Site Wide Design-Time?
I've got a site that uses a lot of server-side includes, because the client has a lot of redundant info all over the place. When I edit these includes in Dreamweaver, the best way to handle it is to use my stylesheets at Design-Time (a feature I just discovered...lol.) But wouldn't it be lovely to be able to apply that Design-Time file to an entire site, rather than have to apply it to each individual file? Any way to do this via extensions? And why oh why is this not a feature?
It doesn't relate to DT stylesheets per se. I just put this out there as an alternate approach. Sometimes, no style rendering is easier to work with in DW.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
Similar Messages
-
Apply Design-Time to entired site
I'm using PHP templates and dreamweaver wont show my preview
correctly. Right now I have to select each page (one by one) and
pick design time. I have my sites defined in DW so you would think
I could just set a designtime stylesheet to the whole site or
highlight multiple files and apply them.
However that doestn work. I have to do each page one by one
with design-time. Is there a solution to this?Here's a link to an extension that will allow you to do that:
http://www.communitymx.com/abstract.cfm?CID=61265
Note that this extension is not free, but it's well worth the
cost of $5.
HTH,
Randy
> I'm using PHP templates and dreamweaver wont show my
preview correctly. Right
> now I have to select each page (one by one) and pick
design time. I have my
> sites defined in DW so you would think I could just set
a designtime stylesheet
> to the whole site or highlight multiple files and apply
them.
>
> However that doestn work. I have to do each page one by
one with design-time. -
Where to start? - writing an extension to apply design-time Stylesheets to entire site
Can anyone tell me what type of extension I need, and point me at the right part of the API for creating an extension for CS5 (/CS5.5) to make design-time stylesheets apply to an entire site please?
Thanks in advance
PeterPaul,
Yes, those documents and books about Extensions for DW8 are
still very
relevant. The only that has changed since then are a few new
APIs.
This is the best Adobe forum for asking questions. Welcome
aboard! :)
Randy
> I want to learn how to write a dreamweaver CS4
extension, but the only
> material I can seem to find that provides step by step
instructions for how to
> start out is for Dreamweaver 8.
>
> I found the API references for CS4 (
>
http://help.adobe.com/en_US/Dreamweaver/10.0_Extending/index.html
) but it
> seems to me that while this is an excellent resource for
people who already
> know how to write extensions, it is to general in some
areas, and then too
> specific in other areas to start out with.
>
> Are there any forums or newsgroups that are devoted to
helping people when
> they have specific questions? Or are there any tutorials
for helping people do
> something like "Write your first dreamweaver extension"?
>
> I also saw there was a book available for people looking
to write a
> Dreamweaver 8 extension, would the content of that book
still be relevant now
> with CS4? (
http://www.peachpit.com/store/product.aspx?isbn=0321395409 -
Error while opening site studio designer
Hi,
We are getting error while opening the site studio Desiner in Server. It gives unexpected error with three options, view log, close and continue, then program just get closed.
Yesterday we have upgraded site studio component and designer -
Site studio designer from 10gR3(10.1.3.3.2) to 10gR3(10.1.3.5.0)
Site studio component from 7.7.2.405 to 8.0.0.645
This issue is not coming for the user who have installed the site studio component and designer but rest all user are facing the problem while opening site studio designer in the server.
Below mentioned is the scanrio -
A) All the users(UserA,UserB,UserC) have the admin access to the server.This installation has been done by UserA. UserA only able to open the SS-D and remaining all are getting error
B) The issue is on the same machine on which site studio designer is installed.
C) Multiple users are using same SS-Designer
D) Error occured as soon as the userB,UserC went to select site studio designer from start menu on the same server and getting the same error.
E) UserB who is also having admin access has tried this option of un install and re-install SS-D,but he is also not able to open the SS-D. Still only UserA is able to access the SS-D.
Any kind of resolution much appriciated.
Thanks and Regards,
SumitHi,
Thanks for the suggestions, Yes userB and userC are able to edit regedit.
I have tried to install SS-D with userB and userC but then too both of them getting the same error, but userA is able to open SS-D.
Error --
<?xml version="1.0" encoding="utf-8"?>
<?xml-stylesheet type="text/xsl" href="SSDesignerLogFile.xsl"?>
<LOGFILE>
<LOG SOURCE="Site Studio Designer" TYPE="INFO" DATE="02/02/11" TIME="05:39:32">Site Studio Designer Logfile Initialized</LOG>
<LOG SOURCE="SSLoggerEngine" TYPE="WARNING" DATE="02/02/11" TIME="05:39:32">Loaded language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3(10.1.3.5.0)\resources\en\SSLoggerEngineRes.dll)</LOG>
<LOG SOURCE="SSCommonMfc" TYPE="WARNING" DATE="02/02/11" TIME="05:39:32">Failed to load language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3(10.1.3.5.0)\resources\en\BCGCBProRes.dll)</LOG>
<LOG SOURCE="SSCommonMfc" TYPE="WARNING" DATE="02/02/11" TIME="05:39:32">Loaded language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3(10.1.3.5.0)\resources\en\SSCommonMfcRes.dll)</LOG>
<LOG SOURCE="Site Studio Designer" TYPE="WARNING" DATE="02/02/11" TIME="05:39:32">Loaded language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3(10.1.3.5.0)\resources\en\SiteStudioDesignerRes.dll)</LOG>
<LOG SOURCE="SSHtmlTidy Control" TYPE="WARNING" DATE="02/02/11" TIME="05:39:34">Loaded language specific resource library (C:\Program Files\Oracle\Universal Content Management\Site Studio\Designer\10gR3(10.1.3.5.0)\resources\en\SSHtmlTidyRes.dll)</LOG>
</LOGFILE>
Regards,
Sumit -
Ver 4: Still no support for Includes or Design Time Stylesheets?
