"Site-Based" Boot Media Works / "Dynamic" Boot Media Gives "MP Location Returned an Empty Site Code"

Good Morning Guys -
This morning we had some issues testing OSD builds. We used a USB drive we made into boot media a few days ago to boot up an "Unknown Computer."  After clicking the initial "Next," we got the error
0x80004005 instead of no task sequences being listed.
I tried re-creating the media (Dynamic), but still got the same error.  After research, I re-created the media once more with the same settings - except - used "Site-Based" instead of "Dynamic" and it worked as I am now
displayed a list of task sequences to run.
Why would "Site-Based" media work and "Dynamic" media not?
Below are some environment details as well as other things I examined...
Primary server is remote to location, but do have a local secondary
Boot Image Config I used on all 3 times I tried above:
          - Boot Image: Selected Image
          - Distribution Point - Selected Local Secondary
          - Management Point - Selected Primary Server (only option)
IP was retrieved on machine via DHCP. After opening a command prompt, I could ping both primary and secondary servers
Verified machine's IP (via DHCP) was in a boundary (It's Subnet was entered). Boundary was assigned to the proper local secondary
In the log file, there was only a couple of lines which noted errors (besides PXE which we don't use)
Here is the smsts.log file just in case - names were changed for security...
Any ideas? Thank Guys!
Ben K.

We are running into the same frustrating issue. We inject our PKI ConfigMgr Client Certificate to Boot-able media as instructed on TechNet because we use HTTPS to connect to site servers. I'm only presented with the primary site server when creating
either a Dynamic or Site based Boot CD. When we boot the CD in remote location, we get the same errors in smsts.log
I would assume that when the system boots to WinPE, it queries the main Primary Site, which then redirects the system to the appropriate secondary site or DP.
Should i have the option to select one of the secondary management points when creating the boot-able media?
-BM

Similar Messages

Unable to create working dynamic distribution list based on manager

Hi,
I am struggling to create a working dynamic distribution group. I am following the instructions at http://help.outlook.com/en-gb/140/Dd264647.aspx.
My intent is to create DDG's based on a user's manager and their job title. In my org, sales managers will typically have 3 teams reporting to them. In our AD, this would be marked by a 3-4 letter acronym in the job title field (CSO,DCO,SDCO).
I am trying to create distribution groups for use by their manager by having the manager and job title item as the filter, using the following script:
New-DynamicDistributionGroup -Name "GROUPNAME" -RecipientFilter {(RecipientType -eq 'UserMailbox') -and (manager -eq 'Managername') -and (title -eq 'ACRONYM')}
As an aside, I am unable to find if the manager object should be an alias, upn or ad object. I've tried with all with no success.
No matter what permutations of the above script I try, nothing seems to work. The group creates, but does not work at all.
Any help you can provide would be very much appreciated!

Hi Ed,
I did try that, and as it turned out, I was using the wrong powershell from the start.
The commands above are for Office 365, not on-prem Exchange 2013. Having spoken to Microsoft, it seems like the AD object for manager may not be a filterable option at all, I'm waiting to hear back.
If this can help jog anyone's mind, the commands we're looking towards now look something like this:
New-DynamicDistributionGroup -Name "testname" -Alias "testname" -IncludedRecipients "MailboxUsers,MailContacts" -OrganizationalUnit "domain.local/users" -ConditionalDepartment "Test" -RecipientContainer "domain.local"
We're still looking for a filter for manager in there, and I'll update the thread if I get anything worthy of note. Bear in mind that it's going to be difficult to settle for anything less than the manager object to filter by, as our requirements pretty
much demand it.
Thanks all.

