TCP/IP instrumented debugging with Blackfin EZ-kit

I have been evaluating the LabVIEW for Blackfin with a BF537 EZ-Kit the last few days...so far, I have been able to get all the example programs to run using the non-instrumented USB debugger interface.
I have run the Web Server Buttons example, and I can cause the LEDs to blink by pressing the buttons on the browser interface, so I know that my crossover cable and DHCP server are running correctly on my laptop, and that I can communicate with the EZ-Kit over TCP/IP.
When I get to the example where they want you to debug using the instrumented TCP/IP debugger interface, the program loads using USB, then I get a dialog box that looks like it's trying to make a connection to the EZ-Kit via TCP, but the dialog disappears after a 20-30 seconds, and the program does not run. During the time the dialog is waiting to connect, I can ping the EZ-Kit from a DOS box and the EZ-Kit has acquired an IP address from my DHCP server.
What I am wondering is this: how does the debugger interface know what the IP address is to perform the instrumented debugging? Is there a config file somewhere that I need to enter an IP address into? Does the debugger use UDP to find the EZ-Kit? The debugger does not seem to be able to find the Ez-Kit, and it occurs to me that I haven't told any of the LabVIEW components what IP address that EZ-Kit will have....

The implementation of the Blackfin target is partially located in "plug-in" VIs that you can access. Open "C:\Program Files\National Instruments\LabVIEW 7.1 Embedded\resource\LabVIEW Targets\Embedded\vdk\vdk_LEP_TargetPlugin\LEP_vdk_ScriptCompiler.vi". You can see in the attached screenshot where this plugin VI determines the IP of the host PC and concatenates it in as a compiler flag. You can modify this LabVIEW code to hard-code that IP if you have multiple IP addresses, or even add functionality to programmatically get the correct IP address!
Message Edited by Michael P on 09-14-2006 02:22 PM
Michael P
National Instruments
Attachments:
BFIP.JPG ‏49 KB

Similar Messages

Computer won't start up after recent version of mountain lion. My power Mac was running extmely slow this morning, so i shut down to restart. As it is starting the screen goes black, says something about debugging with the word panic in parentheses. was

I upgraded to latest version of mountain lion yesterday, this morning my power Mac was running extremely slowly (while typing, had to wait a second or two for words to appear), I shut down to see if problem would clear up. When starting up, screen went black with programming jargon, something about debugging with the word panic in parentheses. Screen then goes back to gray, says Mac encountered a problem and has to restart once I push a key. Apple logo comes on gray screen, icon keeps circling and nothing happens. This has happened three times in a row after shutting down and trying to restart. Any thoughts?

When verifying disk, said could not repair disk, back up as many files as possible then re format disk. Computer now doing Internet recovery. Should I. Do the following in this order
1 restore from back up on time machine
2 re install osx
These are the options coming up on osx utilities window

