Simulate Sales Order

Hi,
I am trying to simulate a sales order creation using the function 'BAPI_SALESORDER_CREATEFROMDAT2' with TESTRUN = 'X'.
But i have a problem... i don't have a sales order number, because this is a simulation, but is that normal? How can i see the results of this simulation?
Please help.
Thanks
BR

So... this function in TestRun only provide me information regarding the Return table right????
Also, if i use the BAPI_SALESORDER_SIMULATE, should i get any number or anything more??
My problem is that i need to simulate the VA01 transaction in a Z** transaction more easily to the users to use. So For example if you are creating a sales order by VA01 you can go to document flow, conditions tab, etc, before save the order, i mean before you have a sales order number.
How can i resolve this situation?
Thanks
BR

Similar Messages

Simulate Sales Order and partners function

Hi,
I am using the BAPI: BAPI_SALESORDER_SIMULATE to simulate the sales order creation. Everything is working fine, except the partners determination.
Where should i get all the partners related to that sales order. I want to determine the same that we saw in Partners tab in VA01.
Can you help please? i already tested with the ORDER_PARTNERS table, but i didn't get the point. Could you please explain?
Thanks
Best regards

Ok,
I went to transaction WE20, but i am not understanding what this will help to my requirement.
Can you explain better please?
What i need is to know if it is possible to know all the partners functions when you are simulating a sales order by using the BAPI simulate. I want to simulate the same that happens in VA01 when we are creating a sales order and we go to tab Partners.
Thanks
regards

Sales Order: Simulate Sales Order

Hi to all.
We are on SAP R3 46C version. I need to simulate SD order creation with deferent Terms of payment key in order lines. In 'BAPI_SALESORDER_SIMULATE' no Terms of payment key in line level. Any other way to do it?
Thanks,
Yuval Kaduri
Cellcom Israel.
Message was edited by: Yuval Kaduri
Message was edited by: Yuval Kaduri

Hi,
Check with the other BAPI, SD_SALES_DOCU_CHANGE_SIMULATE, this might help,
Rgds,

BAPI Simulate Sales order issue

When iam using the BAPI for sales order simulation, it is giving the netvalue of item as
NET_VALUE field in the item out table( Description: Net value as num. field - 00000901 equals 9,01 ). How to change that value into actual currency amount ie into vbap-netwr.
In debugging the value is
I_BAPIITEMOUT[1]-NET_VALUE     NUMC 15                   000000000005000.
The actual value should be              P         12
                               value:                       50.0000.

Just we need to divide it by 100.
This is standard method that will be followed by SAP standard programs also.

Function Module for open Purchase Order & Sales Order?

Hi, commonly I read the data from tables and calculate the open quantity for sales order and purchase order, but I want to know, are there any standard function modules for getting the list of open "purchase order" and "sales order" respectively?
Thanks and Regards.

hi Ren,
u can check all these bapi's related to salesorder
BAPI_SALESORDER_CHANGE Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
May be this FM can help you
MB_ADD_PURCHASE_ORDER_QUANTITY (Reading and adding open purchase order quantities)
Regards,
Naveen

Creating sales order using web dynpro JAVA

Hello everyone,
i am new to web dynpro. Can any one tell me how to creating sales order by web dynpro JAVA using BAPI.
Thanks.
Vinita Sharma

Hi...
you can use Adaptive RFC methodology in web dynpro java to work with BAPIs..... these are standard bapi's provided
Here are required Bapis... select which one you want....
BAPISDORDER_GETDETAILEDLIST Sales Order: List of All Order Data
BAPI_ORDER_CHANGE_STATUS_GET Change status for order
BAPI_SALESDOCU_CREATEFROMDATA Creating a Sales Document
BAPI_SALESORDER_CHANGE Sales Order: Change Sales Order
BAPI_SALESORDER_CREATEFROMDAT1 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create sales order, no more maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all orders for customer
BAPI_SALESORDER_GETSTATUS Sales order: Display status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
check this thread SALES ORDER creation using BAPI
sample java program which will call SAP bapi function sales order create
PradeeP

