Simultaneously successful and in-progress deploy

I deployed an app to two devices. Both PCs installed the application successfully, and the app is fully usable on the client side. However in deployment status I see the two PCs under the Success tab, but I also see the two PCs under the In Progress tab.
The message under the In Progress tab is "Waiting for user session reconnect". I have logged into both PCs and restarted them, force updated their machine policy and application deploy policy and the message persists.
Any ideas about how I can resolve this issue and prevent it from occurring in the future?

No errors that I can see.
<![LOG[+++ Starting Install enforcement for App DT "Bluebeam Revu x64 12 - Windows Installer (*.msi file)" ApplicationDeliveryType - ScopeId_94C5CC71-1DFD-46CD-9F9C-4B8A35F553C6/DeploymentType_b8f7e891-609e-42a4-aea6-ba746faa2b06, Revision - 2, ContentPath - C:\Windows\ccmcache\2, Execution Context - Any]LOG]!><time="15:40:01.680+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appprovider.cpp:1702">
<![LOG[ A user is logged on to the system.]LOG]!><time="15:40:01.682+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appprovider.cpp:2083">
<![LOG[ Performing detection of app deployment type Bluebeam Revu x64 12 - Windows Installer (*.msi file)(ScopeId_94C5CC71-1DFD-46CD-9F9C-4B8A35F553C6/DeploymentType_b8f7e891-609e-42a4-aea6-ba746faa2b06, revision 2) for system.]LOG]!><time="15:40:01.683+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appprovider.cpp:2148">
<![LOG[+++ MSI application not discovered [MSI Product Code: {81D4867E-366F-4F34-A1C2-DF819B7BCF00}, MSI Product version: ]]LOG]!><time="15:40:01.683+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="msihandler.cpp:131">
<![LOG[ App enforcement environment:
Context: Machine
Command line: msiexec /i "Bluebeam Revu x64 12.msi" /q
Allow user interaction: No
UI mode: 1
User token: null
Session Id: 4294967295
Content path: C:\Windows\ccmcache\2
Working directory: ]LOG]!><time="15:40:01.684+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcontext.cpp:85">
<![LOG[ Prepared working directory: C:\Windows\ccmcache\2]LOG]!><time="15:40:01.684+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcontext.cpp:189">
<![LOG[Found executable file msiexec with complete path C:\Windows\system32\msiexec.exe]LOG]!><time="15:40:01.685+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="executility.cpp:188">
<![LOG[ Prepared command line: "C:\Windows\system32\msiexec.exe" /i "Bluebeam Revu x64 12.msi" /q /qn]LOG]!><time="15:40:01.686+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcontext.cpp:338">
<![LOG[Valid MSI Package path = C:\Windows\ccmcache\2\Bluebeam Revu x64 12.msi]LOG]!><time="15:40:01.699+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcontext.cpp:765">
<![LOG[ Advertising MSI package [C:\Windows\ccmcache\2\Bluebeam Revu x64 12.msi] to the system.]LOG]!><time="15:40:01.700+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcommon.cpp:125">
<![LOG[ Executing Command line: "C:\Windows\system32\msiexec.exe" /i "Bluebeam Revu x64 12.msi" /q /qn with system context]LOG]!><time="15:40:03.112+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:201">
<![LOG[ Working directory C:\Windows\ccmcache\2]LOG]!><time="15:40:03.112+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:215">
<![LOG[ Post install behavior is BasedOnExitCode]LOG]!><time="15:40:03.114+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appcommon.cpp:1094">
<![LOG[ Waiting for process 4980 to finish. Timeout = 120 minutes.]LOG]!><time="15:40:03.115+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:1958">
<![LOG[ Process 4980 terminated with exitcode: 0]LOG]!><time="15:40:55.997+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:1967">
<![LOG[ Looking for exit code 0 in exit codes table...]LOG]!><time="15:40:55.997+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:505">
<![LOG[ Matched exit code 0 to a Success entry in exit codes table.]LOG]!><time="15:40:55.997+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appexcnlib.cpp:584">
<![LOG[ Performing detection of app deployment type Bluebeam Revu x64 12 - Windows Installer (*.msi file)(ScopeId_94C5CC71-1DFD-46CD-9F9C-4B8A35F553C6/DeploymentType_b8f7e891-609e-42a4-aea6-ba746faa2b06, revision 2) for system.]LOG]!><time="15:40:56.002+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appprovider.cpp:2148">
<![LOG[+++ Discovered MSI application [AppDT Id: ScopeId_94C5CC71-1DFD-46CD-9F9C-4B8A35F553C6/DeploymentType_b8f7e891-609e-42a4-aea6-ba746faa2b06, Revision: 2, MSI Product code: {81D4867E-366F-4F34-A1C2-DF819B7BCF00}, MSI Product version: ]]LOG]!><time="15:40:56.003+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="msihandler.cpp:127">
<![LOG[++++++ App enforcement completed (54 seconds) for App DT "Bluebeam Revu x64 12 - Windows Installer (*.msi file)" [ScopeId_94C5CC71-1DFD-46CD-9F9C-4B8A35F553C6/DeploymentType_b8f7e891-609e-42a4-aea6-ba746faa2b06], Revision: 2, User SID: ] ++++++]LOG]!><time="15:40:56.003+420" date="06-16-2014" component="AppEnforce" context="" type="1" thread="5224" file="appprovider.cpp:2448">

