Since upgrade from 22 to 23, FF says all my addons are disabled, but they (all) seem to function, so in fact they are 'enabled' .

I cannot 'officially' enable any of them. I also notice that none of the addons in the list ( using All-in-One Sidebar) show their own icon, they all have the green puzzle -icon. I run Mac 10.6.8. What can I do to resolve this problem ? I already tried restarts of FF and my I-Mac, but it keeps on telling me every addons is disabled.

I reinstalled All-in-One-Sidebar and the problem is solved. Thanks !

Similar Messages

Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs.

Since upgrading from Windows Vista to Windows 7 both Internet Explorer and Firefox will not recognize the numbers keys of my keyboard. I get numbers in Word and every other situation, just not in the internet programs. I have tried uninstalling Firefox and reinstalling with no results.

If there are problems with importing the IE Favorites in Firefox then export the favorites in IE to an HTML file and import that file in the Firefox Bookmarks Manager.
If you do not have the menu bar in IE then right-click the toolbar at the top to enable the Menu Bar.
*Export the favorites in IE to an HTML file (bookmarks.html):<br>File > Import and Export
*Import the HTML file in Firefox:<br>Bookmarks > Show All Bookmarks > Import & Backup > Import Bookmarks from HTML
See "Import from another browser" and "Import from file":
*http://kb.mozillazine.org/Import_bookmarks

Sound broken since upgrade from 2.6.29

I wasn't sure if I should post this here or in the multimedia forum. Anyway...
I have an Echo Audio Mia-midi soundcard and sound hasn't been working properly for me since upgrading from 2.6.29. Both 2.6.30 and 2.6.31 share the same issue and reverting to 2.6.29 always solves the problem. It seems some driver infrastructure has changed, because the two "Line out" level meters are not available in alsamixer anymore. Instead I have VU-meters for front, rear, center, woofer and side. These can't be set however, and seem to have no impact on the output (they are sometimes set to 100% and sometimes to 0%, but output is silent in both cases).
Running echomixer (an Echo Audio specific mixer in alsa-tools) and playing sound shows that there is sound playing at full volume at the subdevice channels, but the "final" output is silent, even though all output channels are set at their proper values, including the output mixer. Raising the monitor mixer, effectively forwarding the input channels to the output works as it should, so as far as I can tell, the issue concerns the software/driver output to the soundcard.
I've tried everything I can think of to solve this, but nothing seems to help. I've run an alsa debug script in both 2.6.29 and 2.6.31, but the only difference worth noting that I can find is connected to the line out level meters. In 2.6.29:
Simple mixer control 'Line',0
Capabilities: pvolume
Playback channels: Front Left - Front Right - Rear Left - Rear Right
Limits: Playback -128 - 6
Mono:
Front Left: Playback 0 [96%] [0.00dB]
Front Right: Playback 0 [96%] [0.00dB]
Rear Left: Playback 0 [96%] [0.00dB]
Rear Right: Playback 0 [96%] [0.00dB]
state.Mia {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 4
comment.range '-128 - 6'
comment.dbmin -12800
comment.dbmax 600
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
value.2 0
value.3 0
Both of these parts are missing from the output in 2.6.31.
I don't know what to do next. Any help would be greatly appreciated.

I wasn't sure if I should post this here or in the multimedia forum. Anyway...
I have an Echo Audio Mia-midi soundcard and sound hasn't been working properly for me since upgrading from 2.6.29. Both 2.6.30 and 2.6.31 share the same issue and reverting to 2.6.29 always solves the problem. It seems some driver infrastructure has changed, because the two "Line out" level meters are not available in alsamixer anymore. Instead I have VU-meters for front, rear, center, woofer and side. These can't be set however, and seem to have no impact on the output (they are sometimes set to 100% and sometimes to 0%, but output is silent in both cases).
Running echomixer (an Echo Audio specific mixer in alsa-tools) and playing sound shows that there is sound playing at full volume at the subdevice channels, but the "final" output is silent, even though all output channels are set at their proper values, including the output mixer. Raising the monitor mixer, effectively forwarding the input channels to the output works as it should, so as far as I can tell, the issue concerns the software/driver output to the soundcard.
I've tried everything I can think of to solve this, but nothing seems to help. I've run an alsa debug script in both 2.6.29 and 2.6.31, but the only difference worth noting that I can find is connected to the line out level meters. In 2.6.29:
Simple mixer control 'Line',0
Capabilities: pvolume
Playback channels: Front Left - Front Right - Rear Left - Rear Right
Limits: Playback -128 - 6
Mono:
Front Left: Playback 0 [96%] [0.00dB]
Front Right: Playback 0 [96%] [0.00dB]
Rear Left: Playback 0 [96%] [0.00dB]
Rear Right: Playback 0 [96%] [0.00dB]
state.Mia {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 4
comment.range '-128 - 6'
comment.dbmin -12800
comment.dbmax 600
iface MIXER
name 'Line Playback Volume'
value.0 0
value.1 0
value.2 0
value.3 0
Both of these parts are missing from the output in 2.6.31.
I don't know what to do next. Any help would be greatly appreciated.