What is the BAPI name to get the details of sales order

hi
what is the BAPI name to get the details of sales order

hI
BAPISDORDER_GETDETAILEDLIST Sales Order: List of All Order Data
BAPI_ORDER_CHANGE_STATUS_GET Change status for order
BAPI_SALESDOCU_CREATEFROMDATA Creating a Sales Document
BAPI_SALESORDER_CHANGE Sales Order: Change Sales Order
BAPI_SALESORDER_CREATEFROMDAT1 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create sales order, no more maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all orders for customer
BAPI_SALESORDER_GETSTATUS Sales order: Display status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
reward points to all helpful answers
kiran.M

Documentation on Creating Sales Order using Web Services

hi,
I can goto ESA Preview system using SAPGUI and create a sales order (using va01 transaction).
I tried to do the similar thing using the WebService (Create Sales order), but have lots of problems.
->Fields used in WebServices are not in sync with what would be if you use the GUI. (example u enter sales region, buyer id, ship address and the items for a standard sales order.
->There is not much documentation on what the fields in the webservice mean. (e.g. what is the difference between BuyerParty and BuyerInternalId? )
->There are no sample combination of values that work. (Belive me it would take hours to figure out right combination of values needed..)
Any hints would be appreciated
Kiran
http://erp.esworkplace.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/smdisplay.asp?id=138ABFEEA8A34999BFCEB31537EC8D65&fragID=&packageid=CBD4F2B708B8144DAEA05442D8FD491E&context=&iv=
http://erp.esworkplace.sap.com/socoview(bD1lbiZjPTgwMCZkPW1pbg==)/smdisplay.asp?id=5640EE01E71B11DAB5240007E9102256&fragID=&packageid=CBD4F2B708B8144DAEA05442D8FD491E&iv=

Hi...
you can use Adaptive RFC methodology in web dynpro java to work with BAPIs..... these are standard bapi's provided
Here are required Bapis... select which one you want....
BAPISDORDER_GETDETAILEDLIST Sales Order: List of All Order Data
BAPI_ORDER_CHANGE_STATUS_GET Change status for order
BAPI_SALESDOCU_CREATEFROMDATA Creating a Sales Document
BAPI_SALESORDER_CHANGE Sales Order: Change Sales Order
BAPI_SALESORDER_CREATEFROMDAT1 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales Order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create sales order, no more maintenance
BAPI_SALESORDER_GETLIST Sales order: List of all orders for customer
BAPI_SALESORDER_GETSTATUS Sales order: Display status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
check this thread SALES ORDER creation using BAPI
sample java program which will call SAP bapi function sales order create
PradeeP

Cloning a PBS Sales Order with BAPI FM?

Hi,
I would like to create a new sales order with data stored stored already inside the PBS online archive.
I thought of 'simply' using a function module but haven't found any suitable yet. Of course there is always a manually way - read all necessary tables and feed e.g. SD_SALESDOCUMENT_CREATE with it.
However, I'm in search of a better method to get this running.
Any hints or suggestions?

Hai Fritz
BAPI_SALESORDER_CHANGE         Sales order: Change Sales Order
BAPI_SALESORDER_CONFIRMDELVRY Sales Order: Confirmation of Delivery; Document Flow Update
BAPI_SALESORDER_CREATEFROMDAT1 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDAT2 Sales order: Create Sales Order
BAPI_SALESORDER_CREATEFROMDATA Create Sales Order, No More Maintenance
BAPI_SALESORDER_GETLIST        Sales order: List of all Orders for Customer
BAPI_SALESORDER_GETSTATUS      Sales Order: Display Status
BAPI_SALESORDER_SIMULATE       Sales Order: Simulate Sales Order
Thanks & regards
Sreenivasulu P

BAPI to get delivery number and Sales order

Dear all,
Is there a standard BAPI that would help me get the delivery number and sales order number when Shipment number is given as an input?
Regards,
Neha.

