Single valued Report Prompt as start value- calculate the end value
Hi all,
I want to be able to create a report prompt (not a dashboard prompt) on a report.
The prompt has to be a drop down list to select the 'Start Month'. In the report, I'd like to display *12* months starting from the 'Start Month' selected in the Prompt.
So, if the value selected in the Prompt is March 2010, the report should display months from March 2010 to Feb 2011.
PS: This report is not going to be on a dashboard. It will be an ad-hoc report in the Shared Folders for users.
thanks!
I think that clears it up then, yes? So the answer is, use a dashboard to share.
Answers is great for individual use and, if the report doesn't require prompts, for sharing. But once you involve prompts, that's where you need the dashboard as the "palette" on which to "paint" your reports with prompts. Answers is a tool with its purpose, but so is the dashboard. Take advantage of the purpose of the tool and your life will be much easier!
If that answers your question, mark answer as "correct" and close this thread. Thanks.
Similar Messages
-
IPod nano starting to lose the end of songs
I think my iPod nano is starting to lose the end of some random songs. Has this happened to anyone, or am I losing it?
iPod nano 2 GB Windows XPI've found this problem on random songs (but all purchased) and in random places:
- Alone (Radio Mix), Lasgo (ends consistently at 7 seconds) purchased 2/11/06
- Collapsing New People, Fad Gadget (ends at 17 seconds) purchased 6/4/06
- Cowgirl (1994), Underworld (ends at 1:50) purchased 6/4/06
- Goodnight and Go (Immi's Radio Version), Imogen Heap (ends at 50 seconds) purchased 6/4/06
- Headlock, Imogen Heap (ends at 5 seconds) purchased 6/4/06
- I'd Like to Tell You, Venus Hum (ends at 2:54) purchased 6/4/06
- Intuition, Jewel (ends at 1:40) purchased 12/17/05
- Porcelain, Moby (ends at 50 seconds) purchased 2/11/06
- Rhythm is a Dancer (Original Mix), Snap! (ends at 4 seconds) purchased 2/11/06
- Stand (Markus Schulz Club Mix, Jewel (ends at 50 seconds or so) purchased 12/17/05
- Switch /Twitch, Fluke (ends at 35 seconds) purchased 6/4/06
- Take Another Picture, Quarterflash (ends at 8 seconds) purchased 12/17/05
- Turn Me Around (P-Remix), Venus Hum (ends at 31 seconds) purchased 6/4/06
- Upside Down, Jack Johnson (ends at 1:45) purchased 4/14/06
- Wave Force, Perry O'Neil (ends at 2:43) purchased 12/17/05
- We're Going to Be Friends, Jack Johnson (ends at 28 seconds) purchased 4/14/06
- What is Love, Haddaway (ends at 1:38) purchased 7/1/2005
- Yes and No, Venus Hum (ends at 1:50) purchased 6/4/06
- Yes and No (Remix), Venus Hum (ends at 2:03) purchased 6/4/06
It also affects a few audiobooks... -
Safari is non-responsive after intitial start up. Before it can load the homepage (google), it will hang and give a perpetual pinwheel until I force quit the program. Safari works in temporary user account but not in my primary user account. I have reinstalled osx via the command-r upon start up and the problem still persists. Any suggestions on how to reinstall or repair safari?
Thanks for thinking about my problem. I've already experimented with creating a new user, a co-administrator. The programs don't crash when that account is running, just as they don't crash when the guest-user's account runs. So it seems that the problem is limited to the default user's account, which is the one that was running when I installed the updates to the OS and the firmware. Another clue is that the programs that crash as soon as they are launched are *probably* the ones that were open at that time in that account. Yet deleting Saved Application States does not keep the programs from crashing when next launched.
So the mystery continues, but these additional facts will help with the diagnosis, I hope.
Thanks again for your suggestion.
Gordon -
Webm loads completely before playing and starts playhead at the end
Hi,
We are trying to figure out playback of our WebM videos in Firefox. Looking at the native video player by going directly to a video url we have some strange behavior.
We have found that the browser seems to download the entire video before beginning playback. When the video finally does download and playback, we find that often the playhead will be placed at the end of the video. If the playhead is not at the end of the video, you can't just click play, you have to click a position in the "timeline" to get the video to begin playing.
