Single workbench request for CONSUMER PROXY in crm 7.0.
Hi all ,
I have a problem related to "consumer proxy" in sap crm 7.0 release. In our system , we have several proxies (existing) for consuming inter system web services (WSDL's) which were generated from SE80 , client proxies, wizard.
As we know , at the very first time of creation , the workbench request holds both the structure , class and object of the proxy ,but if afterwards , the proxy is regenarated for changed structure in WSDL , then that workbench request only holds the regeneration request , doesnt hold the base structure.
In our case , in those old proxies , there are so many requests .in some of it , many cross object requests are there , so we are facing problems to transport these proxies to a blank client(newly created).
So my question is
IS THERE ANY WAY TO CREATE ONLY ONE WORKBENCH REQUEST (MIGHT BE FROM SE80) FOR THOSE EXISTING PROXIES , THAT THEY HOLD THE STRUCTURE AND THE CHANGED STRUCTURE ALSO FOR INDIVIDUAL.
THANKS IN ADVANCE.
ARNAB MUKHERJEE
INTEGRATION DEVELOPER.
Hi,
Refer the following to get the understanding the Equipment download to CRM.
You define the default settings for replicating equipment in the IMG activity: Customer Relationship
Management -> Master Data -> Installed Base -> Replication of Equipment from SAP R/3 Customer
Service -> Define Default Settings for the Equipment Replication.
For more information about the integration of different systems, see the SAP Library under mySAP
Customer Relationship Management -> Architecture and Technology -> Business Integration -> CRM
Middleware.
The Business Add-In : Business Add-In: Equipment Upload (CRM_EQUI_LOAD) can be used to
flexibly enhance the data transfer and validation in SAP CRM. The Add-In offers comprehensive options
for influencing the mapping between equipment and individual objects
Also refer to the following notes:
1. Note 627279 - Serial number & configuration download
2. Note 637173 - Equipment download/delta synchronization
Hope it helps.
Regards,
Rajiv
Similar Messages
-
Error in Logical port for Consumer proxy in SOAMANAGER
HI Experts,
While creating Logical port for Consumer proxy in SOAMANAGER I am facing problem
"SRT Framework exception: Uninstantiated object "subject sidl service" in method IF_SRT_WSP_CONFIG_SIDL~CREATE_CLNT_CFG_FROM_WSDL_D of class CL_SRT_WSP_CONFIG_SIDL ".
Kindly suggest.Hi Milan,
this kind of error occurs when there is no service and end point description in the WSDL of provider who's service you are trying to consume using Consumer Proxy.
Just open the provider's WSDL URL that you have given while creating Logical port for the consumer proxy and check if service and end point exists there.
Thanks
Sunil Singh -
Find workbench request for existing report
Hi
Someone created an Report for me in order to develop some new functionalities.i have to transport it now in the test system but i do not know how i can find the workbench request for it or how i can save it in another workbench request.
thanksHi Seba ,
You can find the workbench request for the report by displaying the report and following this path in the menubar.
Utilities > version > version management.
If you want to add this request into another request goto SE01 and there you will find the icon for adding the objects for your request.
Regards,
Anuj -
Error while creating logical port for Consumer Proxy in SOAMANGER
Hi,
While creating logical port for my consumer proxy in SOAMANGER, I am getting the error shown below
SRT Framework exception: HTTP: Current user does not have the required authorization to access the HTTP destination
I have searched in the forums but none of the answers helped me.
I have specifed my PI user ID and password and the user has the followwing roles assigned to it.
SAP_BC_WEBSERVICE_SERVICE_USER
SAP_BC_WEBSERVICE_ADMIN_TEC
SAP_BC_WEBSERVICE_CONSUMER
SAP_BC_WEBSERVICE_ADMIN
Current user in the error message refers to the PI user that i have specified or the user with which i have logged in the backend ABAP system?
Please help me reslove this issue.
Thanks and regards
Sreehari NambiarHi,
Please add the following roles as well.
