Since updating to Yosemite and CS6 2 of my print options are greyed out on my epson R2880 print pane?

My colour and colour settings options are 'greyed out' on my  Epson printer pane since updating to Yosemite and CS6,this happened before after running a software update on the printer driver! The driver version at that time was 6.62 and now it has updated to version 9.00....could this be the problem??

That's strange ... did you try restarting before printer install? You also may need to delete the printer itself (System Preferences > Printers & Scanners) and add it again , in order to access the proper drivers (?)
Can you show screen shot(s) of your incomplete print dialog?

Similar Messages

  • CS6 Encore launches but all options are greyed out

    The headline says it all. I'm using CS6 on a MacBook Pro, OS 10.7. Previously Encore has worked well. After the most recent update, Encore will launch but all of the options are greyed out. I can't start a new project, etc. When I try to open a previous Encore project, I receive an error message that some needed software is missing. Any ideas to help me solve the problem? With many thanks.
    Christopher B

    I suspect that same sort of issues that one gets when the activation is messed up. I think the resolution is deactivate and reactivate.
    Are you missing any presets in Premiere? I would look at some of the issues in the Premiere forum to further diagnose the problem and look for the recommended fix.

  • Iphone fingerprint options are greyed out and won't enable!!

    I Have had my iPhone 5s since feb and never had an issue, but just yesterday the finger print scanner stopped working... Went back in to enable and the options are greyed out.. When I click them to enable them it just says failed. Have restored and turned off loads!! Help!!!!

    Try a reset, hold down the home/sleep button together until you see the apple logo and then release then wait for the phone to boot back up.
    iPhone 5s: Using Touch ID
    You still have a 4 digit passcode turn on right?

  • When I try and print a web page in the print screen ALL the Print Frame options are greyed out. It won't let me print a page as I see it. I need to pring a page as is. How do I do it in the new 8.0??

    I go to print and try to select the radio button to print all frames, but It's not working

    The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
    Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
    As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page.

  • I want to print. 'selection' and' print frames' are greyed out.

    I want to print info on a page. 'selection' & 'print frames' are greyed out.
    == This happened ==
    Every time Firefox opened
    == forever

    Hi,
    My dad told me he had this 'no selection' problem when he wanted to print out a selection in Hotmail, so I had a hunt around, but didn't find a definitive solution.
    So, I have done some playing around, and have come up with this solution which works if you want to print out a selection in Hotmail (using firefox), but it is now greyed out.
    It seems to be connected with the way that Hotmail handles frames.
    (Thought I would post it as posts like this have helped me a ton in the past :0))
    '''To print a selection in hotmail you need to do this.'''
    1/ On the email you want to print click the small Printer icon in the hotmail menu.
    There is no need to highlight a selection at this stage because the email is in a frame, so it will do no good anyway.
    2/ A new page will open up and the printer dialog box will open up.
    Close the printer dialog box.
    3/ Highlight the text selection that you want to print on that page.
    4/ Press Ctrl-P on the keyboard.
    5/ The printer dialog box will now pop up again and you will be able to choose 'Selection'
    Your selection will now print.

  • I was able to print from adobe digital editions up to two days ago and now I do not have the option to print.  The "Print" option is greyed out.  Please help.

    I was able to print from adobe digital editions up to two days ago and now I do not have the option to print.  The "Print" option is greyed out.  Please help.

    Printing Expiry option might be set by the Publisher at server level. Right click on the book and select Item Info to know about the book permission.

  • Save and Save As options are greyed out

    I have an install of Adobe X Standard. An external source is sending in PDFs which are marked as Secured. However, according to the creator of these documents, only editing has been locked down, not Save or Save As functionality. When I open the document, all Edit functionality, as well as Save and Save As are greyed out.
    This is a new install of Adobe X. These documents could previously be saved using the same version of Adobe, but that machine needed to be re-installed due to OS instability. After re-installing Windows 7, then Adobe X, then updating to 10.1.13, these functions are now missing. I have no idea as to why. Does anyone know what might be causing this? Again, I've verified with the original creating that Save functionality shouldn't be disabled.

    There is no security setting that locks out save/save as.
    Save is greyed out when a file has not yet been changed, so that is normal. Save AS should not be greyed out at all. Don't know why that should happen.

  • All iWeb options are greyed-out, and can't make a new sites or pages.

    Hello,
    I am having a very annoying problem with iWeb. Every option is greyed-out! I can't make a new page or site, and it quits as soon as I close the iWeb window. It is version 1.1.2 I have tried installing useless updates for iWeb that did nothing, and I've tried to open iWeb from iPhoto by clicking the iWeb button, which also did nothing. I'm just about to give up on it.
    Can anybody please point me in the right direction or have a fix for this? All help will be appreciated!

    Hi ineedagoodalias,
    The answer to your problem isn't necessarily the simplest, but I'm 99% sure that it will work for you.
    You need to delete and reinstall iWeb. Not hard to do; you just need your installation DVD's that came with your machine.
    Drag the iWeb.app from your Applications folder to the trash. Spotlight for other elements of iWeb, and trash those as well. Empty the trash and restart your machine.
    On your recovery disks, as you move through the prompts, look for "Install bundled software". Customize the install to include only iWeb. After reinstalling iWeb you will be back to 1.0.1.
    Update the app to 1.1.1 directly from this link:
    http://www.apple.com/support/downloads/iweb111.html
    This will get you going, and you can update to 1.1.2 when you are sure everything is working properly. For other FAQ on iWeb, please see this link:
    http://web.mac.com/varkgirl/iWeb/iWebFAQ
    Be sure to let us know how it goes.
    Mark

  • All Update options are greyed out in RH11

    Hi.  I just reinstalled TCS5/RH11 to get rid of a missing .xpj file issue.  Then I imported an FM book and created a glossary in RH11.  I then edited my FM book and came back to my RH11 and tried to update the project with the changes in my FM book.  All options of Update are greyed out so basically, I cannot update my RH11 project.  Can someone hear me wail?