Ideally, the behavior would be that the video beings playback as it starts to download from the beginning of the file.
We are encoding the videos with FFMPEG using libvorbis and libvpx. We server our content from Amazon Cloudfront, but can also test from a lighttpd server (same behavior).
Please let me know if you would like more information and thank you for your help!
Here are a bunch of our videos to look at:
http://cdn.computerscience1.net/2013/spring/lectures/1/lecture1-240p.webm
http://cdn.computerscience1.net/2013/spring/lectures/1/lecture1-360p.webm
http://cdn.computerscience1.net/2013/spring/lectures/1/lecture1-720p.webm
http://cdn.computerscience1.net/2013/spring/lectures/1/lecture1-1080p.webmHas anyone found an answer to this? I tested and used a different converter other than Miro and the issue didn't happen. The webm file played normally. Fact is, i dont want to pay for another converter - I really want to use Miro.
...anything? -
IMovie won't start, but in the end it did
i read the other posts about crashing imovie at the start, but my problem seemed a little different. my imovie started, i saw the app windows, then crashed immediatley. the strange thing was starting it from another account always worked. i then reinstalled, but didn't copy any of the imvie pref files to my new user account, still same prog crash. then i moved all my pictures from the folder "pictures" in /users/xxx/ to another subfolder in the picture folder. before there were like 170 objects in that folder summarizing to 70gb pictures.
i restarted imovie and it worked. i don't know why imovie crashes when there are so many objects in the "pictures" folder but not when they are in a subfolder of that same folder.
anyways, nice work apple for making such great softwarei could even narrow it down to my 44gb iphoto library file, whwn i put that in another place, it works of course i don't have my iphoto library in my media browser window.
again thanks apple for making such great software. -
how can i get everything back?
Error 1015 occurs when a phone is jailbroken. Jailbreaking the iPhone voids any warranty and support from Apple, including this forum.
You can receive no further help here. -
Calculate the performance of an activity according to the hours worked
Hi for all,
I need to calculate the performance of an activity according to the hours worked by anyone. Someone could tell me how can I do this?
timetable of staff
ID HR1 HR2 HR3 HR4 DAY
1 492 720 780 1080 Monday
1 612 720 780 1200 Tuesday
1 492 720 780 1080 Wednesday
1 612 720 780 1200 Thursday
1 492 720 780 1080 Friday
2 492 720 780 1080 Monday
3 492 720 780 1080 Saturday
SQL> Select to_date(to_char(trunc(sysdate) + 492/1440,'dd/mm/yyyy HH24:MI:SS' ), 'dd/mm/yyyy HH24:MI:SS') from dual;
TO_DATE(TO_CHAR(TRUNC(SYSDATE)
20/01/2011 08:12:00
Table Holidays
ID DATE_HOLIDAY HOLIDAY
1 01/01/2011 Holiday X
1 03/15/2011 Holiday Y
1 07/04/2011 Holiday Z
2 01/01/2011 Holiday X
Input Values
Start Date : 17/01/2011
Qtd Days : 0
Qtd Hours : 11
Qtd Minutes: 0
Result
18/01/2011 13:24Regards,Okay here is my second attempt.
With schedule_of_work As
Select 1 ID, 492 HR1, 720 HR2, 780 HR3, 1080 HR4, 'Monday' Day_of_week from dual union all
Select 1 ID, 612 HR1, 720 HR2, 780 HR3, 1200 HR4, 'Tuesday' Day_of_week from dual union all
Select 1 ID, 492 HR1, 720 HR2, 780 HR3, 1080 HR4, 'Wednesday' Day_of_week from dual union all
Select 1 ID, 612 HR1, 720 HR2, 780 HR3, 1200 HR4, 'Thursday' Day_of_week from dual union all
Select 1 ID, 492 HR1, 720 HR2, 780 HR3, 1080 HR4, 'Friday' Day_of_week from dual
), parameters AS
/* Creating a single row of input values that can be used multiple times */
SELECT TO_DATE(:job_start_date,'MM/DD/YYYY HH24:MI') AS job_start_date
, TRUNC(TO_DATE(:job_start_date,'MM/DD/YYYY HH24:MI'),'IW') AS beginning_of_week
, NVL(:days,0)
+ NVL(:hours,0)/24
+ NVL(:minutes,0)/(60*24) AS job_length
FROM dual
), holidays AS
SELECT TO_DATE('01/01/2011','MM/DD/YYYY') AS dt FROM DUAL
), date_range AS
/* Trying to generate a date range that should encompass the maximum date it would take
* to complete the task. Rough estimate is number of 8 hour work days plus a padding of 10 days.