I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scann

Hi!
After Windows update in april 2014 I cant any longer use the scanning funktion via network from Canon MF8330 Cdn multifunktion printer/fax/scanner machine! It worked fine Before the april Windows update installation.
I have reinstalled with Canons driver kit 2005b för Windows 7 64 bit. All works fine until the scanner installation ends, then system report that it cannot install the scanner and I have to try installing again. I have done that now several times but it helps not. I Think it has something to do with that the Canon scanner drivers isn´t 64 bit files, or the problem is that windows update has replaces saome dll file to a never version that not work with Canon drivers.
I have seen that there is a service pack 1 from Canon för Windows 8 and 8,1, can I use that service pack to get a never dll file for scanner or work this only for windows 8 version.
Have someone a solution to this! I have contacted the Canon support already and they say that its a Microsoft problem!
Very thanful for help in this case!
Greetings
Sixten
Hi!
I am installing the drivers from Canons site. It is the newest version 2005b for Windows 7 64 bit to MF8330Cdn Canon multifunction printer/fax/scanner. Installation goes well for the printer and fax but not for scanner drivers. The error message is Could not install the scanner. In device manager is there then a unknown device under Image devices. In Device Manager I try to update drivers, but it does not help either, error message is access denied. I am logged on the system with administrator account, therfore it is strange that I get the error message access denied.
I tried earlier to do system restore back to previous time, but it did not work, error was that the system could not do the system restore because of access rights.
is there anything else I could do.
Here is the MF36SCN.inf file for scanner installation from Canon, if it can help You to go further with the problem. Is there something strange in the inf file that does not work in Windows 7 64 bit Windows, something shows that ther is also same 32 bits parts in the inf file.
Greetings
Sixten
; MF36SCN.INF -- Windows Setup File for the MF8300 Series (Windows XP,Vista(64-bit))
; Copyright CANON INC. 2009 All Rights Reserved
; InfID: {BA7E017E-FA42-4831-A084-AA9E671325EE}
; Last Modified: 11-Jun-2009
[Version]
Signature="$Windows NT$"
class="Image"
ClassGUID={6bdd1fc6-810f-11d0-bec7-08002be2092f}
; The above GUID is the class GUID for all scanners and MUST NOT change
Provider=%Msft%
CatalogFile.NTamd64=MF36SCN.CAT
DriverVer=06/17/2009, 11.3.0.0
[DestinationDirs]
DefaultDestDir=11
CNCDsFiles=10,"twain_32\"%CNCRFN%
CNCMediaFiles=10,media
ColorFiles.NT=11,spool\drivers\Color
[ControlFlags]
;ExcludeFromSelect=*
[Manufacturer]
%Mfg%=Models,NTamd64.5.1,NTamd64.6.0
[Models.NTamd64.5.1]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_XP,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_XP,CANON_MFNP&%CNCRFN%
[Models.NTamd64.6.0]
%LPTENUM\CNC.DeviceDesc%=CNCInstall_VISTA,USB\VID_04A9&PID_2708&MI_00
%LPTENUM\CNC.DeviceDesc%=CNCInstallNet_VISTA,CANON_MFNP&%CNCRFN%
;........................................ WinXP(64-bit) section
[CNCInstall_XP.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section
[CNCInstall_VISTA.NTamd64]
Include=sti.inf
Needs=STI.USBSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCAddreg.USB,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstall_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.USBSection.Services
[CNCInstall_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinXP(64-bit) section(Network)
[CNCInstallNet_XP.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData
AddReg=CNCAddreg,CNCUSDAddreg_XP
