Single Node RAC on 11.2.0.3
Hi All,
i have implemented Rac One node with two machine(dbtest01,dbtest02) in 11.2.0.3 Redhat 5.3 one for online another one for offline. i have created TAF also.
dbtest01 is online and created one query
DECLARE
i number(36):=1;
begin
while(i<10000000)
loop
dbms_output.put_line(i);
i:=i+1;
end loop;
end;
i executed above query for test and i made relocate database using srvctl utility to dbtest02 machine.
session is relocated successfully with new session id...
above query getting stop in 25000 itself.
i want to make it continue that process...
also i tried to find Omotion utility in all the path.. couldn't find it... where will it be..
i want to relocate all the session without losing work.
from application i am getting disconnect after relocation.. application server need to restart to get work again...
Hi Friend
Point 1 : Omtion utility will not come with Oracle Binaries. We have to download the separate patch for that.
Patch is : p9004119_112010_<OS>
example : p9004119_112010_LINUX
To use Oracle RAC One Node Utilities, you must apply patch 9004119 to your 11.2.0.1 database home.
NOTE: You must have Oracle RAC software home on any node in the cluster where you could relocate (using Omotion) the Oracle RAC One Node instance or where it could failover to if the original node fails. You will be asked for this candidate list of nodes during the initialization of Oracle RAC One Node.
Solution is :
*1. Download the above patch*
*2. Download the this document - "ug_raconenode-2009.pdf" (Step By St*ep Document)
Thanks
LaserSoft
Similar Messages
-
Oracle Single Node RAC - Oralce Clusterware Install
Hi
I want to install Oracle Clusterware to perform Active / Passive failiver for a 2 node cluster
I plan to use Oracle Single Node RAC for this and have Oracle Clusterware control the active passive failover.
However - I do not want to use ASM in any of my set-up.
We have a NetApp filer and are using NFS / NetApp technologies to control backups (Oracle snap manager).
Is this possible?
All the documents I have include reference to ASM
If I try and install Grid - I am also asked for ASM information.
I find ASM an un-necessary overhead given the storage we have and do want to use it,
Can anyone help?Hi,
no you don't need ASM to have RAC One Node. OCR and Voting disk can be on NFS, simply use Shared Disk location during installation, and you won't get asked about ASM.
http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDECEBGH
Especially http://docs.oracle.com/cd/E11882_01/install.112/e22489/storage.htm#CDEDAHGB
What you should use in conjunction with NFS however is dNFS.
Regards
Sebastian -
9ir2 Single Node RAC + RH80
Hi all.
I'm triying to install a single node RAC based in the single node rac for linux document in the metalink.
The document was made based in a oracle 9iR1 database an RH71, I have followed the steps and i have a working kernel made by my own, the raw devices, and softdog hacked for being testing only. But the service does not go up.
I don't know if someone have made a single node rac instalation and can help me to choose the right pieces.
I don't have a RHAS2.1 but I do have a UnitedLinux 1.0 Server Patched.
I want to try the RAC tech but here (ecuador-sudamerica) is dificult to find firewire cards and disks so I´m working around a single node instalation.
Any help will be apreciate.
FernandoHi
Database version and GI versions are 11.2.0.2.2. And these are not multinode RAC configuration at any given time only single instance will be there for any given database. Some thing like ACTIVE and PASSIVE in hardware clusters such are VCS (Veritas Clusters).
I agree with you failover sinario in multi node (2 or more) RAC environments. In single node clustering only one instance will be there, like services in multinode, here whole instance will be re created on available nodes.
Hi
Database version and GI versions are 11.2.0.2.2. And these are not multi node RAC configuration at any given time only single instance will be there for any given database. Some thing like ACTIVE and PASSIVE in hardware clusters such are VCS (VERITAS Clusters).
I agree with you failover scenario in multi node (2 or more) RAC environments. In single node clustering only one instance will be there, like services in multi node, here whole instance will be re created on available nodes.
Thanks,
Thanks, -
Error - convert single node-RAC-ConvertTomydb.xml -
my single node init.ora file:
# Copyright (c) 1991, 2001, 2002 by Oracle Corporation
# Cache and I/O
db_block_size=8192
db_file_multiblock_read_count=16
# Cursors and Library Cache
open_cursors=300
# Database Identification
db_domain=""
db_name=mydb
# Diagnostics and Statistics
background_dump_dest=/u01/app/oracle/admin/mydb/bdump
core_dump_dest=/u01/app/oracle/admin/mydb/cdump
user_dump_dest=/u01/app/oracle/admin/mydb/udump
# File Configuration
control_files=("/u01/app/oracle/oradata/mydb/control01.ctl", "/u01/app/oracle/oradata/mydb/control02.ctl", "/u01/app/oracle/oradata/mydb/control03.ctl")
# Job Queues
job_queue_processes=10
# Miscellaneous
compatible=10.2.0.1.0
# Processes and Sessions
processes=150
# SGA Memory
sga_target=1083179008
# Security and Auditing
audit_file_dest=/u01/app/oracle/admin/mydb/adump
remote_login_passwordfile=EXCLUSIVE
# Shared Server
dispatchers="(PROTOCOL=TCP) (SERVICE=mydbXDB)"
# Sort, Hash Joins, Bitmap Indexes
pga_aggregate_target=360710144
# System Managed Undo and Rollback Segments
undo_management=AUTO
undo_tablespace=UNDOTBS1
my ConvertTomydb.xml ------------which is copy of ConvertToRAC.xml file
<?xml version="1.0" encoding="UTF-8" ?>
- <n:RConfig xmlns:n="http://www.oracle.com/rconfig" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/rconfig">
- <n:ConvertToRAC>
- <!-- Verify does a precheck to ensure all pre-requisites are met, before the conversion is attempted. Allowable values are: YES|NO|ONLY
-->
- <n:Convert verify="ONLY">
- <!-- Specify current OracleHome of non-rac database for SourceDBHome
-->
<n:SourceDBHome>/u01/app/oracle/product/10.2.0/db_1</n:SourceDBHome>
- <!-- Specify OracleHome where the rac database should be configured. It can be same as SourceDBHome
-->
<n:TargetDBHome>/u01/app/oracle/product/10.2.0/db_1</n:TargetDBHome>
- <!-- Specify SID of non-rac database and credential. User with sysdba role is required to perform conversion
-->
- <n:SourceDBInfo SID="mydb">
- <n:Credentials>
<n:User>sys</n:User>
<n:Password>oracle</n:Password>
<n:Role>sysdba</n:Role>
</n:Credentials>
</n:SourceDBInfo>
- <!-- ASMInfo element is required only if the current non-rac database uses ASM Storage
-->
- <n:ASMInfo SID="+ASM1">
- <n:Credentials>
<n:User>sys</n:User>
<n:Password>oracle</n:Password>
<n:Role>sysdba</n:Role>
</n:Credentials>
</n:ASMInfo>
- <!-- Specify the list of nodes that should have rac instances running. LocalNode should be the first node in this nodelist.
-->
- <n:NodeList>
<n:Node name="linux1" />
<n:Node name="linux2" />
</n:NodeList>
- <!-- Specify prefix for rac instances. It can be same as the instance name for non-rac database or different. The instance number will be attached to this prefix.
-->
<n:InstancePrefix>mydb</n:InstancePrefix>
- <!-- Specify port for the listener to be configured for rac database.If port="", alistener existing on localhost will be used for rac database.The listener will be extended to all nodes in the nodelist
-->
<n:Listener port="1521" />
- <!-- Specify the type of storage to be used by rac database. Allowable values are CFS|ASM. The non-rac database should have same storage type.
-->
- <n:SharedStorage type="ASM">
- <!-- Specify Database Area Location to be configured for rac database.If this field is left empty, current storage will be used for rac database. For CFS, this field will have directory path.
