Single Item drop down (View, Edit, Delete, Alert) on Companyweb List (2003)

We had a user delete an old list that was created by a previous technician. I recreated the list as best I could but I noticed the previous one had a drop down on the first column and I don't see that anymore. The drop down had (View, Edit, Delete, Alert)
each item in the first column would have this.

Kris,
Go to "Modify settings and columns" 
select the column named "Title (linked to item with edit menu)" and rank it as first column
like below
 You will get (View, Edit, Delete, Alert)
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Similar Messages

  • HT2905 i am trying to delete duplcates" from my i-tunes....sounds easy...except I dont have a "show duplicates" in my drop down "view menu" !! help please

    Anyone help?? I am trying to remove duplicates from my Itunes library....looks easy, except I dont have a "show duplicates" tab in the drop down "view " menu !!
    So, what can I do? thanks

    Dear iTunes,
    YOU SUCK.
    Seriously.
    I have used Apple products for quite some time. I have no idea why they keep changing everything that has finally become second nature! It is now MUCH more difficult - create a playlist, show duplicates, etc. Its an absolute mess and I have yet to find anyone who does not have multiple complaints.
    I have this same problem. All information I look up says use "Show duplicates", which I have done many times for years before. But now when my iPad is plugged in, that option is grayed out for me (unable to be clicked on). I went to the Apple store today and the employee couldn't even answer my questions. I am planning to go back sometime with my computer as well and beg for a solid explanation.
    Wouldn't it be nice if these tracks just didn't duplicate? That seems like a proper solution that would suit me well. Until then I just plug in, arrange by song, and go through manually deleting the extras. Often. #wasteoftime #annoying #argh
    Good luck.

  • The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

    The drop down view by menu (Song, album, etc) at the right side of the iTunes window is like a ghost. It flashes into view for a millisecond once in awhile but never lets me click on it. Anyone know what this is about and what to do?

    Short answer:
    Click Hide Song(s), it is what you wanted to do...
    Long answer:
    iTunes in the Cloud is a feature of your iTunes store account that allows you to redownload or stream your past purchases. When you delete a purchased track that is downloaded to your computer (like the first one shown here) you are asked if you also want to hide the song from iCloud. This would remove it from the computer and also stop it showing up with the iCloud symbol as the other tracks from that album (which are not downloaded) do.
    If a track shows with the cloud symbol you can play (stream) it by double-clicking the title, or click the cloud symbol to download a local copy to your library. If you try to delete one of these tracks you get a slightly different message confirming that you want to hide the track. Clicking hide will remove the listing from the library and any other device that shows your past purchases.
    Should you want to retrieve any item hidden in this way at a later date use Store > View My Account > iTunes in the Cloud > Hidden Purchases > Manage.
    To hide all your previous purchases that are not downloaded to your computer use Edit > Preferences > Store and untick Show iTunes in the Cloud purchases.
    tt2

  • Search Item drop-down does not show any data for Advanced Search.

    Hi,
    I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
    1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
    2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
    3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
    Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
    I am using OAF version 12.1.1.
    Thanks, Suresh

    Hi,
    I faced the same situation but i still waiting for the solution.. this is my problem's thread..
    Addition of LOV Search Filter using Personalization
    But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
    I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
    Thanks
    Renu

  • How to view/edit/delete the user created profile in oracle 9i? Very Urgent

    Friends,
    I logged in as system in oracle 9i.
    SQL> create profile testpro limit
    2 idle_time 1;
    Profile created.
    SQL> alter user scott profile testpro;
    User altered.
    Then i logged in to sqlplusw as a scott user.
    and i waited for 10 mins after that.
    sql> select * from cat;
    its working......
    how come? i have already set a idle time to 1 minute.
    Please correct me if im wrong.
    Also, how can i view/edit/delete the user created profile.
    Thanks & Regards
    Sathyguy
    Message was edited by:
    sathyguy

    The resource limits set for a profile are enforced only when you enable resource limitation for the database.
    Enabling and Disabling Resource Limits While the Database is Open
    ALTER SYSTEM SET RESOURCE_LIMIT = TRUE;
    http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96521/users.htm#15451
    Manu

  • How to modify the list item drop down context menu in SharePoint 2010

    Hi All,
    I have a requirement to add my name in the list item drop down context menu, already "Assigned ticket" option is available in the context menu and some names are available in the assigned ticket option. but i can't able to add my name in this options.
    Attached screenshot for reference. Thanks in advance for your assistance!
    Thanks
    Arun Prakash

    Do you know how the currently listed values got there in the first place? Some sort of custom code or action? Some background information would help. There is obviously a source feeding it from somewhere, but it's impossible for us to tell you exactly
    what just by looking at your scribbled-over screenshot
    Check WSPs that are deployed to the farm. Check for any non-OOTB site features that are turned on...