CopyFiles=WiaFiles,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_XP.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_XP.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;........................................ WinVista(64-bit) section(Network)
[CNCInstallNet_VISTA.NTamd64]
Include=sti.inf
Needs=STI.SerialSection
SubClass=StillImage
DeviceType=1
DeviceSubType=0x1
DeviceData=CNCDeviceData_VISTA
AddReg=CNCAddreg,CNCUSDAddreg_XP,CNCUSDAddreg_VISTA
CopyFiles=Wia2Files,CNCDsFiles,ColorFiles.NT,MPScanLLD,CNCMediaFiles
ICMProfiles="sRGB Color Space Profile.icm"
; used for push button event
Capabilities=0x11
Events=PushButton.Events
DriverVer=06/17/2009, 11.3.0.0
FriendlyName=%CNC.FriendlyName%
[CNCInstallNet_VISTA.NTamd64.Services]
Include=sti.inf
Needs=STI.SerialSection.Services
[CNCInstallNet_VISTA.NTamd64.CoInstallers]
CopyFiles = ScanCoInstaller_CopyFiles_x64
AddReg    = ScanCoInstaller_AddReg_x64
[ScanCoInstaller_CopyFiles_x64]
CNCLSO36b.dll
[ScanCoInstaller_AddReg_x64]
HKR,,CoInstallers32,0x00010000,"CNCLSO36b.dll,Coinstaller_EntryPoint"
;.......................................... Common Section
[PushButton.Events]
PushButtonPushed1=%PushButtonPushed1%,{66F2A894-EC9B-430c-9D52-E8719D200DAC},%ButtonApp%
PushButtonPushed2=%PushButtonPushed2%,{506AC8D1-E030-4f05-8F8A-4476153E2D6C},%ButtonApp%
PushButtonPushed3=%PushButtonPushed3%,{9813E8A6-3652-4768-9AD1-C89E9B5CA956},%ButtonApp%
PushButtonPushed4=%PushButtonPushed4%,{03B58D10-0245-4859-A489-D695C7729FB3},%ButtonApp%
[ColorFiles.NT]
CNZ005.ICC
CNFR08.ICC
[CNCDeviceData]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
[CNCDeviceData_VISTA]
TwainDS=%CNC.TwainDS%
SpecialInfo=%CNC.SPInfo%
DeviceKey=%CNCRFN%
InstallDirectory="\TWAIN_32\%CNCRFN%\"
KeyNamePath=%KEYNAME%
DefaultKeyNamePath=%DEFAULTKEYNAME%
UI Class ID={DF89C549-D67D-4fb0-A575-547073BFAB11}
;The above GUID reused from sample MUST change for each Model.
[CNCAddreg]
HKLM,"%SGDKEY%","DeviceName",,%CNC.MDL%
HKLM,"%SGDKEY%","SeriesName",,%CNC.SRS%
HKLM,"%SGDKEY%","Manufacturer",,"Canon Inc."
HKLM,"%SGDKEY%","ProductFamily",,"TWAIN Scanners"
HKLM,"%SGDKEY%","ProductName",,%CNC.MDL%
HKLM,"%SGDKEY%","InstallDirectory",,"%10%\TWAIN_32\%CNCRFN%\"
HKLM,"%SGDKEY%","DeviceDriver",,"SCANINTF.DLL"
HKLM,"%SGDKEY%","ProductId",,"MF8300          "
HKLM,"%SGDKEY%","DataSourcePath",,"%10%\TWAIN_32\%CNCRFN%\cisds.ds"
HKLM,"%SGDKEY%","TextEnhance",0x00010001,0
HKLM,"%SGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%SGDKEY%","AutoPreview",0x00010001,0
HKLM,"%SGDKEY%","AutoClose",0x00010001,0
HKLM,"%SGDKEY%","SavePreview",0x00010001,1
HKLM,"%SGDKEY%","DriverDate",,"06 2009"
HKLM,"%SGDKEY%","DriverVersion",,"11.3.0.0.mf09"
HKLM,"%SGDKEY%","ColorGear",,%CNC.ColorGear%
HKLM,"%SGDKEY%","ColorMatch Platen",,"CNFR08.ICC"
HKLM,"%SGDKEY%","SGIPPDEF",,"CNCFR08.DAT"
HKLM,"%SGDKEY%","Descreen",0x00010001,0
HKLM,"%SGDKEY%","Unsharp",0x00010001,3
HKLM,"%SGDKEY%","MultiLimitThreshold",0x00010001,180
HKLM,"%SGDKEY%","MultiJackUp",0x00010001,9
HKLM,"%SGDKEY%","MultiTrimJackUp",0x00010001,20
HKLM,"%SGDKEY%","CardPhotoDistThr",0x00010001,30
HKLM,"%SGDKEY%","PhotoTrimThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoRThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoGThr",0x00010001,210
HKLM,"%SGDKEY%","PhotoBThr",0x00010001,210
HKLM,"%SGDKEY%","CardTrimThr",0x00010001,30
HKLM,"%SGDKEY%","CardRThr",0x00010001,30
HKLM,"%SGDKEY%","CardGThr",0x00010001,30
HKLM,"%SGDKEY%","CardBThr",0x00010001,30
HKLM,"%SGDKEY%","ParWhiteBlackEth",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackEthDG",0x00010001,5
HKLM,"%SGDKEY%","ParWhiteBlackSth",0x00010001,35
HKLM,"%SGDKEY%","ParWhiteBlackVth",0x00010001,10
HKLM,"%SGDKEY%","ParLabelingHth",0x00010001,30
HKLM,"%SGDKEY%","ParLabelingLeft",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingTop",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingRight",0x00010001,1
HKLM,"%SGDKEY%","ParLabelingBottom",0x00010001,1
