Since I have upgrade from Firefox 3 to 4 and then 5 I know longer get the Padlock or Keylock Icon indicating the needed a secure session when logging on to sites such as my bank account, what is the problem?

The padlock or key Icon that indicates a secure session no longer appears when I sign into a site such as my bank or any site requiring security for financial or other transaction. Since this security is no longer available in the Firefox browser, I use Internet Explorer for SECURE Browser functions.

We had the exact same issue happen to us. No issue on Windows XP but Windows 7 mapped two home drives (F and Z). F was mapped during the login script and Z was being mapped by some unknown reason.
We use Netapp for our storage and home drives and use a feature called CIFS Home Drive Mapping. This essentially maps a user to a folder not available through normal CIFS methods causing AD to error when setting the home drive. To get around this we use
dsquery and dsmod to modify this attribute in the user account. This is the command we used...
dsquery user -name %UserNameX% | dsmod user -hmdrv F -hmdir \\filer\$username$
Notice there is no ":" after the F
We determined the root causewas the value for the
homeDrive attributefor the user account was set to "F" instead of "F:"
When we updated our users to reference "F:" instead of "F" in their user, this problem was resolved.
Use LDP or some other method to verify that the homeDrive attribute is set to "F:" (or any other letter) or you will have this issue.

Similar Messages

Since I have upgraded from 7.1 then the power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours

Since I have upgraded from 7.1 then the power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours before I need to recharge the battery.

Wrote a little wrong the first time!
Then I upgraded to 7.1 so have power consumption increased slightly unbelievable. I have new batteries in my iphone 5 and when I had at ios 7 so was consumption that allows the battery envelope in two days and with ios 7.1 so is it only 12 hours before I need to recharge the battery.

I have upgraded from 7 to 11 photoshop and am trying to organize photo in calendar format. How?

I have upgraded from photoshop 7 to 11 and am trying to format the photos in calendar format as I did in the 7 version and can not figure out how. ?

A lot of things changed with Elements 11, including the available display views. There is no longer a calendar view like in Elements 10 and before. The closest available is to go to the Events page (click Events in the top bar), and then switch from Events to Smart Events (just below the top bar). This will group all of your images into the day on which they were shot. However, it doesn't separated them on a calendar and leave you the blank spaces where no images were taken.

Exchange 2013 EAC shows "error Sorry, your request couldn't be completed. Try deleting the cookies from your browser, and then sign in again. If the problem continues, contact your helpdesk."

Hi,
My Exchange 2013 Hybrid environment is at CU5 level. Multiple administrators have started experiencing the error message
"error
Sorry, your request couldn't be completed. Try deleting the cookies from your browser, and then sign in again. If the problem continues, contact your helpdesk."
It only started two weeks ago and did not coincide with any infrastructure changes. The message occurs when clicking anything on the EAC GUI and it eventually allows you to perform the operation but only after the message
pops up a few times.
I have tried clearing the browser cookies, history, etc. Note that using the Office 365 EAC does not yield the same messages and it only happens in IE (IE 11).
Thanks.

Hi,
From your description, please make sure that the "Require SSL" is checked in IIS Manager -> Sites -> Exchange Back End -> ECP -> SSL Settings.
What's more, ensure that EAC site is added to the “Compatibility Mode”.
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

HT5639 unable to pair my iphone 4s to my mac using bluetooth been to apple store who have told me there is a clitch and to wait for undates to cure the problem ?

unable to pair my iphone 4s to my mac using bluetooth been to apple store who have told me there is a clitch and to wait for undates to cure the problem ?

I have my iPhone 4S paired with my macbook retina, so hexonxonx's reply is incorrect.
After you pair your phone and your computer, go into network preferences on your computer. Click the bluetooth pan, check that you see your phone and click connect.
That worked for me.
If I click connect from the phone it tells me that my retina mbp isn't compatible and it forces me to forget this device. If this happens just repair it...
Good luck

I can not open iPhoto. this is the messageShut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command ki get.

Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your photo library from a backup.

Before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. With information, s/he may be able to get your issue resolved sooner.

I cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Comma

i cannot open iphoto- the message I am getting says Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command-
I tries and it doesnt work!!

What version of iPhoto? Assuming 09 or later:
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

Please are you able to help. I have upgraded from Windows XP to 7 and am no longer able to email pho

I have upgraded from Windows XP to Windows 7 and am no longer able to email photographs from Elements 10. I need a verification code and have requested this several times. I have looked in the spam but nothing has arrived.Thanks you.

The software on the CD will not run on a Mac.
You may be able to navigate through the CD and pull out the image files, however.

I have an old photoshop album starter edition and it used how do I get the files on it

I have an old photoshop album starter edition and it used to work fine with the unlock key – now it just shuts down when the code is entered. Is there something else I can do or is there another program that will let me capture the photos that are in the files of the starter edition?

Photoshop Album Starter Edition support withdrawal FAQ

Imac freezes since mountain lion upgrade, i set to never sleep and then it is ok. any ideas what is going on?

This may be the same issue as some other discussions but I have a few different circumstances. I upgraded to Mountain Lion a few weeks ago and all seemed to be ok. Then I got an upgrade notice for Itunes last week and installed the update. Since then My mac started freezing after coming out of sleep mode. The mouse was active but when i selected programs from the dock the icons would just bounce and nothing would open.The only way to revive it was to do a restart with the power button. Then the system would be fine until it went into sleep mode .After reading through several disussions it seems many people are having similar issues with very few fixes to the problem. I am not very savvy on mac O/S so I am in the dark as to where to begin to troubleshoot this problem. Since the freeze ups always occur after coming out of sleep mode I set my computer to never sleep which has worked to stop the freezing but I am not sure how good it is for my system to be running all the time. I would appreciate any input on this problem. My Imac is a 2008 intel with 3 gig ram

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

We need to upgrade from Leopard to Snow Leopard and then on up the chain. How?

