Find workbench request for existing report

Hi
Someone created an Report for me in order to develop some new functionalities.i have to transport it now in the test system but i do not know how i can find the workbench request for it or how i can save it in another workbench request.
thanks

Hi Seba ,
You can find the workbench request for the report by displaying the report and following this path in the menubar.
Utilities > version > version management.
If you want to add this request into another request goto SE01 and there you will find the icon for adding the objects for your request.
Regards,
Anuj

Similar Messages

Request for sample reports developed using report designer

Hi All,
Request for sample reports developed using report designer.
Thanks

Ramesh,
right now there really is no way to solve what you are looking for. There partial solutions, but you will not be able to force a page break in a dynamic report.
Here is what I have faced, and what I have come up with so far:
I have a series of reports that have the same column heading, but spread over 5 pages in a fixed structure. I need to be able to re-use the header and the general report design with 6 reports. Here is my solution:
1. Create an outline of the report. I did all the formatting by creating a report section for each page. You can force page breaks between the pages. Upgrade to patch 1502 (came out last week) and you will see some new functionality (such as fit to page, page numbers, etc).
2. Insert all you page breaks and do all the formatting.
3. Insert an infoprovider. Once in, you can just drag and drop the key figure cells into your formatted report.
4. Create additional modification for formatting as needed.
This fixes my problem (for now), but I had to do a lot of work to come up with this. Also, the latest patch (1501 and 1502) has created an issue for me - there is a null exception when I try to use a variable or a filter value in the report body - I can't save the report. I have an OSS message out, but our BASIS guys are going to be taking the lead on troubleshooting this.
The reason that you are seeing some customers on the new pages is probably because of "how the cookie falls" - they just fit that way.
I am trying to be positive and overcome the limitations that are in place right now. If my technical issue is solved, I would recommend upgrading to the new patch (1403 is the latest stable one in my opinion)
good luck
Pavel

Enhancement request for VAT Report of Customer and Vendor.

Hello SAP Gurus,
Have enhancement request for adding new fields in existing VAT report of Customer and Vendor like user id, GL account etc.
As I am fresher, can you please help me that how I need to approach. Thanks for your support.
Regards,
Saleem

Hello Saleem,
Almost all fields required for VAT reporting are available in standard tax report
S_ALR_87012357 .
You have to configure the layout from the selection screen as below
regards
pb

Change Selection criteria for existing report in Report painter

Hi Experts,
We are on 4.7, using report painter for getting reports for Cost center & Profit Center. For one of the report we have selection criteria as Cost center and cost center group, but now user want us to add new selection field as Cost element and cost element Group to same report. We have tried all the options from GR32 ->Edit-> General Selection, but we don't find cost element in Key figure listed there.
Please let us know how can we add the new field to selection criteria. We also would like to know is this is possible with existing report to add new fields or not? Is that we need to create new report for this?
Thanks in advance..
Shilpa

Shilpa-
In my opinion the best way to troubleshoot issues like this is to go to SAP delivered standard reports and see how they are setup. For example, in your case you want to add cost element and cost element group to your report. There is one standard report from SAP - Transaction :S_ALR_87013611 which has both cost center, cost center group and cost element, cost element group in the selection criteria. You can look how this report is set up, and maintain your report in a similar fashion. Atleast this way, it will give you an idea.
Go to transaction code GRR3 and under library look for report "1SIP-001". By double clicking on the row, you will see how it is maintained.
Hope this helps.
Shail

Single workbench request for CONSUMER PROXY in crm 7.0.

Hi all ,
I have a problem related to "consumer proxy" in sap crm 7.0 release. In our system , we have several proxies (existing) for consuming inter system web services (WSDL's) which were generated from SE80 , client proxies, wizard.
As we know , at the very first time of creation , the workbench request holds both the structure , class and object of the proxy ,but if afterwards , the proxy is regenarated for changed structure in WSDL , then that workbench request only holds the regeneration request , doesnt hold the base structure.
In our case , in those old proxies , there are so many requests .in some of it , many cross object requests are there , so we are facing problems to transport these proxies to a blank client(newly created).
So my question is
IS THERE ANY WAY TO CREATE ONLY ONE WORKBENCH REQUEST (MIGHT BE FROM SE80) FOR THOSE EXISTING PROXIES , THAT THEY HOLD THE STRUCTURE AND THE CHANGED STRUCTURE ALSO FOR INDIVIDUAL.
THANKS IN ADVANCE.
ARNAB MUKHERJEE
INTEGRATION DEVELOPER.