HKLM,"%SGDKEY%","DT_Left",,"10"
HKLM,"%SGDKEY%","DT_Top",,"0"
HKLM,"%SGDKEY%","DT_Width" ,,"1.5"
HKLM,"%SGDKEY%","DT_Length",,"4.5"
HKLM,"%SGDKEY%","DT_Border_1",,"2.5"
HKLM,"%SGDKEY%","DT_Border_2",,"3.5"
HKLM,"%SGDKEY%","DT_BkTh",,"18"
HKLM,"%SGDKEY%","DT_MinWhThr",,"15"
HKLM,"%SGDKEY%","DT_MaxWhThr",,"45"
HKLM,"%SGDKEY%","ButtonNum",0x00010001,1
HKLM,"%STIKEY%","MF8300",0x00010001,1
[CNCAddreg.USB]
HKLM,"%SGDKEY%","AvailableDriver",0x00010001,1
[CNCUSDAddreg_XP]
HKLM,"%WIASGDKEY%","ColorMatch",0x00010001,1
HKLM,"%WIASGDKEY%","ColorGear",,"%CNC.ColorGear%"
HKLM,"%WIASGDKEY%","TextEnhance",0x00010001,0
HKLM,"%WIASGDKEY%","Descreen",0x00010001,0
HKLM,"%WIASGDKEY%","UnsharpMask",0x00010001,0
HKLM,"%WIASGDKEY%","HiDefinitionMode",0x00010001,0
HKLM,"%WIASGDKEY%","ProductId",,"MF8300          "
HKLM,"%WIASGDKEY%","ButtonNum",0x00010001,1
HKLM,"%WIASGDKEY%","DspGamma",0x00010001,1
HKLM,"%WIASTIKEY%","MF8300",0x00010001,1
HKR,,USDClass,,"{4BA01336-9934-455e-8FB8-4A47A638DF0E}"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E},,,"Canon USD"
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,,,%11%\CNCC8300.DLL
HKCR,CLSID\{4BA01336-9934-455e-8FB8-4A47A638DF0E}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[CNCUSDAddreg_VISTA]
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11},,,"WIA Driver UI Extension"
HKCR,CLSID\{DF89C549-D67D-4fb0-A575-547073BFAB11}\shellex\ImageProcessingFilter\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}
; The above GUID is specific to MF8300 and MUST change for a different model.
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC},,,"Canon Image Processing Filter"
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,,,%11%\CNCE8300.dll
HKCR,CLSID\{CA0D4D3E-98ED-4787-AF02-4AF2A1303ACC}\InProcServer32,ThreadingModel,,"Both"
; The above GUID is specific to MF8300 and MUST change for a different model.
[WiaFiles]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
[Wia2Files]
CNCC8300.DLL
CNCI8300.DLL
CNCL8300.DLL
CNCE8300.DLL
[CNCDsFiles]
CISDS.DS
SGUI.DLL
SGUI_RES.DLL
WIARES.DLL
IOP.DLL
ITLIB32.DLL
SCANINTF.DLL
TPM.DLL
CNCFR08.DAT
MC2.TXT
JDA_CIMG.DLL
NBS4MB.DLL
NBSCOR4M.DLL
RMSLANTC.DLL
RSTCOL.DLL
[MPScanLLD]
CNCMFP36.INI,,,0x20
CNCLSI36b.DLL,,,0x20
CNCLSD36b.DLL,,,0x20
CNCLSC36b.DLL,,,0x20
CNCLST36b.DLL,,,0x20
CNCLSU36b.DLL,,,0x20
[CNCMediaFiles]
CSSAMP1.MID
;-------------------------------Source Index
[SourceDisksFiles]
CNZ005.ICC=1
ITLIB32.DLL=1
JDA_CIMG.DLL=1
NBS4MB.DLL=1
NBSCOR4M.DLL=1
RMSLANTC.DLL=1
RSTCOL.DLL=1
CISDS.DS=1
SGUI.DLL=1
IOP.DLL=1
SCANINTF.DLL=1
TPM.DLL=1
SGUI_RES.DLL=1
WIARES.DLL=1
CSSAMP1.MID=1
CNCFR08.DAT=1
CNFR08.ICC=1
MC2.TXT=1
CNCC8300.DLL=1
CNCI8300.DLL=1
CNCL8300.DLL=1
CNCE8300.DLL=1
CNCMFP36.INI=1
CNCLSI36b.DLL=1
CNCLSD36b.DLL=1
CNCLSC36b.DLL=1
CNCLST36b.DLL=1
CNCLSU36b.DLL=1
CNCLSO36b.DLL =1
[SourceDisksNames]
1=%D1%,scan.cab,
;-------------------------------String Aliases
[Strings]
Msft="Canon"
Mfg="Canon"
SGDKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\11.3\Devices\MF8300"
STIKEY="Software\Wow6432Node\Canon\SateraMFP1\ScanGear\STI"
DEFAULTKEYNAME="Software\Wow6432Node\Canon\SateraMFP1\Toolbox Ver4.9\Devices\"
KEYNAME="\Software\Canon\MFToolbox\"
WIASGDKEY="Software\Canon\SateraMFP1\WIA\3.0\Devices\MF8300"
WIASTIKEY="Software\Canon\SateraMFP1\WIA\STI"
D1="Canon MF8300 Series Setup Disk"
LPTENUM\CNC.DeviceDesc="Canon MF8300 Series"
ButtonApp        = "MF Toolbox Ver4.9"
CNCRFN           = "MF8300"
CNC.MDL          = "Canon MF8300"
CNC.SRS          = "Canon MF8300 Series"
CNC.DeviceDesc   = "Canon MF8300"
CNC.SPInfo       = "Canon MF8300 Scanner"
CNC.TwainDS      = "Canon MF8300 Series"
CNC.ColorGear    = "FR08"
PushButtonPushed1= "Scan-1"
PushButtonPushed2= "Scan-2"
PushButtonPushed3= "Scan-3"
PushButtonPushed4= "Scan-4"
CNC.FriendlyName     = "WIA Canon MF8300 Series"
greeting
Sixten

