Single cell JTextField editor in JTreeTable

- I have a JTreeTable.
-I want to create a leaf renaming scheme in which a JTextField pops up over the leaf node during editing
-Allows the user to input text. When focus is lost, the text will be passed to the node user object represented by the leaf
-Textfield is removed.

i have seen that link before and i could not get the demo to compile somthing like classes dont exsit and i could not run it wrong version of JDK it uses 1.1 and i only have from 1.3 up. so sorry i cant help you. but i hope that it works
David

Similar Messages

  • How to find multiple keys in single cell using Numbers?

    I'm trying to add functionality to one of my Numbers tables where want to check a single cell for multiple keywords from a list. The hole thing works perfectly fine in Excel but it behaves differently in Numbers.
    The formula I am using is:
    =IF(ISERROR(LOOKUP(2^15;FIND($E$2:$E$11;A2)));"not found";"found")
    The following screenshots show that it correctly finds the keys in the cell when using Excel but not in Numbers. Although, it seems to work if the key is in the same row as the input cell.
    Excel table using the formula I posted in the C column:
    Numbers table using the formula I posted in the C column:
    Would be really happy if somebody knows how I could accomplish that!
    Cheers,
    Maik

    If you are working in Numbers you can do this efficiently with a small AppleScript without going back to Excel or clone. One click and you get the following result:
    This script works with Numbers 2.3, which your screenshot suggests you are using. If you are using Numbers 3 it needs a very small adjustment.
    This is the script:
    --https://discussions.apple.com/thread/6315365?tstart=30
    property inputCol : 1 --> col A, as in example
    property resultCol : 3 --> col C, as in example
    property keysCol : 5 --> col E, as in example
    property targDoc : 1 --> 1 is front document; can change to "MyDocName"
    property targSheet : 1 --> 1 is first sheet; can change to "MySheetName"
    property targTable : 1 --> 1 is first table; can change to "MyTableName"
    tell application "Numbers"
              set t to document targDoc's sheet targSheet's table targTable
              set keysList to t's column keysCol's cells's value
              repeat with i from 2 to t's row count -- assumes 1 Header Row
                        set inputVal to t's row i's cell inputCol's value
                        if inputVal is not 0 then --skip blank cells; Numbers 2 reads blanks as 0
                                  --check if Input matches a key:
                                  if inputVal is in keysList then
                                            set t's row i's cell resultCol's value to "found"
                                  else
                                            set t's row i's cell resultCol's value to "not found"
                                  end if
                                  --check if Input contains a key:
                                  repeat with aKey in keysList
                                            if inputVal contains aKey then set t's row i's cell resultCol's value to "found"
                                  end repeat
                        end if
              end repeat
    end tell
    --end of script
    To run, copy into AppleScript Editor, change the properties if needed, and click the green triangle 'Run' botton.
    SG

  • Set_cell_Editor for single cells rather then complete column

    Is it possible to set a cell editor (eg a link) only for single cells of a column.
    Regards
    Rene

    hi rene.....
            you cannot do that......
            may be you can have an extral column called enabled or disabled and bind that property to the enabled property of the cell editor so that only one cell will be enabled while others disabled.
    ---regards,
       alex b justin

  • Concatenation of Data from 4 infoobjects into a single cell in Bex Report

    Hi,
    I have loaded ODS with the description data. The source system for loading the ODS is the flat file. The ODS data should be a replica of the flat file.
    In the flat file, there is a description field corresponding to a particular ID. This Description is greater than the standard 60 char length. So, I had to split the description while loading the flat file using single line routine in the Transfer Structure.
    So, while loading different  the data, I split the description field data from the flat file into 4 infoobjects and the flat file data was loaded into the ODS.
    Now, from the reporting point of view, I need to display the entire description data from the 4 info-objects into a single cell in the Bex report.
    Please suggest a solution for this.
    <b>****Points will be awarded***</b>

    Hi Vineet,
    Thanks for the response.
    Could you please help me out with the VBA script(code) that needs to be written in the macro.
    Thanks in Advance.
    <i><b>****Points will be awarded****</b></i>
    Regards,
    Hitesh Shetty.

  • Multiple values in a single cell in report !!

    Hello,
    I want to display multiple values in a single cell, each value separated by comma.
    Ex: I have Employee and Department.
    If a employee works for many departments, all the Department names should be displayed in the same cell in the report.
    Please help !

