Since upgrading my iTouch to 6.0 I can no longer connect to Express in my office. Others sitting beside me have no problem. What gives?

After I bought my iTouch, I set up a Wi-Fi network at my office. It worked great and I could connect from most all areas in the building. A couple months ago I upgraded the iTouch system to 6.0. Since then I have only been able to connect very near the office where the express is. Other people, sitting right next to me, can connect there iPads/laptops with no problems. At home, I get a strong connection on my MacBookPro but no connection on my iTouch sitting right next to it.
I since upgraded to 6.0.1 thinking that my issues had been noticed by others and a fix was available. No fix. Bummer!

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Similar Messages

TS4268 Since upgrading to iOS 7.0, my friend can no longer text me. I get all other people's texts with no problem. I can text her, she can't text me. It bounces back to her phone as "message undeliverable". Does anyone know what to do about that?

Since upgrading to iOS 7.0, my friend can no longer text me. I get all other people's texts with no problem. I can text her, she can't text me. It bounces back to her phone as "message undeliverable". Does anyone know what to do about that?

your number can remain on the imessage server for some time

Since upgrading my phone to the iOS7, I can no longer download music or apps via my phone or computer - on my phone, it wont let me accept the 'terms

Since upgrading my phone to the iOS7, I can no longer download music or apps on neither my iphone or through itunes on my computer. On my phone, it won't let me accept the terms & conditions. On my computer, an error message keeps flashing up: 'Error (-50)'. Please help?...

Sounds like the device is in recovery mode. You will need to restore the phone. See this support document for instructions. http://support.apple.com/kb/HT1808

Since updating my iPhone 3gs to ios6 I can no longer connect it iTunes. How can I fix this?

Since updating my iPhone 3GS it IOS6 I can no longer connect to iTunes. How can I fix this? I checked the settings for iTunes and it appears to be correct.

I have now managed to sign into iCloud but I still don't seem to be able to sign up my Apple ID for iMessage

Since upgrading to FF Ver. 24, I can no longer view videos/clips from fox News. What add-on do I need? Everything else seems to be working OK.

Since upgrading to ver. 24, I can no longer view the video clips from Fox News. the clip comes up but will not play. I don't have a problem using IE. I seldom use IE and FF is my main browser. What add-on or control do I need to rectify this situation? My e-mail is [email protected]
''(email obfuscated - please be cautious with posting your email address - c)''

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

Since upgrading to FF 7.0.1 I can no longer view .pdf files from web pages and there is no plug in..

The .pdf viewer plug in for FF3.6 worked fine but upgrading to FF7.0.1 has caused the problem. There are no such plugins for this version. I must go back to FF3.6 with the plugin and then if one for FF7.0.1 doesn;t exist by the time Mozilla stops supporting 3.6 I will go back to Safari as my browser I guess.

I already reinstalled the Adobe's and it didn't solve anything. What I did find is that when faced with a pdf I want to view, I have to right click "Save Link As..." and then I can view the resultant pdf. Cumbersome perhaps but I guess it works.
Thanks though for the snotty tone in your response; indeed I realize its not FF's job to ensure my machine is updated. However I'm a business guy not an IT guy and my guess is the business guys at Mozilla would want to be aware of things that would impact the use of their product. And if moving forward with new iterations and updated versions of their product changed the users experience in a negative fashion, however caused, I'm sure they would want to consider what actions they may or may not want to take.
Furthermore its unfortunate that you mistakenly interpreted my words to mean that I expected them to rectify the issue for me. I simply stated that currently it doesn't work for me and if that doesn't change, I would have to move in a different direction. Simple as that. It's not a big deal.
So perhaps your typical IT guy "users are so dumb" mantra was misplaced here.

Since upgrade to os5 video files from emails can no longer be viewed, they are downloaded as before, but I am no longer asked which program to open file with. I used Azule without problems before os5' now os5 tries to open video file and stalls. Any fix

Os5 must have changed playback functionality of video files, it tries to play .wmv files, but crashes...it shows "loading", but nothing happens. Before update it would prompt me to choose an app to show the file, Azule worked great, but now it doesn't offer to chose an app.
How do I fix this?