BAPI_SALESDOCU_CREATEFROMDATA Creating a Sales and Distribution Document
BAPI_SALESORDER_GETSTATUS Sales Order: Display Status
BAPI_SALESORDER_SIMULATE Sales Order: Simulate Sales Order
Reward Points if useful.

Sales Order Net value in Simulate Mode

Hi All,
My client has done upgrade. In new envoirnment pricing procedures/conditions have been update. Requirement is to update all Open Sales Order. I am doing that with bapi_salesorder_change but before the change I need to simulate the Sales Order to compare the NET VALUE (NETWR)at line item and header level, before the update and after the sales order update .. If due to new pricing procedure net value is found different then BAPI_SALESORDER_CHANGE should not be executed.
Hope I explain my problem clearly,. if not I will be glad to provide further explaination. I have tried bapi_salesorder_simulate but it is not giving me expected net value.
Thanks,

Hi Abdul,
SALES_ORDER_SIMULATE will return the values with the current pricing conditions for the material, which the BAPI picks from material master.
I would assume that the upgrade has already affected the config and new pricing conditions are in place.
please explain your question clearly.

BAPI or FM to Simulate Pricing for Sales order

Hi,
We are replicating sales order processing using Webdynpro(Portal).In that we are done with sales order Create,Change,Display except pricing for new custom condition types.
The rquirement is whenever the user added new custom Condition Type along with the Condition amount for the line item the net value for the line item should be recalculated and should be dispalyed in the screen.
I have searched for any BAPI or Function Module to calculate the pricing in Simulation mode and return the Netvalue for the Sales order line item.But no luck.I need to know is there any BAPI or FM avaliable for the same?
Regards,
Vigneswaran S

Hi Namesh,
Thanks for the reply.I think you are not getting my point.We dont have any issues in SAP GUI.We are developing Sale order screen in Webdynpro and in that we have to handle the pricing part.Means that whatever operation user can do in pricing (like changing the condition amount and immediately net value will get upadted) in SAP GUI,has to be done using Webdynpro(portal) as well.To do changes in Pricing condition type and amount at webdynpro side,we have to simulate the pricing using BAPI inorder to recalculate the net value and display it on the webdynpro screen.Please tell me is ther any FM or BAPI to calculate the pricing.
Regards,
Vigneswaran S
Edited by: Vigneswaran S on May 14, 2008 11:44 PM

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Rajesh/Sadhu/RobertoUrgent :- Open Sale Order Value not getting Reduced?

Hi,
   Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
   What could be the reason ?
   Pls help.
Regrds,
Binayak
Message was edited by:
        Binayak Ghosh
Message was edited by:
        Binayak Ghosh

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

How to swap between to sets of item categories in sales order

Hi,
We receive Idocs from a different system that creates sales order in the R/3 system. For some of these, we want to be able to use an alternative sourcing mode - basically switch between standard POs and 3rd Party POs. The orders has many items, and we find it impractical to manually update all items - also because the order might contain different materials with maybe 5-10 different item categories, that needs to be changed to 5-10 others. This will be very difficult for our business users, since we do not have a simple naming convention of item categories to ease this.
So we are looking for alternative ways, where we can change all items by changing on header level.
We have thought of these alternatives :
1. Change distribution channel. Requires all materials and customers to be set up in 2 DCs - not realistically.
2. Change sales order types using VOV8 alternatives. This seems not to be allowed for materials in BOMs and with E consumption. See other thread named "Can not change SO order type - disallowed by item settings" for more details.
3. What we we really need is changes on schedule line level, and I suppose we could have a logic in MV45AFZZ change this dependent on some user field. But I don't think this will work, as other settings controlled by requirement class etc. will be inconsistent.
Proposals for this are welcome - it should be a common issue.