Similar Messages

Data Centre Interconnection - firewall and load balancer deployment

Hi all,
I've read lots of Cisco docs/white papers on DCI - Layer 2 extension between DCs, but as yet I cannot find any decent information on how best to deploy firewalls and load balancers in such a design. I've seen refs to FHRP isolation on Nexus 7k (and possible 6k if you use DCI block) but nothing on the services elements.
The services element seems to be a complete minefield here:
- active/standby across sites, or deploy resilient pairs in each site?
- how to align optimal traffic flows inbound and ooutbound (RHI, SNAT, etc.)
- best practice suggestions ideally.
Cisco DCI docs seem to always gloss over the fact that most customers would have to deal with firewalls and load balancers here, and simply refer to 'coming soon' for that info.
If anyone has any good suggestions/links to docs explaining detailed implementation info would be much appreciate
Thanks
Phil

You might want to check out this new product called ITD.
Simple and faster solution:
ITD provides :
ASIC based multi-terabit/s L3/L4 load-balancing at line-rate
No service module or external L3/L4 load-balancer needed. Every N7k port can be used as load-balancer.
Redirect line-rate traffic to any devices, for example web cache engines, Web Accelerator Engines (WAE), video-caches, etc.
Capability to create clusters of devices, for example, Firewalls, Intrusion Prevention System (IPS), or Web Application Firewall (WAF), Hadoop cluster
IP-stickiness
Resilient (like resilient ECMP)
VIP based L4 load-balancing
NAT (available for EFT/PoC). Allows non-DSR deployments.
Weighted load-balancing
Load-balances to large number of devices/servers
ACL along with redirection and load balancing simultaneously.
Bi-directional flow-coherency. Traffic from A-->B and B-->A goes to same node.
Order of magnitude OPEX savings : reduction in configuration, and ease of deployment
Order of magnitude CAPEX savings : Wiring, Power, Rackspace and Cost savings
The servers/appliances don’t have to be directly connected to N7k
Monitoring the health of servers/appliances.
N + M redundancy.
Automatic failure handling of servers/appliances.
VRF support, vPC support, VDC support
Supported on both Nexus 7000 and Nexus 7700 series.
Supports both IPv4 and IPv6
N5k / N6k support : coming soon
Blog
At a glance
ITD config guide
Email Query or feedback:[email protected]

UWL is not showing New and In Progress tasks

Dear All,
We are facing a strange concern where the UWL is displaying all the below work items.
Tasks forwarded to someone
Tasks for Resubmission
Completed Tasks
But not the New and In Progress tasks wherein the work items are already available in the user inbox.
The system details are SRM 7 with EHP 3 and the Netweaver portal is 7.30 SP 09
Please find the below screen shot for your reference.
And I would also like to update you that the below has already been tested.
1.) Check in SBWP - workflow inbox of the respective user wherein the work items are available already.
2.) In the SWI5 transaction code, the work items are in Ready status
3.) From Portal perspective, the webflow connector has been defined and it has got connected successfully.
4.) In the Webflow xml file, we are able to see the above highlighted task id which has already been defined.
With that, I am able to understand that if there is any action on the work item in SRM system, the same is getting replicated in UWL. Else it is not getting displayed in the UWL if there is no action been done on the work item.
Could you please check and advise if anyone has any other suggestions on the above. Thanks in advance for your help.
Best Regards,
Bharathi