    Thanks for your replies !
    Is there any other way to achieve this ?
    There is 1 InfoObject which has 2 fields Employee and Department.
    Employee     Department
    001                A
    001                B
    001                C
    In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
    Can this be done in the backend through a ABAP code?

  • How to disable single cell in table control.

    Hi my requirement is to disable single cell in the table control. Please let me know How to do this.
    If possible please provide good module pool examples.
    Harish

    Hi,
    I´m not quite sure if this is gonna work. You have to make a loop over the screen and then you can change some characteristics of it, which includes the Input option:
      LOOP AT SCREEN.
        IF screen-group1 = 'ABC'.
          screen-input = '0'.
          MODIFY SCREEN.
        ENDIF.
      ENDLOOP.
    I´ve used this code for selection screens but could help you. Check in SE11 all options for SCREEN.

  • Is there a way to add multiple borders to a single cell with one click or do I have to add one border at a time for example, one cell with borders on three sides?

    I would like to know if there is a way to add multiple borders to a single cell or selection of cells in one click.  At this time, if i want to add for example a top border and a bottom border to a single cell I have to do this in two steps: first select the top border, style, thickness, and color, and then next select the bottom border, style, thickness, and color.  Is there a way to select the top and bottom border of a cell in one click?  Clicking on the top border then holding down the command key while selecting the bottom border does not work, nor does holding down the option key, the control key, or the shift key work. Thanks for your help.

    Thank you for the suggestion but this did not work for my Mac.  When a cell is selected for which I want borders, the entire cell is lit up.  Then when I go to the border tool and select style, thickness, and color, the entire lit up cell takes on the border, that is the Outside Edges of the cell now have a border.  So selecting the style, thickness, and color first doesn't work.
    If I select the top border first (or any border), the drop down goes away and I can't select multiple borders - I get to choose one at a time.  After selecting one border, style, thickness, and color, said border is now on the spreadsheet.  Then I go back to the border selection and pick another border and the the previously selected style, thickness, and color reverts to null, so I start over with the new border style, thickness, and color.  Yes, it is tedious.
    The Fix would allow the user to select multiple borders, say left and right, before the drop down goes away after selecting only one border
    Does it have something to do with Allow or Disallow border selection?
    I have Numbers '09 version 2.1 (436)

  • I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

    I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

    jpqcampos wrote:
    This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
    You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
    And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
    Here are the two tables, Data on the left and Summary on the right. Notes below.
    The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
    Data table:
    D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
    D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
    D3 (and filled down the rest of column D):   =AND(OR(B2,C2),NOT(OR(B3,C3)))
    The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
    Summary table:
    Column A contains labels for the age ranges to be counted.
    Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
    C2 (and filled right to column D, then both filled down to row 5):
        =COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
    Two changes from the previous example:
    COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
    The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
    See note below regarding my earlier formula.
    When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
    Close the reorganize pane, and the 'data entry form' is ready to use.
    To use, enter the age first, then check one of the boxes.
    As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
    Regards,
    Barry
    Note regarding formula in my earlier post:
    The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
    In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
    Fill down to E8.
    Ignore the instructions (in that post) following "Fill down to E8."
    B

  • Show top n sum of a dimension in a single cell

    Hi experts,
    is it possible to show the sum of top n values in a single cell?
    example:
    Table shows (top 3)
    USA___________180
    Germany_______150
    Italy___________100
    Sum___________430
    single cell should show
    430

    Create a variable "rank" as
    =Rank([Measure])
    Then, in the standalone cell, enter the formula:
    =Sum([Measure] Where ([rank] < 4))

  • How do I outline a single cell in a numbers spreadsheet

    I am trying to emphasise the borders of a single cell in a numbers spreadsheet;  I follow all the instructions I can find in mac help, they just don't make any difference.  I may be ancient, but I can usually suss things out in time; this baffles me.  However, I do realize I may have blundered into the wrong type of help forum here.