  • Auto create View/Edit/Delete cfm pages for databsae records? Anyone remember CF Studio?

    Anyone use Recordmaster wizard from back in the CF Studio
    days?? Sometimes I really miss it! Is there anything comparable
    available today for the current toolset (CFeclipse or Dreamweaver)?
    RecordMaster was a little automated wizard thing that you could
    just point to a DSN and a table, and it would build a nifty set of
    basic pages to do admin stuff, namely view, add, edit and delete
    records. Very good start to build quick and dirty admin pages, and
    super easy.
    There was even a little built in Studio wizard that would
    generate record view/edit/delete pages. All just basic cfm, no
    cfc's.
    Anyhing? I've got to build some admin type pages here on a
    table with lots of fields and don't want to do it all from scratch.
    If I can't find anything, I may search my CD archives for an old
    version of Studio just to use RecordMaster! What do others use for
    fast creation of database record admin pages???
    -Jeff

    Not exactly what you are looking for, but take a look at
    reactor (
    http://www.alagad.com/go/products-and-projects/reactor-for-coldfusion).
    It will create a database abstration layer on-the-fly for simple
    CRUD operations. A similar solution would be Illudium PU-36 (
    http://cfcgenerator.riaforge.org/).
    Similar concept to reactor, but used for one-time
    generation.

  • Why does item in drop down address not delete when selected and right click on delete

    on version 14.1 - to delete an item in dropdown address box, told to put item in address line the right click and select delete - this clears address line but item remains in drop down box and does not go away -why does item not clear when returning to drop down to check on this
    system is XP and ff 14.1

    dud the maintenance add on link you noted - sorry to say problem is the same - when trying to delete an item in the drop down list, i put it in the address line then right click and click delete - it clears from address line but it does not clear from the drop down list ---- please define in detail how to get item cleared from address line to also clear from dropdown list - thank you for your patience - I would simply like to clean up and unclutter the dropdown list without deleting entire history ---thank you

  • My Yahoo and Norton toolbars were disabled when I updated today and they did not reset. They no longer appear in the drop down view menu. How do I reset them?

    I was asked to update my Firefox today. The prompts said the yahoo and norton toolbars would be disabled during the update and ENABLED after. They did not reset and do not appear in view drop down menu. How to I reset the toolbars? I am a novice user please be as simple as possible.

    Add-ons are Disabled after Updating Firefox
    * https://support.mozilla.com/en-US/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox
    Check and tell if its working.

  • DWT file not updating with drop-down menu edits rom Fireworks

    Aughh! I am almost done with my website, when I go back to
    Fireworks and add a couple new tabs on a drop-down menu. I update
    the DWT file in Dreamweaver, but one of two things happens: either
    the update simply doesn't "take", or all of the <body>
    section is mysteriously deleted from the DWT file. If I preview the
    Fireworks template (from Fireworks), everything is as it should be,
    but not when I preview in Dreamweaver. Not sure if this is a
    Fireworks issue or a Dreamweaver so I've posted in both. No one in
    the FIreworks forum has come up with any suggestions yet.
    What the hell?
    Thanks in advance for the help,
    Brian

    >so I've posted in both
    Can't see anything here over at the newsgroup - did you
    forget or not post
    in such a way it doesn't show?
    Please provide a URL.
    Jo
    "_Lost_Boy" <[email protected]> wrote in
    message
    news:ga4i6l$cht$[email protected]..
    > Aughh! I am almost done with my website, when I go back
    to Fireworks and
    > add a
    > couple new tabs on a drop-down menu. I update the DWT
    file in Dreamweaver,
    > but
    > one of two things happens: either the update simply
    doesn't "take", or all
    > of
    > the <body> section is mysteriously deleted from
    the DWT file. If I preview
    > the
    > Fireworks template (from Fireworks), everything is as it
    should be, but
    > not
    > when I preview in Dreamweaver. Not sure if this is a
    Fireworks issue or a
    > Dreamweaver so I've posted in both. No one in the
    FIreworks forum has
    > come up
    > with any suggestions yet.
    >
    > What the hell?
    >
    > Thanks in advance for the help,
    > Brian
    >

  • Customization of Connection Drop Down/View in SQL Developer

    I know this may not be that import feature that i think SQL Developer should have but will be very helpful.
    In my scenario there are many databases and schemas exists in Development/Staging/Production environments, there is a possibility when selecting a connection from drop down some other connection is selected, its human error. What if there is Group by option in the drop down so that we can customize or group lower environment connections in one place and others in different group, even color coding of critical connections settings could be much helpful.
    So in short i think it would be great if the following feature is included in next release of SQL Developer
    - Connections to display as in groups
    - Each group and connection of that group can be color coded(say production connections are displayed in Red color, Testing/Staging are displayed in Yellow, Development in Blue etc)

