Single PC using Multiple Authorizations

Why can a single computer use multiple authorizations for the Apple ID if I forget to deauthorize iTunes before reinstalling Windows? Does the Windows version use the MAC address of the motherboard or a combination of the hard drive volume GUID, registry, and other hardware components?

deauthorize all earlier last year
Note: You may only use this feature once per year. The Deauthorize All button will not appear if you have fewer than two authorized computers. If you need assistance on using this feature, please contact iTunes Store support via email (http://www.apple.com/support/itunes/store/).
About iTunes Store authorization and deauthorization

Similar Messages

How to generate a single report using multiple Databases

Hi All
Is it possible to create a single report using multiple databases
I am working on Database A to generate reports usually,, but now i have a second database for which the data is coming from flat files now i have to use few tables from
Database B to generate a single report,,,,, can any one help with the process

Hi,
i didn't see this properly in your post:
but now i have a second database for which the data is coming from flat files if you have ETL then make flat files as source then create target tables in db:B itself.. .Now, import them in the rpd..
If not, import both those tables into rpd with different connections..
Create physical joins by selecting those tables and perform joins operations over db's in physical layer..

How to achieve restriction for a single user having multiple authorization

Hi,
I have a requirement that an user has 4 authorizations attached to him.
Auth1:
0REGION: US, INDIA,JAPAN
0PRODUCT: SHAMPOO
Auth2:
0REGION: US
0PRODUCT:SOAP
Auth3:
0REGION: *
0PRODUCT: DETERGENT
Auth4:
0REGION: ASIA
0PRODUCT: *
Now, this user when execute a report, then the report should pop up which authorization to choose and display the data accordingly on the specific input. For example.... if the user enters auth1, then PRODUCT SHAMPOO for REGION US,INDIA and JAPAN will be displayed.
Please help how to achieve this.

Hi
You can try out following things
Create a Info object for Authorization and include it in infocube on which query is based. Keep authorization blank in the info cube.
Maintain relation ship between Authorization Product and Region in DSO or Database table.
Create characteristics variable for authorization infoobject, Product and Region. Selection screen variable for Autorization will be ready for user entry. Selection screen variable for Product and Region will be customer exits variable.
In I_step = 2, populate variable values for Product and customer based on the user entry for authorizaton variable and clear values of authorization variable
Kindly let me know incase further details required
Best Regards
Rohit

Multiple Authorization groups to be used in OB52 for a single company code

Hello All,
I need help in creating and assigning authorization groups in Transaction Code: OB52 to control the postings of few users in one authorization group. That is i want some users to post in 2 back period and others in only 1 back period.I have tried from my side and it is still not working.
I followed the following step:
I have created 2 groups and assigned the users accordingly but the thing is i am only able to find 1 feild for entering authorization group
If there is any thing i am missing or if i have done some thing wrong in this process please help me.
Please Provide me the logic of how to use two authorization groups with one feild.
Best Regards,
Ravi
Edited by: Ravi Eddhula Reddy Kumar on Apr 3, 2011 1:01 PM

Hi,
Try with this possibility
In ob52 create two rows.
Assign the required periods for Group A in Row 1
Assign the required periods for Groub b in Row 2
Regards
Prasad

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

How to use multiple hierarchies for a single char in single query

Hi,
Is there any way that we can use multiple hierarchies for a single char in single query. I tried and it just allows me to select one hierarchy even if I use hierarchy variable.
I have a requirement where user wants to see information related to a cost center with different cost center groups in different hierarchies (every year has different cost center group hierarchies).
Suppose I want to see information related to a cost center from year 2001-2004.in these four year cost center may have been associated to different groups depending upon that year hierarchy. How can I do that?
Thanks
Jona

Nope. Now way to do this.
There is always just one hierarchy assigned to a characteristic. And even if the hierarchy was time dependent, it only reads it for one key date and not according to transaction data.
Regards,
Beat

Using multiple ipods on a single itunes

I currently have a 40GB ipod and have bought for my wife and daughter 2 2gb ipod nanos'. i have all our music on itunes in one library, how can i download only the songs my wife or daughter want onto their ipods as opposed to downloading every item which is what happens with my ipod currently
Hope you can help
Thanks
Dave

There are a couple of recommended methods for using more than one iPod on a single computer. Method one is to have individual Mac or Windows user accounts which by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. Each iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists.
Method two is to set your preferences so that either one or all iPods get updated with only certain playlists within one library. Have a look at this article and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer
Another option when using a single library is to set the iPods to manual update: Managing content manually on iPod
Choosing the update option "automatically update selected playlists only" (called Sync Music - Selected playlists in iTunes 7) allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPods. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod ( for example, around 3700MB for a 4GB or 1800MB for a 2GB Mini or Nano). You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process.