My workbook charts are not working dynamically

Hi All,
I am displaying a chart in the workbook that will display according the query values. Once I save it, the problem is that if the values in the query change, it is not adjusting the chart accordingly.
Example, I am listing data for each month based on an order value. If the order has values only in the first 3 months of the year, the chart is showing 3 months data.
However when I change the order number and if it supposed to show data for all the months, the query data is chaging accordingly. But my chart is still showing only the first 3 months values. It is not reflecting all the periods.
Is there any settings that I can use to make the chart work dynamically...?
Any help would be greatly appreciated.
Thanks
lz70d71

in the analysis grid optoin under charts tab...you should select the chart is associated with the data provider.
Rgds
Amit

PC won't boot. MSI Gaming 7 motherboard had a debug code of 67.

PC won't boot. MSI Gaming 7 motherboard had a **debug code of 67**.
I ran Malwarebytes this morning, it found some stuff, I had it remove them and rebooted. Haven't been able to get my PC to boot since :(
When I begin booting, nothing happens at all on the monitors, the PC itself has power and it looks like it's on but I only get this error code 67 on the motherboard and that's it.
Really don't want to unseat the CPU for any reason to troubleshoot that. CPU is always a pain in the ass for me to remove and place back into a PC. lol.
Specs:
PC:
* Windows 8.1 Pro 64-bit
* Rosewill THOR V2 Case
* EVGA GeForce GTX 970 FTW Edition GPU
* Thermaltake NiC C5 CPU Cooler
* Rosewill SSD/HDD Mountaing Kit with 60mm Fan
* CORSAIR Vengeance 16GB RAM
* CORSAIR HX850i 850W Power Supply
* Intel i7-4790k CPU
* MSI Z97-Gaming 7 Motherboard
* Samsung 840 EVO 120GB SSD
* Western Digital Blue 1TB Drive x 3
Audio:
* Blue Yeti Mic
* Rode PSA1 Mic Boom Arm
* Audio-Technica ATH-M30 Headphones
Networking:
* Cisco Linksys EA4500
* Motorola SURFBoard SB6121
* CAT 6 Ethernet Cables
Peripherals & Misc:
* PS4 Controller
* Razer Naga 2014
* ASUS VS278Q-P 27" 1ms Monitor x 2
* HP 23" S2331 x1
* Logitech C920 Webcam

Quote from: Svet on 04-June-15, 22:06:26
try >>Clear CMOS Guide<< with power cord removed
Tried that, didn't work.
Unseated each RAM stick, didn't work.
Removed the CPU, cleaned off the thermal grease, reseated it, replaced grease and heatsink. Didn't work.
Literally unplugged and replugged everything in one by one and none of it fixed the problem. Still receive error code 67.
Have no damn idea what the heck is going on.

Adding Multiple files to many Sharepoint Sites based on the Sites Code (Splitting the data using a code)

Hi,
I'm pretty new to Sharepoint and wanted to ask a question to see if it can actually do what we need it to do.
We would have a top Site within a collection and under this we would have 400 sites for different sections of the business (External) Lots of teams create documents for all these sites and use the Code of the site in each document so we know what business
site its going to. For example 67890_BusinessReportMay.docx We know this document should be heading to site 67890
We have lots of services sending data to these 400 business sites. If we were to do them manually it would take most of our time to go to each site and upload the documents, even if we could do all the sites documents in 1 multiple upload. We still have
to go to each site to do it
Is there an easy answer to this? At present I have folders to match each of the 400 Sharepoint Sites and I use an Integration Services package to move all the documents into these 400 Matching folders. I do this using the Code at the start of each file name.
If it doesn't have a code its put into an error folder and reported back on.
Then I want something to automatically go through each of these folders and load them into the Sharepoint Sites document libraries.
OR
Say you have 600 files all going to the 500 sites on Sharepoint in one folder. The File contains meta data regarding the Sites Code. Using this you can split the files and automatically pull them across to the Sharepoint Sites without having to go
into each Sharepoint Site?
I'm thinking that you cant do this and I'm hoping I'm wrong. Any help would be greatly appreciated.
Debbie