* You may want to adjust this to something more suitable for your business or set it to an artificially
* high value. Be aware of possible performance implicications the higher you set it.
SELECT TRUNC(job_start_date) + (ROWNUM - 1) AS dts
FROM parameters
CONNECT BY ROWNUM <= TRUNC(job_length*24/8) + 10
), schedule_as_dates AS
SELECT sowo.id
, sowo.day_of_week
, dara.dts
, holi.dt
, CASE
/* Only perform the effective hours when the day is not a holiday
* and it matches a date in the date range. Otherwise set effective hours to midnight
* making the running sum below zero.
WHEN sowo.day_of_week IS NOT NULL AND holi.dt IS NULL
THEN dara.dts + HR1/(60*24)
ELSE dara.dts
END AS start1
, CASE
WHEN sowo.day_of_week IS NOT NULL AND holi.dt IS NULL
THEN dara.dts + HR2/(60*24)
ELSE dara.dts
END AS end1
, CASE
WHEN sowo.day_of_week IS NOT NULL AND holi.dt IS NULL
THEN dara.dts + HR3/(60*24)
ELSE dara.dts
END AS start2
, CASE
WHEN sowo.day_of_week IS NOT NULL AND holi.dt IS NULL
THEN dara.dts + HR4/(60*24)
ELSE dara.dts
END AS end2
FROM date_range dara
LEFT JOIN schedule_of_work sowo PARTITION BY (sowo.id) ON sowo.day_of_week = TO_CHAR(dara.dts,'FMDay','NLS_DATE_LANGUAGE=English')
LEFT JOIN holidays holi ON holi.dt = dara.dts
SELECT
CASE
/* This means that we need to go into the second shift (start2-end2) to calculate the end date */
WHEN work_remaining > end1 - start1
THEN start2 + work_remaining - ( end1 - start1 )
/* This means we can complete the work in the first shift */
WHEN work_remaining < end1 - start1
THEN start1 + work_remaining
END AS finish_time
FROM
SELECT b.*
/* Determine how much work is remaining from the previous days value */
, job_length - prev_work_time AS work_remaining
/* Calculate the smallest delta value to pick the right day of the week
to calculate the end date
, ROW_NUMBER() OVER (partition by B.ID ORDER BY DELTA desc) AS RN
FROM
SELECT a.*
/* This computation is used to determine which day of the week we need to use
to determine the end date of the task
, job_length - effective_work_time AS delta
/* retrieve the previous effective_work_time. This will be used above */
, LAG(effective_work_time) OVER (PARTITION BY ID order by start1) AS prev_work_time
FROM
SELECT job_start_date
, job_length
, id
, day_of_week
, start1
, end1
, start2
, end2
/* Compute the amount of time an employee can work in any given day. Then take a running total of this */
, SUM
CASE
/* When the job_start_date is the same day as the first eligible work day we need to diskount (spam filter misspelled on purpose the
* effective work hours because the job could start in the middle of the day.
WHEN TRUNC(job_start_date) = TRUNC(start1)
THEN
CASE
WHEN job_start_date BETWEEN start1 AND end1
THEN (end1 - job_start_date) + (end2 - start2)
WHEN job_start_date BETWEEN start2 AND end2
THEN (end2 - job_start_date)
WHEN job_start_date < start1
THEN (end2 - start2) + (end1 - start1)
WHEN job_start_date > end2
THEN 0
END
ELSE (end2 - start2) + (end1 - start1)
END
) OVER (PARTITION BY ID order by start1) AS effective_work_time
FROM schedule_as_dates
CROSS JOIN parameters
) a
) b
/* Only interested in delta less than zero because the positive deltas indicate more work needs to be done. */
WHERE delta < 0
WHERE RN = 1I got slightly different results then you. My query got me 1/24/2011 at 13:12. I double checked the math and I think that's right.
