SINCE UPGRADE TO 5.0 MY FAST DIAL ADD ON DOES NOT WORK

THE FAST DIAL TABS NO LONGER APPEAR WHEN OPENING A NEW TAB AND i CAN'T ACCESS THE ICONS FOR EACH STORED SITE

I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

Similar Messages

Fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue

fast dial (visual bookmarks) does not work with the new 5.0 upgrade. How do I correct this issue Asked this question yesterday. I desperately need info, will I ever be able to use fast dial again?

I tried it and it WORKED....I even tried the other version BEFORE this one and it didn't work so I tried yours and it worked like a charm so THANKS brother....

HT3180 I owned an Apple tv and after upgrade my internet to higher speed my Apple Tv does not work the only message that show on the screen said if time and dates are not found go to apple/support/tv tried almost everything and nothing. Please somebody

I owned an Apple Tv and since I upgrade my internet to higher speed my Apple Tv does not work. Please someone help.

In most scenarios you shouldn't need to forward ports, however if you need to, you may be best contacting your ISP.
As with most router issues, I would recommend that you contact your ISP with details of your problem (assuming that it was your ISP that provided it to you).
There are simply too many manufacturers with different software features and settings and often different names for such features and settings, that the best advice will likely come from those that are knowledgeable about your particular router.
Make sure your router/computer allows access over the following ports
Port
Type
Protocol
Used By
53
TCP/UDP
DNS
DNS
80
TCP
HTTP
AirPlay, iTunes Store
123
TCP/UDP
NTP
Network Time
443
TCP
HTTPS
AirPlay, PhotoStream, iTunes Store
554
TCP/UDP
RTSP
AirPlay
1900
UDP
SSDP
Bonjour
3689
TCP
DAAP
iTunes, AirPlay, HomeSharing
5297
TCP
Bonjour
5298
TCP/UDP
Bonjour
5350
UDP
NAT
Bonjour
5351
UDP
NAT
Bonjour
5353
TCP/UDP
MDNS
Bonjour, AirPlay, HomeSharing
8000-8999
TCP
iTunes Radio Streams
42000-42999
TCP
iTunes Radio Streams
49159
UDP
MDNS (Win)
Bonjour, AirPlay
49163
UDP
MDNS (Win)
Bonjour, AirPlay
The following article(s) may help you.
Troubleshooting Home Sharing
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings

HT5594 I upgraded to iOS 7 and my location service button does not work. How can I turn it back on?

I upgraded to iOS 7 and my location service button does not work. How can I turn it back on?

Settings>General>Restrictions>Privacy>Location Services. Have you restricted it?

Trusteer add-on does not work having upgraded to Firefox 7.0

Having upgraded to Firefox 7.0 today, the Trusteer Rapport does not work anymore. Thanks to advise.

Hello, The fix was sent yesterday morning by Trusteer. Hereunder is the link
Hello,
Thank you for contacting Trusteer Technical Support.
We are glad to inform you that a version of Rapport which supports Firefox 7 has
been released and is now available for download in the following link:
http://www.trusteer.com/book/rapport-installation-links

Since i have down loaded the new software my wifi does not work I have been to a apple store and they said it is a hard ware issue I do believe it is not my fault has the wifi workded before cheers Ben..

Since I have down loaded the new software my wifi does not work. I have been to a apple store and they said its a hardware issue. My phone was fine before the down load.

What is your technical support question for these user to user technical support forums?

I have a 2013 macpro I upgraded to yosemite. Now I find time machine does not work, nor my old back up using a click free wireless back up. What is the status of time machine and yosemite?

What is the status of time machine not working with yosemite?
I upgraded mu mac pro to yosemite and since have found time machine does not work.
Also, my old backup via a clikfree wireless backup does not work any longer.
Is anyone working on this issue?
Is there anyway I can backup my information today and until time machine &
yosemite get fixed?

These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

I just upgraded to the maverick and, of course, the iPhoto does not work with it. How do I upgrade to version 11? I cannot find it anywhere

Recently upgraded to Maverick and the version of iphoto does not work with it. How do I get and download the version 11? I can't find it anywhere

Which iPhoto? 9.4.6 and 9.5.1 work here.
FWIW, iLife '11 is available here: http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES

I upgraded my Mac Pro to Yosemite and now CS5 does not work.

Help.....Adobe Photoshop CS5 does not load now that I upgraded my MacPro to yosemite....anybody have this problem and how was it fixed?