-->
<n:TargetDatabaseArea>+ORCL_DATA1</n:TargetDatabaseArea>
- <!-- Specify Flash Recovery Area to be configured for rac database. If this field is left empty, current recovery area of non-rac database will be configured for rac database. If current database is not using recovery Area, the resulting rac database will not have a recovery area.
-->
<n:TargetFlashRecoveryArea>+FLASH_RECOVERY_AREA</n:TargetFlashRecoveryArea>
</n:SharedStorage>
</n:Convert>
</n:ConvertToRAC>
</n:RConfig>
Ran the xml file
$ rconfig ConvertTomydb.xml
Got this below error.
[oracle@linux1 bin]$ sh rconfig ConvertTomydb.xml
<?xml version="1.0" ?>
<RConfig>
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
Clusterware is not configured
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC></RConfig>
[oracle@linux1 bin]$
Log file from /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/rconfig/rconfig.log
[main] [0:14:4:4] [RuntimeExec.runCommand:175] Returning from RunTimeExec.runCommand
oracle.ops.mgmt.cluster.RemoteShellException: PRKC-1044 : Failed to check remote command execution setup for node linux2 using shells /usr/bin/ssh and /usr/bin/rsh
linux2.com: Connection refused
at oracle.ops.mgmt.nativesystem.UnixSystem.checkRemoteExecutionSetup(UnixSystem.java:1880)
at oracle.ops.mgmt.nativesystem.UnixSystem.getRemoteShellCmd(UnixSystem.java:1634)
at oracle.ops.mgmt.nativesystem.UnixSystem.createCommand(UnixSystem.java:614)
at oracle.ops.mgmt.nativesystem.UnixSystem.removeFile(UnixSystem.java:622)
at oracle.ops.mgmt.nativesystem.UnixSystem.isSharedPath(UnixSystem.java:1352)
at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:916)
at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:859)
at oracle.sysman.assistants.util.ClusterUtils.areSharedPaths(ClusterUtils.java:570)
at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:501)
at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:457)
at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.updateShared(CommonOPSAttributes.java:724)
at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.setNodeNames(CommonOPSAttributes.java:207)
at oracle.sysman.assistants.rconfig.engine.Context.<init>(Context.java:54)
at oracle.sysman.assistants.rconfig.engine.ASMInstance.createUtilASMInstanceRAC(ASMInstance.java:109)
at oracle.sysman.assistants.rconfig.engine.Step.execute(Step.java:245)
at oracle.sysman.assistants.rconfig.engine.Request.execute(Request.java:73)
at oracle.sysman.assistants.rconfig.engine.RConfigEngine.execute(RConfigEngine.java:65)
at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:85)
at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:51)
at oracle.sysman.assistants.rconfig.RConfig.main(RConfig.java:130)
[main] [0:14:4:16] [UnixSystem.isSharedPath:1356] UnixSystem.isShared: creating file /u01/app/oracle/product/10.2.0/db_1/CFSFileName126249561289258204.tmp
[main] [0:14:4:17] [UnixSystem.checkRemoteExecutionSetup:1817] checkRemoteExecutionSetup:: Checking user equivalence using Secured Shell '/usr/bin/ssh'
[main] [0:14:4:17] [UnixSystem.checkRemoteExecutionSetup:1819] checkRemoteExecutionSetup:: Running Unix command: /usr/bin/ssh -o FallBackToRsh=no -o PasswordAuthentication=no -o StrictHostKeyChecking=yes -o NumberOfPasswordPrompts=0 linux2 /bin/true
oracle.ops.mgmt.cluster.SharedDeviceException: PRKC-1044 : Failed to check remote command execution setup for node linux2 using shells /usr/bin/ssh and /usr/bin/rsh
linux2.com: Connection refused
at oracle.ops.mgmt.nativesystem.UnixSystem.testCFSFile(UnixSystem.java:1444)
at oracle.ops.mgmt.nativesystem.UnixSystem.isSharedPath(UnixSystem.java:1402)
at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:916)
at oracle.ops.mgmt.cluster.Cluster.isSharedPath(Cluster.java:859)
at oracle.sysman.assistants.util.ClusterUtils.areSharedPaths(ClusterUtils.java:570)
at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:501)
at oracle.sysman.assistants.util.ClusterUtils.isShared(ClusterUtils.java:457)
at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.updateShared(CommonOPSAttributes.java:724)
at oracle.sysman.assistants.util.attributes.CommonOPSAttributes.setNodeNames(CommonOPSAttributes.java:207)
at oracle.sysman.assistants.rconfig.engine.Context.<init>(Context.java:54)
at oracle.sysman.assistants.rconfig.engine.ASMInstance.createUtilASMInstanceRAC(ASMInstance.java:109)
at oracle.sysman.assistants.rconfig.engine.Step.execute(Step.java:245)
at oracle.sysman.assistants.rconfig.engine.Request.execute(Request.java:73)
at oracle.sysman.assistants.rconfig.engine.RConfigEngine.execute(RConfigEngine.java:65)
at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:85)
at oracle.sysman.assistants.rconfig.RConfig.<init>(RConfig.java:51)
at oracle.sysman.assistants.rconfig.RConfig.main(RConfig.java:130)
[main] [0:14:35:152] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [0:14:35:152] [UnixSystem.getCSSConfigType:1985] configFile=/etc/oracle/ocr.loc
[main] [0:14:35:157] [Utils.getPropertyValue:221] keyName=ocrconfig_loc props.val=/u02/oradata/orcl/OCRFile propValue=/u02/oradata/orcl/OCRFile
[main] [0:14:35:157] [Utils.getPropertyValue:221] keyName=ocrmirrorconfig_loc props.val=/u02/oradata/orcl/OCRFile_mirror propValue=/u02/oradata/orcl/OCRFile_mirror
[main] [0:14:35:157] [Utils.getPropertyValue:292] propName=local_only propValue=FALSE
[main] [0:14:35:157] [UnixSystem.getCSSConfigType:2029] configType=false
[main] [0:14:35:158] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [0:14:35:168] [OCRTree.init:201] calling OCRTree.init
[main] [0:14:35:169] [Version.isPre10i:189] isPre10i.java: Returning FALSE
[main] [0:14:35:177] [OCRTree.<init>:157] calling OCR.init at level 7
[main] [0:14:35:177] [HASContext.getInstance:190] Module init : 24
[main] [0:14:35:177] [HASContext.getInstance:214] Local Module init : 0
[main] [0:14:35:177] [HASContext.getInstance:249] HAS Context Allocated: 4 to oracle.ops.mgmt.has.ClusterLock@f47bf5
[main] [0:14:35:177] [ClusterLock.<init>:60] ClusterLock Instance created.
[main] [0:14:35:178] [OCR.getKeyValue:411] OCR.getKeyValue(SYSTEM.local_only)
[main] [0:14:35:178] [nativesystem.OCRNative.Native] getKeyValue: procr_open_key retval = 0
[main] [0:14:35:179] [nativesystem.OCRNative.Native] getKeyValue: procr_get_value retval = 0, size = 6
[main] [0:14:35:179] [nativesystem.OCRNative.Native] getKeyValue: value is [false] dtype = 3
[main] [0:14:35:179] [OCRTreeHA.getLocalOnlyKeyValue:1697] OCRTreeHA localOnly string = false
[main] [0:14:35:180] [HASContext.getInstance:190] Module init : 6
[main] [0:14:35:180] [HASContext.getInstance:214] Local Module init : 0
[main] [0:14:35:180] [HASContext.getInstance:249] HAS Context Allocated: 5 to oracle.ops.mgmt.has.Util@f6438d
[main] [0:14:35:180] [Util.<init>:86] Util Instance created.