Dear Bharathi
I hope you are well and many thanks for using the SAP Discussion Forums .
Ok now based upon your scenario and the points you have highlighted there are a few important points to be highlighted.
Firstly we need to remember the concept through which the UWL Service functions and operates.
Ok with the UWL the normal behaviour follows the notion of the UWL Interface taking "5 Minutes"
for the tasks to actually load into the UWL upon intitial logon.The UWL works using two Pull operations. Firstly tasks are pulled from the backend into the UWL cache and they are pulled a second
time from the cache into the UWL User Interface. Due to this architecture there is an inherent delay in the automatic refreshes of the UWL. There is no way, in the current architecture that the UWL can refresh instantaneously. This is upon inital load as the cache must be built first upon logon so there will always be a delay. Real time refresh in the latest versions, is only when you complete a task.
Now with reference to your scenario you mentioned the following:
Points of interest
Tasks forwarded to someone
Tasks for Resubmission
Completed Tasks
"But not the New and In Progress tasks wherein the work items are already available in the user inbox."
Now from your analysis perspective you mentioned examining the following:
Checked in SBWP - workflow inbox of the respective user wherein the work items are available already.
In the SWI5 transaction code, the work items are in Ready status
From Portal perspective, the webflow connector has been defined and it has got connected successfully.
In the Webflow xml file, we are able to see the above highlighted task id which has already been defined.
Ok what I would you to do here is review and carefully cross reference your current UWL Destination Service Configuration setup as the smallest discrepancy (if any) can cause unpredictable and unexpected behaviour.
- SAP Note: 1133821 - UWL Destination Service configuration
Check that after applying Note 1133821 the destination names and the UWL connector names exactly match, even considering case-sensitiveness. I mean if your portal system alias (=UWL connector name) is for example XYZCLNT100, then the rfc destination name should be exactly XYZCLNT100$WebFlowConnector. If that is not the case, please correct the rfc destination accordingly.
After you have checked/prepared the RFC destination for the future use please re-register that connector in the UWL config UI (Portal->System Administration->System Configuration->Universal Worklist) with which you would like to use this RFC destination.
Restart the UWL portal service as the followings: Portal -> System Administration -> Support -> Portal Runtime -> Application Console -> com.sap.netweaver.bc.uwl -> Show -> in thecom.sap.netweaver.bc.uwl.core.portal.UWLPortalService row press restart.
Re-create the connector in the config UI again and register the connector.
Clear the UWL cache
Additionally kindly review the documentation below to ensure the optimal parameters are maintained for workitems being brought into the UWL.
KBA number: 1577547 UWL Performance Tips and Considerations
Also, you may want to take a look at our sizing guide that our colleagues colleagues in development support have written in relation to the UWL. You will find this if you go to: You can find the document under this path: www.service.sap.com/sizing > sizing guidelines ' SAP NetWeaver > UWL Sizing guide
These are details that you need in order for the performance to be optimal in the Universal Worklist. Please check through the documentation to see if your parameters are set accordingly and also that you have followed the information in this document.
http://wiki.scn.sap.com/wiki/display/BPX/The+list+of+items+shown+here+could+be+outdated.+Waiting+for+update
SAP Note: 1886490 UWL does not show the most upto-date items after login
Kindly update me as per your findings.
I greatly appreciate your time and patience and I look forward to recieving your reply.
Troy Cronin - Enterprise Portal Support Enginerr

Simultaneous data and voice

so there is an article that states that verizon iPhone5 won't have simultaneous data and voice capability. I heard from Verizon that isn't true...has anyone heard differently?

In response to your claim that no other IPHONE could do this please note that the iPhone 3G, 3GS, 4, and 4S on AT&T all allow simultaneous voice and data over cellular network. I know, I have a 3GS on AT&T now. As for your claim that this won't cripple Verizon I'd suggest you compare market share between AT&T and Verizon on Apple and non-Apple smart phone products. The data is eye-opening. Verizon is dominant on the non-Apple platform but is far behind AT&T on iPhones. There's a clear user group who cares deeply about the ability to log into data services (like Go to Meeting and Webex) while on phone calls to facilitate collaboration on projects. The Verizon juggernaut for these folks has always been the inherent design limitation of CDMA. The deployment of LTE created the opportunity for Verizon to break through.
If simultaneous data and voice isn't important than why does LG, Samsung, and others make phones for Verizons network that have the extra antenna needed to make it work over LTE and why would so many in this iPhone 5 blog be writing posts about their dissapointment in this limitation?