    To place borders around a cell in Numbers -
    Make sure the cell has been selected, i.e. is the active cell.
    Click the Inspector tool in the Toolbar -
    Then click the Table inspector icon in the Inspector window's toolbar -
    In that screen, look down to the section "Cell Borders"...
    Click the button for full border (arrow in pic above) -
    Adjust the color of the border as needed for visibility (oval in pic above) -
    And then you may need to adjust the line weight (thickness) to get it visible on-screen. To do that, click the dropmenu in that section showing "Thin" and select the next item underneath "thin" in the menu. This will make the item just to the right of that menu active - you can then use the arrow-buttons to make the line weight thicker. Although the thinnest setting (0.25 pt) may print okay, on some screens it just doesn't show - especially of the border color has not been set to a hard black. Making it thicker can help in viewing it on-screen.

  • How do I resize a single cell in a TableView?

    So I have a tableview, and when a user selects it, I would like to resize that particular cell.
    I have all my code in place in terms of drawing that particular cell when selected, but my only problem is I can't seem to figure out how to resize a single cell. For example, if all my cells have a height of 40, I want the selected cell to have a height of 80. I have tried setFrame, I have tried initWithFrame when creating the cell. I figure I'm missing something pretty simple, but I don't see anything as simple as [cell setHeight] or something like that.
    thanks!

    What Rick says will work. I have done it. In some cases you may need to set the needsDisplay and or needsLayout properties on your custom cell if you have one.

  • Make the link from the single cell of Bex Report and the image of bill

    Hi guys,
    my client scan every bill and archive the image by File.net technology.
    In our Bex Report we have the Bill number and we want to make the link from the single cell and the image of bill.
    The possible paths to solve the problem are:
           Replicate the image in BW and crate a link from the single cell and the image of document.
           Create an URL link from the single cell and the image of document archived on File.net server.
    In witch way we can to implement the two paths?
    Thank you.
    Alessandro

    Hi Alessandro,
    Have you seen "How To…Enhance your Web Query with the Table Interface"?
    You can find it in media library:
    https://websmp105.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000194044
    Best regards,
    Eugene

  • How to set a single cell editable in alv Webdynpro Abap

    I am trying to edit a single cell on lead selection. here the steps i did to achive this.
    1. I added a Attribute READ_ONLY  inside my node of type WDY_BOOLEAN.
    2. i am conditionally making this Attribute - READ_ONLY = 'X'.
    3. i am binding my node with new values.
    4. for ALV here is the code i have added.
    DATA :lo_cmp_usage TYPE REF TO if_wd_component_usage,
            lr_column    TYPE REF TO cl_salv_wd_column,
            lr_table_settings TYPE REF TO if_salv_wd_table_settings,
            lt_columns TYPE salv_wd_t_column_ref,
            ls_columns TYPE salv_wd_s_column_ref,
            lr_input_field TYPE REF TO cl_salv_wd_uie_input_field,
            lo_interfacecontroller TYPE REF TO iwci_salv_wd_table ,
            lv_value TYPE REF TO cl_salv_wd_config_table.
    *Taking reference of the Component Usage
      lo_cmp_usage =   wd_this->wd_cpuse_cu_alv( ).
      IF lo_cmp_usage->has_active_component( ) IS INITIAL.
        lo_cmp_usage->create_component( ).
      ENDIF.
      lo_interfacecontroller =   wd_this->wd_cpifc_cu_alv( ).
      lv_value = lo_interfacecontroller->get_model( ).
      CALL METHOD lv_value->if_salv_wd_column_settings~get_columns
        RECEIVING
          value = lt_columns.
      LOOP AT lt_columns INTO ls_columns.
        lr_column = ls_columns-r_column.
        CASE ls_columns-id.
          WHEN 'USR_ACT_RT'.
            CREATE OBJECT lr_input_field
              EXPORTING
                value_fieldname = ls_columns-id.
            lr_column->set_cell_editor( value = lr_input_field ).
            lr_input_field->set_read_only_fieldname( value = 'READ_ONLY' ).
        ENDCASE.
      ENDLOOP.
      lr_table_settings ?= lv_value.
      lr_table_settings->set_read_only( abap_false ).
      lv_value->if_salv_wd_column_settings~delete_column( id = 'READ_ONLY' ).
    but instead of changing the particular cell where i have marked READ_ONLY = 'X' it is changing whole column 'USR_ACT_RT'  data as editable .
    If anybody can  please help ASAP