[main] [0:14:35:180] [has.UtilNative.Native] prsr_trace: Native: hasHAPrivilege
[main] [0:14:35:184] [HASContext.getInstance:190] Module init : 56
[main] [0:14:35:184] [HASContext.getInstance:214] Local Module init : 32
[main] [0:14:35:184] [has.HASContextNative.Native] prsr_trace: Native: allocHASContext
[main] [0:14:35:184] [has.HASContextNative.Native]
allocHASContext: Came in
[main] [0:14:35:184] [has.HASContextNative.Native] prsr_trace: Native: prsr_initCLSR
[main] [0:14:35:185] [has.HASContextNative.Native]
allocHASContext: CLSR context [1]
[main] [0:14:35:185] [has.HASContextNative.Native]
allocHASContext: retval [1]
[main] [0:14:35:185] [HASContext.getInstance:249] HAS Context Allocated: 6 to oracle.ops.mgmt.has.ClusterAlias@18825b3
[main] [0:14:35:185] [ClusterAlias.<init>:85] ClusterAlias Instance created.
[main] [0:14:35:185] [has.UtilNative.Native] prsr_trace: Native: getCRSHome
[main] [0:14:35:186] [has.UtilNative.Native] prsr_trace: Native: getCRSHome crs_home=/u01/app/oracle/product/10.2.0/crs(**)
[main] [0:14:35:280] [ASMTree.getASMInstanceOracleHome:1328] DATABASE.ASM.linux1.+asm1 does exist
[main] [0:14:35:280] [ASMTree.getASMInstanceOracleHome:1329] Acquiring shared CSS lock SRVM.ASM.DATABASE.ASM.linux1.+asm1
[main] [0:14:35:280] [has.ClusterLockNative.Native] prsr_trace: Native: acquireShared
[main] [0:14:35:281] [OCR.getKeyValue:411] OCR.getKeyValue(DATABASE.ASM.linux1.+asm1.ORACLE_HOME)
[main] [0:14:35:281] [nativesystem.OCRNative.Native] getKeyValue: procr_open_key retval = 0
[main] [0:14:35:282] [nativesystem.OCRNative.Native] getKeyValue: procr_get_value retval = 0, size = 36
[main] [0:14:35:282] [nativesystem.OCRNative.Native] getKeyValue: value is [u01/app/oracle/product/10.2.0/db_1] dtype = 3
[main] [0:14:35:282] [ASMTree.getASMInstanceOracleHome:1346] getASMInstanceOracleHome:ohome=/u01/app/oracle/product/10.2.0/db_1
[main] [0:14:35:282] [ASMTree.getASMInstanceOracleHome:1367] Releasing shared CSS lock SRVM.ASM.DATABASE.ASM.linux1.+asm1
[main] [0:14:35:282] [has.ClusterLockNative.Native] prsr_trace: Native: unlock
[main] [0:14:35:802] [nativesystem.OCRNative.Native] keyExists: procr_close_key retval = 0
[main] [0:14:35:802] [ASMTree.getNodes:1236] DATABASE.ASM does exist
[main] [0:14:35:802] [ASMTree.getNodes:1237] Acquiring shared CSS lock SRVM.ASM.DATABASE.ASM
[main] [0:14:35:802] [has.ClusterLockNative.Native] prsr_trace: Native: acquireShared
[main] [0:14:35:803] [OCR.listSubKeys:615] OCR.listSubKeys(DATABASE.ASM)
[main] [0:14:35:803] [nativesystem.OCRNative.Native] listSubKeys: key_name=[DATABASE.ASM]
[main] [0:14:35:809] [GetASMNodeListOperation.run:78] Got nodes=[Ljava.lang.String;@11a75a2
[main] [0:14:35:809] [GetASMNodeListOperation.run:91] result status 0
[main] [0:14:35:809] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[main] [0:14:35:810] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM2, diskGroupName=FLASH_RECOVERY_AREA, size=95378, freeSize=88454, type=EXTERN, state=MOUNTED
[main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM1, diskGroupName=FLASH_RECOVERY_AREA, size=95378, freeSize=88454, type=EXTERN, state=MOUNTED
[main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM2, diskGroupName=ORCL_DATA1, size=95384, freeSize=39480, type=NORMAL, state=MOUNTED
[main] [0:14:35:811] [ASMInstanceRAC.loadDiskGroups:2260] diskgroup: instName=+ASM1, diskGroupName=ORCL_DATA1, size=95384, freeSize=39480, type=NORMAL, state=MOUNTED
[main] [0:14:35:858] [ASMInstance.setBestDiskGroup:1422] sql to be executed:=select name from v$asm_diskgroup where free_mb= (select max(free_mb) from v$asm_diskgroup)
[main] [0:14:35:864] [ASMInstance.setBestDiskGroup:1426] Setting best diskgroup....
[main] [0:14:35:888] [SQLEngine.doSQLSubstitution:2165] The substituted sql statement:=select t1.name from v$asm_template t1, v$asm_diskgroup t2 where t1.group_number=t2.group_number and t2.name='FLASH_RECOVERY_AREA'
[main] [0:14:35:888] [ASMInstance.setTemplates:1345] sql to be executed:=select t1.name from v$asm_template t1, v$asm_diskgroup t2 where t1.group_number=t2.group_number and t2.name='FLASH_RECOVERY_AREA'
[main] [0:14:35:892] [ASMInstance.setTemplates:1349] Getting templates for diskgroup: oracle.sysman.assistants.util.asm.DiskGroup@170888e
[main] [0:14:35:892] [ASMInstance.setTemplates:1357] template: PARAMETERFILE
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: DUMPSET
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: DATAGUARDCONFIG
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: FLASHBACK
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: CHANGETRACKING
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: XTRANSPORT
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: AUTOBACKUP
[main] [0:14:35:893] [ASMInstance.setTemplates:1357] template: BACKUPSET
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: TEMPFILE
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: DATAFILE
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: ONLINELOG
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: ARCHIVELOG
[main] [0:14:35:894] [ASMInstance.setTemplates:1357] template: CONTROLFILE
[main] [0:14:35:894] [ASMInstance.createUtilASMInstanceRAC:113] Diskgroups loaded
[main] [0:14:35:894] [LocalNodeCheck.checkLocalNode:107] Performing LocalNodeCheck
[main] [0:14:35:894] [OracleHome.getNodeNames:270] inside getNodeNames
[main] [0:14:36:116] [OracleHome.isClusterInstalled:252] bClusterInstalled=false
[main] [0:14:36:120] [Step.execute:251] STEP Result=Clusterware is not configured
[main] [0:14:36:121] [Step.execute:280] Returning result:Operation Failed
[main] [0:14:36:121] [RConfigEngine.execute:67] bAsyncJob=false
[main] [0:14:36:124] [RConfigEngine.execute:76] Result=<?xml version="1.0" ?>
<RConfig>
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
Clusterware is not configured
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC></RConfig>
Log file from /u01/app/oracle/product/10.2.0/db_1/cfgtoollogs/rconfig/mydb/sqllog
MYDB mydb 2622254467
10.2.0.1.0 ACTIVE
cluster_database FALSE
undo_management AUTO
db_domain
dispatchers (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest /u01/app/oracle/admin/mydb/bdump
user_dump_dest /u01/app/oracle/admin/mydb/udump
core_dump_dest /u01/app/oracle/admin/mydb/cdump
audit_file_dest /u01/app/oracle/admin/mydb/adump
MYDB mydb 2622254467
10.2.0.1.0 ACTIVE
cluster_database FALSE
undo_management AUTO
db_domain
dispatchers (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest /u01/app/oracle/admin/mydb/bdump
user_dump_dest /u01/app/oracle/admin/mydb/udump
core_dump_dest /u01/app/oracle/admin/mydb/cdump
audit_file_dest /u01/app/oracle/admin/mydb/adump
MYDB mydb 2622254467
10.2.0.1.0 ACTIVE
cluster_database TRUE
undo_management AUTO
db_domain
dispatchers (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest /u01/app/oracle/admin/mydb/bdump
user_dump_dest /u01/app/oracle/admin/mydb/udump
core_dump_dest /u01/app/oracle/admin/mydb/cdump
audit_file_dest /u01/app/oracle/admin/mydb/adump
MYDB mydb 2622254467
10.2.0.1.0 ACTIVE
cluster_database TRUE
undo_management AUTO
db_domain
dispatchers (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest /u01/app/oracle/admin/mydb/bdump
user_dump_dest /u01/app/oracle/admin/mydb/udump
core_dump_dest /u01/app/oracle/admin/mydb/cdump
audit_file_dest /u01/app/oracle/admin/mydb/adump
MYDB mydb 2622254467
10.2.0.1.0 ACTIVE
cluster_database TRUE
undo_management AUTO
db_domain
dispatchers (PROTOCOL=TCP) (SERVICE=mydbXDB)
background_dump_dest /u01/app/oracle/admin/mydb/bdump
user_dump_dest /u01/app/oracle/admin/mydb/udump
core_dump_dest /u01/app/oracle/admin/mydb/cdump
audit_file_dest /u01/app/oracle/admin/mydb/adump
Please help me where I am making mistake.