SAP_BC_WEBSERVICE_ADMIN_BIZ
SAP_BC_WEBSERVICE_DEBUGGER
SAP_BC_WEBSERVICE_OBSERVER
Also make sure that you are doing the role comparison after adding all SAP* roles in your profile.
Let me know if this works?
Thanks,
Sridhar -
Example wsdl and logical port for consumer proxy anyone ?
Hi,
Could please somebody give me an example of external WSDL file and logcial port created for the WSDL file in SOAMANAGER ?
I need to create manually logical port for my consumer proxy and I am missing something because my logical port is not active.
Any example is more than welcome.
I need to know how to populate fields manually on the following tabs based on the info in a WSDL file:
Consumer Security Additional Information Web Service Addressing Messaging Transport settings Message Attachments Operation specifi
Thanks and Regards
Agnieszka
The message, I am getting, when creating logical port is:
Operation 'SrtFmStatefulTf' not found [NS: 'urn:sap-com:document:sap:soap:functions:mc-style']
I think that maybe something is wrong with my wsdl.
Edited by: Agnieszka Domanska on Nov 17, 2010 5:41 PMHi Milan,
this kind of error occurs when there is no service and end point description in the WSDL of provider who's service you are trying to consume using Consumer Proxy.
Just open the provider's WSDL URL that you have given while creating Logical port for the consumer proxy and check if service and end point exists there.
Thanks
Sunil Singh -
RFFOEDI1 how to generate a single spool request for payment advices
Hello,
We are using RFFOEDI1 to create payment idocs to send to the bank and also create payment advices. We have multiple payment methods that we using during a single payment run. When we run F110, the system creates the payment advices as a separate spool request for each payment method in the payment run. The users would like to see all the payment advices in a single spool request, regardless of the payment method. Does anyone know if SAP is capable of this?
Thanks,
MarkWe are on ECC 6.0, patch level 14.
Thanks,
Mark -
Creating single spool request for printing all shop floor papers
Hello PP Gurus,
We are printing shop floor papers at the time of releasing production order using txn CO02. It creates individual spool request for printing different shop floor papers in the same orders . eg Pick list, goods receipt list etc.
Is it possible to do the cofiguration setting to create only one spool request for all the different SF papers belong to same order.? If yes, please let me know the steps for customising this.
Thanks for your help in advance.
Regards & Thanks
Rajesh D.In transaction OPK8, in forms uncheck the 'New List' check box for the List.
Regards
Ramanujan -
Workbench Request for changing the Analysis Authorizations Switch in SPRO
Hi Gurus,
While changing the Analysis Authorizations Switch in DEV(SPRO), its asking to create a work bench request.
so it means after creating a work bench request should we transport that particular work bench request to QA.
Please help with some suggestion.
Regards
Padmaja.Just to add to this... the same way you need to transport a role up the stack, you have to transport AA object up the stack.
Check out this Wiki
https://wiki.sdn.sap.com/wiki/display/BI/HowtotranportroleandAAtogetherinBI
Regards,
Zaheer -
Hi,
I accidentally released a workbench request for Asset Accounting in R/3. I have tried numorously to delete the request even in R/3. I now have an error when I try to change a query. Is there any way that a request can be deleted/changed after it is released?
Regards,
AdriHi Adri,
I'm not sure how can we back the changes from the target system. (it depends on version management and high complex issues)
And I sugget you to release a corrective request for the previous released request.
To capture, follow the process as you did before.
Create a new request in SE09.
To this request, assign the package associated to your query in BEx transport in Transport Connection (RSA1)
Hope this Helps! Assign pts if its useful!
Regards
GSK -
Create a change request for multiple customers from spreadsheet
Hello Experts,
1.We have a spreadsheet with 100's of Customer data maintained in it , can we create a change request by downloading data from spreadsheet directly instead of manually entering the data in the CR. Also can we create a single change request for multiple Create customers.
2.Can we create CR's automatically , lets say we have 100's of customer data loaded into MDG hub by Data Services using DEBMAS Idoc , can this create automatic CR's , is this possible.