Wow...well, without either of these I can't make use of this
product. I guess I'm confused at what types of users this product
may be marketed toward, although with the amount of focus put on
Blogs and Blogging and lack of focus on requests already made in
this forum for some time I'm getting a better idea. Hey, if they
want to "dumb this down" and make it a price point product that
purposely sits lower on the totem pole than Dreamweaver, then I
think that ought to be made more clear in the marketing materials.
I guess what's frustrating is that it's touted that it "uses the
Dreamweaver HTML Engine" but can't implement a feature like Design
Time Stylesheets? Would this put it too close to Dreamweaver in the
product line? I certainly don't think so but if it did implement
such a feature it would increase the demographic that could make
use of such a great product as many users are not going to rewrite
Includes OUT of their existing sites just to be able to use it.
Most intermediate to advanced designers will almost always,
and have been taught, to use includes to minimize page changes in
multiple places...it's such a common thing to do. But unless an
included page can be edited inline I have no way to turn my users
loose with this app. It seems reasonable to implement Design Time
Stylesheets like Dreamweaver does in which case, the users could
edit the included page directly and at least see it like it should
look with formatting which they can't do now because of the lack of
an applied stylesheet when opening the include file directly.
Do they expect that once we've written a site using includes
we should have our content providers use Dreamweaver? I don't know
about the rest of you but that's asking for a heck of a lot of
trouble turning non-designer/developers loose with
Dreamweaver...even using Templates.
Sorry for the rant, I'm just a bit frustrated as I really
need an app that can let me make use of "Content Providers" in our
company. And don't get me wrong, I'm a long time Macromedia/Adobe
supporter...just hoped something would happen with v4 that didn't
and was pretty sure it would based on user input on this and other
forums.
If anyone has ideas on workarounds for this problem I'd love
to hear!
Thx,
MikeHi. I'm going to reopen this thread instead of starting a new
one. Maybe someone here can help me figure out how Contribute can
solve my client's editing woes.
His site is built in ColdFusion, with template information
that's stored in the database for each page. Currently this is what
happens, simplified.
1. User requests /foo.cfm
2. Database looks up header, footer, and template to use for
/foo.cfm, or the page can use "no template" in which case
whatever's in the page gets put between the header and footer.
3. The template or the page will contain one or more
"editable regions", to use a Dreamweaver term. These blocks of HTML
are pulled out of the database, and can currently be edited within
the CMS by a browser-based WYSWYG editor.
The problem is, the WYSIWYG editor in question isn't up to
the task. Contribute seems to be, but I can't figure out how to fit
it into a workflow compatible with this site!
We don't use Dreamweaver and from what I've seen Dreamweaver
templates aren't going to work in this application. It seems that
if you make a change to the template, Dreamweaver has to go and
update all 800 pages that use the template ... ??!? ... if so,
lame.
I don't mind pulling out all the HTML content snippets from
the database and making a "database" on the filesystem of files
that can be edited in Contribute. No problem. One of these snippets
may be a "contact us" box or something that's used on 100 pages
throughout the site, so I'm not going to put stuff like that
separately on every page.
If I do this, though, my snippets when I open them to edit
them in Contribute are missing their CSS. This is because the CSS
is set up in the header file, which is not included in the snippet
HTML, obviously. The snippets also won't have the header and footer
navigation and stuff, but I can live with that.
How can I get the CSS to show up for my client when he edits
the HTML snippets?
The only solution I can think of is to put a stylesheet
include into every snippet, and then pull that out with a regular
expression from EVERY include at runtime whenever I display that
HTML to the end user. Talk about a gross, ugly, non-extensible
hack. Please tell me there's a better way...
Thanks for reading,
- Andrew. -
Design-time *code*... is it possible?
We all know of design-time CSS files. But is there such a
thing as
design-time code?
Reason I'm asking is that on one site, files are assembled
via includes.
Header, title, content, and footer. 4 files being included
into one. Except
Header and Footer are really two sides of the same coin :
various divs and
tables are opened in Header and then closed in Footer (title
and content are
self-sufficient).