Thanks1) I have created single node standard database called mydb in /u01/app/oracle/product/10.2.0/db_1 home (hostname linux1)
2) installed crs and asm on linux1 and linux2 and shared storag on ASM(which external HD running ieee1294 cards and ports) . no database is created on linux1 or linux2
3) I want to convert mydb to RAC DATABASE called mydb1 instance on linux1 and mydb2 on linux2 machine respectively.
4) copied and modifed xml as you see above called ConvertTomydb.xml to $ORACLE_HOME/bin directory
5) when I run
$rconfig ConvertTomydb.xml from $ORACLE_HOME/bin directory , i get the following error
<ConvertToRAC>
<Convert>
<Response>
<Result code="1" >
Operation Failed
</Result>
<ErrorDetails>
Clusterware is not configured
</ErrorDetails>
</Response>
</Convert>
</ConvertToRAC>
$
Please see my crs_stat -t command output
Name Type Target State Host
ora....SM1.asm application ONLINE ONLINE linux1
ora....X1.lsnr application ONLINE ONLINE linux1
ora.linux1.gsd application ONLINE ONLINE linux1
ora.linux1.ons application ONLINE ONLINE linux1
ora.linux1.vip application ONLINE ONLINE linux1
ora....SM2.asm application ONLINE ONLINE linux2
ora....X2.lsnr application ONLINE ONLINE linux2
ora.linux2.gsd application ONLINE ONLINE linux2
ora.linux2.ons application ONLINE ONLINE linux2
ora.linux2.vip application ONLINE ONLINE linux2
ora.orcl.db application ONLINE ONLINE linux1
ora....l1.inst application ONLINE ONLINE linux1
ora....l2.inst application ONLINE ONLINE linux2
ora....test.cs application ONLINE ONLINE linux1
ora....cl1.srv application ONLINE ONLINE linux1
ora....cl2.srv application ONLINE UNKNOWN linux2
please see the output from olsnodes command
[oracle@linux1 bin]$ olsnodes
linux1
linux2
[oracle@linux1 bin]$
What is your cache fusion interconnect strategy?
I don't about this, please let me know where can i find the answers. what kind of command do i have to use get the answer
damorgan , Please let me know, if I gave answers to your questions. if not please let me know, i can give as much as possible. i really appreciate for your help
Thanks -
Can any explain how to install a RAC in a single server? i am not sure it is possible or not, So thats why i came hear to gain knowledge from experts
thanks,
VasanthORACLE-BASE - Oracle Database 11g Release 2 RAC On Linux Using VMware Server 2
This link may help you.
CSM -
Install a grid infrastructure for a cluster for single node Windows Server
Hello,
Can you suggest me how to install a Oracle Single Node RAC 11g on a Windows Server 2008 x64 bits? It's for testing purposes and I don't need two nodes. I know that Linux is better, but my company only uses Windows servers. Our former consultant was able to do it, but didn't tell us how to and that server was lost.
I know that we have to install first Grid Infrastructure. Running the "Oracle Grid Infrastructure" installer, I could successfully install a "Grid Infrastructure for a Standalone Server". But that grid is not for a RAC database. When trying to install the Database software, it allowed to me to only install "Single instance database", not "Real Application Cluster database installation".
Running the "Oracle Grid Infrastructure" installer, I tried to select option:
"Install and Configure Grid Infrastructure for a Cluster" -> Typical Installation:
SCAN Name: SRVORAC-cluster
Validating SCAN information
INS-40922 Invalid SCAN Name - unresolvable to IP address.
Is it possible to install a grid infrastructure for a cluster for a single-node or one-node Windows Server ?
Edited by: user521219 on Jan 30, 2012 12:46 PMHI,
You probably have misconception about Single node RAC. This feature does not need that you have only one physical machine in a RAC, it actually means that in a RAC environment (2 or more nodes), you can run your database on only one node(single instance) and then later you can move this single instance to any other node of the RAC (so that you can do some patching on this node making your database available all the time). This also has some other benefits, see bellow.
http://www.oracle.com/technetwork/database/clustering/overview/ug-raconenode-2009-130760.pdf
http://docs.oracle.com/cd/E11882_01/install.112/e25666/whatsnew.htm#sthref8
Salman -
How best to slice disk drives? Single Node install on a Sun V480 (2 cpu's @ 900mhz, 2 disk drives @ 36gb each), solaris operating system. For my test server I will install all 10g components. How best to distribute the 10g load (oraInventory, appserver, infrastructure, Metadata Repository) between the two disk drives?
Part of the installation involves the installer installing CRS software on the other nodes, creating the ASM and RAC instances and so on.
All this is done in an automated fashion - requiring each node to be prepped accordingly, ssh keys generated, public keys distributed and added to authorised keys and so on.
None of these installation steps (all critical) will be part of a "single node" RAC install.
In fact, the prepping part is even more critical and complex than the actual installation - if done properly the installation will be smooth and painless. If not... you will run into all kinds of problems. And this is often the case as one has to deal with getting the shared devices to be seen by all nodes, ensure consistent device mappings across all nodes, ensure that multipath (load balancing) I/O works, etc.
For this at least 2 nodes are required. For actual proper RAC testing itself, even 2 nodes do not suffice and at least 3 are needed.
IMO you are pretty much wasting your time as no real practical RAC installation lessons will be learned mucking about with RAC and a single VM. -
Hi
I am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit
I am following Oracle metalink document note id 466649.1 . My 11.2.0.3 clusterware is already setup correctly and working fine as per document E24614-03.
However I am currently stuck in section 3.3:Configure TNS listener (Doc id : 466649.1) . The netca is unable to start the listener and failing with error as below.
However when I start the same locally from lsnrctl command listener starts.
trace_OraDb11g_home1-1212159AM174.log
====================================
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:144] runCommand: process returns 123
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:161] RunTimeExec: output>
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:887] [RuntimeExec.runCommand:164] Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr`
on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on member
`jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:164] CRS-2632: There are no more servers to try to place resource 'ora.jxn-ux-e
bs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:888] [RuntimeExec.runCommand:170] RunTimeExec: error>
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173] CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr'
has placement error.
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:173]
[AWT-EventQueue-0] [18:34:31:889] [RuntimeExec.runCommand:192] Returning from RunTimeExec.runCommand
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1221] signed exit value = 123
[AWT-EventQueue-0] [18:34:31:890] [HAOperationImpl.runCommand:1258] set status HA_RES_RELOCATE_ERR
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:84] Returned from executing the HA Operation
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to start `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q
.lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Start of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on m
ember `jxn-ux-ebs1d1q` failed.