Hi,
Refer the following to get the understanding the Equipment download to CRM.
You define the default settings for replicating equipment in the IMG activity: Customer Relationship
Management -> Master Data -> Installed Base -> Replication of Equipment from SAP R/3 Customer
Service -> Define Default Settings for the Equipment Replication.
For more information about the integration of different systems, see the SAP Library under mySAP
Customer Relationship Management -> Architecture and Technology -> Business Integration -> CRM
Middleware.
The Business Add-In : Business Add-In: Equipment Upload (CRM_EQUI_LOAD) can be used to
flexibly enhance the data transfer and validation in SAP CRM. The Add-In offers comprehensive options
for influencing the mapping between equipment and individual objects
Also refer to the following notes:
1. Note 627279 - Serial number & configuration download
2. Note 637173 - Equipment download/delta synchronization
Hope it helps.
Regards,
Rajiv

2 Transport Request for a report

Hi Experts,
I am having 2 Transport requests for the same Z report (classical report).
I have transported both of them to quality on after another with different modifications in both of them.
Now i want to transport it to Production.
I want to know do i need to transport both the requests or do i need to transport only the last
Transport request to production ?
Please help <removed by moderator>.
Edited by: Thomas Zloch on Jun 16, 2011 10:33 AM

Hi,
As per SAP Best practice there shouldnt be any floating TRs in Quality system which are not moved to Production. Which means all the transports which move from Dev to Quality should be moved to Production. If there is any unwanted change which is moved due to a TR, then a correction request should be created & released to subsequent systems.
Hence in your case move both the TRs in the same sequence to Production.
Thanks,
Best regards,
Prashant

Replace Report Model with another Report Model for existing reports

Hi All,
I have a report model on which few reports depends and for some reasons I want create a similar report model and repoint all existing reports to new report model. When I am trying to this I get below error. Please help.
An error has occurred during report processing. (rsProcessingAborted)
Semantic query compilation failed: e EmptySemanticQuery The SemanticQuery does not contain any Groupings or MeasureGroups. SemanticQuery must contain at least one of these elements. This typically occurs because the user does not have permission to the items
referenced by the query or the items referenced by the query have been deleted in the underlying model. (SemanticQuery ''). (rsSemanticQueryEngineError)
Thanks,
Jithender

The reports that do work do not use an alias for the table/view name and the ones that do NOT work do use an alias.<br/>
<br/>
I went into the "Database Expert..." screen and modified the alias to the actual name of the view. This resets all the fields as well so they are no longer using the alias either. The data now gets returned properly.<br/>
<br/>
I still need to go into each report and modify them but at least I do not have to recreated all the reports.

Creation of spool request for a report without selection-screen.

Hi Experts ,
I need to create a spool request for ALV Grid report which is not having any selection-screen , after pressing F8 it will directly display the ALV Grid out put.
Can any one help me how to run the above report in background which is not having selection-screen?
Thank you & Regards.
Rajasekhar.P

HI,
At transaction SE38 click Program -> Execute -> Background.
Regards
Sudheer

Attempt to assign data set as datasource for existing report

There must be something stupid I am missing.
1) Created a report with Crystal Reports 2011
2) It queries a table in a SQL 2008 database
3) The internal select statement is
SELECT "CUSTOMER"."rname", "CUSTOMER"."radd", "CUSTOMER"."radd2", "CUSTOMER"."rcity", "CUSTOMER"."rprov", "CUSTOMER"."rpostal", "CUSTOMER"."rcountry"
FROM   "Data"."dbo"."CUSTOMER" "CUSTOMER"
ORDER BY "CUSTOMER"."rname"
4) Now I am attempting to use the report in Visual Basic 2010 but using a data set as the source
5) Following examples I have looked at this is the code
Private Sub CustomerCrystalReport2frm_Load(sender As System.Object, e As System.EventArgs) Handles MyBase.Load
        ' Define connection information
        Dim ConnectionInfo As New ConnectionInfo
        ConnectionInfo.ServerName = "TEST7\TEST7"
        ConnectionInfo.DatabaseName = "Data"
        ConnectionInfo.UserID = "Master"
        ConnectionInfo.Password = "MasterPassword"
        ' Load the existing report
        Dim rd As ReportDocument = New ReportDocument
        rd.Load(Application.StartupPath & "\Crystal Reports\DGVCustomerListing.rpt")
        SetDBLogonForReport(ConnectionInfo, rd) ' Set the report table connections
        ' This shows the report has loaded the records using the internal select statement (18305 records)
        Debug.Print(" Report Document Records=" & rd.Rows.Count)
        ' Create the data set with the records I want the report to use
        Dim ReportInfo As DataSet = New DataSet()    ' To hold data to pass to the report
        Dim SQLSelect As String = "select * FROM Data.dbo.Customer where rname LIKE 'z%' order by rname"
        ReportInfo = FillDataSet(SQLSelect, "ReportData")   ' Fill the data set to pass to the report
        ' This shows the data set contains the expected records (57 records)
        Debug.Print(" Data Set Records=" & ReportInfo.Tables("ReportData").Rows.Count)
        ' Change the source of the report
        rd.SetDataSource(ReportInfo)
        ' This changing the source had no effect records still (18305 records)
        Debug.Print(" Report Document Records=" & rd.Rows.Count)
        CrystalReportViewer1.ReportSource = rd ' Bind report document to crystal report viewer
    End Sub
    Private Sub SetDBLogonForReport(ByVal ConnectionInfo As ConnectionInfo, ByVal ReportDocument As ReportDocument)
        Dim Tables As Tables = ReportDocument.Database.Tables
        For Each table As CrystalDecisions.CrystalReports.Engine.Table In Tables
            Dim TableLogOnInfo As TableLogOnInfo = table.LogOnInfo
            TableLogOnInfo.ConnectionInfo = ConnectionInfo
            table.ApplyLogOnInfo(TableLogOnInfo)
        Next
    End Sub
end Sub
6) The report is appearing in the viewer with 18305 records
Any help would be appreciated