Hi Debbie,
According to your description, my understanding is that you want to move the documents to different sites based on the code in the name of the files.
I recommend to create workflow and set the workflow to start when an item is created to achieve this goal.
As there is no built-in action which can move the documents cross site, we need to use the custom activity 'Copy List Item Extended' which need to be downloaded from
http://spdactivities.codeplex.com/.
Please per the steps in the link below to deploy the custom activity to SharePoint:
http://social.technet.microsoft.com/Forums/en-US/82609160-152f-461a-9a19-0e996f5a309b/sharepoint-2010-archiving-the-files-from-one-document-library-to-another-document-library-in
After that, we can create a workflow to meet the need.
Here is the detailed steps to create the workflow:
Create a column in single line of text type(called NO for example) in the library where the documents are uploaded, and input value manually in the column to store the code when uploading the documents. (We can also use workflow to extract the code from
the name of the documents if the codes are always 5 numbers.)
Create a workflow associated with the library and set the workflow to start when an item is created.
Select If current item field equals value, change the settings to be If Current Item: NO equals 67890.
Select Copy List Item Extended, change the settings to be Copy item in Current Item to list at site 67890 URL.
Select Delete Item, change the settings to be Delete Item in Current Item.
Create other conditions from step 3 to step 5 to copy the documents to different sites and delete current documents.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Web based worklist not working...

Hello,
(on wlpi 2.1 on weblogic sp2)
I've created a process that utilizes a stateless session bean. Every thing works
fine when using the fat-client worklist.
I wanted to use the web-based worklist with my process, so I did the following:
1.) Installed the %wlint_home%/samples/bpm_api/jsp/worklist.war from the weblogic
console.
2.) Tweaked the "startWeblogic.cmd" file (I'm in NT) to add the wlpi-worklist.jar
file into the classpath. (this is all in the reamde file in %wlint_Home%/samples/bpm_api/jsp/)
This works at first, as I can get to the login screen, but as soon as I log in, I
get a "Classnotfound error" saying it can't find my home interface for my session
bean.
So, I figured, "Must not be in the classpath (somehow)". I added my bean .jar file
into the classpath, and then try again. I get a different error that says "Classnotfound
error" for the EJBHelper. Same error happens on the fat client in both cases.
I can simply take out my startWeblogic classpath changes, and restart the server,
and the fat-client works again (but the jsp worklist doesn't not -- no surprise.)
Has anyone been able to get the jsp-based worklist to work with a process that uses
an EJB?
dave

I totally lost my internet connection via the router WRT54GS V6
I am connected directly into the computer from my cable modem.
I have tried everything. Upgarded firmware, factory default reset, setting the software again and again.
When I run Easylink Advisor it always reads, no internet...like I said the modem is working when plugged directly into my computer.
All proper lights are working on the router and modem.
Could the router be just be broken?
It seems to be getting worse and worse.
help please.