[AWT-EventQueue-0] [18:34:31:891] [HAStartOperation.run:89] OUTPUT> Attempting to stop `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.
lsnr` on member `jxn-ux-ebs1d1q`
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> Stop of `ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr` on me
mber `jxn-ux-ebs1d1q` succeeded.
[AWT-EventQueue-0] [18:34:31:892] [HAStartOperation.run:89] OUTPUT> CRS-2632: There are no more servers to try to place resource 'ora.jxn
-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy
[AWT-EventQueue-0] [18:34:31:893] [HAStartOperation.run:95] ERROR> CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.l
snr' has placement error.
[AWT-EventQueue-0] [18:34:31:893] [LocalCommand.execute:56] LocalCommand.execute: Returned from run method
[AWT-EventQueue-0] [18:34:31:893] [HAOperationResult.getOutputAll:114] outLine is [CRS-2632: There are no more servers to try to place re
source 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr' on that would satisfy its placement policy]
[AWT-EventQueue-0] [18:34:31:894] [HAOperationResult.getOutputAll:115] errLine is [CRS-0223: Resource 'ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_
JXN-UX-EBS1D1Q.lsnr' has placement error.]
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getNodeNameIndex:-1] getNodeNameIndex: Matching LISTENER_EBSQA_JXN-UX-EBS1D1Q
[AWT-EventQueue-0] [18:36:39:994] [ca.ConfigureListenerOPS.getListenerRootName:-1] ListenerName is LISTENER_EBSQA
The crsctl has details as below:
=====================
NAME TARGET STATE SERVER STATE_DETAILS
Cluster Resources
ora.LISTENER_SCAN1.lsnr
1 ONLINE ONLINE jxn-ux-ebs2d1q
ora.LISTENER_SCAN2.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.LISTENER_SCAN3.lsnr
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.cvu
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs1d1q.LISTENER_EBSQA_JXN-UX-EBS1D1Q.lsnr
1 ONLINE OFFLINE
ora.jxn-ux-ebs1d1q.vip
1 ONLINE ONLINE jxn-ux-ebs1d1q
ora.jxn-ux-ebs2d1q.LISTENER_EBSQA_JXN-UX-EBS2D1Q.lsnr
1 ONLINE OFFLINE
Not sure how to fix this .
Regards
RamI am trying to convert a single node 11.1.0.7 database with EBS 12.1.3 version from single to 2-node RAC ASM on Oracle clusterware 11.2.0.3 on AIX 6.1 - 64 bit You don't need to create listeners, after installing 11203 cluster there will be LISTENER running from $GRID_HOME
along with SCAN_LISTENERS -
Hi We are in the process of converting single instance database(11gr2) supporting EBS 12.1.3 to 2 node RAC on RHEL. Which version of RHEL is better? if its 6.x then x?? The oracle document only says RHEL update 6.
thanks in advance.Hi,
Yes you can use any version but i recommend you to use 6.2
Also refer my post for RAC migration in EBS
Apps DBA Workshop: Using 11gR2 RAC with Oracle Applications R12.1.1
Hope this helps
thanks,
X A H E E R -
Single instance standby for 2-node RAC
Hi,
Oracle Version:11.2.0.1
Operating system:Linux
Here i am planing to create single instance standby for my 2-node RAC database.Here i am creating my single instance standby database on 1-node of my 2-node RAC DB.
1.) Do i need to configure any separate listener for my single instance standby in $ORACLE_HOME/network/admin in ORACLE user or need to change in Grid user login.
2.) Below is the error when i am duplicating my primary 2-Node RAC to single instance DB. And it is shutting down my auxiliary instance.
[oracle@rac1 ~]$ rman target / auxiliary sys/racdba123@stand
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Aug 28 13:32:29 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: RACDB (DBID=755897741)
connected to auxiliary database: RACDB (not mounted)
RMAN> duplicate database racdba to stand
2> ;
Starting Duplicate Db at 28-AUG-11
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=6 device type=DISK
contents of Memory Script:
sql clone "create spfile from memory";
executing Memory Script
sql statement: create spfile from memory
contents of Memory Script:
shutdown clone immediate;
startup clone nomount;
executing Memory Script
Oracle instance shut down
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 08/28/2011 13:33:55
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptorAlso find my listener services.
[oracle@rac1 ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 29-AUG-2011 10:56:24
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 18-AUG-2011 10:35:07
Uptime 11 days 0 hr. 21 min. 17 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/11.2.0/grid/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/rac1/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.8.123)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.8.127)(PORT=1521)))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Service "RACDB" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Service "RACDBXDB" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Service "stand" has 2 instance(s).
Instance "stand", status UNKNOWN, has 1 handler(s) for this service...
Instance "stand", status BLOCKED, has 1 handler(s) for this service...
Service "testdb" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Service "testdb1" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
The command completed successfully
[oracle@rac1 ~]$ lsnrctl services
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 29-AUG-2011 10:56:35
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
Services Summary...
Service "+ASM" has 1 instance(s).
Instance "+ASM1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "RACDB" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
Service "RACDBXDB" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: rac1.qfund.net, pid: 3975>
(ADDRESS=(PROTOCOL=tcp)(HOST=rac1.qfund.net)(PORT=43731))
Service "stand" has 2 instance(s).
Instance "stand", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Instance "stand", status BLOCKED, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:669 refused:0 state:ready
LOCAL SERVER
Service "testdb" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
Service "testdb1" has 1 instance(s).
Instance "RACDB1", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0 state:ready
LOCAL SERVER
The command completed successfully
[oracle@rac1 ~]$Tnsnames.ora file content.
RACDB =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = racdb-scan.qfund.net)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = RACDB)
#QFUNDRAC =
stand =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST= racdb-scan.qfund.net)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = stand)
(UR = A)
)Please help me how to solve this problem.