Indeed you were right. I though that in single mode all services were not started, but apparently I was mistaken.
However, as I feared, there seemingly is no useful info in it.
journalctl -x -b -1 -> http://sprunge.us/eYeL
Also:
root@the_shire / # pacman -Q | grep ati Fri 06/12/2013 22:05:58
ati-dri 9.2.4-1
notification-daemon 0.7.6-2
octave-communications 1.1.1-1
startup-notification 0.12-4
xf86-video-ati 1:7.2.0-1
root@the_shire / # pacman -Q | grep xf86 Fri 06/12/2013 22:06:08
lib32-libxxf86vm 1.1.3-1
libxxf86vm 1.1.3-1
xf86-input-evdev 2.8.2-1
xf86-input-synaptics 1.7.1-1
xf86-video-ati 1:7.2.0-1
xf86-video-fbdev 0.4.4-1
xf86-video-intel 2.21.15-1
xf86-video-modesetting 0.8.1-1
xf86driproto 2.1.1-2
xf86vidmodeproto 2.3.1-2
Last edited by Beregond (2013-12-06 21:07:14)

Exchange 2013 Upgrade to CU7 from SP1 - installs successfully - Can no longer connect via ECP/OWA/Powershell/Outlook/Autodiscover

Hi There,
I am having massive issues with my Exchange Server.
I have 2 Nodes, one has CAS and Mailbox Roles, the other just Mailbox.
I "upgraded" the CAS server to CU7 without any errors / issues.
Once I had restarted, nothing worked any more.. I couldn't access ECP, OWA, Powershell, Autodiscover or get outlook to connect.
I managed to get Powershell working, but changing the physical directory to "C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\PowerShell" from "C:\Program Files\Microsoft\Exchange Server\V15\FrontEnd\HttpProxy\PowerShell"
But for the life of me I cannot get ECP or OWA working (haven't even tried anything else)!
I am getting a load of Events with ID 1003.
The only error I am getting is:
Server Error in '/ecp' Application.
Method not found: 'Boolean Microsoft.Exchange.Net.Wopi.WopiRequestPathHandler.IsWopiRequest(System.Web.HttpRequest)'.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.MissingMethodException: Method not found: 'Boolean Microsoft.Exchange.Net.Wopi.WopiRequestPathHandler.IsWopiRequest(System.Web.HttpRequest)'.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[MissingMethodException: Method not found: 'Boolean Microsoft.Exchange.Net.Wopi.WopiRequestPathHandler.IsWopiRequest(System.Web.HttpRequest)'.]
Microsoft.Exchange.HttpProxy.ProxyModule.AllowAnonymousRequest(HttpRequest httpRequest) +0
Microsoft.Exchange.HttpProxy.ProxyModule.OnAuthenticateInternal(HttpApplication httpApplication) +51
Microsoft.Exchange.HttpProxy.<>c__DisplayClass5.<OnAuthenticateRequest>b__4() +447
Microsoft.Exchange.Common.IL.ILUtil.DoTryFilterCatch(TryDelegate tryDelegate, FilterDelegate filterDelegate, CatchDelegate catchDelegate) +40
Microsoft.Exchange.HttpProxy.Diagnostics.SendWatsonReportOnUnhandledException(MethodDelegate methodDelegate) +408
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +92
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +165
Which is almost meaningless... but maybe someone out there has some idea?
Unfortunately this is very urgent for me a these are production servers and currently there is no email for my company.
So Please please please can someone help.
I have tried many many many things from various sites, and so far nothing has worked.
Thanks,
-Tim

Hi Tim,
We can do the following steps to have a try:
1. Check Application settings in IIS Application under Exchange Back End web site for BinSearchFolders value.
a. Open IIS Manager. Expand Sites > Exchange Back End.
b. Click ecp. Open Application Settings in /ecp Home.
c. Please check whether the value for “BinSearchFolders” is changed to an invalid value.
2. Verify Authentication settings for OWA and ECP.
a. In IIS manager > Default Web Site, make sure Anonymous Authentication is Enabled in Authentication.
b. Confirm that "Require SSL" is checked on the root of the default website.
c. Make sure the Basic and Forms authentications are enabled in Default Web Site and Ntlm, WindowsIntegrated authentication methods are enabled in Exchange Back End for both OWA and ECP.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support

HT1695 i recently upgraded to ios6 on my ipad and now i cant connect to my wifi. all my other devices work. i have tried resetting network settings. please can you help this is now getting riduculous. i am currently in tanzania and i have no access to any

how can i relsolve my wifi issue with ios6 with my ipad. its been three days without internet. my ipad is having trouble detecting a wifi signal it finds my home network and then disaapears within seconds

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

HT204076 Since I updated my iPhone 4S to iOS 8.1.2 last night, I can no longer connect to my imaps server.