    For some reason, the Link > Framemaker document option was also greyed out when I created the project.  I had been having trouble with the .xpj file not being created by RH11 and reinstalled TCS5/RH11.  Then I created the project and was able to find and open the .xpj file.  Like I said, I found then that the  Link > Framemaker document option was greyed out and could only import the FM book.
    I recreated another project and see that the Link >   Framemaker document option is greyed out.  I can only use Link > Word document, which is of no use to me.  Any suggestions would be welcome!

  • Some options are greyed out in Captivate 8.0.1 and my bullets do not work?

    Hi, I am using Captivate 8.0.1 and am having trouble with 2 things:
    1. The bullets and indents that I have formated for my responsive project appear very messed up and not as I have formatted when I view my project in Edge Inspect?
    2. Some options in the TOC are greyed out (that I really need for my project). These option are to upload an icon and to align the position of the TOC (It wont let me align to the side of my project as the only option available is for 'overlay'.
    Any ideas on how to fix these problems would be much appreciated.
    Thanks!

    Hi there
    Captivate 8 introduced the first "Responsive" type of project. And in these types of projects, certain things simply won't work in the output. Henceforth, their options will often be disabled (or "grayed out"). The TOC appears to be one such item. The only option is to use an overlay TOC. I would suspect that this is because of "responsive design". Since the output will be adapting to differing screen sizes, I'm guessing that adding an additional 250 or so pixels for a TOC could prove troublesome and would likely throw off all the other design elements.
    Where exactly are you finding you are not capable of uploading an icon? I see that I'm able to upload icons that represent the collapse and expand gizmos, but you may be in a different spot.
    Cheers... Rick

  • When I want to organise my bookmarks most of the options are greyed out and cannot be used including create new folder! Help

    '''''''''bold text'''''''''
    When i want to organise my bookmarks most of the options on the organise bookmarks menu are greyed out and cannot be used - including create new folder etc. Help please.

    Make sure you are not in the Private Browsing Mode:
    File > Private Browsing is UNCHECKED.

  • IWeb window won't load - and all menu options are greyed-out

    I've used iWeb before (with a web site set-up), but I tried to open it today and the iweb screen would not open. The program menubar loads, but almost everything,including New Page and New Site are greyed out.
    I checked my ME account and it is active and working.
    Not sure what the problem is here - any ideas?

    Hi, I had the same problem!
    After one evening of pulling my hair out, I tried the following:
    1. Located the 'domain' file (or package). In my case at /*user/Library/Application Support/iWeb.
    2. moved the domain file to the desktop (or somewhere else)
    3. Started iWeb. I got the warning that iWeb needed a domain file in order to operate, and I confirmed that I wanted the program to create a new one for me.
    4. iWeb started as normal, but with no contents. I closed iWeb.
    5. I ctrl-clicked the original domain file on my desktop, and selected 'show package contents'.
    6. I ctrl-clicked the new, empty domain file in the Application Support/iWeb directory, and selected 'show package contents'.
    7. I deleted everything in the new, empty domain package file.
    8. And finally copied the contents from the old (seemingly corrupt) package file into the new one.
    9. Hooooray! iWeb started with the old contents intact!

  • Calendar and contact options are greyed out

    Hi all,
    I wand to sync my contacts and calendar between my iPad1 and my Windows Laptop.
    After installing the icloud sync software, I was only able to check "favourites and photostream" to be synced. The fields mail, calendar and contacts are greyed out and not available to select.
    I have browsed through the Internet, de-installed that software piece and installed it again, not change.
    Passwaords have been corrected according to the iTune needs (8characters, and so on).
    I do not know what to do, any ideas?
    Thanks

    When you say you are trying to get a file from your local c:drive, dio you mean that you are trying to import a file into your site from elsewhere on your computer, rather than 'getting' it from your remote server.  If you are trying to import a file from your local c:drive don't use the 'get' or 'put' buttons because they are just for remote connections, instead just use windows explorer to locate the file then either copy or cut and paste the file into the folder for your site.
    Richard

  • Get and Put options are greyed out in DW CS4

    I am a fairly green Dreamweaver user, and recently (finally) upgraded from MX4 to CS4.  I am trying to get a file from my local c:drive and both the get and put functions are greyed out.  Any idea how to enable these functions?  I do not have the file that I wish to transfer open.

    When you say you are trying to get a file from your local c:drive, dio you mean that you are trying to import a file into your site from elsewhere on your computer, rather than 'getting' it from your remote server.  If you are trying to import a file from your local c:drive don't use the 'get' or 'put' buttons because they are just for remote connections, instead just use windows explorer to locate the file then either copy or cut and paste the file into the folder for your site.
    Richard

  • I have a brother laser hl 1110 printer. the double side page printing option is greyed out and unusable. anyone know a fix for this? thanks. it prints single side okay.

    basically the question is the same as the title of the discussion. double sided printing option is grey and unselectable. i can't figure out if it can be changed to on in the presets etc. would appreciate any help. i am using maverick and the brother hl 1110 laser printer.

    Hello! I have the same exact problem and tried your suggestion. I can't find a duplex setting

Maybe you are looking for