Thanks & Regards,
Poorna Prasad.SHi,
Please find the output from v$dataguard_status from primary and standby
Primary
SQL> select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARCH: LGWR is scheduled to archive destination LOG_ARCHIVE_DEST_2 after log swit
ch
ARCH: Beginning to archive thread 1 sequence 214 (4604093-4604095)
Error 12514 received logging on to the standby
ARCH: Error 12514 Creating archive log file to 'stand'
ARCH: Completed archiving thread 1 sequence 214 (4604093-4604095)
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
MESSAGE
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
MESSAGE
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
MESSAGE
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC2: Becoming the heartbeat ARCH
ARC7: Beginning to archive thread 1 sequence 215 (4604095-4604191)
ARC7: Completed archiving thread 1 sequence 215 (4604095-4604191)
ARC5: Beginning to archive thread 1 sequence 216 (4604191-4604471)
ARC5: Completed archiving thread 1 sequence 216 (4604191-4604471)
ARCt: Archival started
MESSAGE
ARC3: Beginning to archive thread 1 sequence 217 (4604471-4605358)
ARC3: Completed archiving thread 1 sequence 217 (4604471-4605358)
LNS: Standby redo logfile selected for thread 1 sequence 217 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 217
LNS: Completed archiving log 1 thread 1 sequence 217
LNS: Standby redo logfile selected for thread 1 sequence 218 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 218
MESSAGE
LNS: Completed archiving log 2 thread 1 sequence 218
ARC4: Beginning to archive thread 1 sequence 218 (4605358-4625984)
ARC4: Completed archiving thread 1 sequence 218 (4605358-4625984)
LNS: Standby redo logfile selected for thread 1 sequence 219 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 219
LNS: Completed archiving log 1 thread 1 sequence 219
ARC5: Beginning to archive thread 1 sequence 219 (4625984-4641358)
ARC5: Completed archiving thread 1 sequence 219 (4625984-4641358)
LNS: Standby redo logfile selected for thread 1 sequence 220 for destination LOG
MESSAGE
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 220
LNS: Completed archiving log 2 thread 1 sequence 220
ARC6: Beginning to archive thread 1 sequence 220 (4641358-4644757)
ARC6: Completed archiving thread 1 sequence 220 (4641358-4644757)
LNS: Standby redo logfile selected for thread 1 sequence 221 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 221
LNS: Completed archiving log 1 thread 1 sequence 221
MESSAGE
ARC7: Beginning to archive thread 1 sequence 221 (4644757-4648306)
ARC7: Completed archiving thread 1 sequence 221 (4644757-4648306)
LNS: Standby redo logfile selected for thread 1 sequence 222 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 222
LNS: Completed archiving log 2 thread 1 sequence 222
ARC8: Beginning to archive thread 1 sequence 222 (4648306-4655287)
ARC8: Completed archiving thread 1 sequence 222 (4648306-4655287)
LNS: Standby redo logfile selected for thread 1 sequence 223 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 223
LNS: Completed archiving log 1 thread 1 sequence 223
ARC9: Beginning to archive thread 1 sequence 223 (4655287-4655307)
ARC9: Completed archiving thread 1 sequence 223 (4655287-4655307)
LNS: Standby redo logfile selected for thread 1 sequence 224 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 224
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
MESSAGE
Error 3135 for archive log file 2 to 'stand'
LNS: Failed to archive log 2 thread 1 sequence 224 (3135)
ARC3: Beginning to archive thread 1 sequence 224 (4655307-4660812)
ARC3: Completed archiving thread 1 sequence 224 (4655307-4660812)
LNS: Standby redo logfile selected for thread 1 sequence 224 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 224
LNS: Completed archiving log 2 thread 1 sequence 224
LNS: Standby redo logfile selected for thread 1 sequence 225 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 225
LNS: Completed archiving log 1 thread 1 sequence 225
ARC4: Beginning to archive thread 1 sequence 225 (4660812-4660959)
ARC4: Completed archiving thread 1 sequence 225 (4660812-4660959)
LNS: Standby redo logfile selected for thread 1 sequence 226 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 226
LNS: Completed archiving log 2 thread 1 sequence 226
ARC5: Beginning to archive thread 1 sequence 226 (4660959-4664925)
MESSAGE
LNS: Standby redo logfile selected for thread 1 sequence 227 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 227
ARC5: Completed archiving thread 1 sequence 226 (4660959-4664925)
LNS: Completed archiving log 1 thread 1 sequence 227
LGWR: Error 1089 closing archivelog file 'stand'
ARC6: Beginning to archive thread 1 sequence 227 (4664925-4668448)
ARC6: Completed archiving thread 1 sequence 227 (4664925-4668448)
ARC5: Beginning to archive thread 1 sequence 228 (4668448-4670392)
ARC5: Completed archiving thread 1 sequence 228 (4668448-4670392)
MESSAGE
LNS: Standby redo logfile selected for thread 1 sequence 228 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 228
LNS: Completed archiving log 2 thread 1 sequence 228
ARC4: Standby redo logfile selected for thread 1 sequence 227 for destination LO
G_ARCHIVE_DEST_2
LNS: Standby redo logfile selected for thread 1 sequence 229 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 229
LNS: Completed archiving log 1 thread 1 sequence 229
ARC3: Beginning to archive thread 1 sequence 229 (4670392-4670659)
ARC3: Completed archiving thread 1 sequence 229 (4670392-4670659)
LNS: Standby redo logfile selected for thread 1 sequence 230 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 230
LNS: Completed archiving log 2 thread 1 sequence 230
ARC4: Beginning to archive thread 1 sequence 230 (4670659-4670679)
ARC4: Completed archiving thread 1 sequence 230 (4670659-4670679)
MESSAGE
LNS: Standby redo logfile selected for thread 1 sequence 231 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 231
LNS: Completed archiving log 1 thread 1 sequence 231
ARC5: Beginning to archive thread 1 sequence 231 (4670679-4690371)
ARC5: Completed archiving thread 1 sequence 231 (4670679-4690371)
LNS: Standby redo logfile selected for thread 1 sequence 232 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 232
MESSAGE
LNS: Completed archiving log 2 thread 1 sequence 232
ARC6: Beginning to archive thread 1 sequence 232 (4690371-4712566)
ARC6: Completed archiving thread 1 sequence 232 (4690371-4712566)
LNS: Standby redo logfile selected for thread 1 sequence 233 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 233
LNS: Completed archiving log 1 thread 1 sequence 233
ARC7: Beginning to archive thread 1 sequence 233 (4712566-4731626)
LNS: Standby redo logfile selected for thread 1 sequence 234 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 2 thread 1 sequence 234
ARC7: Completed archiving thread 1 sequence 233 (4712566-4731626)
LNS: Completed archiving log 2 thread 1 sequence 234
ARC8: Beginning to archive thread 1 sequence 234 (4731626-4753780)
LNS: Standby redo logfile selected for thread 1 sequence 235 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 235
ARC8: Completed archiving thread 1 sequence 234 (4731626-4753780)
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
MESSAGE
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error 3135 for archive log file 1 to 'stand'
LNS: Failed to archive log 1 thread 1 sequence 235 (3135)
ARC9: Beginning to archive thread 1 sequence 235 (4753780-4765626)
ARC9: Completed archiving thread 1 sequence 235 (4753780-4765626)
LNS: Standby redo logfile selected for thread 1 sequence 235 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 235
LNS: Completed archiving log 1 thread 1 sequence 235
LNS: Standby redo logfile selected for thread 1 sequence 236 for destination LOG
MESSAGE
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 236
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error 3135 for archive log file 2 to 'stand'
LNS: Failed to archive log 2 thread 1 sequence 236 (3135)
ARCa: Beginning to archive thread 1 sequence 236 (4765626-4768914)
ARCa: Completed archiving thread 1 sequence 236 (4765626-4768914)
LNS: Standby redo logfile selected for thread 1 sequence 236 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 2 thread 1 sequence 236
LNS: Completed archiving log 2 thread 1 sequence 236
LNS: Standby redo logfile selected for thread 1 sequence 237 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 237
LNS: Completed archiving log 1 thread 1 sequence 237
ARCb: Beginning to archive thread 1 sequence 237 (4768914-4770603)
ARCb: Completed archiving thread 1 sequence 237 (4768914-4770603)
LNS: Standby redo logfile selected for thread 1 sequence 238 for destination LOG
MESSAGE
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 238
LNS: Completed archiving log 2 thread 1 sequence 238
ARCc: Beginning to archive thread 1 sequence 238 (4770603-4770651)
ARCc: Completed archiving thread 1 sequence 238 (4770603-4770651)
LNS: Standby redo logfile selected for thread 1 sequence 239 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 239
LNS: Completed archiving log 1 thread 1 sequence 239
MESSAGE
ARCd: Beginning to archive thread 1 sequence 239 (4770651-4773918)
ARCd: Completed archiving thread 1 sequence 239 (4770651-4773918)
LNS: Standby redo logfile selected for thread 1 sequence 240 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 240