Hopefully this works out for you. My apologies for any mistakes.
EDIT
Query is fully posted now. -
Issue in calculating sum on a column at the end of the report in Pivot view
Hi,
I have some columns like Hierarchy column A, Non Hierarchical columns B, C and a measure D.
In Pivot view under rows I have placed columns A,B and C in Columns and D in measures. If I try to calculate sum of values at the end of report by using option Sum At the End on columns we are getting an error that grouping by function should be in the select clause of the query.
If I duplicate the column C and put it in rows then I am able to see totals at the end but values are displayed in multiple rows and it won't meet our requirement.
Any suggestion or workarounds on this will be helpful.
Thanks,
VjHi,
let me explain it better..
Col A: GL Segment Hierarchy which will display Level1 to Level n Names
Col B: Level n Code.
Col C: Fiscal Period
Col D: Amount
Now col A and B are in Rows, col c in columns and col D in measures in a pivot view.
Issue is we are unable to have total of measure values at the end of report by using sum at the end. -
Fixed start date and variable end date
I'm using Project 2010 Standard. Task A has already started. It can't end until 2 weeks after the completion of task B. The only way I can make Project schedule this task is by doing so manually, allowing Project to calculate the duration. But then if the
end date of task B changes, Project reschedules the entire task based on the duration without regard for the start date. If I add a % complete to task A, then the end date doesn't change if the end date of task B does. Project seems to fix the duration
once it's calculated. I need the duration to be flexible based on the fixed start date and the end date of task B. This project file is stored in SharePoint so I can't make task A a hammock task. I get the error "You cannot create links from a project
file that exists on a Web folder to another file" even though it's the same file. Any suggestions would be greatly appreciated.WhoKnows,
I'm afraid without a hammock task the only way to do what you want is either with a manual reschedule or a macro to recalculate the duration of Task A when Task B moves.
Update: Okay, after playing around here is a little trick that might work.
1. Break Task A into two parts (e.g. -1 and -2)
2. Set the predecessor of Task A-2 to be finish-to-start with Task A-1 and finish-to-finish + 2w with Task B
Depending on the nature of Task A you may still need to do a little manual adjusting but it will effectively allow the start of Task A to be fixed and the finish to be variable depending on the status of Task B. Does that work for you?
John -
How to find a line/edge that starts at the same point as the end of another
I have an edges table of Lat/Lon data and for a specific edge I want to find any other edges that have the same start point as the end point of the given edge.
I tried the following query:
select geo_street_id from geo_street s2
where SDO_LRS.GEOM_SEGMENT_START_PT(s2.geom) =
(select SDO_LRS.GEOM_SEGMENT_END_PT(s.geom) as geom from geo_street s
where geo_street_id = 122978214)
but it gets the following error:
ORA-22901: cannot compare nested table or VARRAY or LOB attributes of an object type
Any Ideas?1. to compare geometry to be equal you should use appropriate function (SDO_GEOM.RELATE http://download.oracle.com/docs/html/B14255_01/sdo_objgeom.htm#sthref1561) or operators (sdo_relate http://download.oracle.com/docs/html/B14255_01/sdo_operat.htm#i78531) with specific mask EQUAL.
2. to filter down the resultset in first place you can use the operator SDO_RELATE with mask TOUCH as this will return already the set of lines sharing endpoints, but will also include lines touching eachother not at endpoints (endpoint intersecting the otherone's interior)
something like
select geo_street_id from geo_street s2, geo_street s
where
s.geo_street_id = 122978214
AND
sdo_relate(s2.geom, s.geom,'mask=touch') = 'TRUE'
AND
sdo_geom.relate(SDO_LRS.GEOM_SEGMENT_START_PT(s2.geom),
'EQUAL',
SDO_LRS.GEOM_SEGMENT_END_PT(s.geom),0.005)='EQUAL'
3. if you would do this for the full table, an SDO_JOIN (http://download.oracle.com/docs/html/B14255_01/sdo_operat.htm#BGEDJIBF) might be more appropriate.