    JeffSmithSQLDevPM wrote:
    I think the poster means this actually
    You'll need to be more specific. The developer comment for the feature request you linked says this:
    Folders in the navigator are currently not persisted. Implementing this is not trivial.
    I have created 'prod' and 'test' folders and put connections in each of them in 3.0.02 Build MAIN-02.37 and the folders and connections persist just fine.
    So the connections themselves can certainly be 'grouped' which is what OP specifically asked about.
    What if there is Group by option in the drop down so that we can customize or group lower environment connections in one place and others in different group, even color coding of critical connections settings could be much helpful.
    Everything else in the tree (e.g. schemas) is specific to a connection which can be specific to a user created folder such as 'prod' or 'test'.
    So if OP means something else they will need to clarify what they really mean and provide an example.

  • Creating cascading drop down boxes in SharePoint 2010 using one list

    We have a support request form tied to a list that end users input data into which when submitted sends out an email.
    Is it possible to create a drop down box on the form that limits the choices in the "subcategory" column, based on what is chosen in the "category" column.  
    For instance in the category column we have SharePoint, Oracle, and Web Tools as choices. 
    In the subcategory column we have items related to each category. We only want items that are related to the selected choice to appear in the subcategory drop down box. 
    I see examples in InfoPath using "Multiple Lists" (one list for city, one for state, etc), but nothing using the same list.  I would rather not use multiple lists if possible. 
    Anyone have any ideas?  Thanks.

    Hi,
    According to your post, you want to create a cascading drop-down list box using one list.
    To achieve what you want, we can:
    Create two fields(category and subcategory) in drop-down list box type in the form in InfoPath.
    Add the list which contains the values of the category and subcategory columns to the form as an external data.
    Right click the category field, click Drop-Down List Box Properties, and choose Get choices from an external data source.
    Choose the list added in step2 in Data source, click XPath behind Entries, click the category column in the list, select Show only entries with unique display names.
    Right click the subcategory field, click Drop-Down List Box Properties, and choose Get choices from an external data source.
    Choose the list added in step2 in Data source, click XPath behind Entries, click the subcategory column in the list, then click Filter Data.
    Click Add, select the category column in the list in the first box, select is equal to in the second box, choose select  a field or group in the third box, then choose Main in the Fields and select the category field in the form.
    Click OK.
    Best regards.
    Thanks

  • I am trying to stop programs from opening automatically when I turn my computer on.  I tried system preferences users and groups login items...then I deleted them from the list but it did nothing.

    I am trying to stop programs from opening automatically when I turn my computer on.  I tried system preferences>users and groups>login items...then I deleted them itunes and emial from the list but it did nothing.  They continue to open up every time I turn on my Macbook Pro.

    Hi r,
    It sounds like you're running Lion?
    Have you tried running Verify and/or Repair Disk?
    Have you tried running Repair Permissions?
    Do you have at least 15% free space available on your HD?

  • Version 3.6.17 Horizontal drop down menu is displaying as vertical text list. Page style set to basic. Menu works fine in Internet Explorer. Any hints?

    Newly installed horizontal drop down menu works in IE. In Firefox, it displays as a vertical text list. Any hints?

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • How to influence APEX 4.0 autocomplete text item drop down list's colors?

    Hi,
    Could some body please point me to the template that I have to modify?
    I am using theme 15 and the text item with auto complete has a very different color schema, that I would like to modify, so that it would harmonize with Theme 15 colors. It's just that I can not seem to find the template to modify. TIA.
    Tamás

    Tamas
    There's no template for the autocomplete item. It's appearance is controlled entirely using CSS. Theme 15 does not include themed styling for autocomplete items: it falls back to a generic scheme specified in the <tt>apex_4_0.css</tt> style sheet:
    .ac_results {
      padding: 0;
      border: 1px solid black;
      background-color: white;
      overflow: hidden;
      z-index: 99999;
    .ac_results ul {
      width: 100%;
      list-style-position: outside;
      list-style: none;
      padding: 0;
      margin: 0;
    .ac_results li {
      margin: 0;
      padding: 2px 5px;
      cursor: default;
      display: block;
      font: menu;
      font-size: 12px;
      line-height: 16px;
      overflow: hidden;
    .ac_results li {
      margin: 0;
      padding: 2px 5px;
      cursor: default;
      display: block;
      font: menu;
      font-size: 12px;
      line-height: 16px;
      overflow: hidden;
    .ac_loading {
      background: white url('indicator.gif') right center no-repeat;
    .ac_odd {
      background-color: #eee;
    .ac_over {
      background-color: #0A246A;
      color: white;
    }The best approach would be to use a web inspector tool to identify what each of these rules does in the context of using the autocomplete item and create your own theme-15-friendly style sheet to override this subset of <tt>apex_4_0.css</tt>.

Maybe you are looking for