Any Tutorial / Sample to create Single PDF from multiple source files using PDF assembler in a watched folder process. I have a client application which will prepare number of source files and some meta data information (in .XML) which will be used in header/footer. Is it possible to put a run time generated DDX file in the watch folder and use it in Process. If possible how can I pass the file names in the DDX. Any sample Process will be very helpful.

If possible, make use of Assembler API in your client application instead of doing this using watched folder. Here are the Assembler samples : LiveCycle ES2.5 * Programming with LiveCycle ES2.5
Watched folder can accept zip files (sample : Configuring a watched folder to handle multiple input files and write results to a single folder | Adobe LiveCycle Blog ). You can also use execute script to create the DDX at runtime : LiveCycle ES2 * Application Development Using LiveCycle Workbench ES2
Thanks
Wasil

Single item shipment using multiple trucks

Hi Friends,
I have a typical requirement where my client want to ship one of their product ( A Huge item, which they dismantle it for shipment) using multiple trucks. How we can handle this situation using SAP LES module? They can hire multiple trucks to ship this item by road to the destination using multiple service providers. So the service cost also need to be settled for all these service providers. Will SAP allow to split a single item through multiple shipments? I really appreciate a solution for this.
Thanks

There are a couple of recommended methods for using more than one iPod on a single computer. Method one is to have individual Mac or Windows user accounts which by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. Each iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists.
Method two is to set your preferences so that either one or all iPods get updated with only certain playlists within one library. Have a look at this article and see what you think and go for whichever you feel suits your needs best: How To Use Multiple iPods with One Computer
Another option when using a single library is to set the iPods to manual update: Managing content manually on iPod
Choosing the update option "automatically update selected playlists only" (called Sync Music - Selected playlists in iTunes 7) allows you to create a playlist specifically for each iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used by the other iPods. Make your playlist a Smart playlist and limit the size to just below the advertised capacity of your iPod ( for example, around 3700MB for a 4GB or 1800MB for a 2GB Mini or Nano). You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes

How to find multiple keys in single cell using Numbers?

I'm trying to add functionality to one of my Numbers tables where want to check a single cell for multiple keywords from a list. The hole thing works perfectly fine in Excel but it behaves differently in Numbers.
The formula I am using is:
=IF(ISERROR(LOOKUP(2^15;FIND($E$2:$E$11;A2)));"not found";"found")
The following screenshots show that it correctly finds the keys in the cell when using Excel but not in Numbers. Although, it seems to work if the key is in the same row as the input cell.
Excel table using the formula I posted in the C column:
Numbers table using the formula I posted in the C column:
Would be really happy if somebody knows how I could accomplish that!
Cheers,
Maik

If you are working in Numbers you can do this efficiently with a small AppleScript without going back to Excel or clone. One click and you get the following result:
This script works with Numbers 2.3, which your screenshot suggests you are using. If you are using Numbers 3 it needs a very small adjustment.
This is the script:
--https://discussions.apple.com/thread/6315365?tstart=30
property inputCol : 1 --> col A, as in example
property resultCol : 3 --> col C, as in example
property keysCol : 5 --> col E, as in example
property targDoc : 1 --> 1 is front document; can change to "MyDocName"
property targSheet : 1 --> 1 is first sheet; can change to "MySheetName"
property targTable : 1 --> 1 is first table; can change to "MyTableName"
tell application "Numbers"
          set t to document targDoc's sheet targSheet's table targTable
          set keysList to t's column keysCol's cells's value
          repeat with i from 2 to t's row count -- assumes 1 Header Row
                    set inputVal to t's row i's cell inputCol's value
                    if inputVal is not 0 then --skip blank cells; Numbers 2 reads blanks as 0
                              --check if Input matches a key:
                              if inputVal is in keysList then
                                        set t's row i's cell resultCol's value to "found"
                              else
                                        set t's row i's cell resultCol's value to "not found"
                              end if
                              --check if Input contains a key:
                              repeat with aKey in keysList
                                        if inputVal contains aKey then set t's row i's cell resultCol's value to "found"
                              end repeat
                    end if
          end repeat
end tell
--end of script
To run, copy into AppleScript Editor, change the properties if needed, and click the green triangle 'Run' botton.
SG

How To Use Multiple Currencies in single payroll ........

