SIP- h323 in a AS5850 - Not able to send h323 calls coming from a SIP Phone

Dear All!
I have an AS5850 configured as a SIP Gateway and as a H323 Gateway. I'm planning to use this equipment as an interconnection point between PSTN,SIP and H323.
I already have a functional H323 Network with ISDN trunks to the pstn and it is working fine. I added SIP configuration to the AS5850 in order to be able to route calls out to the PSTN or H323 remote ends coming from a SIP Phone registered with a third-party SIP Proxy.
When the calls coming from the SIP Phone goes to a PSTN destination the calls completes properly, but i am having problems trying to send calls coming from the SIP phone to a remote h323 gateway(also cisco)
Attached is my configuration and the error i'm getting in my cdr. It seems that the "ext" number of the phone is being used as destination string in the last call leg, but i'm not sure.
Please Help!
dial-peer voice 100 pots
application session
destination-pattern 5T
port 2/6:D
forward-digits all
dial-peer voice 102 pots
application session
destination-pattern 044T
port 2/6:D
forward-digits all
dial-peer voice 103 voip
application session
incoming called-number 001T
destination-pattern 001T
session protocol sipv2
session target ipv4:20X.21X.17X.1X
tech-prefix 10511
sip-ua
sip-server ipv4:20X.6X.14X.18X
CDR ERROR:
.Mar 24 2004 18:31:42.620 GMT: %VOIPAAA-5-VOIP_CALL_HISTORY: CallLegType 2, ConnectionId 9F74CE17 7D2A11D8 82A09B41 D2C3D418, SetupTime .18:31:42.470 GMT Wed Mar 24 2004, ***PeerAddress 2006***, PeerSubAddress , DisconnectCause 3 , DisconnectText no route to destination (3), ConnectTime .18:31:42.620 GMT Wed Mar 24 2004, DisconnectTime .18:31:42.620 GMT Wed Mar 24 2004, CallOrigin 2, ChargedUnits 0, InfoType 2, TransmitPackets 0, TransmitBytes 0, ReceivePackets 0, ReceiveBytes 0
Thanks.
Attached you can find the debug ccsip messages output.

There are 2 solutions here.
1. Use of SIP/H.323 Signalling Gateway as the protocol convertor. Search google will yield heaps of hits on this subject. Product available both commercial and open source, trial, etc. Using this method means that the SIP End Point will communicate with H.323 End Point without going out the PSTN. I believe this is what you want to achieve in the long term. You are trying the AS5xxx as the protocol convertor for you, which it will not work. A call flow will be something like SIP IP Phone->SIP Server->SIP-to-H.323 Gateway->H.323 Gatekeeper->H.323 End Point. Of couse there is a SIP server that do the protocol convertor in the same box but the functionality is the still the same. Performance and concurrent call setup differ from products to products. Going for this solution would require you to find such products and test it on the your network.
2. If you do not wish to try on Soluton 1, this solution is a workaround way by not getting device but using the existing equipment that you have right now. Onto whether this good long term solution for depends on what you want to achieve both in term of commercially and technically. A call flow will be SIP End Point->SIP Server->Voice Gateway (AS5xxx)->PSTN Switch(ISDN/PRI)->Voice Gateway->H.323 Gatekeeper>H.323 End Point. The key is the Voice session must traverse the ISDN link. In other words your dial pattern must be setup is such as way that will go out thru the dial peer pots to pstn switch then come back to another dial-peer pots. I am not saying this is the most efficient way of doing it, I merely suggesting a workable way to achieve your desired goal without soluton 1.
Hopes you get better understanding now.
Thanks
SSng

Similar Messages

I am not being able to send pictures via Bluetooth from my Samsung phone to my iPad mini and vice versa. So is there a setting or is it a compatibility issue ? Please help

I am not being able to send pictures via Bluetooth from my Samsung phone to my iPad mini and vice versa. So is there a setting or is it a compatibility issue ? Please help

You can also use a wireless flash drive.
http://www.sandisk.com/products/wireless/flash-drive/

I am having ipad4 and my network is Vodafone, myself is not able to send,receive calls sms

I am having ipad4 and my network is Vodafone, myself is not able to send,receive calls sms

Correct, as the iPad has no native phone or SMS capability.