LNS: Completed archiving log 2 thread 1 sequence 240
ARCe: Beginning to archive thread 1 sequence 240 (4773918-4773976)
ARCe: Completed archiving thread 1 sequence 240 (4773918-4773976)
LNS: Standby redo logfile selected for thread 1 sequence 241 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 241
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Error 3135 for archive log file 1 to 'stand'
LNS: Failed to archive log 1 thread 1 sequence 241 (3135)
ARC3: Beginning to archive thread 1 sequence 241 (4773976-4774673)
ARC3: Completed archiving thread 1 sequence 241 (4773976-4774673)
LNS: Standby redo logfile selected for thread 1 sequence 241 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 241
LNS: Completed archiving log 1 thread 1 sequence 241
LNS: Standby redo logfile selected for thread 1 sequence 242 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 242
LNS: Completed archiving log 2 thread 1 sequence 242
ARC4: Beginning to archive thread 1 sequence 242 (4774673-4776045)
ARC4: Completed archiving thread 1 sequence 242 (4774673-4776045)
LNS: Standby redo logfile selected for thread 1 sequence 243 for destination LOG
_ARCHIVE_DEST_2
MESSAGE
LNS: Beginning to archive log 1 thread 1 sequence 243
LNS: Completed archiving log 1 thread 1 sequence 243
ARC5: Beginning to archive thread 1 sequence 243 (4776045-4776508)
ARC5: Completed archiving thread 1 sequence 243 (4776045-4776508)
LNS: Standby redo logfile selected for thread 1 sequence 244 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 244
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
MESSAGE
Error 3135 for archive log file 2 to 'stand'
LNS: Failed to archive log 2 thread 1 sequence 244 (3135)
ARC6: Beginning to archive thread 1 sequence 244 (4776508-4778741)
ARC6: Completed archiving thread 1 sequence 244 (4776508-4778741)
ARC7: Beginning to archive thread 1 sequence 245 (4778741-4778781)
ARC7: Completed archiving thread 1 sequence 245 (4778741-4778781)
ARC8: Beginning to archive thread 1 sequence 246 (4778781-4778787)
ARC8: Completed archiving thread 1 sequence 246 (4778781-4778787)
ARC9: Standby redo logfile selected for thread 1 sequence 244 for destination LO
G_ARCHIVE_DEST_2
MESSAGE
ARC3: Beginning to archive thread 1 sequence 247 (4778787-4778934)
LNS: Standby redo logfile selected for thread 1 sequence 247 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 247
ARC3: Completed archiving thread 1 sequence 247 (4778787-4778934)
LNS: Completed archiving log 1 thread 1 sequence 247
LNS: Standby redo logfile selected for thread 1 sequence 248 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 248
MESSAGE
ARC4: Beginning to archive thread 1 sequence 248 (4778934-4781018)
LNS: Completed archiving log 2 thread 1 sequence 248
ARC4: Completed archiving thread 1 sequence 248 (4778934-4781018)
LNS: Standby redo logfile selected for thread 1 sequence 249 for destination LOG
_ARCHIVE_DEST_2
LNS: Beginning to archive log 1 thread 1 sequence 249
LNS: Completed archiving log 1 thread 1 sequence 249
ARC5: Beginning to archive thread 1 sequence 249 (4781018-4781033)
ARC5: Completed archiving thread 1 sequence 249 (4781018-4781033)
LNS: Standby redo logfile selected for thread 1 sequence 250 for destination LOG
MESSAGE
_ARCHIVE_DEST_2
LNS: Beginning to archive log 2 thread 1 sequence 250
233 rows selected.
SQL>Standby
SQL> select message from v$dataguard_status;
MESSAGE
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCa: Archival started
MESSAGE
ARCb: Archival started
ARCc: Archival started
ARCd: Archival started
ARCe: Archival started
ARCf: Archival started
ARCg: Archival started
ARCh: Archival started
ARCi: Archival started
ARCj: Archival started
ARCk: Archival started
ARCl: Archival started
MESSAGE
ARCm: Archival started
ARCn: Archival started
ARCo: Archival started
ARCp: Archival started
ARCq: Archival started
ARCr: Archival started
ARCs: Archival started
ARC1: Becoming the 'no FAL' ARCH
ARC2: Becoming the heartbeat ARCH
Error 1017 received logging on to the standby
FAL[client, ARC2]: Error 16191 connecting to RACDB for fetching gap sequence
MESSAGE
ARCt: Archival started
Attempt to start background Managed Standby Recovery process
MRP0: Background Managed Standby Recovery process started
Managed Standby Recovery starting Real Time Apply
Media Recovery Log /u02/stand/archive/1_119_758280976.arc
Media Recovery Waiting for thread 2 sequence 183
RFS[1]: Assigned to RFS process 30110
RFS[1]: Identified database type as 'physical standby': Client is ARCH pid 25980
RFS[2]: Assigned to RFS process 30118
RFS[2]: Identified database type as 'physical standby': Client is ARCH pid 26008
RFS[3]: Assigned to RFS process 30124
MESSAGE
RFS[3]: Identified database type as 'physical standby': Client is ARCH pid 26029
RFS[4]: Assigned to RFS process 30130
RFS[4]: Identified database type as 'physical standby': Client is ARCH pid 26021
ARC4: Beginning to archive thread 1 sequence 244 (4776508-4778741)
ARC4: Completed archiving thread 1 sequence 244 (0-0)
RFS[5]: Assigned to RFS process 30144
RFS[5]: Identified database type as 'physical standby': Client is LGWR ASYNC pid
26128
Primary database is in MAXIMUM PERFORMANCE mode
ARC5: Beginning to archive thread 1 sequence 247 (4778787-4778934)
MESSAGE
ARC5: Completed archiving thread 1 sequence 247 (0-0)
ARC6: Beginning to archive thread 1 sequence 248 (4778934-4781018)
ARC6: Completed archiving thread 1 sequence 248 (0-0)
ARC7: Beginning to archive thread 1 sequence 249 (4781018-4781033)
ARC7: Completed archiving thread 1 sequence 249 (0-0)
58 rows selected.
SQL>also find the output for the primary alertlog file.
Tue Aug 30 10:45:41 2011
LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
Errors in file /u01/app/oracle/diag/rdbms/racdb/RACDB1/trace/RACDB1_nsa2_26128.trc:
ORA-03135: connection lost contact
Error 3135 for archive log file 2 to 'stand'
Errors in file /u01/app/oracle/diag/rdbms/racdb/RACDB1/trace/RACDB1_nsa2_26128.trc:
ORA-03135: connection lost contact
LNS: Failed to archive log 2 thread 1 sequence 244 (3135)
Errors in file /u01/app/oracle/diag/rdbms/racdb/RACDB1/trace/RACDB1_nsa2_26128.trc:
ORA-03135: connection lost contact
Tue Aug 30 10:50:25 2011
Thread 1 advanced to log sequence 245 (LGWR switch)
Current log# 1 seq# 245 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
Current log# 1 seq# 245 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
Tue Aug 30 10:50:25 2011
Archived Log entry 612 added for thread 1 sequence 244 ID 0x2d0e0689 dest 1:
Thread 1 cannot allocate new log, sequence 246
Checkpoint not complete
Current log# 1 seq# 245 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
Current log# 1 seq# 245 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
Thread 1 advanced to log sequence 246 (LGWR switch)
Current log# 2 seq# 246 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
Current log# 2 seq# 246 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
Tue Aug 30 10:50:27 2011
Archived Log entry 613 added for thread 1 sequence 245 ID 0x2d0e0689 dest 1:
Thread 1 cannot allocate new log, sequence 247
Checkpoint not complete
Current log# 2 seq# 246 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
Current log# 2 seq# 246 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
Thread 1 advanced to log sequence 247 (LGWR switch)
Current log# 1 seq# 247 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
Current log# 1 seq# 247 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
Tue Aug 30 10:50:30 2011
Archived Log entry 614 added for thread 1 sequence 246 ID 0x2d0e0689 dest 1:
Tue Aug 30 10:51:37 2011
ARC9: Standby redo logfile selected for thread 1 sequence 244 for destination LOG_ARCHIVE_DEST_2
Tue Aug 30 10:51:39 2011
Thread 1 advanced to log sequence 248 (LGWR switch)
Current log# 2 seq# 248 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
Current log# 2 seq# 248 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
Tue Aug 30 10:51:39 2011
Archived Log entry 620 added for thread 1 sequence 247 ID 0x2d0e0689 dest 1:
Tue Aug 30 10:51:39 2011
LNS: Standby redo logfile selected for thread 1 sequence 247 for destination LOG_ARCHIVE_DEST_2
LNS: Standby redo logfile selected for thread 1 sequence 248 for destination LOG_ARCHIVE_DEST_2
Tue Aug 30 11:08:27 2011
Thread 1 advanced to log sequence 249 (LGWR switch)
Current log# 1 seq# 249 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
Current log# 1 seq# 249 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
Tue Aug 30 11:08:27 2011
Archived Log entry 622 added for thread 1 sequence 248 ID 0x2d0e0689 dest 1:
Tue Aug 30 11:08:27 2011
LNS: Standby redo logfile selected for thread 1 sequence 249 for destination LOG_ARCHIVE_DEST_2
Thread 1 cannot allocate new log, sequence 250
Checkpoint not complete
Current log# 1 seq# 249 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
Current log# 1 seq# 249 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
Thread 1 advanced to log sequence 250 (LGWR switch)
Current log# 2 seq# 250 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
Current log# 2 seq# 250 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
Tue Aug 30 11:08:31 2011
Archived Log entry 624 added for thread 1 sequence 249 ID 0x2d0e0689 dest 1:
LNS: Standby redo logfile selected for thread 1 sequence 250 for destination LOG_ARCHIVE_DEST_2Thanks & Regards,
Poorna Prasad.S -
How to migrate DB from single node 10gR2 to RAC 11gR2 on diff platform?