We have an old MacBook running Leopard (10.5.8). Can we upgrade to Snow Leopard and then add others gradually untill we get to the newest version? If so, were can we find a copy of Snow Leopard?

Before embarking on a major OS upgrade, it would be wise, advisable and very prudent if you backup your current system to an external connected and Mac formatted Flash drive OR externally connected USB, Thunderbolt or FireWire 800, Mac formatted hard drive. Then, use either OS X Time Machine app to backup your entire system to the external drive OR purchase, install and use a data cloning app, like CarbonCopyCloner or SuperDuper, to make an exact and bootable copy (clone) of your entire Mac's internal hard drive. This step is really needed in case something goes wrong with the install of the new OS or you simply do not like the new OS, you have a very easy way/procedure to return your Mac to its former working state.
Then, determine if your Mac meets ALL minimum system install requirements.
To install Yosemite, you need one of these Macs:
iMac (Mid-2007 or later)
MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
MacBook Pro (13-inch, Mid-2009 or later),
MacBook Pro (15-inch or 17-inch, Mid/Late 2007 or later)
MacBook Air (Late 2008 or later)
Mac mini (Early 2009 or later)
Mac Pro (Early 2008 or later)
Xserve (Early 2009)
Your Mac also needs:
OS X Mavericks, Mountain Lion, Lion, or Snow Leopard v10.6.8 already installed
2 GB or more of memory (I strongly advise, at least, 4 GBs of RAM or more)
8 GB or more of available space
Next,
If you run any older Mac software from the earlier PowerPC Macs, then none of this software will work with the newer OS X versions (10.7 and onward). OS X Snow Leopard had a magical and invisible PowerPC emulation application, called Rosetta, that worked seamlessly in the background that still allowed older PowerPC coded software to still operate in a Intel CPU Mac.
The use of Rosetta ended with OS X Snow Leopard as the Rosetta application was licensed to Apple, from a software company called Transitive, which got bought out, I believe, by IBM and Appe could no longer secure their rights to continue to use Rosetta in later versions of OS X.
So, you would need to check to see if you have software on your Mac that maybe older than, say, 2006 or older.
Also, check for app compatibilty here.
http://roaringapps.com/
If you have any commercial antivirus installed and/or hard drive cleaning apps installed on your Mac, like MacKeeper, CleanMyMac, TuneUpMyMac, MacCleanse, etc. now would be a good time to completely uninstall this apps by doing a Google search to learn how to properly uninstall these types of apps.
These types of apps will only cause your Mac issues later after the install of the new OS X version and you will have to completely uninstall these types of apps later.
Once you have determined all of this, you should be able to find the latest version of OS X Yosemite by clicking on the Mac App Store icon in the OS X Dock and then login to the Mac App Store using your Apple ID and password.
You can then begin the download and installation process of installing OS X 10.10 Yosemite from the Mac App Store.
Good Luck!

Upgraded from Aperture 2 to 3 and now photos are no longer in photo book

Hi,
I've recently upgraded my copy of Aperture from version 2 to 3 and after my library had updated everything seemed fine until I looked at a photo book I was working on. It appears that all of the photos that I had placed in the book are no longer there, and I am now left with a blank template.
The album I built up of photos to include is still there, they just aren't arranged on the pages of the book. Has anyone else experienced this, and if they have are there any suggestions for a solution?
Thanks in advance,
Mark

Hi,
I've recently upgraded my copy of Aperture from version 2 to 3 and after my library had updated everything seemed fine until I looked at a photo book I was working on. It appears that all of the photos that I had placed in the book are no longer there, and I am now left with a blank template.
The album I built up of photos to include is still there, they just aren't arranged on the pages of the book. Has anyone else experienced this, and if they have are there any suggestions for a solution?
Thanks in advance,
Mark

Can I upgrade from Lightroom 3 to 5 and then move a catalogue into it from Elements 10?

I currently have Lightroom 3, Elements 10, and just bought CS6.
Is it possible / advisable to upgrade to Lightroom 5 and then move the catalogue from Elements into Lightroom? it would consolidate photos in one catalogue, at a minimum...
any help appreciated.

Yes it can be done and is advisable!! Upgrade your Lr3 catalog in Lr5. I would then creat a new catalog in Lr5 and import the Elements one, then Open your original Lr5 catalog and import the one with the elements images. Just to keep the importing from elements separate.

Iphoto shuts down immediately upon opening. It goes to the last picture that I was viewing and then errors out. I get the message that "iPhoto quit unexpectedly" and then get to Ignore, Report, or Reopen. Nothing has been successful.

What can I do to correct the problem with iPhoto closing immediately without loosing my photos?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Shut down and restart your computer, and then open iPhoto again. If the problem persists, try rebuilding your photo library. To do this, quit iPhoto, and then reopen it while keeping the Option and Command keys pressed. You can also try restoring your pho

Well I have been at this for 3 days trying to get Iphoto to load. I have uninstalled, installed over and over again the ILife. Today I even downloaded Iphoto for 15 dollars from the App Store. I am running version 10.7.2 on my IMAC. Please please please can someone help get my Iphoto up and running. Thanks!

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Since I have upgrade from Firefox 3 to 4 and then 5 I know longer get the Padlock or Keylock Icon indicating the needed a secure session when logging on to sites such as my bank account, what is the problem?

Similar Messages

Maybe you are looking for