    Hi Tashi,
    Thanks for your reply,i have did the same way u are doing here for setting the READ_ONLY Attribute conditionally.
    here is my code for setting the read only attribute .
    IF NOT lo_nd_nd_cost_rate IS INITIAL.
        lo_nd_nd_cost_rate->get_static_attributes_table( IMPORTING table = lt_nd_cost_rate ).
      ENDIF.
      IF NOT lo_el_nd_cost_rate IS INITIAL.
    * get all declared attributes
        lo_el_nd_cost_rate->get_static_attributes(
          IMPORTING
            static_attributes = ls_nd_cost_rate_sel ).
      ENDIF.
      lv_datum = sy-datum.
      lv_month = lv_datum+4(2).
    ** @TODO handle non existant child
      LOOP AT lt_nd_cost_rate INTO ls_nd_cost_rate WHERE quarter = ls_nd_cost_rate_sel-quarter.
        IF ls_nd_cost_rate-quarter = 'Q1'.
          IF ( lv_month  EQ '01' OR lv_month  EQ '02' OR lv_month  EQ '03' ).
            ls_nd_cost_rate-read_only = 'X'.
          ELSE.
            ls_nd_cost_rate-read_only = ''.
    *   report message
            CALL METHOD lo_message_manager->report_warning
              EXPORTING
                message_text = lv_text.
          ENDIF.
        ELSEIF ls_nd_cost_rate-quarter = 'Q2'.
          IF ( lv_month  EQ '04' OR lv_month  EQ '05' OR lv_month  EQ '06' ).
            ls_nd_cost_rate-read_only = 'X'.
          ELSE.
            ls_nd_cost_rate-read_only = ''.
    *   report message
            CALL METHOD lo_message_manager->report_warning
              EXPORTING
                message_text = lv_text.
          ENDIF.
        ELSEIF ls_nd_cost_rate-quarter = 'Q3'.
          IF ( lv_month  EQ '07' OR lv_month  EQ '08' OR lv_month  EQ '09' ).
            ls_nd_cost_rate-read_only = 'X'.
          ELSE.
            ls_nd_cost_rate-read_only = ''.
    *   report message
            CALL METHOD lo_message_manager->report_warning
              EXPORTING
                message_text = lv_text.
          ENDIF.
        ELSEIF ls_nd_cost_rate-quarter = 'Q4'.
          IF ( lv_month  EQ '10' OR lv_month  EQ '11' OR lv_month  EQ '12' ).
            ls_nd_cost_rate-read_only = 'X'.
          ELSE.
            ls_nd_cost_rate-read_only = ''.
    *   report message
            CALL METHOD lo_message_manager->report_warning
              EXPORTING
                message_text = lv_text.
          ENDIF.
        ENDIF.
        MODIFY lt_nd_cost_rate FROM ls_nd_cost_rate INDEX sy-tabix TRANSPORTING read_only .
        CLEAR ls_nd_cost_rate.
      ENDLOOP.
      lo_nd_nd_cost_rate->bind_table( lt_nd_cost_rate ).
    please see in the below sceen shot the last two cells are editable in the User Actual Rate Column whlie the selected rows cell is not editable. Please revert if u have any input for same.

  • Hello, I would like to know how to add or delete single cell in numbers.

    Hello, I would like to know how to add or delete single cell in numbers.

    If by delete you really mean clear the contents of a cell, then just click once on the cell and hit the 'delete' button.
    Before:
    After hitting delete button:
    In some circumstances you can actually delete one cell.
    For example here, I make this choice:
    Resulting in this:
    So it's not strictly true that Numbers does not delete one cell, ever.  It can if you have a one-column table. 
    So never say never or not ever! Enough pedantry for today!
    SG

  • How could I insert just a single cell in a table (not an entire extra row or column)?

    I am having trouble making an easy edit. I need to insert an a 'CELL', but I am only being given the option to insert an entire 'ROW' or 'COLUMN'. I would like to just insert a cell and have the rest of the content below it move accordingly. Please help!

    There's no way to set it so that you're just inserting a cell and everything moves along after that cell?
    Simple answer is "No." Sorry.
    InDesign tables are not good for juggling data. If you have a project that requires single-cell-insertion on a regular basis, I suggest doing your table outside of InDesign in an app with easier table-cell-juggling tools (Excel comes to mind here) and then perfecting you use of table and cell styles so that it's easy to update. It'll always be a hassle of some kind, of course, but the hassle can be minimized.

Maybe you are looking for