How to migrate DB from single node 10gR2 to RAC 11gR2 on different platform with possible minimum downtime? We have a situation of upgrade/migrate oracle 10gR2 single instance DB to 2-node RAC 11gR. The source OS is Solaris 10 on SPARC and the target OS is Linux (the target servers could be changed to Solaris 11 x86 if needed). What is the best solution on that?
Thanks,Technically, can do the following for upgrading and migration?
1. Create 11gR2 oracle home on the same server and upgrade the database from 10gR2 to 11gR2 by running conversion (2 hour down time?)
2. Set up Heterogeneous Primary and Physical Standbys by RMAN. The standby is the RAC with ASM. No need down time. (from Solaris Space to Linux - this may be a problem)
3. At the cutoff time, activate the standby DB from the RAC ASM.
If feasible, do we have some detail guild line for each step? -
Migration from Single Node to RAC Node
Hi,
We are planning to migrate the Database from Single-Node to RAC Node. Are there any checklist list to be considered regarding Performance, System and Database ( or any other topic), before migrating to RAC.
ThanksIf it is already the same version, you will need to focus any "single-threadedness" of the application like sequences that are mandatory sequential, "semaphore-style" locking etc...
My experience is that going RAC and in particular to ASM can give a performance boost. If it is the same version (11gR2 for example) then any statistics-related performance issues will still be there. -
Single node file system to 3 node rac and asm migration
hi,
we have several utl_file and external table applications running on 10.2 single node veritas file system. and we want to migrate to 3 node RAC ASM environment. what is the best practices in order to succeed this migration during this migration. thanks.1. Patch to 10.2.0.3 or 10.2.0.4 if not already there.
2. Dump Veritas from any future consideration.
3. Build and validate the new RAC environment and then plug in your data using transportable tablespaces.
Do not expect the first part of step 3 to work perfectly the first time if you do not have experience building RAC clusters.
This means have appropriate hardware in place for perfecting your skills.
Be sure, too, that you are not trying to do this with blade or 1U servers. You need a minimum of 2U servers to be able
to plug in sufficient hardware to have redundant paths to storage and for cache fusion and public access (a minimum of 6 ports).
And don't let any network admin try to convince you that they can virtualize the network paths: They can not do so successfully
for RAC. -
Creating DR standby from RAC to single NODE
OS and Database versions Primary:
node1:- OEL 5.7
node2:- OEL 5.7
inst1:- prod1 Oracle 11.2.0.3
inst2:- prod2 Oracle 11.2.0.3
Standby:
OEL 5.7
Oracle 11.2.0.3
NOTE:- Creating Standby on Single node.
My scenario:
============
node1:- linuxdb1
node2:- linuxdb2
inst1:- prod1
inst2:- prod2
Point1:- We have 2 node RAC with ASM disk and database is okay. Now i want to make DR on single node with ASM disk created already.
Point2:- grid and oracle users are on RAC prod database & also same grid and oracle users on SINGLE node DR
Point3:- Took RMAN backup from prod database ( 2 node RAC ) and copied to DR as shown below:
RMAN>backup device type disk format '/u02/stby/%U' database plus archivelog;
RMAN>backup device type disk format '/u02/stby/%U' current controlfile for standby;
scp -rp /u02/stby/* [email protected]:/u02/stby/
Point4:- Now when i run below command on DR ( oracle@linuxdr2 )
[oracle@linuxdr2 stby]$ rman target sys/pwd@prod1 auxiliary /
Recovery Manager: Release 11.2.0.3.0 - Production on Sun Mar 10 13:18:20 2013
Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD (DBID=220323208)
connected to auxiliary database: PROD (not mounted)
RMAN> duplicate target database for standby;
Starting Duplicate Db at 10-MAR-13
using target database control file instead of recovery catalog
configuration for DISK channel 2 is ignored
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=1142 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 10-MAR-13
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /u02/stby/33o464m6_1_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/10/2013 13:19:22
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred
Can you please help me to resolve the issue.
Thanks,
VikharRMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 03/10/2013 13:19:22
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred Any errors in alert log file?
Have you tried once again ?
Why cant you go for RMAN duplicate from active database, If you have any concerns then enable trace of RMAN and share the information
rman target / log=/u01/test/rman_log.txt trace=/u01/test/rmantrace.log -
Standby setup in 11g R2 RAC to single node
Hi,
How can we setup 11gR2 Standby Setup : Primary Database 2 Node RAC to Standalone Standby Databaseashish wrote:
Hi,
Our requirement is to create single node standby of a 11g R2 RAC 2 node database.To implement there is not much changes in functionality of dataguard, Except some new features like
1) Active dataguard
-- Where you can run MRP even in open status, so that it can be only readable.
2) password file on standby should not be created, it should copy from primary and rename it.
3) from 11g you can perform duplicate from active database without backup.
& so on.
To build a stand alone standby from 2-node RAC, MAA pdf is better one
http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimaryracphysicalsta-131940.pdf
http://www.oracle.com/technetwork/database/features/availability/twp-dataguard-11gr2-1-131981.pdf
*How to create physical standby database with 11g RMAN DUPLICATE FROM ACTIVE DATABASE [ID 747250.1]*
Maybe you are looking for
-
How to write file in user's local desktop
Hi, Using the WriteFile action, i can write the file in inetpub/wwwroot in server. Is there any way to write the file in user's local drive folder? Although now i am writing the file to server and allowing the user to access it through URL but I susp
-
Why is firefox allowing blocked cookies
I added a bunch of adware cookies in firefox to be blocked; the very next time after running a scan, I find the same blocked cookies were allowed. Based on this, firefox is not blocking cookies from the blocked list. Why?
-
The Personal Attacks announcement
Wow! I just browsed over here to see what was up after being immersed in other stuff for some weeks, and I see all the discussion culminating in the Jan. 12 announcement in the Database - General forum. However, I am rather alarmed by this one line:
-
About Skin library...
Do you know where I can download Skin library and how I can show that library to JBuilder 7.0 ???
-
FORM CANNOT BE FILLED-OUT AND SAVED?
I want the user to fill-out and be able to save to their computer, without saving over my original. It works fine if the user has acrobat standard 8,but if they don't or only have Adobe Reader, the form cannot be filled out and saved. Only a blank co