HT1339 what if you click restore and the progress bar is interrupted and says that your ipod is busy? Then what?

what if you click restore and the progress bar is interrupted and says that your ipod is busy? Then what?

Reset the iPod - Press Menu and Select simultaneously for about 10 secs or till the Apple Logo comes ON.
Disconnect the iPod, and all other USB devices
connect the iPod to another USB Port, and not to a USB hub. (Never connect the iPod to the USB port on the Keyboard.)
Run Disk Utility -> First Aid->Erase (to correct any filesystem corruption.
Then run iTunes and Restore.

Simultaneously Play and Record.

Hi
I'm working on a application where I need simultaneously Play and Record.
I followed the code of 'SpeakHere'. I got some success also. It is playing and recording simultaneously, but the problem is it plays audio through headphone speaker while recording. I wanted it to play through external speaker.
thanks.

That is, literally, all the code I have behind my "Enable Speaker" button. Are you sure you've set the Audio Session's category beforehand, and enabled it?
I see you're using the SpeakHere sample code. It does take care of setting up the audio session and enabling it. But it uses the "Media Playback" category of the audio session, rather than the "Play and Record" category.
Look for all the places in SpeakHere where they set the audio session's category (for playback) and change it to the "Play and Record" category. The property I mentioned above only takes effect in this category.
Good luck! If you're still having trouble, a chunk of code or some NSLog output might be helpful.

PS: BAPI For Planned Progress and Actual Progress

Dear All,
Is there any BAPI available for Planned Progress and Actual Progress for PS Project.
Regards,
Sohail

Hi,
Try using this report s_alr_87013532.
Also for planned and actual progress the table is rpsqt. Could not find any bapi for the progress
Regards
Hiren K.Chitalia

I used Target mode to transfer files to a new iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and po

IS THE SITUATION HOPELESS
I used Target mode to transfer files to a new i7 iMac running Snow Leopard 10.6.8 from an older Dual core Intel machine (EMC 2105) also on 10.6.8. but originally Tiger 10.4. The operation was successful and I ejected the disk icon from the new machine and powered down the old machine. When this was restarted the next day there was a grey screen with flashing Mac symbol alternating with a 'no entry' sign and occasionally a question mark.Keyboard and mouse were unusable so k inserted the original instal disc (No.1 for 10.4. with installer 1.0.4) which came with the machine in 2006 in an attempt to boot from this. The ensuing window said this was not possible and now it cannot be ejected.I have tried everything ! It offers Disk Utility and other options like Terminal but that doesn't work either.I 'repaired disk' and that was pronounced o.k. None of the various keystrokes at start up will work, and the computer will only offer the installer disc continually.The only option would seem to be is to erase the hard drive completely from the disc in the machine.I don't want to do this as there is still material which I need to recover. I think the drive has in some way been corrupted by using it in target mode, and I don't know if there are any other options to try.
Please tell me how to get this disc to eject !

Graham Giles wrote:
Have you seen this type of problem before? I think it could be a serious issue for anyone in a similar position.
No; but then, I've not had occasion to use TDM. I've been using firerwire drives for over 10 years, both FW400 and FW800, with no issues except a bit of instability using a B&W G3 machine.
TDM should be safe. Using cautious, manual copying of files from the Target machine to the Host machine should not result in unexpected loss of files or damage to the Target drive's directories. It should behave exactly the same as if it were an external (to the Host) firewire drive.
• I don't suppose there is anything I can do to 'put back' lost items from a separate Time Machine drive which has an up to date backup on it.
There is probably a way to do that - seems to me that's one of the reasons for a Time Machine volume.
On the other hand, if the Time Machine volume is rigidly linked to the now-absent OS on the original drive, there may be no way to effectively access the files in the TM archive.
I know that using a cloned drive would work well in this instance.
I have no experience with Time Machine, so perhaps someone who has will chime in with suggestions.
With the machine in TDM with the other machine, have you tried running Disk Utility to see if you can effect repairs to the drive?

TS2570 On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "

On start up of my new iMac it locks on the grey screen with the apple logo and the progress wheel spins. Boot up in safe and this is where it stopped at "BootCacheControl: Unable to open /var/db/bootcache.playlist: 2 no such file or directory. "

Reinstalling MacOS does NOT fix the problem for me. I'm still searching a solution !
Bernard

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes

I have tried several times to install iTunes update 11.1.4 on my PC. I get a message saying that install was not successful and an error message of MSVCR80.dll not present, Error 7, (Windows error 126). I am told to reinstall iTunes, but nothing changes. What next? I've not had this problem with other updates requested by Apple.