Can't get version based downloads to work

I am new to JNLP and trying to get version based downloads to work. I have read everything I can find, but I still seem to be missing something. My setup:
Tomcat 4.1.18 (running in JDK 1.4.0)
Java WebStart 1.2
Win 2k
files in .war
-launch.jnlp
-+1.0
|-testapp.jar
|-version.xml
-+images
|-Save.gif
-+META-INF
|-MANIFEST.MF
-+WEB-INF
|-+lib
| |-jnlp-servlet.jar
|-web.xmllaunch.jnlp
TS: 2002-04-23 19:21:05
<?xml version="1.0" encoding="UTF-8"?>
<jnlp codebase="$$codebase" href="$$name">
   <information>
      <title>ljtest 1</title>
      <vendor>Lance</vendor>
      <description>just an example</description>
      <icon href="images/Save.gif"/>
   </information>
   <resources>
      <j2se version="1.2+"/>
      <jar href="1.0/testapp.jar" version="1.0"/>
   </resources>
   <application-desc main-class="Main"/>
</jnlp>version.xml
<jnlp-versions>
   <resource>
      <pattern>
         <name>testapp.jar</name>
         <version-id>1.0</version-id>
      </pattern>
      <file>testapp.jar</file>
   </resource>
</jnlp-versions>web.xml
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
    "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
     <servlet>
        <servlet-name>JnlpDownloadServlet</servlet-name>
        <servlet-class>com.sun.javaws.servlet.JnlpDownloadServlet</servlet-class>
        <init-param>
           <param-name>logLevel</param-name>
           <param-value>DEBUG</param-value>
        </init-param>
     </servlet>
     <servlet-mapping>
        <servlet-name>JnlpDownloadServlet</servlet-name>
        <url-pattern>*.jnlp</url-pattern>
     </servlet-mapping>
</web-app>Things I have discovered (possibly in error?):
1) I do not need to include the jaxp.jar and parser.jar files because I am using JDK 1.4
2) I do not need to change my testapp.jar to testapp_V1.0.jar because I have included the the version.xml file in the 1.0 directory
I keep getting the following error in WebStart when I loadup the jnlp:
JNLPException[category: Download Error : Exception: null : LaunchDesc: null ]
     at com.sun.javaws.cache.DownloadProtocol.doDownload(Unknown Source)
     at com.sun.javaws.cache.DownloadProtocol.getDownloadSize(Unknown Source)I can get everything to work without version based downloads. Does anyone have any clue what I am doing wrong?
Lance

I found my own error. After loading up sun's reference implementation server in NetBean's debugger I noticed that it was only handling .jnlp files. Going back to the "Packaging JNLP Applications in a Web Archive" document I found my mistake. My web.xml files should have looked like this.
<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE web-app
    PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.2//EN"
    "http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>
     <servlet>
        <servlet-name>JnlpDownloadServlet</servlet-name>
        <servlet-class>com.sun.javaws.servlet.JnlpDownloadServlet</servlet-class>
        <init-param>
           <param-name>logLevel</param-name>
           <param-value>DEBUG</param-value>
        </init-param>
     </servlet>
     <servlet-mapping>
        <servlet-name>JnlpDownloadServlet</servlet-name>
        <url-pattern>*</url-pattern>
     </servlet-mapping>
</web-app>The difference being the <url-pattern> tag. It now tells the web server to handle all files not just .jnlp.
This allowed me to download version based jnlp entries. I still can't get jarDiff things to work, but I will keep banging my head against the wall till I figure that out.
Lance

Create Fieldcatalog based on internal table (dynamic)

Hi ,
Is there a way to create Create Fieldcatalog based on internal table (dynamic).
while creating fieldcat we usually many give the fields "fieldname" and "tabname".
is there a way to get the fieldname from the main table ?
Eg ..
I have i_tab as the output table. It has 3 fields "a", "b" and "c"
Now when i created fieldcat manually ( in case i cannot use fieldcat_merge FM) , i have to append 3 throws in fieldcat table.
These rows would have "a", "b" and "c".
Now i want to know if there is a way in which i can find "a" "b" and "c" fieldnames from the createdd internal tables.
i can then append the same to fieldcat.

