the other table where I had the column names only.
thanks
Susie

Accessing table column names from WAD

Hi All,
 I w ould like to access the column names (the Infoobject name) of a table .
Was playing arnd with the API..SAPBWGetDataProviderDimensions
but it gives only characters column name..
WAS wondering if any of you has any idea to access both the char names as well as KF's.
thnx for your time..
appreciate your inputs/cues..
-Led

You can use the getDimensionName function to get the characteristic texts and infoobject technical name. The following function might help you.
function getDimensionName(n,dp){
 var dim = SAPBWGetDataProviderDimensions(dp);
 var iobjnm = "";
 var str = "";
 if ( dim != null ){
 for( i=0;i<dim.length;i++ ){
 str = dim[0];//setting str equal to the first position in the array
 str.indexOf("__")>-1 ? iobjnm = str.substring( str.indexOf("__")+2, str.length ) : iobjnm = str ;
 if (dim[0]==n ){//this means we have found the property array for the info object we are concerned with
 if (dim[20] == iobjnm)
 return iobjnm
 else if ((dim[20] != "") && (dim[0] != dim[20]))
 return dim[0]
 else
 return dim[0]
 else
 iobjnm="error";
 }//for
 }//if
 return iobjnm;
}//end function
Thanks,
Jeff

Simple Question: Procedure parameters are same as table column names.

Similar Messages

Maybe you are looking for