Not able to send message - http post from MII 12.1.4.53 to PI 7.1

Hi ,
Question
u2022     Is there any configuration to set up in MII and PI to do posting to PI as a web service? If YES, please guide.
Situation
u2022     We are with MII version 12.1.4.53 and trying to send message through http post to PI 7.1 server.
u2022     We are getting the following error HTTP 500 Internal Error Issue.
u2022     However we are able to post messages from SOAPUI through the same URL and with the MII system which is running on version 12.1.6.91 and 12.1.9.116
u2022     HTTP Response received as below points to PI Configuration issue.
Error
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>Server Error</faultstring>
      <detail>
        <s:SystemError xmlns:s="http://sap.com/xi/WebService/xi2.0">
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
com.sap.aii.af.service.cpa.CPAObjectNotFoundException: Couldn't retrieve inbound binding for the given P/S/A values: FP=senderService;TP=;FS=null;TS=;AN=null;ANS=null;
thanks
Rajesh

Hi Anudeep,
The question isNOT ABOUT the format of the URL which MII should use.
Using the same URL we are able to post the message from other MII versions with in the landscape( MII version 12.1.6 and MII version12.1.9) and through SOAP UI.
500 Internal server error Problem arises when the message is sent through the same URL from MII 12,1.4 Build(53) to PI 7.1 ( we tried https Post, XI Webservice, WebService action blocks)
Question:
Are thre any configuration settings specific to MII version12.1.4 Build 53 which needds to be set in MII to communicate to PI 7.1.
Thanks
Rajesh

Outlook Calendar invite - Not able to send from exchange server.

Hi,
I am not able to send outlook calendar invite from exchange server. But if i installed outlook on my local machine/server it works fine. Below code the i used to build calendar invite for your reference.
public static void sendOutlookInvitationViaICSFile1(EAppointmentMail objApptEmail)
try
log.Info("Invite Started");
Microsoft.Office.Interop.Outlook.Application apptApp = new Microsoft.Office.Interop.Outlook.Application();
Microsoft.Office.Interop.Outlook.AppointmentItem agendaMeeting = apptApp.CreateItem(Microsoft.Office.Interop.Outlook.OlItemType.olAppointmentItem);
DateTime venueDate = Convert.ToDateTime(objApptEmail.VenueDate);
string formatedVenueDate = venueDate.Year.ToString() + "/" + venueDate.Month.ToString() + "/" + venueDate.Day.ToString();
DateTime from = Convert.ToDateTime(formatedVenueDate + " " + objApptEmail.FromTime);
DateTime to = Convert.ToDateTime(formatedVenueDate + " " + objApptEmail.ToTime);
System.Net.Mime.ContentType typeHTML = new System.Net.Mime.ContentType("text/html");
//Create the Body in HTML format
string strBodyText = "Type:Single Meeting\r\nOrganizer: {0}\r\nStart Time:{1}\r\nEnd Time:{2}\r\nTime Zone:{3}\r\nLocation: {4}\r\n\r\n\r\n\r\n{5}";
strBodyText = string.Format(strBodyText, objApptEmail.Email, from.ToLongDateString() + " " + from.ToLongTimeString(),
to + " " + to, System.TimeZone.CurrentTimeZone.StandardName,
objApptEmail.Location, objApptEmail.Body);
if (agendaMeeting != null)
Console.WriteLine("started");
agendaMeeting.MeetingStatus =
Microsoft.Office.Interop.Outlook.OlMeetingStatus.olMeeting;
agendaMeeting.Location = objApptEmail.Location;
agendaMeeting.Subject = objApptEmail.Subject;
agendaMeeting.Body = strBodyText;
agendaMeeting.Start = from;
agendaMeeting.End = to;
Microsoft.Office.Interop.Outlook.Recipient recipient = agendaMeeting.Recipients.Add(objApptEmail.Email);
recipient.Type = (int)Microsoft.Office.Interop.Outlook.OlMeetingRecipientType.olRequired;
((Microsoft.Office.Interop.Outlook._AppointmentItem)agendaMeeting).Send();
log.Info("Invite Successfully End");
Console.WriteLine("End");
catch (Exception ex)
log.Info("Error: " + ex.Message.ToString());
Console.WriteLine("Error: " + ex.Message.ToString());
In exchange server/ not outlook installed server, i am getting below error.
"Retrieving the COM class factory for component with CLSID {0006F03A-0000-0000-C000-000000000046} failed due to the following error: 80040154 Class not registered (Exception from HRESULT: 0x80040154 (REGDB_E_CLASSNOTREG))"
Help me to send calendar invite without installing outlook on the specified server. Please do the needful.

Hi
It is probably that the stuff you doing is for outlook and because outlook is not installed it cannot find the classes.
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

I am not able to send my slideshow from iphoto because I entered the wrong username (e-mail address) by accident. I cant see how to edit it. Can anyone help me?

I am not able to send my slide show from iPhoto because I entered the wrong user name (e-mail address) by accident and I dont see how to edit it. Can anyone help me out?