Dear All
Can you help me How To Use Multiple Currencies in single payroll?
with regards
User600722

I am not a functional expert. but ML Note 150173.1 (which is quite old) states that this is not possible.
Srini

Use multiple LDB in a single program

Hi,
I want to use multiple log Database in a single program, is there a way to acheive the same..
Thanx.
Arjun.G

Hi,
You can use function module "LDB_PROCESS" to call a second Logical Database from a program where you already assigned one Logical DB.
There is a documentation and sample program available in every SAP system.
1. Call transaction ABAPDOCU
2. Expand node: Database Access > Logical Databases
3. Double click on node: Calling LDBs using a Function Module
There you will see an example how this can be achieved.
<<text removed>>
Regards,
Ogeday
Edited by: Matt on Feb 17, 2009 5:54 AM - please do not ask for points

Using multiple LISTBOX in single Policy of Microsoft Group Policy .adm file?

OK, I am writing a .adm file and here is code for a policy within a category
CATEGORY !!A_CATEGORY
POLICY !!A_POLICY
KEYNAME "Software\Policies\ABC\ListBoxes"
PART !!PART_1_Text LISTBOX
ALUEPREFIX "FirstListBox"
END PART
PART !!DestPort_Label LISTBOX
VALUEPREFIX "SecondListBox"
END PART
END POLICY
END CATEGORY
The .adm file is successfully loaded in group policy editor without any problem and shows two list boxes too. I can give input for both list boxes and apply/ok without any problem. The real problem is that on registry location "Software\Policies\ABC\ListBoxes",
there comes only registry values as SecondListBox1, SecondListBox2, SecondListBox3 .... and no values for FirstListBox. Ideally, there should also be FirstListBox1, FirstListBox2, FirstListBox3 ...
I did some experiments and found that only the registry values with last PART (i.e. SecondListBox) are shown in registry and all other PART values before that are ignored. Lastly, the problem is only with multiple LISTBOX in a single policy. I can use multiple
CHECKBOX, COMBOBOX, DROPDOWNLIST, EDITTEXT, TEXT and NUMERIC within a single policy without any problem both in Windows 2003 Server and Windows 2008R2 Server
Baig

> and no values for FirstListBox. Ideally, there should also be
> FirstListBox1, FirstListBox2, FirstListBox3 ...
Since you do not use "ADDITIVE" it seems the whole key is cleaned out
before processing the second list. Give it a try :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

BC4J Problem using multiple EntityObjects in a single ViewObject

Hi,
I have found a bug while using multiple EntityObjects in a single ViewObject.
Considere the following example:
Table A:
A_ID
Table B:
B_ID
A_ID (FK) NULLABLE
TABLE C:
C_ID
B_ID (FK) NULLABLE
For each table there is a corresponding EntityObject : AEntity, BEntity and CEntity.
Now building a ViewObject based on CEntity, BEntity and AEntity, where AEntity and BEntity are referenced via their corresponding associtaions, the following problem occurs:
1. As long as both IDs are not NULL everything works fine, but when I set the B_ID attribute of CEntity to NULL I receive a NullPointerException with the detail "null".
2. If the attribute A_ID of BEntity is NULL the values based on AEntity are not updated at all (they keep the value they had for the last row).
Any information or feedback on this issue would be very welcome!
Regards
Frank

Here's a sample code that works for a
LineItem->OrdView->CustomerView case,
public void setOrdId(Number value)
    //set the boolean if there's a current order.
    boolean hasOrd = (getEntity(1) != null);
    setAttributeInternal(ORDID, value);
    //after the OrdID is set, check if there's a valid Ord Entity in this row.
    if (hasOrd && getEntity(1) == null)
      //if not, then set the Customer Entity to null as well.
      super.setEntity(2, null);
      LinesViewImpl vo = (LinesViewImpl)getViewObject();
      //And force a RowUpdated event for "customer-entity-usage-attributes".
      vo.notifyRowUpdated(findRowSetForRow(null), new oracle.jbo.Row[] {this}, new int[]{6,7});
} Note that in the above, you have to "override" notifyRowUpdated method in the ViewObjectImpl subclass, so that it's available to the LineViewRowImpl subclass. You can do this
globally by creating a custom subclass of ViewObjectImpl that all the VOs in your application "extends".

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0

Use single realm for multiple web applciation in sharepoint 2013 and adfs 2.0
Please help!!

I dont think you can do this, because you have to name/url of the web application in realm. You have to add new realm for each web application.here is script to add another realm.
Add-PSSnapin "Microsoft.SharePoint.PowerShell"
$sts = Get-SPTrustedIdentityTokenIssuer | where {$_.Name -eq "ADFS2.0"}
$uri = new-object System.Uri("http://url/")
$sts.ProviderRealms.Add($uri, "urn:sharepoint:Name")
$sts.Update();
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Single PC using Multiple Authorizations

Similar Messages

Maybe you are looking for