I have also had the same problem with my Win 7 32 bit computer. I had great help from Apple techs in Montreal and Orlando for 2.5 hours. They helped me remove every trace of Apple products and clean the registry in two different ways. Each install gave the same problem! If Apple techs can't fix it (on some of our machines) then we are really in trouble. They promised to raise it with the "engineers" and get back to me with a solution. I am waiting and hoping. Otherwise maybe version 11.1.5 will have a fix ??

Flex and Zend amf deployment resolved with proper solution

Hi All,
Although, I personally do not like using Zend for these issues itself. However, I faced this issue first time with flex 4.0 version when everyone used to run into
channel disconnected error. you can find the link for that post here:
http://forums.adobe.com/message/3366991.
Now, with flash builder 4.6, things have changed slightly and so the deployment process. So, here are the right set of steps to be followed :
1. after developing your flash project, export the release build(I assume if you are a flex user, you should know these steps already)
2. Now, check your release folder, you must have got some files with amfconfig.ini and gateway.php and just one folder named history.
3. copy all these files into a new folder say "My Release Build".
4. Now, step 1 is get Zend framework in place, to achieve that:
there are different ways. some will say : "make sure zend must already installed on your production server." that is an alternative but most likely, the easier way to do this is : search your www(root folder on localhost),you will find a folder with name ZendFramework. Copy this folder to "My Release Build"
5. Now, the services that you have used in your flex project, go to debug folder of your project which should be in your www(root folder on localhost) with name "yourprojectname-debug". copy services folder from this debug folder to "My Release Build"
6. Now, open your amfconfig.ini from "My Release Build" and edit and make it look like following:
[zend]
webroot = http://www.yourwebsite.com
;you can edit above webroot to match the root folder of your website or use . to make it point to root.
zend_path = ./ZendFramework/library
[zendamf]
amf.production = true
amf.directories[]= services
thats it. your amf config is fine.
7. edit gateway.php:
Now, remove everything from gateway.php and copy this as it is there:
<?php
ini_set("display_errors", 1);
$dir = '.';
$webroot = $_SERVER['DOCUMENT_ROOT'];
$configfile = "amf_config.ini";
//default zend install directory
$zenddir = $webroot. '/ZendFramework/library';
//Load ini file and locate zend directory
if(file_exists($configfile)) {
    $arr=parse_ini_file($configfile,true);
    if(isset($arr['zend']['webroot'])){
        $webroot = $arr['zend']['webroot'];
        $zenddir = $webroot. '/ZendFramework/library';
    if(isset($arr['zend']['zend_path'])){
        $zenddir = $arr['zend']['zend_path'];
// Setup include path
    //add zend directory to include path
set_include_path(get_include_path().PATH_SEPARATOR.$zenddir);
// Initialize Zend Framework loader
require_once 'Zend/Loader/Autoloader.php';
Zend_Loader_Autoloader::getInstance();
// Load configuration
$default_config = new Zend_Config(array("production" => false), true);
$default_config->merge(new Zend_Config_Ini($configfile, 'zendamf'));
$default_config->setReadOnly();
$amf = $default_config->amf;
// Store configuration in the registry
Zend_Registry::set("amf-config", $amf);
// Initialize AMF Server
$server = new Zend_Amf_Server();
$server->setProduction($amf->production);
if(isset($amf->directories)) {
    $dirs = $amf->directories->toArray();
    foreach($dirs as $dir) {
        // get the first character of the path.
        // If it does not start with slash then it implies that the path is relative to webroot. Else it will be treated as absolute path
        $length = strlen($dir);
        $firstChar = $dir;
        if($length >= 1)
            $firstChar = $dir[0];
        if($firstChar != "/"){
            // if the directory is ./ path then we add the webroot only.
            if($dir == "./"){
                $server->addDirectory($webroot);
            }else{
                $tempPath = $webroot . "/" . $dir;
                $server->addDirectory($tempPath);
        }else{
               $server->addDirectory($dir);
// Initialize introspector for non-production
if(!$amf->production) {
    $server->setClass('Zend_Amf_Adobe_Introspector', '', array("config" => $default_config, "server" => $server));
    $server->setClass('Zend_Amf_Adobe_DbInspector', '', array("config" => $default_config, "server" => $server));
// Handle request
echo $server->handle();
Now, upload your "My Release Build folder to your production server webroot"
case 1: if you get "channel disconnected error, you have made some mistake and your path for zend or services folder is not right."
In above case, "ZendFramework folder and services folder with all of other release files". To find out what is wrong, open this url :
http://www.yourwebsite.com/gateway.php. if you see this lovely string there : "Zend Amf Endpoint". consider your are through with zend settings on server
otherwse you will see relative errors.
2. After fixing this step, try run your website, you will land into this error :
Class “yourcorrectclassname” does not exist: Plugin by name ‘Classname’ was not found in the registry; used paths:
: /home1/messoftc/public_html/oc/services/
#0 /home1/messoftc/public_html/ZendFramework/library/Zend/Amf/Server.php(553): Zend_Amf_Server->_dispatch(‘fxnname’, Array, ‘classname’)
#1 /home1/messoftc/public_html/ZendFramework/library/Zend/Amf/Server.php(629): Zend_Amf_Server->_handle(Object(Zend_Amf_Request_Http))
#2 /home1/messoftc/public_html/oc/gateway.php(69): Zend_Amf_Server->handle()
#3 {main}
Now, this is a zend framework bug, it does not automatically detect the php classes in your services folder,those who have run into this, must have googled hard to find the solution and this bug is also logged officially on zend server jira log.
so, what is the solution? simple and effective. open your gateway.php file from "My Release Build"
Add this little line :
$server->addDirectory(dirname(__FILE__) . '/services/');
after this line :
$server->setProduction($amf->production);
reupload this file to your production, you should see your Flex, Zend, php & Mysql in action.
Here is a sample link I have created :
http://www.eiws.co.in/testzend.html
you may also visit the endpoint file:
http://eiws.co.in/gateway.php
If anyone still faces this issue, can contact me at [email protected].
Credits: "To all developers who share their knowledge with everyone and google and thousands of blogs who provide a medium to share this knowledge"