How I fixed it, at least for now:
1. I've been using OC Genie for a few days, it has been working great on Windows but I guess it was causing many games to crash to the desktop so I decided to turn it off, since then the memory issue started to happen, since this morning.
2. I can only think of my computer got OC Genie addicted, like addiction to crack or cocaine, and the memory, or call it nervous system, wanted more OC Genie, so it gave it to him and bingo, my 4GB readable, but then I used of trickery and deceit to disable OC Genie again and my 4GB is back again without OC Genie.
Hope this helps someone.

Gung Ho security team vs Debug with replace in development

Hi fellow developers. I'm trying to talk our security team off the ledge and I want to conduct an informal poll regarding the responsible use of debug with replace in a DEVELOPMENT environment. For the newer developers.. replace is much more powerful in debugging because you can change the values of variables and some system fields like sy-subrc which makes it very powerful.
Our development environment is setup as follows:
Client 300, ABAP Development \config. We promote to QA, and Prod from here but can't unit test because no data allowed. Debug with NO replace allowed here.
Client 320 Unit testing, debug with replace is allowed.
both of these clients are on the same instance, same sid so they share client independent information.
Our security team claims that it's a security risk to allow debug with replace in our Client 300 because someone could change a security profile or something like that. Here's my question...
Are you authorized to debug with replace in your development environment and if not, what's the reason you were given? I'm looking for arguments one way or the other to use as precedent for a meeting.
Your prompt response is appreciated.
Dan

Hi
I think the option can be dangerous in QA or PROD system because you can skip some control and change the data normally can't be changed.
A classicl example is trx SE16: by debug you can change directly the data of the most of tables.
But I don't believe can be a risk in development system, in this enviroment the developer should have no limit, otherwise to work and test can belong very hard.
Max

I just installed the latest Security update and now I can't open iPhoto. I keep getting a message that it quit unexpectedly because of a problem with the scene kit plugin. I have no access to my photos.

I just installed the latest security update and now I cannot access iPhoto. I keep getting a message that it quit unexpectedly due to some conflict with the Scene Kit plugin.
I'm using a Macbook Pro Mavericks Version 10.9.5

Probably the reboot used to log into the Guest account and then your account again fixed the problem. If often will.