Hi Anuj,
I created a FORM routine for this 4 or 5 years ago and made a couple of refinements. Meanwhile it has prooved as very useful.
The disadvantag is that it creates the oldfashioned field catalog for the function calls. But I already used it for OO fieldcatalog of LVC type - there is a function module for this but I do not have the name here.
You need the two forms (second called in first) to build the field catalog from any internal table that can be used for ALV display.
*&      Form ALV_FIELDCAT_FOR_ITAB
*       Feldkatalog from (arbitrary) internal Table (c) Clemens Li
*       * build field catalog from        type description
form alv_fieldcat_for_itab                                  "#EC *
tables   pt_outtab                      type table        "#EC *
changing pt_alv_fieldcat                type slis_t_fieldcat_alv."#EC *
data:
    lv_desc                               type sydes_desc,
    ls_alv_fieldcat                       type slis_fieldcat_alv,
    lv_longfield                          type text80."CRM<=R/3 fname.
field-symbols:
    <typeinfo>                            type sydes_typeinfo,
    <nameinfo>                            type sydes_nameinfo.
describe field pt_outtab into lv_desc.                    "#EC *
loop at lv_desc-types
      assigning <typeinfo>
      where not idx_name is initial
        and table_kind is initial "no entries for deep table like color
        and back                          = 1. "top-level-entries only.
    read table lv_desc-names index <typeinfo>-idx_name
      assigning <nameinfo>.
    check <nameinfo>-name                 <> 'INCLUDE'.
    ls_alv_fieldcat-fieldname             = <nameinfo>-name.
    while not <nameinfo>-continue is initial.
      add 1 to <typeinfo>-idx_name.
      read table lv_desc-names index <typeinfo>-idx_name
        assigning <nameinfo>.
      concatenate
        ls_alv_fieldcat-fieldname
        <nameinfo>-name
        into ls_alv_fieldcat-fieldname.
    endwhile." not <nameinfo>-continue IS INITIAL.
    read table lv_desc-names index <typeinfo>-idx_help_id
      assigning <nameinfo>.
    if sy-subrc                           = 0.
* Caution: Help-ID may be Tablename-Fieldname and thus longer
* than 30 Chars; ls_alv_fieldcat-rollname is 30 Chars only
      ls_alv_fieldcat-rollname            = <nameinfo>-name.
      lv_longfield                        = <nameinfo>-name.
      while not <nameinfo>-continue is initial.
        add 1 to <typeinfo>-idx_help_id.
        read table lv_desc-names index <typeinfo>-idx_help_id
          assigning <nameinfo>.
        concatenate
          lv_longfield
          <nameinfo>-name
          into lv_longfield.
      endwhile." not lv_desc-continue is initial.
* help id may be data element or <table>-<field>
      if lv_longfield ca '-'.
* get data                                type for table field
        perform get_rollname_4_tabfield
          using lv_longfield changing ls_alv_fieldcat.
      endif." lv_longfield ca '-'.
    else.
* No Help-ID: Use Fieldname as text
      ls_alv_fieldcat-seltext_s           =
      ls_alv_fieldcat-seltext_m           =
      ls_alv_fieldcat-seltext_l           =
      ls_alv_fieldcat-reptext_ddic        =
      <nameinfo>-name.
    endif." sy-subrc                      = 0.
* Starting 4.7: get edit mask
    if not <typeinfo>-idx_edit_mask is initial.
      read table lv_desc-names index <typeinfo>-idx_edit_mask
        assigning <nameinfo>.
      ls_alv_fieldcat-edit_mask           = <nameinfo>-name.
      if not <nameinfo>-continue is initial.
        add 1 to <typeinfo>-idx_edit_mask.
        read table lv_desc-names index <typeinfo>-idx_edit_mask
          assigning <nameinfo>.
        concatenate
          ls_alv_fieldcat-edit_mask
          <nameinfo>-name
          into ls_alv_fieldcat-edit_mask.
      endif." not <nameinfo>-continue IS INITIAL.
    endif." not <typeinfo>-IDX_EDIT_MASK is initial.
* assign length, output length and decimals
    ls_alv_fieldcat-intlen                = <typeinfo>-length.
    ls_alv_fieldcat-outputlen             = <typeinfo>-output_length.
    ls_alv_fieldcat-decimals_out          = <typeinfo>-decimals.
    ls_alv_fieldcat-inttype               = <typeinfo>-type.
    append ls_alv_fieldcat to pt_alv_fieldcat.
    clear: "prevent anything 2 B taken for subsequent fields
      ls_alv_fieldcat.
endloop." at lv_desc-types where not IDX_NAME is in initial.
endform.                    " ALV_FIELDCAT_FOR_ITAB
*&      Form get_rollname_4_tabfield
*       Get Data                          type for Table field
form get_rollname_4_tabfield
using    p_fname                        type text80 ""CRM<=R/3 fname
changing p_alv_fieldcat                 type slis_fieldcat_alv.
field-symbols:
    <dfies>                               type dfies.
data:
    lv_tabname                            type tabname,
     lt_dfies                             type table of dfies,
    lv_fieldname                          type fieldname.
split p_fname at '-'
    into lv_tabname lv_fieldname.
clear p_alv_fieldcat-rollname.
call function 'DDIF_FIELDINFO_GET'
    exporting
      tabname                             = lv_tabname
      fieldname                           = lv_fieldname
*   LANGU                                 = SY-LANGU
*   LFIELDNAME                            = ' '
*   ALL_TYPES                             = ' '
* IMPORTING
*   X030L_WA                              =
*   DDOBJTYPE                             =
*   DFIES_WA                              =
*   LINES_DESCR                           =
   tables
     dfies_tab                            = lt_dfies
*   FIXED_VALUES                          =
   exceptions
     not_found                            = 1
     internal_error                       = 2
     others                               = 3
if sy-subrc                             <> 0.
    message id sy-msgid                   type sy-msgty number sy-msgno
            with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
    read table   lt_dfies assigning <dfies> index 1.
    p_alv_fieldcat-rollname               = <dfies>-rollname.
* Und wenn keinerlei Twexte gepflegt sind?
    if <dfies>-reptext is initial and
       <dfies>-scrtext_s is initial and
       <dfies>-scrtext_m is initial and
       <dfies>-scrtext_l is initial.
* No Text: Use Fieldname as text
      p_alv_fieldcat-seltext_s            =
      p_alv_fieldcat-seltext_m            =
      p_alv_fieldcat-seltext_l            =
      p_alv_fieldcat-reptext_ddic         =
      p_alv_fieldcat-fieldname.
    endif." <dfies>-reptext IS INITIAL AND
endif.
endform.                    " get_rollname_4_tabfield
Regards,
Clemens