Upgrade from win 8.1 pro to win 8.1 enterprise without loosing all settings & programs

I would like to upgrade from win 8.1 pro to win 8.1 enterprise without loosing all my current settings and programs...
Is there a way?
Many thanks
Sepp
Thanks Sepp

Hi,
I think this design by default, you can refer to the link below for the statements:
Windows 8 and Windows 8.1 Upgrade Paths:
http://technet.microsoft.com/en-us/library/jj203353.aspx
Roger Lu
TechNet Community Support

Since upgrading from Mavericks to Yosemite Mail, Spotlight,Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

Since upgrading from Mavericks to Yosemite Mail, Spotlight, Mission Control and App-Store don´t work correctly. Is it possible to return to Mavericks?

If you have an external drive with an OS X Time Machine backup, then do restore of your last backup. If you have an external drive with a bootable clone of your previous system, you can boot to that clone and re-clone the OS X on your external drive back to your Mac's internal drive.
If you do not have either of these available, then the reverting/restoring process becomes much more complicated and involves purchasing an external drive and backing up your current system to that drive, then erasing, reformatting your hard drive and now your only options to installng an OS X version is doing a clean install of OS X 10.6 Snow Leopard, then upgrading, again, to either OS X 10.7 Lion or 10.8 Mountain Lion. OS X 10.9 Mavericks is no longer available for download and Apple has not made OS X 10.9 Mavericks available in any other form to be able to redownload and install.
Maybe it would be better to explain in detail your issues with Yosemite to see if any of us here can help you with your difficulties.
I am not running or using Yosemite, so I cannot help you with your Yosemite issues,
There are others here who can help you with Yosemite.
Good Luck.

Since upgrading from Lion to Mountain Lion, when I login 1 of 2 disk images I have set to open on login does not mount.

Since upgrading from Lion to Mountain Lion, when I login 1 of 2 disk images I have set to open on login does not mount. It worked under Lion. Stickies opens just fine. The disk images are sparse disk bundles. Are there any suggested remedies? I have already tried repairing permissions. One interesting thing is that previously in LIon, the disk images were just sparse images, not sparse bundles. I switched to bundles after reading that Time Machine backups of sparse bundles would not copy the entire image, only the changed parts. The sprase images are for sharing of photo and iTUnes libraries among multiple family member on the same computer.

If it is working as expected, what do you need with the old backup?
If you want to be able to go back to where you were prior to an upgrade, isolate that backup and don't use it again. As far as Time Machine can tell, the whole drive changed.
The link I posted contains probably everything that anybody knows about Time Machine and how to manipulate it to work as you would like as opposed to how it was designed to work. There are FAQs to continue a backup as opposed to starting fresh, but I wouldn't recommend it for the reasons above. Pondini probably doesn't, either.
If you are going to do a wholesale upgrade of the OS, I would create a bootable clone using something like Carbon Copy Cloner or Super Duper. A bootable clone on an external drive can have you back up and running instantly if the upgrade fails in any way. If the upgrade goes fine, store it away in case you find the current system isn't to your liking.

I cannot order photo prints from iphoto. Error says that the delivery address is in an unsupported country. The address and my account are in the UK. Does anyone have any ideas?

I cannot order photo prints from iphoto. Error says that the delivery address is in an unsupported country. The address and my account are in the UK. Does anyone have any ideas?

I cannot order photo prints from iphoto.
Are you trying to print from iPhoto on your Mac or iPad/iPhone? If you are trying to print form yor Mac, check, if the Print Products Store in the iPhoto Preferences > Advanced is set to U.K.
Also the bimmling address, Delivery address, the country for your AppleID and Credit Card must all be in the same country. Check this document:
http://store.apple.com/uk/help/print_products
-- Léonie

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is j

I am batch processing in PS 2014 (watermark and saving as jpeg from ps file). I get the message for some but not all 'this file needs to be saved as a copy with this option'. And then I have to save it manually. Does anyone know why this happens? (It is just a plain photoshop file, a watermark is added, then save as jpeg - the jpeg is saved to a different folder than the original photoshop file.) It happens for about 10 of 30/40 files approximately . Thank you, Kathryn

I believe I have figured it out - I need to flatten the image, even though there are no layers except for layer 0, first.

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do?

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do? Can I find the original serial number in my old Imac?

You'll have to contact Apple. See Pro Application Replacement Serial Numbers

How can I clean all data in a database but keep all datafile still same nam

hi,
How can I get a easy way to clean all data in a database but keep all datafiles still same name and location just like a new created database?
dbca has two choice: create templet without datafile or with all datafiles but not empty datafiles.
thanks

What version is your database? DBCA in 10gR2 allows you to create a template from an existing database using only the structure. From DBCA
From an existing database (structure only)
The template will contain structural information about the source database including database options, tablespaces, datafiles, and initialization parameters specified in the source database. User defined schemas and thier data will not be part of the created template.