Yes. The Yosemite upgrade is notorious for damaging CS5 installs. Please reinstall and let us know how it goes.
Also make sure Yosemite is upgraded to 10.10.1
The reinstall will set your instal to 12.0.0 If Help > Updates does not work, go here Adobe - Photoshop : For Macintosh
download and apply the updates for Photoshop and Adobe Camera Raw.
Gene

Since upgrading to 10.8.3 my key board backlight does not come on until I enter my password

(13" MBP mid 2010). Since upgrading to 10.8.3 my keyboard backlight does not come on until after I enter my password and mac system comes up. Before upgrade the keyboard backlight would come on right after I pushed the On button. It makes it difficult to enter my password in a low light setting because I can not see the keys to type my password in. I have been using the light off of the display to help light the keyboard to see to enter my password. Any know fix for this?

Hey Doug,
Thanks for your post, and welcome to the Apple Support Communities.
I understand that your keyboard backlight is not working upon startup, the following may resolve your issue:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
After performing normal troubleshooting, these symptoms may indicate that an SMC reset may be necessary:
Lights
The keyboard backlight appears to behave incorrectly (on Mac computers that have this feature).
You may also want to reset your computer's PRAM:
OS X Mountain Lion: Reset your computer’s PRAM
http://support.apple.com/kb/PH11243
Note: Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
Thanks,
Matt M.

I just upgraded to OS X 10.9.2 My mail does not work App store is not working. Any advice?

I just upgraded and now mail not working. Any advice?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Attempted to upgrade to Mavericks from Lion 10.7.5 and does not work, what gives?

Attempted to upgrade to Mavericks from Lion 10.7.5, but whenever I attempt the upgrade the Apple prompt replies 'cannot complete'. I may be mistaken, but I think my Mac Pro is qualified (MacPro 1.1, Dual-Core Xenon @2.66 GHz, 6 GB DRAM). What gives?

The MacPro 1,1 does not support Mavericks. It has to be a 2008 model or later:
http://support.apple.com/kb/ht5842

After I upgrade to Lion OS my Lexmark printer mod. x1185 does not work anymore. I need the scan and copy functions, since I have a HP laserjet for printing. Even in the new (sep/08) driver file from apple there is no driver for my printer. Anyone could h

Driver for lexmark x1185 (series 1100) for MAC OS 10.7. Anyone has a solution ?

You should contact Lexmark. They have not released a driver for this printer since 10.3, and they no longer sell it. You could try the Generic PostScript PPD and see if you get limited functionality.
Hope this helps.

Late 2010 MacBook Pro 15", upgraded to Lion on Sat 23rd no external display does not work

Hi all,
Wanted to ask this question here see if anyone might have a solution to my problem. I have a Late 2010 Macbook Pro 15" which I upgraded to Lion yesteray. Ever since that upgrade when I try to connect to my TV to watch a video no joy the image looks like the colours are out.
I have tried it on different resolutions and always the same. Then for some reason the MacBook Pro split the screen in two. So now I see the right of the screen on the left of the TV and the left on the righ with a big black line done the middle.
Priror to the Lion upgrade everything was fine. Only since Lion has this been a problem.
I am using a Minidisply to HDMI cable to go direct into my Phillips 42" Plasma, and I have not got a clue why this is doing this. The strange thing is it works ok on my Samsung BX2450 down the same cable no problems at all just the TV that has issues.
Any suggestions?
Cheers
ZeroG

Hi Cyberviper42,
I understand that you are seeing some issues with your connection to the internet on your computer. I have an article for you that will help you troubleshoot this issue:
Wi-Fi: How to troubleshoot Wi-Fi connectivity - Apple Support
https://support.apple.com/en-us/HT202222
Thanks for coming to the Apple Support Communities!
Regards,
Braden

MS Windows Media player Firefox plugin 1.0.0.8 is installed still after upgrade from FF 3.5. to FF4, but it does not work anymore on Windows 7. The player buttons doesn´t show up. However, it works on WinXP after the same upgrade.

Windows 7 professional with Windows Media Player 11 and WMP plugin for Firefox 4 doesn´t work, but on WinXP it does work normally with the same plugin version after upgrade to FF4.

Try http://forums.adobe.com/thread/892474

SINCE UPGRADE TO 5.0 MY FAST DIAL ADD ON DOES NOT WORK

Similar Messages

Maybe you are looking for