Generating the RM requirement based on the work order?

Does Oracle Disceret MFG has the provision of generating the RM requirement based on the work order?

Hi,
If you mean RM requisition as Material indent from Stores , then Yes, Component Pick Slip is the form
Regards
S

Location based wifi not working as expected

I would expect that location based wifi would either turn wifi off if not in a place with saved networks, or turn wifi on if arriving in a place with saved networks, but it does neither. I have tested this by turning wifi on when at home, then periodically checking status in places with no networks saved or open, and it's still on, and also by turning wifi off when away from home, then checking at home to see if it's turned on, and it isn't. So doesn't seem to be working either way. I have stamina mode active, and some people have said that location based wifi won't work with this.but most say works just fine, and would have expected Sony to say if different power saving options were incompatible. Always have location sensing GPS turned on. Often have mobile data off. Some have said that this is necessary for location based wifi to work, but others not, and to my way of thinking, location based wifi should turn wifi off whenever out of range of saved network, and add long as phone has some way of knowing where it is to wake up wifi, then it shouldn't matter which location modality it uses. Can anyone shed any light on this? Google's not being very helpful. Thanks

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
You do need to have data turned on and as such you must also have Stamina mode turned off for this to work sorry.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Time Based Publishing - Not Working

Hello SAP KM Gurus-
I had configured Time Based Publishing to work on our clustered portal. Everything worked fine until we went to a central instance / dialog set-up. Now Time Based Publishing no longer works and I can't seem to get it to work no matter what I do. I have so far: scheduled the job on only one instance (as per the clustering guidelines in SAP Library), turned it on with properties with the repository (and for the folder I wish to use) and have checked to make sure the service is okay in KM Configuration. However, it seems like the job never comes by to hide the documents b/c they just show up for Read users no matter what I change. As I stated before, this was working fine until we went to the new configuation.
I've checked SAP Notes with no luck. Anyone have any idea why this is not working? I'm fresh out.
Any help greatly appreciated...
Jim