Many of my recently uploaded photos are horizontal when they should be vertical, and vice versa. I've corrected all these on my laptop but in my iPad and i Phone photo streams they are still mixed. How can I fix this? Thanks.

Many of my recently uploaded photos are horizontal when they should be vertical, and vice versa. I've corrected all these on my laptop but in my iPad and i Phone photo streams they are still mixed. How can I fix this? Thanks.

Add the corrected ones to your PS - PS contains only what was added to it - changes made are not applied to the PS - you have to re add the updated photos
LN

IPhone 3G Won't Back Up In iTunes Since Upgrading From XP to Windows 7

I currently own an iPhone 3G which has worked perfectly and synchronized with iTunes for the past 18 months. I recently upgraded my OS on my PC from Windows XP to Windows 7. Obviously i had to wipe the hard drives and re install everything. Since then my iPhone will not back up with iTunes. iTunes recognises my phone and says it is up to date but when it goes to 'Back Up iPhone' it just seems to freeze after about 10 minutes and nothing happens apart from iTunes freezing too.
It came up with a message the first time i plugged it in after the upgrade which said 'This iPhone is already Synched with a different library' it then asked me if i wanted to synch it with the new library or merge them. I opted to synch it with the new library and ever since then it has never once worked in over 3 months.
Can anyone help please ??

I had sync issues with my iphone and itunes on Win7. Seemed to last for ever, I ended up buying a new sync cable and all my problems seemed to go away.
The other thing you can try is to launch itunes as administrator if that does work try launching itunes in XP compatibility mode. Both of those worked for me off and on as I struggled with this issue until I bought the new cable.

Since upgrade from Exchange 2007 to Exchange 2013 the conversations in Outlook do not group by subject

Hi Microsoft,
Since we have upgraded from Exchange 2007 to 2013 users complain their conversations in Outlook are no longer grouped based on the subject of an e-mail. I looks like Outlook uses other message properties for grouping e-mails in a conversation.
I have investigated all the forum topics and see that with exchange 2010 there is support added for the use of conversation-ID's. However the functionality to automatically group e-mails with the same subject in one conversation in Outlook is gone!
I would like to know if there is a fix to implement so that some our users get this functionality back. For Example: Let the exchange server not generate conversation-ID's and message-ID's for certain users.
Your help is greatly appreciated!

Totally correct!
If you don't plan to maintain Outlook then you plan to fail :(
Additional links etc are in here:
http://blogs.technet.com/b/rmilne/archive/2013/07/18/patching-exchange-don-t-overlook-outlook.aspx
Cheers,
Rhoderick
Microsoft Senior Exchange PFE
Blog:
http://blogs.technet.com/rmilne
Twitter:   LinkedIn:
  Facebook:
  XING:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Since upgradeing from firefox 11 firefox 14 wont translate simplified chinese

when I was using Firefox 11 and all updates in just the 11 series when i used to go to sites like postal tracking from china (17track.net) it is part English and part Chinese. The Chinese parts were automatically translated to English. Since upgrading to Firefox 14 it wont translate the simplified Chinese even when using add on translators. Why was this not a problem for ff 11 and how can i fix this in ff 14.

You can try this bookmarklet (requires Flash to be working):
*http://googlesystem.blogspot.com/2009/11/google-translation-bar.html
See also:
*http://translate.google.com/translate_tools
* https://addons.mozilla.org/firefox/addon/google-translator-for-firefox/

Problem since upgrading from LR 3.3 to 3.4

Since upgrading to LR 3.4 I get an error massage saying LR has to close 2 - 3 time a session. On one occassion while importing files from a card LR crashed and XP Home (SP3) restarted.
On each occasion the Application Event log reports this:
Event Type: Error
Event Source: Application Error
Event Category: None
Event ID: 1000
Date: 4/29/2011
Time: 6:28:05 PM
User: N/A
Computer: BLOTHIAN
Description:
Faulting application lightroom.exe, version 3.4.0.10, faulting module <...> they appear to be limited to these two modules:
msvcr100.dll, version 10.0.30319.1, fault address 0x0008d635.
ntdll.dll, version 5.1.2600.6055, fault address 0x0000100b.
Any thoughts?
Bain Lothian
[email protected]

Digging a bit deeper in the events viewer of Windows 7 the "Faulting module path" points to the file MSVCR100.dll (version 10.0.30319.1) inside the System32 directory of the Windows 7 installation. Since the version of Lightroom is the 64bit version, it should point to SysWOW64.
Anyway, the crash happens only on Windows 7 64bit with the 64bit Lighroom version. An installation of Lightroom on a old 32bit XP SP3 machine works without trouble.
EDIT: Switching back to Lightroom 3.3 and the continues crashes are gone. Resolved. Let's wait for LR 3.5.

Since upgrade from 22 to 23, FF says all my addons are disabled, but they (all) seem to function, so in fact they are 'enabled' .

Similar Messages

Maybe you are looking for