4. you might also consider 4 cases:
start = start
start = end
end = start
end = end
5. alternative would be to take only the endpoints of your selected geometry and perform a touch with the edges. using the sdo_util.APPEND on the startpoint en endpoint of your geometry will return a multipoint. although there might some specific cases that this would not return respected result I think
something like:
select geo_street_id from geo_street s2, geo_street s
where
s.geo_street_id = 122978214
AND
sdo_relate(s2.geom,
SDO_UTIL.APPEND(
SDO_LRS.GEOM_SEGMENT_START_PT(s.geom),
SDO_LRS.GEOM_SEGMENT_END_PT(s.geom)
,'mask=touch') = 'TRUE'
Let us know how it works.
Luc -
I would like to have the ending times shown on my monthly calendar. As of now, it only shows the start time. The end times show up on the weekly calendar, but I don't want to print from the weekly view.
Hi,
I see two issues,
1. the url is not correct for the image, www.mountjay.com/Home/MountJayDesign.jpg
2. meta property should go in to head section, at the moment, it is under body (if you insert the code as html). go to page properties-> Metadata-> head. Paste this here, and check the site again,
Please let me know if you have any other query. -
System should calculate the UPC/EAN Number automatically
Can we add the UPC calculator to SAP, MM01 so the system can calculate the ending checkdigit for us? Currently when we need to calculate the ending checkdigit for upc codes we go to an online site, key the number, calculate the ending digit, copy and paste into MM01. Can this calculation be added to MM01, Basic Data 1, EAN/UPC field?
If we key the 14 digit upc ending in 0, the system message can then tell us what the corrected digit should be or change it automatically for us. Currently the message says "the EAN xxx has an incorrect checkdigit"
example temp upc-key 55000011564120 and the message should say "ending digit should be 6" or the system can change to 0 to a 6 for us.
example real upc-00036000915450 and the message should say "ending digit should be 7" or the system can change to 7 for us.
We have to key the zero on the end or the system adds a leading zero up front (to make the full 14 digits) and just accepts.
Website we use to calculate the ending digits is http://www.gs1.org/barcodes/support/check_digit_calculator
Please help me in solving this scenario.....
Marc.Hi Mark,
For this scenario you will need to add custom code for automatic calculation of Check digit and thus modifying EAN/UPC no. entered by you to a correct EAN/UPC no.
However as soon as we enter EAN/UPC( with wrong check digit) no in basic data 1 tab we get an error u201CThe EAN 36000915450 has an incorrect check digitu201D. And it seems that in between entry of EAN/UPC and error message there is no customer exit/BADI is coming in which we could have written our custom code to generate check digit and correct EAN/UPC.
So an option is that if you are uploading multiple materials you can use BDC to upload all such materials and there you will have the possibility to correct the EAN/UPC using ABAP custom code before submitting it to MM01 screen.
Regards,
Rajwin. -
I received a 'pop up' asking if I wanted to update the software in my iPhone. As I always accept these messages to keep my phone up-to-date, I accepted.
A long (25minute) process started, but at the end of it, the process "crashed" saying an unknown error had been encountered!.NOTHING has changed with my computer of my iPhone, so I say this is an Apple problem. I cannot start or use my phone now - all that shows on the screen is the iTunes logo and a connectivity graphic - see attached photoHi Kalaivani Krish18,
If you are having issues with your iPhone attempting to update, you may want to try the troubleshooting steps in this article -
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/TS1275
Thanks for using Apple Support Communities.
Best,
Brett L -
Crystal Reports prompt single value variable from BEX
Hi,
after upgrade to BO 4.1 SP2 Patch 3 the prompt from BEX variable in CR doesn't work.
After investigation the issue is happened for variables containing more than 9 values.
Bex Setting: Variable -> Details -> Variable Represents -> Single value
Variable which shows Jan-Dec
The issue happens only on CR file stored in BO server in Cr design time it works fine.
Is the bug known? Is there any solution?
HaraldYep.
Now tell me how you want to show that Prompt @ WebI report level.
My problem is that in WebI selection screen we get list of date values from the info provider instead of Calendar prompt
where user can enter the values directly. Exactly, i didn't get this??
@Prompt:
You have flexibility to show options like:
Mono/Multi: User can select Single value or Multiple.
BW Variable: Same we have (Single/Multiple)
Free/Constrained: User can Enter his/her value directly or No change option.
BW Variable: By defalut you will get this, once you made it to Optional input.
Persistent/Not_Persistent: Refreshed report has to show last selected value means use Persistent otherwise Not_P.