Setting the report table connections caused the report to fill with data.
At this point I seemed unable to reset the datasource.
Also the set data source needed further clearification.
The simplified following code works:
Dim rd As ReportDocument = New ReportDocument
rd.Load(Application.StartupPath & "\Crystal Reports\DGVCustomerListing.rpt")
' Create the data set with the records I want the report to use
Dim ReportInfo As DataSet = New DataSet()    ' To hold data to pass to the report
Dim SQLSelect As String = "select * FROM Data.dbo.Customer where rname LIKE 'z%' order by rname"
ReportInfo = FillDataSet(SQLSelect, "ReportData")   ' Fill the data set to pass to the report
' Change the source of the report
rd.SetDataSource(ReportInfo.Tables("ReportData"))
CrystalReportViewer1.ReportSource = rd ' Bind report document to crystal report viewer

How to unlock the request for a report and add the same query to new reques

hi,
how to unlock the request for a and add the same query to new reques

You can unlock in SE03 tcode.
Goto tcode SE01, give the transport number --> display --> double click on the transport --> in the next screen select all the elements --> delete --> save.
To attach it to another transport, In RSA1, click on transport connection> Choose Object types> query elements --> here you can find your query/ or you can search, which you can drag to right and attach to the transport (using truck button).

Error after migration to Crystal Reports 12 for existing reports

Hi,
We had reports written using Crystal Reports Version 8.5. These reports were not modified for a long time. Recently, we had migrated to Crystal Reports 12 (2008). Some of the these existing reports were modified using the Crystal Reports 2008 designer. After installing our application (we ship Merge Module of Crystal Reports 12 i.e. 2008 which gets installed in GAC)
1) If we create new reports in 2008 designer and try to view these reports, it works as expected without any issue(s).
2 ) However, if these modified reports are tried to be viewed, there is an error which states "Database Logon Failed".
Details:
CrystalDecisions.CrystalReports.Engine.LogOnException     {"Database logon failed."}
ErrorID     CrystalDecisions.CrystalReports.Engine.EngineExceptionErrorID.LogOnFailed
InnerException     {"Database logon failed."}
Message      "Database logon failed."
Source     "CrystalDecisions.ReportAppServer.DataSetConversion"
Stack Trace        at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)
   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)
TargetSite     {Boolean ThrowDotNetException(System.Exception)}
Also, it is worth to note that if we try to view these modified reports from any environment which has both Crystal Reports 10 and Crystal Reports 12 in GAC, then these reports work as expected.
P.S. We have mechanism in application's code to reset the database connections when any report is being viewed using ReportDocument class' method.
From the above scenario I believe issue is specific to migration to Crystal Reports 12 (2008). Any help /workaround to solve this problem will be highly appreciated.