Can i Use The Apple Wired Keyboard With Camera Connector Kit

Can i Use The Apple Wired Keyboard With Camera Connector Kit
3g 64gb verizon

People report it is still possible to use a wired USB keyboard with the CCK, if you use a powered USB hub to get around the "not enough power" error message. (I have done this with an older Apple USB keyboard my non-jailbroken iPad1 on iOS 4.3.3.) Normally, powered USB hubs have a AC power adapter so you lose portability unless you can find a battery powered USB hub. At this point, the (in)convinience of the USB hub becomes an issue, depending on what you get.
And wired USB keyboard were never supported for the iPad. So there's no guarantee that it will continue to work with future iPad updates from Apple. So best to go with a Bluetooth keyboard unless you have a specific USB keyboard that you "must" use. If you have all the equipment already, I say give it a try. But I would not recommend trying a USB keyboard if you have to purchase anything.

Novice here: can video from thumb drive be imported to iPad 2 with the connect kit? If so how. I have a thumb drive with video on it but iMovie doesn't seem to detect it.

Can video from thumb drive be imported to iPad 2 iMovie with the connect kit?

emory53, I'm going to see if the Moderator of this Discussion group can place this question in the iMovie for iOS Discussion Group (yes there are two, count'em two iMovie Discussion Groups) hopefully that will happen shortly.

Error opening test scripts in Build and Debug with Screens

Hello,
I am testing scenarios in the Build and Debug with screens mode in OPM. I save each scenario as a test script by clicking the Export button and saving. Some test scripts are able to be opened again, yet when I try to open others, I get the error message shown at the link below and am unable to load the test script.
http://imgur.com/uqh80
This did not happen previously, it just started today. All of these test scripts were created today, and the attributes have not been changes since the test scripts were created. This is seriously hindering my scenario testing ability.
Does anyone know how to rectify this problem?
Thanks,
Christine

Hi Kristy,
I am in OPM 10.2.
To troubleshoot, I tried redoing the test scenarios that werent working from scratch (rather than building off a previous scenario), and this time it worked. I am not sure why it works now and didnt before, and I am also not sure if they will continue working.
I will continue creating the scenarios and will be sure to update if it fails again. In the case it does fail, I will try your export recommendation.
Christine

How debug with Ant

Hi All,
I am running my application with apache-ant-1.6.5.
Can anybody give suggestion to debug the my application using jdb with ant.
Is there setting in ant so that when i run my program using ant i can debug with jdb.
waiting for reply,
Thanks,
Nitin.

assuming you are running the app through ant using the <java> tag, you should be able to add a
<jvmarg value="-Xdebug"/>
tag inside the <java> tag, to enable remote debugging with jdb

How to debug with newer version of the player

I want to debug a fla project that runs correctly with the player supplied with flash CS5.5 but it crashes with player version 11.
I downloaded the debug version of the player 11 and i installed on my pc. Then i even tried to overwrite the flashplayer in /players/debug folder but when i open flash and try to debug my fla, it always start the debug with the player old version.
What am i doing wrong?

Hello,
Here you can download the newer versions of ODBC drivers with or without Oracle Universal Installer:
http://www.oracle.com/technology/software/products/rdbodbc/index.html
I wait that this can help you!!
Best Regards,
Paola Pullas
http://www.ecuoug.org

TCP server on PC with 2 netowork interface

If I need to create a TCP server on PC with 2 netowork interface with different IP, such as 192...... and 172...., and the client side IP is 192...., is there anything I need to take care.
Any suggestion, thanks.
Solved!
Go to Solution.

No, by default the server will listen on all interfaces.
Mark Yedinak
"Does anyone know where the love of God goes when the waves turn the minutes to hours?"
Wreck of the Edmund Fitzgerald - Gordon Lightfoot

OC4J debug with Eclipse

I been trying to debug a oc4j application with eclipse but so far I can only see variables like
' this IndexAction,
arg0 ActionMapping,
arg1 null,
arg2 EvermindHttpServletRequest,
arg3 EvermindHttpServletResponse' ,
I did setup Ant compile to create an *.ear in debug.
classpath="${libclasspath};${build}/${classes}" debug="true"
debuglevel="lines, vars, source"/>
Also, I cannot place a watch file in any variable.
Is there a configuration that I need to do with the java compile or OC4J to be able to see the content of the variables.
Thank you
P.S. with Jdev I'm able to debug with the embedeed-OC4J but the config of the \j2ee\home\config\*.xml files are totally different.