Thanks.Dear Collins,
1.We have a spreadsheet with 100's of Customer data maintained in it , can we create a change request by downloading data from spreadsheet directly instead of manually entering the data in the CR. Also can we create a single change request for multiple Create customers.
Answer:there are various options are available in MDG to process multiple material as shown below
you can down load the customers using file down load funcationality and same change,upload the customers using the file Upload process.
you can create a single CR for muntiple customers options are shown below.
2..Can we create CR's automatically , lets say we have 100's of customer data loaded into MDG hub by Data Services using DEBMAS Idoc , can this create automatic CR's , is this possible.
Answer:Yes you can create CR automatically using DTIMPORT tcode and some configuration needs to be done further reading go to the link SAP Master Data Governance - SAP Library
regards
shankar -
Rejecting IPSec tunnel: no matching crypto map entry for remote proxy
Hi!
I have already search for this but didn't get an exact answer I'm looking for so I try asking it again (if there is the same question).
I'm in process of migrating some VPN tunnels with from a Cisco router to an ASA, everything will keep the same but just the peering IP address. However, some of the tunnel was being torn down since it request for a proxy doesn't match the one configured on our side. And the remote peer said there is no such issue on the previous platform, but now they need to reset the tunnel from time to time.
Apr 18 2013 07:29:10 asa002 : %ASA-3-713061: Group = 192.168.1.226, IP = 192.168.1.226, Rejecting IPSec tunnel: no matching crypto map entry for remote proxy 192.168.1.226/255.255.255.255/0/0 local proxy 10.10.9.81/255.255.255.255/0/0 on interface outside
Apr 18 2013 07:29:10 asa002 : %ASA-3-713902: Group = 192.168.1.226, IP = 192.168.1.226, QM FSM error (P2 struct &0x745e9150, mess id 0x8d7ad777)!
Apr 18 2013 07:29:10 asa002 : %ASA-3-713902: Group = 192.168.1.226, IP = 192.168.1.226, Removing peer from correlator table failed, no match!
The remote peer said they did not change the proxy id on their side so it is possibly the old platform will just not setting up the SA without torn down the tunnel while the ASA on the new platform will torn down if there is any mismatch.
Anyway I have requested the remote side to remove those unmatched entried to avoid the tunnel being torn down, but if there any configuration that is related to this issue? i.e. Just bring up the SA with matched addresses and ignore others, instead of torn down the tunnel.
Thanks!!
//CodyAre you trying to send traffic destined towards the internet from 172.16.0.0/20 via this ASA as well? why? are you inspecting those traffic before being sent out to the internet?
If so, this end also needs to be configured with "any" as well --> crypto ACL needs to mirror image.
access-list outside_1_cryptomap extended permit ip any 172.16.0.0 255.255.240.0
Then you also need NAT on the outside interface, otherwise, traffic from 172.16.0.0/20 is not PATed to a public IP, and won't be able to reach the internet:
nat (outside) 1 172.16.0.0 255.255.240.0 -
How to Assign Logical port for a standar Consumer proxy
Hello,
I'm working with a SAP application creating a WS Connector that ask me for the following data:
- Class name:
- Logical Port name:
As far as I have read SAP delivers for this application an example implementation for the following web service: ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In with the /BCV/CL_SIN_WS_BOM class.
And the help also says that We can find the example implementation delivered by SAP for the Web service ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In in the package /BCV/SIN_PRX, under Service Consumer /BCV/CO_PRODUCTION_BILL_OF_MAT
In se80 transaction under /BCV/SIN_PRX package I can find /BCV/CO_PRODUCTION_BILL_OF_MATERIAL consumer proxy.
As far as I know, I just need to assign a Logical port to this proxy.
So, I go to soamanager transaction under "Service-Administration" --> "Single Service Configuration" and find this Consumer proxy. Then, under Configuration tab I select "Create logical port" option but I need to fill an URL for WSDL access.