By seeing the Prompt syntax , I can say your Variable is after Customer Exit, Correct??
Workaround for your Problem is:
<FILTER KEY="ZV_DATE"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Date (Previous Day)','A','Date\LovDate (Previous Day)Base',mono,primary_key)"/></CONDITION></FILTER>
You have to remove that Date class and objects from prompt syntax. Because of that it showing up LOV's not calendar.
Like:
<FILTER KEY="ZV_DATE"><CONDITION OPERATORCONDITION="Equal"><CONSTANT TECH_NAME="@Prompt('Date (Previous Day)','A',',mono,primary_key)"/></CONDITION></FILTER>
Why, It should be blank??
Because Date needs no class\object to show up, by default you will get Calendar on the fly.
Hope you got my point.
Thank You!! -
Calculate single value as ranked number function does not apply in CR
Hi everybody,
I built up a query with the SAP BEx Query designer. For one key figure I enabled the function "Calculate single values" as ranked list. So the query has the following result.
Instead of...
Score
1220
2032
2390
2389
...I got...
Score
1
2
4
3
Unfortunately when importing the query to Crystal Reports Crystal is just importing the key figure itself - the ranked list does not exist... so the output is the same as in the first example.
I tried to rebuild the formula with crystal means using the Rank function but I failed...
Can anybody provide a workaround for me?
Is there another way as using the formula workbench?
Best regards,
SebastianHi Ingo and everybody,
I used now the following function using the Nth largest function:
If nthlargest(1, {TECHNAME_OF_QUERY.[Measures]-[9XU9YT56S6PRL7DR80I3DK9RA]})
= {TECHNAME_OF_QUERY.[Measures]-[9XU9YT56S6PRL7DR80I3DK9RA]} then "1"
else if nthlargest(2, {TECHNAME_OF_QUERY.[Measures]-[9XU9YT56S6PRL7DR80I3DK9RA]})
= {TECHNAME_OF_QUERY.[Measures]-[9XU9YT56S6PRL7DR80I3DK9RA]} then "2"
else if nthlargest(3, {TECHNAME_OF_QUERY.[Measures]-[9XU9YT56S6PRL7DR80I3DK9RA]})
= {TECHNAME_OF_QUERY.[Measures]-[9XU9YT56S6PRL7DR80I3DK9RA]} then "3"
else if nthlargest(4, {TECHNAME_OF_QUERY.[Measures]-[9XU9YT56S6PRL7DR80I3DK9RA]})
= {TECHNAME_OF_QUERY.[Measures]-[9XU9YT56S6PRL7DR80I3DK9RA]} then "4"
else if nthlargest(20, {TECHNAME_OF_QUERY.[Measures]-[9XU9YT56S6PRL7DR80I3DK9RA]})
= {TECHNAME_OF_QUERY.[Measures]-[9XU9YT56S6PRL7DR80I3DK9RA]} then "20"
The formula is not very handsome and will fail, if the number of records exceeds...
Are there any alternatives?
And: Is there a possibility to change the field name, because those clumsy field names cause that the whole formula is almost unreadable. Or is the only way to build subreports?
Regards,
Sebastian
Maybe you are looking for
-
How to hide prompts panel for WebI documents opened in PDF via openDocument
I am linking to a WebI document via openDocument call with sOutputFormat=P. The report opens in PDF format but within another browser window with top panel and left prompts panel. I tried to set different Web Intelligence Interactive settings in CMC
-
So now I would like to import somehow all of my music from my I-phone into my I-tunes. I've managed to import the purchases, but can't see how to import my cds from my I-phone. Does anyone know how to do this? Thanks.
-
What happened to English definitions for Japanese words?
I have an iPhone 4S. When I was using iOS 5.1.1 I was able to hold my finger on a Japanese word in an email message and buttons would pop up, one of which said "define." When I touched that button I would see the definition in English as well as in
-
None of the selected updates could be installed. You don't have permission
I am trying to update my MacMini from 10.7.3 to 10.7.4 and I am not able to. The user account I am trying to do it from is an admin account. I currently have 4 other updates and I am not able to install any of them and they are listed below. Airpor
-
Automator hangs when i try to mount a disk image
any ideas why this happens? theres nothing wrong with the image