Try here:
iTunes Store: My credit card's security code or zip code does not match my bank's records
Then try contacting iTunes
Apple - Support - iTunes - Contact Us

Notification mailer is not able to send mails to Outside domain i.e gmail

Hi All,
We are in 12.1.3 EBS application with 11.1.0.7 DB on Aix 64 bit platform:
resently we configured notification mailer with out any issues
But the issue is notifications are delivered to with in the domain itself but not to outside the domain i.e gmail and yahoo
SMTP server host name is owa.craftsmanautomation.com the same we used to configure the Notification mailer
Even we verified from os level using telnet utility as follows:
$ telnet owa.craftsmanautomation.com 25
Trying...
Connected to 192.168.5.8.
Escape character is '^]'.
220 Capl-cas01.CRAFTSMAN.LOCAL Microsoft ESMTP MAIL Service ready at Thu, 12 Jul 2012 14:03:47 +0530
EHLO CAPL-PROD
250-Capl-cas01.CRAFTSMAN.LOCAL Hello [192.168.5.12]
250-SIZE
250-PIPELINING
250-DSN
250-ENHANCEDSTATUSCODES
250-STARTTLS
250-X-ANONYMOUSTLS
250-AUTH NTLM
250-X-EXPS GSSAPI NTLM
250-8BITMIME
250-BINARYMIME
250-CHUNKING
250-XEXCH50
250-XRDST
250 XSHADOW
MAIL FROM: [email protected]
250 2.1.0 Sender OK
RCPT TO: [email protected]
250 2.1.5 Recipient OK
DATA
354 Start mail input; end with <CRLF>.<CRLF>
Subject: Test message
Test message body
250 2.6.0 <[email protected]> [InternalId=85753] Queued mail for delivery
quit
221 2.0.0 Service closing transmission channel
Connection closed.
In the above command in place of FROM and TO mail-id's if we use any personal mail-id's getting error message as "Unable to Relay".Please suggest is there any changes we need to done at SMTP server Level or OS level or Application Level.
Thanks in Advance

925263 wrote:
Hi Hussein,
Thanks Alot for your reply.
Currently we changed the SMTP Server(mail.craftsmanautomation.com).we used anoth SMTP server to configure Notification Mailer.Because previous one(owa.craftsmanautomation.com) is not able to send mail's to outside domains.
But in this case we got the below error message while testing.Below error message we captured from the output file of the script Oracle Workflow ATG Support: R12 Java Mailer Setup Diagnostic Test.
ERROR
[Nov 10, 2012 1:32:45 PM GMT+05:30]:1352534565017:-1:-1:capl-prod.craftsmanautomation.com:192.168.5.13:-1:-1:1:20420:SYSADMIN(0):-1:Thread[outboundThreadGroup1,5,outboundThreadGroup]:192.168.5.13:84096:1352529863628:11:ERROR:[SVC-GSM-WFMLRSVC-110812-10006 : oracle.apps.fnd.wf.mailer.SMTPOutboundProcessor.send(Message)]:Problem encountered when sending to {[[WFTEST <[email protected]>]]} -> javax.mail.SendFailedException: Invalid Addresses;
nested exception is:
class javax.mail.SendFailedException: 554 5.7.1 <[email protected]>: Sender address rejected: Access denied
Please see these docs.
Email Not Received javax.mail.SendFailedException: Invalid Addresses [ID 876835.1]
Workflow Notification Mailer Unable to Send E-Mail Notifications [ID 374804.1]
Unable to Email Proposal Documents to an 'External Address' [ID 1126223.1]
How to address Email Center: Outbox Processor Error: Invalid Addresses [ID 1399427.1]
Thanks,
Hussein

I am not able to make International calls from iPhone 5s

I got this new iphone 5s as a gift a week days ago, and It was working all great for 2-3 days. But from last 4days i AM not able to make international calls
Whenever I dial, I can't hear any ring going on and all I can hear is my own voice reverting back to me. Moreoever I am being charged for every call I make. I tried restarting my device, Also by connecting to itunes to find if any Update is needed but it says my iOS7 is recent no updates needed.
Urgent help needed
Thanks in advance.

A call is a call so far as the phone is concerned. Internation or across the street, it doesn't diferentiate between them.
Contact your carrier.

Not able to send any SMS

Hi All,
I am not able to send any SMS from my blackberry device from past one day. I have checked all possible things including my network, the message settings etc. I am able to choose contacts and type messages but when I am trying to send it it gets hanged , the track pad doesnot send it...even if I try clicking the green tab for options to choose,it doesnot wrk...as a result I have to press back, once i press back i see the typed message highlighted in green in my message box and if i click on it it goes away.The sent outbox doesnot show that the message is sent also when i enquire with the recipient they inform that message is not delivered. Could anybody advice why this can happen? also is this due to some virus? If so can the scan and restore back my curve with difault settings....reuqest you all to please please reply back soonnnnnnnnnnnnnn.......My curve model is 8520, carrier VODAFONE and OS v5.0..
Thanks ,
Prasun
Solved!
Go to Solution.