Make sure you have the latest SP for CR 2008 installed;
https://smpdl.sap-ag.de/~sapidp/012002523100009038092009E/cr2008win_sp2.exe
Ensure you are deploying SP 2 runtime;
MSM
https://smpdl.sap-ag.de/~sapidp/012002523100009159092009E/cr2008sp2_mm.zip
MSI
https://smpdl.sap-ag.de/~sapidp/012002523100009159002009E/cr2008sp2_redistinstall.zip
If that does not help;
1) Do these reports work in the designer?
2) What database are you using and what is the connection type?
3) Compare the dlls loading on the systems where this app works (environment which has both Crystal Reports 10 and Crystal Reports 12 in GAC) and a system that is giving you the error. Use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
4) Open the reports in the designer and look at the properties in the Database menu -> Set Datasource Location. Check to see if there are any differences between the two reports.
5) If there is a subreport in the report that causes the issue, remove it and see if the report works without the subreport.
Ludek

How do I set-up my Dataset to pull data for Service Requests for a report

I am using SQL Server 2012 Report Builder 3.0.
I have my Data Source added - DWDataMart
I want to build my Dataset to query and find a very specific item. Basically I am creating a daily report that will show what each "team" or Support Group (AD Object) Closed that day. He also wants the ability to open it by date, so if he misses
a day he can get it later.
I am totally new to this report building and only got this far by following a guide on a blog, but he used incident Reports in his example, and I do not know what objects to query for service requests.
Thanks for any information you can provide.

First, you will need to get the support group ID's in the warehouse before you can run reports for them. I found that putting these queries in their own stored procedure was a better path.
select IR.IncidentTierQueuesId, IR.IncidentTierQueuesValue
from dbo.IncidentTierQueues as IR
where IR.IncidentTierQueuesId != 0
select SR.ServiceRequestSupportGroupId, SR.ServiceRequestSupportGroupValue
from dbo.ServiceRequestSupportGroup as SR
where sr.ServiceRequestSupportGroupId != 0
Enter the the support group ID's into your work item query.
Incident information is in dbo.IncidentDim and Service Requests are found in dbo.ServiceRequestDim. Both incidents and service requests link to relationship data through dbo.WorkItemDim. You can INNER JOIN on BaseManagedEntityId to link the incident
or service request to the workitem entry and from there to the Assigned Users, Affected Users, or Affected Configuration Items. Each relationship has it's own separate fact views.
If you poke about in the tables, you will find it pretty easy to pull back all sorts of information from the data warehouse.

HowTo find item usage in existing reports

Hello,
I would like to cleanup an existing and grown universe. I went to hiding the fields/Items I'm planning to remove.
Furthermore I would like to check, whether these "deprecated" fields/items are still being used in any report, before removing them from the universe. Thus, avoiding broken reports.
Is there any way to check reports for the usage of a certain universe field/item. I mean another way than to open each report and check the universe query.
Thanks for your help
Thomas

Janke,
there are a couple of ways to go about finding out about objects. One way would be through the SDK, however, a certain level of expertise in writing VBA code is required (you can read more on this from the following link: http://devlibrary.businessobjects.com/BusinessObjectsXIR2/en/devsuite.htm).
Another way to find out about objects is possilbe through Auditor. If you have Auditor installed and have turned on certain auditing events on your services then using the data accumulated in Auditor may also be another avenue for finding out about stuff.
Thanks,
John

Finding Application Comments for a report

Hello,
Can anyone tell me what table or view I can access "Application Comments". I did a search on that an didn't find anything in this forum.
I'm creating an application where other applications can be launched from while maintaining authentication (all in same workspace).
I have the list of apex_applications.application_name as links in the report, but would like to add a description of the application in an adjacent column to the link. I thought the application comments would be a good feild to use if I can find it and join to the apex_applications view.
I'm using APEX 4.1.0.00.32
Thanks,
Wayne

Found by looking through C:\apex41\builder\f4000.sql for the create/view comments pages (p1236).
select * from APEX_040100.WWV_FLOW_APP_COMMENTS;I've included a consolidated view of all application comments to the 4.2 wishlist
Apex 4.2 wish list
I didn't realise this information wasn't in the apex_dictionary already.

How to switch Datasource from OLE to ODBC for existing report

I have a report that must be deployed to an app that requires all datasource connections to be ODBC. I do not have access to the source for this app since it is from/developed by a 3rd party.
My report has 3 commands (Command, Command_1, Command_2) against an OLE datasource. I cannot figure out how to switch these over from OLE to my ODBC datasource and still maintain all the existing Crystal internal references to fields for the content, formulas, etc.
Thank you in advance for your assistance!

Hi Marvin
There is a SAP note that helps us to update the Datasource location. The Note # is 1215594.
Link to the Note is as given below:
https://bcp.wdf.sap.corp/sap(bD1lbiZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=690076005F006D006F00640065003D003000300031002600690076005F007300610070006E006F007400650073005F006E0075006D006200650072003D0030003000300031003200310035003500390034002600
Hope this helps.
Thanks

Find workbench request for existing report

Similar Messages

Maybe you are looking for