Hello Anjali-
Thanks for your post. Yes, I have checked that. Here are my settings - I have Check Valid From assigned to one instance running on the Central Instance and Check Valid To assigned to the other instance (we have two instances on each server) as per the help docs. In component monitor, tbp is coming up green and the properties it is State-Ok. On the repositories, I have both tbp and properties assigned and when I enable tbp I can get the lifecycle tab for the documents. It appears as if everything is set up right. However, the read users can see the documents just fine when they shouldn't. It seems as if the Check Valid From and Check Valid To jobs just never run.
Is there anyway I can see if the jobs have run and what the schedule was? The tbp report also showing nothing... Does it look like I'm doing anything wrong above. I'm on EP 14/KM 14 by the way...
Thanks for your help-
Jim

Download notifications based on main work center and edit based on task level person responsible

Hi Experts,
My requirement is to download notifications based on main work center.The downloaded notifications contains task level person responsible.If the notification contains four task assigned to different persons.Let suppose one task is assigned to the mobile user and other three task to another user.Now the first mobile user should able to edit the task assigned to him ,but he should able to see all other task in disable mode that are assigned to other user.Iam using agentry work manager 5.3
Please help me to achieve this requirement as soon as possible.Thanks in advance.
Thanks & Regards,
Sravanthi Polu
Tags edited by: Michael Appleby

Please refer my earlier posting for Work Order related requirement similar logic can be extended even to your Notification requirement.
Also refer.
Work Order and Notification Assignment Types Supported In Work Manager 5.3
Thanks
Manju

Memory-based snap shot worker is not complted after cloning completed

Hi,
Memory-based Snap shot worker is not complted after cloning done from the production to test instance.
for the user .please advise.
1) run the gather schema stats fro MRP schema
2) compile the invlid objects
3) compile the apps schema using adadmin.
Please advise is there any solution for this isssue.
thanks
balu

Hi Hussain,
It was running from last 2:30 hrs ..and not complted it was showing running normal. thats it.
actually it completes in 30 mins in our instance. it happens after cloning done from production.
Thanks
balu

Does location based services (LBS) work for international locations (outside the USA)?

Does location based services (LBS) work for international locations (outside the USA)? For example does it work in Canada, European countries etc. Any help is appreciated.

Yes, but possibly limited to coverage of Skyhook database..
Applications that use location services also use the data from Skyhook...
Skyhook is a service that records the MAC addresses of Cell Base stations/towers and wireless access points.
Google Maps vehicles records the wireless AP data at the same time they get street view images.
There was some controversy over this - but they effectively record the location and the MAC address of any AP they find as they drive round. This gets sent to a massive database at Skyhook and is used to either locate without GPS or enhance/aid the GPS information. It's also why the location is always the road outside!
If your location/MAC relationship has not been mapped by Skyhook, Google or others - then the good news is that you can add it - although it can take a month or two at least - to work. The reason is that it depends which database is being used by Skyhook's clients..
Add your Wireless Access Point (or Wireless Router) here: http://www.skyhookwireless.com/howitworks/submit_ap.php
The main website for Skyhook is here: http://www.skyhookwireless.com
Hope that helps...!

HT4414 If I upgrade to Mountain Lion, will my Windows based apps still work or will I have to reinstall them?

If I upgrade to Mountain Lion, will my Windows based apps still work or will I need to reinstall them?

As I said, the Windows applications are running in the virtual machine, using the Windows system. It is not directed affected by upgrading Mac OS X to Mountain Lion. So you should not need to re-install anything that runs in the Windows virtual machine.
The real question is, does Parallel Desktop, which is the Mac OS X application, work properly under Mountain Lion? You should go to
http://www.parallels.com/products/desktop/
and make sure you are using the latest version that has been updated to work with Mountain Lion.

"Site-Based" Boot Media Works / "Dynamic" Boot Media Gives "MP Location Returned an Empty Site Code"

Similar Messages

Maybe you are looking for