Since I updated my iPhone 4S to iOS 8.1.2 last night, I can no longer connect to my imaps server. Other clients can connect to the server. Rebooting the device is no help. Before the update (i.e. 8.1.1), it was working fine. Is this a known issue?

No, it is not a known issue. It is a known non-issue. Try resetting your IMAP login ID and password. Both the incoming and outgoing. If that fails delete the account reboot the phone, and add it back.

HT5569 Since upgrading to 7.1.1 last week, I can no longer connect to WIFI on my iPhone 4S

Since upgrading to 7.1.1 last week, I can no longer connect to WIFI on my iPhone 4S

No, it is not a known issue. It is a known non-issue. Try resetting your IMAP login ID and password. Both the incoming and outgoing. If that fails delete the account reboot the phone, and add it back.

Since upgrading iTunes 10, my computer and iTunes are no longer recognizing my iPod Touch.

Since upgrading iTunes 10, my computer and iTunes are no longer recognizing my iPod Touch. Would a full reset of my iPod resolve this? The iPod is still working, I just can't update apps or add songs... The computer says that "one of the USB devices attached to this computer has malfunctions, and Windows does not recognize it. iTunes is not seeing the iPod at all....

Try here:
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
You have a driver/service problems and that is covered in the above.

After upgrade to 10.7.1 users can no longer connect to shares

Ok , im not an admin to start off, but after upgrading the OSX lion server to 10.7.1 i can no longer connect to the sharepoints on my mac mini server.
Through SMB or AFP .. i tried using the connect to server on one of my clients and when i attempt to log in , it shakes the login window as if my password were not accepted.
Heres where it gets a little confusing to me, i have 2 mac mini servers both running OSX LION SERVER 10.7.1 .... The one that I CAN NOT LOG INTO is my OD Master... the second one is just used for file sharing...
WHEN i attempt to login into the file share server (which is connected to the OD Master which is rejecting my user logins) i can connect JUST FINE and access the sharepoiints on that server...
A couple more weird things... on the OD MASTER (again the server which is rejecting all user logins) I CAN login with my admin credentials and access the sharepoints... ??
-- when i am locally logged into the OD MASTER server, if i add a new sharepoint from scratch and edit the ACL , NONE OF MY USERS SHOW UP nor any of my user groups... it only allows me to add the Administrator access to that share..
Have i done something very wrong somehwere? this server that is having a problem is only used as a OD master and File share nothing else..
I did not change any settings besides add a new mac mini server to the OD and performa the 10.7.1 upgrade.
ANY HELP WOULD BE HUGE as i have spent a 12 hours trying to figure this out before i resort to a re install.

I've only one hint to you, cause I've mot on Mac-Server.
With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
This had caused problems with some NAS systems too.
Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
Lupunus

Can no longer connect to Airport Express with upgrade to iTunes 10.1

Since I upgraded to iTunes 10.1 I can no longer connect to my Airport Express (unknown error-15000). Another computer on my betwork running an older version of iTunes still works on the Airport Express.
Any ideas? I have tried to uninstall and reinstall airport express with no success.

Rather than disabling the firewall, try making sure you've got exceptions in it for BonJour. Although the following document is about a different error message, the instructions in there are worth trying. (At step 7, make sure there's an exception for BonJour as well.)
[iTunes for Windows: Bonjour alert due to firewall, security, or proxy software|http://support.apple.com/kb/TS3448]

Can no longer connect to certain shares after upgrading to 10.8.4

After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
Can anyone help?
Thanks!
Jon

No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

Since upgrading my iTouch to 6.0 I can no longer connect to Express in my office. Others sitting beside me have no problem. What gives?

Similar Messages

Maybe you are looking for