Where can I find this URL? I think that I need to provide de WSDL URL (end point) of the ProductionBillOfMaterialVariantBasicDataByMaterialAndPlantQueryResponse_In Web Service but I can't find it on the soa manager. Or maybe I need to implement a WS by my own WB using the /BCV/CL_SIN_WS_BOM class?
I appreciate if someone could help me with these SOA concepts.
Thanks in advance,
Abigail.Hi Abigal,
In SOAMANAGER , u can configure the logical port in 3 ways first it by WSDL and second by manually and third by PI.
1. WSDL based : URL will automatically determined using WSDL file.
2. MANUAlly : in this , we have to provide the URL .
Thanks
jitendra -
How to create the multiple spool requests for a single report.
Hi gurus,
I have one requirement to be completed , i need to send the out put of the report via mail in pdf format. for that what i did was, iam executing report in background and creating spool request and converting it to pdf and sending the file.
now the problem is, its a customer ledger report, for each customer i need to create a new spool request and send mail to that particular customer, now my dought is how to create multiple spool requests for a single pro and how i need to go about it.
And one more question is can we create a spool request for a report which is running in online.
waiting for inputs frm gurus.Hello,
As per my knowledge for creating new spool id you will have to set
output_options-tdnewid = 'X'.
and then using
job_output_info-spoolids
create a pdf using
call function 'CONVERT_OTFSPOOLJOB_2_PDF'
Rachana. -
Prompt for transportable Workbench request
Hi experts,
I want to create a web service, and let my asp.net program call it.
I input se37 in ECD, and input zzz_yyyy_xxxx as function module, then click "create" button.
In the next step, I need input "Function group", but I have not , so I need crate one.
In the "Create Function Group" dialog, I input "Function group" and "short texst", and click "save" button. It takes me to "Create Object Directory Entry", I input "Package" ,then press "Save"button again.
Now it takes me to "Prompt for transportable Workbench request" dialog. Now I need input "Request" and "short description".
I'm confused. What do I input as "Request"?
Thanks.I am guessing you are quite new to this? It is asking you to create a transport package which can be sent to quality or production systems later on. If you do not want to do this you can click local object and it stays in development server. Otherwise you click the page icon and then type a description of the work/program you are creating. Save it and it will generate a transport package for you.
-
Pros & Cons for consuming web services in ABAP using ABAP PROXY
Hi,
Other then performence is there any other disadvantages like security,etc for consuming web services in ABAP using ABAP proxy?
I really appreciate if some one provide the more details(Pros & Cons ) regarding cosuming web services and I also want to know is there any other way to consume web services in ABAP.
Thanks.<i> is there any other way to consume web services in ABAP</i>
you can use cl_http_client class to make your program to act as http client and post the soap message too webservice. This way you dont need to generate proxy, but you should know the soap message format.
Regards
Raja
Maybe you are looking for
-
How LIPS item link the MSEG item?
Dear ALl, I have a program need to LIPS link MSEG to calculate the posting quantity.I know in MIGO,table MKPF have field saved the DN number.but not saved the item. current my program is : SELECT MKPFMBLNR MSEGERFMG MKPFXBLNR MSEGMATNR
-
Youtube audio keeps playing after I hit back button.
Hi, I've been having this issue on youtube when I hit the back button the audio from the video keeps playing, I've also noticed that it only seems to happen when the comment section gets stuck loading which is frequent even though I have a fast inter
-
"An error occured while reading from this device"
"An error occured while reading from this device" is the message I get whenever I try to sync my iPad to iTunes. The only way I can sync is to do a restore and then put everything back on it. Can anybody help?
-
Do Mac book air have virus?
I bought this Air for 1 years and i have 35.3 GB free. but My Mac book air so slow and some times app will quit by it self do Macbook have virus?
-
Im running 10.32, which with the updates i got it to 10.39. 10.34 and above has the setup assistant, is there anyway to get that setup assistant on a 10.32 installation? Could i copy the application from a 10.35 machine to my 10.32?