Hi,
We ended up designing a solution where item category was swapped by shipping condition. For shipping condition 11, we simulated that a specific 'usage' was active. It required a few tricks to get the Source determination to run, and a further trick to avoid a re-pricing B to nuke the pricing conditions. This is still draft code, but it seems to work :
Enhancement points ES_SAPFV45P / VBAP_FUELLEN_10 : Ensure usage is set according to shipping condition
data : ld_active type c.
data : ld_no_pricing_vwpos type c.
constants : lc_vwpos_no_pricing(20) type c value 'VWPOS_NO_PRICING'.
Fake change to ensure new item cat determination
( conditions when this is active, setting ld_active )
if sy-subrc is initial
and ld_active = 'X'            "Action enabled for company
and t180-trtyp ca 'HV'.       " Create/change mode
case vbak-vsbed.
when '11'. " Special logic
    t184_vwpos = 'Z001'. " Special T184 usage for direct
    clear *vbap-mandt. " simulate change of *vbap
    matnr_changed = 'X'." simulate change
    ld_no_pricing_vwpos = 'X'. " Flag for suppress B repricing
when '12'. " standard logic
    clear t184_vwpos. " Standard T184 usage for indirect
    clear *vbap-mandt. " simulate change of *vbap
    matnr_changed = 'X'." simulate change
    ld_no_pricing_vwpos = 'X'. " Flag for suppress B repricing
when others.
    clear ld_no_pricing_vwpos.
endcase.
Memory ID read in MV45AFZB, form USEREXIT_NEW_PRICING_VBAP
export ld_no_pricing_vwpos to memory id lc_vwpos_no_pricing.
endif.
MV45AFZB, form USEREXIT_SOURCE_DETERMINATION : Ensure item category determinations takes usage into consideration
( conditions when this is active, setting ld_active )
if sy-subrc is initial
and w_active = 'X'            "Action enabled for company
and t180-trtyp ca 'HV'.       " Create/change mode
Get higher-level item category
clear lv_uepos. clear gv_spp_pstyv.
lv_uepos = vbap-uepos.
do 10 times. " to eliminate phantom levels
read table xvbap with key posnr = lv_uepos.
if sy-subrc = 0 and xvbap-pstyv ne lv_zvco.
gv_spp_pstyv = xvbap-pstyv.
exit.
elseif sy-subrc eq 0 and xvbap-pstyv eq lv_zvco.
lv_uepos = xvbap-uepos.
elseif sy-subrc ne 0.
exit.
endif.
enddo.
t184_vwpos set in FV45PFAP_VBAP_FUELLEN
call function 'RV_VBAP_PSTYV_DETERMINE' "Determine using T184
         exporting
           t184_auart   = tvak-auart " Order type
           t184_mtpos   = maapv-mtpos "Item category group
           t184_uepst   = gv_spp_pstyv "Higher level-SPP item category
           t184_vwpos   = t184_vwpos " Usage from FV45PFAP_VBAP_FUELLEN
           vbap_pstyv_i = ''
         importing
           vbap_pstyv   = vbap-pstyv.
endif.
MV45AFZB, form USEREXIT_NEW_PRICING_VBAP : Ensure dynamic change of item categories does not trigger repricing type B.
data : ld_no_pricing_vwpos type c.
constants : lc_vwpos_no_pricing(20) type c value 'VWPOS_NO_PRICING'.
Memory ID set in FV45PFAP_VBAP_FUELLENP, FORM VBAP_FUELLEN
import ld_no_pricing_vwpos from memory id lc_vwpos_no_pricing.
if sy-subrc is initial
and ld_no_pricing_vwpos = 'X'.
Skip repricing when mass change item cat
clear new_pricing.
endif.
I hope someone will find it useful. Please notice that Enhancement points was required, so it will not work in older R/3 versions.

Simulate Sales Order

Similar Messages

Maybe you are looking for