Starting oas server with this command, -Xdebug -Xrunjdwp:transport=dt_shmem,server=y,suspend=n,address=4000,
Eclipse debugger cannot connect anymore but apparently dt_shmem is used for windows machines and dt_socked for unix.
Any hints would be greatly appreciated.

Apex 4.1 remote debugging with dbms_debug_jdwp - breakpoints not working

Hi all,
I'm using remote debugging with sqldeveloper like described here:
http://www.oracle.com/webfolder/technetwork/de/community/apex/tipps/remote-debug/index.html
http://sueharper.blogspot.com/2006/07/remote-debugging-with-sql-developer_13.html
It works great with my sqldeveloper 3.0 and Apex 4.0.2
Now i tried the same on two other servers with Apex 4.1
The debugger is connecting. I can see the connect and diconnect message in the debug windows in the sqldeveloper.
But the breakpoints are not working.
Is the debugging working in Apex 4.1 for anyone here?
Any ideas why the breakpoints are not working?
BR,
Björn

Hi Björn,
In your APEX application, have you tried updating the URL to include the parameter REMOTE, in order to initiate the remote debug connection? e.g.
f?p=100:1:&SESSION.::REMOTE::Using the REMOTE parameter cuts out the need to specify debug code surrounding statements in the APEX PL/SQL.
The steps are as follows:
1) In SQL Developer, set break points in the the PL/SQL code, and compile using the "Compile for debug" option
2) Execute the following two grants
grant DEBUG CONNECT SESSION to <PARSE USER>;
grant debug on <PROC> to public; <-- might not need public but just whoever the DAD is running as.5) In SQL Developer, right-click on your connection and select the "Remote Debug..." context menu item. This will launch the "Listen for JPDA" dialog.
5) Run the APEX Application page containing/activating the code you wish to debug, and update its URL with REMOTE in the debug parameter of the URL, and then hit Enter.
6) Carry out the action on the page to trigger the breakpoint in your code e.g. submit the page, or click a button on the page, and you should be redirected to the breakpoint in the code in SQL Developer.
Although I'm running with the latest release of SQL Developer, version 3.2.2 (http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html), and APEX 4.2, the 'REMOTE' parameter was introduced with our 3.1 release so will also be available for you to use in 4.1.
Regards,
Hilary

IPhone 4S not working with TomTom Car Kit

Hi,
I have the TomTom car kit for 3GS and have just upgraded to iPhone 4S.
I have one of the iPhone 4 adaptors from TomTom for the car kit, but even with this on, and trying some of the other suggestions online about a strip of velcro, I cannot get the cradle and the iPhone 4S to work together.
Has anyone with a 4S managed to use it with the car kit?
Thanks,
Graz.

Hi All
Right, this is what worked for me;
I had a iPhone 4 running ios 5 and all was fine. Since upgrading my to 4s my TomTom car kit wouldnt regognise the new phone.
Remove the iPhone 4 adapter (retangular stick on thing that comes with the kit specifically for the iphone 4)
turn it over so it is facing the wrong way. You should still have enough stick left behind on the kit itself to stick on again - must be the wrong way around!!
Job done!!
Works a treat

9630 does not connect with Bluetooth Car Kit Speakerphone

Whenever I try to make a call with my Motorola T215 Car Kit Speakerphone, my BlackBerry 9630 Tour "smart"phone says, Connection to Motorola T215 failed. I have followed the pairing instructions that came with the car kit precisely and repeatedly, but still get the same result. To add even more enjoyment to my experience, my connection with the Bluetooth device seems to go on and off as it pleases. I figure the only way to put an end to this issue is to smash it with a hammer, but if you know of another solution, I would appreciate it. My carrier is Sprint, and OS version is 4.2.0.285.

The first thing I would suggest doing it running an upgrade on your device software. To do this you will need your USB cord and access to the internet.
Go to: www.blackberry.com/update and then follow the prompts to update your device software.
This should back up your device data automatically, but to be save incase of any situation that may arise do a backup of your device through the BlackBerry Desktop Software.
Once the update is done, test the Bluetooth connection.
Hope this helps.

TCP/IP instrumented debugging with Blackfin EZ-kit

Similar Messages

Maybe you are looking for