You need to turn off the media sync in the Desktop Software, so that it does not occur immediately and only when you click to initiate it.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Not able to make any call with my lumia 710

Not able to make any call with my lumia 710 though other then call everything is working fine. I chacked my SIM in other phone, i there phone i can make calls. Whats wrong with my phone?

hi
i am using nokia lumia since last 6 months. i am having aitel connection. till few days back i was able to make phone calls however now phone calls are immediately getting ended. i m able to send sms, receive calls and use intenel..problem presisits only with receiving call..
suggest me a way out..plz..

Not able to read the wsdl file from server Premature EOF encounter

Hi All,
I am facing issue while accessing a web Service from server. Here is the clear view about it.
I created a simple SyncBpel process in a composite and deployed in to the server and it is working fine. Later i created a new Asyn bpel process in a composite and in the external reference i dragged a web Service and imported the wsdl url from server of the SyncBpel and wired the Asynbpel process to webserive .
Now here i am facing peculiar behavior which i am not able to trace it out.
1) For the first time when i import the url of syncBpel from the server i am not facing any error and it is working fine as expected but when i close the Jdeveloper and open it i am not able to user the web Service and it is saying as "Not able to read the wsdl file from server Premature EOF encounter"
2)When i close and open the Jdeveloper i can see the url of the wsdl which imported in webserver is changing from http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL to http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/BPELsync.wsdl
3)when I open and see the url http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel/bpelsync_client_ep?WSDL I can see the soap address as *<soap:address location="http://stcfmw03.satyam.com:8021/soa-infra/services/Tarak/synchronousBpel!1.0*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c/bpelsync_client_ep"/>*
I don’t understand why the soap end contains “*soa_5cfb8416-c106-40a2-a53b-9054bbe04b9c” and this kind of url for soap address is coming to all the bpel process which I am deploying in the server.
I checked the in Jdeveloper where webproxy is uncheck and the server is also up but still I am facing issue of reading the error.
Can someone please help in resolving the issue.
I am using SOA 11g 11.1.1.5 and Jdeveloper 11.1.1.5
Many thanks.
Tarak
Edited by: user11896572 on Jan 17, 2012 5:22 PM

Hi,
Setting default from the jdeveloper -
During composite deployment from Jdeveloper (wizard driven), you will be given an option to choose the version of the composite and there will also be an option for you to choose if the composite needs to be deployed as default.
Setting default from the em console -
After deploying a composite, login to the em console and click on the composite that you want to set as default, and you will find a tab - "Set as Default". please note that this tab will not be seen, if the composite is already set as default.
Refer -
http://docs.oracle.com/cd/E12839_01/integration.1111/e10226/soacompapp_mang.htm
8.2 Managing the State of Deployed SOA Composite Applications
Thanks

I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered

I am not able to send messages to multiple person from my iphone 5s after updating to ios 8.1.2. It shows message not delievered

Hi waqaskhan91,
Thank you for visiting Apple Support Communities.
If you're not able to send text or iMessages to certain contacts after updating your iPhone, start with the troubleshooting tips in this article:
iOS: Troubleshooting Messages - Apple Support
If you only see this behavior with a few contacts, you may want to try these steps first:
If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
If the issue occurs with a specific contact or contacts, delete and recreate the contact from the Contacts app. Send a new message to the contact.
Best Regards,
Jeremy

I'm not able to send emails with mail.ru. Receiving and reading is not a problem. When I create a email with mail.ru its not possible to send it although its stored in my mail.ru account as "still to be send". What can it be??

I'm not able to send emails with mail.ru. Receiving is not a problem. Creating a mail is also not a problem and the mail will be stored at mail.ru as still to be send, only problem is its not possible to send. I noticed the buttons for sending change colour when used but they don't perform. What it is?

Don't know what changed, but all of a sudden able to send emails by mail.ru ...... sorry for bothering.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another.

My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
Thanks.

go to the settings and turn off imessage
but that don't change the issue that you will never be able to facetime eachtoher
the appleID is really meant as the handle that identify you it was not meant to be shared
but can see that people may want to do not buy apps more then once

I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

I have a iPhone 5 and I am not able to toggle between the show my caller Id option on and off. How can I do that ??? It always shows greyed out and also because of which I am not able to make outgoing calls. So please help

Not all carriers allow that to be set using preferences in the phone. Contact your carrier.

SIP- h323 in a AS5850 - Not able to send h323 calls coming from a SIP Phone

Similar Messages

Maybe you are looking for