Richard Bates of flexandair.com figured it out. In my php.ini file, I had the memory limit set at 8M. After, changing it to 32M, it worked. Thank you, Richard!
-Laxmidi

FaceTime not working on my Macbook Pro. I am able to sign in successfully and add contacts. When I try to call a contact with an iPhone, its connecting then fails. When someone try to FaceTime me,I try to access but it says connecting then fail

FaceTime not working on my Macbook Pro. I am able to sign in successfully and add contacts. When I try to call a contact with an iPhone, it says connecting then fails by ending automatically. When someone try to FaceTime me,I accept but it says connecting then fail. I only have a MacBook Pro to FaceTime and not an iPhone. I was informed that I should be able to FaceTime from my laptop via video call without an iPhone.
Please advise.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
1. The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
2. Connect to a different network, such as a public Wi-Fi hotspot, and try again.

Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?

Imported analog video successfully and it is normal in the "Event" pane but when I move a clip into the "Project" pane, it enlarges it slightly and distorts it. How can I keep that from happening?

Hi
Turn off analyze/image stabilization.
Yours Bengt W

After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and a progress bar under it. What should i do?

After updating to iOS 5.0.1 my iphone 4 is frozen on the screen with the apple logo and the progress bar under it. Held the power and home button, the phone shut off, and restarted the progress. If i try to turn the phone on, it keeps telling me to connect to iTunes. Once I do, it asks me to restore, i click restore, but it keeps on freezing at the screen. What is the problem? Error 1603 comes up. Followed the link to apple's page but nothing that was said there worked.

See Here for
Unable to Update or Restore
http://support.apple.com/kb/HT1808

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought the firewall problem without success and even temporarily turned off firewall with no success.

I have just installed Lion OS and Face Time encounters server problems on sign up. I have sought to rectify the firewall problem without success and even temporarily turned off firewall with no success. Any ideas?

Some folks have discovered that changing their DNS service fixes FaceTime connection issues.
The ideal way is to configure your modem/router with DNS service, but often settings in System Preferences/Network/Advanced/DNS on your Mac will override the router settings. Try either of these;
OpenDNS
208.67.222.222, 208.67.220.220
Google Public DNS
8.8.8.8, 8.8.4.4

Simultaneously successful and in-progress deploy

Similar Messages

Maybe you are looking for