Would it be possible for me to have "design-time" code that
closes the tags
opened in Header so I can work on the file *without*
re-assembling it with
Footer? (and vice versa) because right now... if I need to
edit Header or
Footer, I first need to copy both into one file, work on it
there, then
re-save them separately for inclusion as "header" and
"footer".The other option would have been to create a php file that
takes a template
and inserts the content into it via the url, such as
.com/parser.php?file=content.html
But a programmer friend of mine told me that was the wrong
way to do it,
that it would slow things down. Although I'm not sure how 3-4
includes is
any less slow than the quoted method.
"David Powers" <[email protected]> wrote in message
news:et90va$ich$[email protected]..
> Reese J. wrote:
>> We all know of design-time CSS files. But is there
such a thing as
>> design-time code?
>
> No.
>
>> Header and Footer are really two sides of the same
coin : various divs
>> and tables are opened in Header and then closed in
Footer (title and
>> content are self-sufficient).
>
> The most practical way to use includes is to create
pages that make sense
> even if the include is missing. That way, the page
doesn't collapse like a
> pack of cards if one of the includes is accidentally
deleted or corrupted.
> Opening a tag in one include and closing it in another
is a disaster
> waiting to happen. -
Let's say one has a style sheet for detail pages on one's website, say "detail.css", designed for desktop monitors.
Now one creates a sitewide media query file, e.g., mq-detail.css
which looks like this to refer to the tablet and phone style sheets:
/* detail-tablet */
@import url("detail-tab.css") only screen and (min-width:321px) and (max-width:768px);
/* detail-phone */
@import url("detail-phone.css") only screen and (max-width:320px);
Then how does one refer to the desktop style sheet? If I simply use "detail.css" with a minimum width of 769px, then some browsers like IE8 will not reference any style sheet.
Would this line in mq-detail.css work:
<!--[if lt IE 9]
<link href="style_sheets/detail.css" rel="stylesheet" media="screen">
<!endif]-->
If the screen width is >768 px, will "detail.css" be used for all browsers: that is the goal.cma cma wrote:
I understand the concept but it is unclear how to implement it. In what files does one put these two lines?
<link rel="stylesheet" href="css/global.css" type="text/css" media="screen"/>
<link rel="stylesheet" href="css/mobile.css" type="text/css" media="screen"/>
The links above go on every page of my site as they are needed. The global.css for desktop AND mobile. The mobile.css contains the media queries css which are used to change the css in the global.css file specifically for mobile devices.
cma cma wrote:
David Powers' excellent tutorial talks about a number of mobile query issues but he does not discuss using the Site-wide media query file. Do you and Nancy dispense with that step and put all your media queries and CSS links in every html page?
There isn't any site wide media query file. That would be just a general css file that both desktop and mobile share, in my view. You only change what is necessary for mobile devices in a dedicated media queries file or you can include them in the general css file.
cma cma wrote:
He also says:
To ensure a level playing field with all devices that support media queries, just add the following line to the <head> of each web page: #
<meta name="viewport" content="width=device-width, initial-scale=1">
Yes, that line of code needs to be present on all the website pages.
cma cma wrote:
Then Mr. Powers says to use "only"
media="only screen and (min-width: 401px) and (max-width: 600px)"
Havent read through the tutorial so can't really comment on that one only to say everyone has slightly different approaches to building pages. I tend to look at my design and see where it starts to break down then use media query break points based on that rather than any view port width.
cma cma wrote:
and finally:
use an Internet Explorer conditional comment to serve a special set of rules to older versions of IE like this: #
<!--[if lt IE 9 & !IEMobile]> <link href="iestyles.css" rel="stylesheet" type="text/css"> <![endif]-->
You can use an IE conditional comment IF that is whats needed to get IE8 to work with your design....depends what css you are using. The more advanced techniques will not work in older browsers. -
Site Wide Media Query option is ghosted
Hello,
I am new to Dreamweaver CS6 and I am trying to set up media queries for my website design.
When I got to Modify>Media Queries> the dialog box has the option for either "Site Weide" or "This Document". However the "Site Wide" option is ghosted and I can't select it. I have tried a variety of different HTML documents (HTML 4 and HTML 5) but nothing works.
Can anyone help me solve this problem?
Thank You.Have you defined your site in DW? You should do that in order for 'Site-Wide' media-query to work. Here's a walkthrough that you can follow to define your site in DW: http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/
Yes - the video is for CS5 and 5.5. But it is no different to CS6 too! -
I'm having a strange one. I'm using CF 9.0, and I have a Site-wide Error Handler set up, with the relative path set correctly.When run-time errors occur, it is calling the template exactly as expected, except for one thing.
In addition to the error template (which shows a nice user-friendly page), I am also getting the default ColdFusion error information following.
So...error occurs, it is throwing to the error template as expected, but then also pushing out the default error page.
It does not do this on CF7 with identical code, so I am thinking that perhaps there is a setting on CF9 Administator that I'm not clicking. But search as I might, I only see the Site-wide Error Handler field.
Any suggestions? This is driving me batty.ianskinner wrote:
What do you get if you turn on "Robust Exception Information"?
You are presuming that since your test error is a DSN error and this extra message is about a DSN error, that they are the same error. That is an unproven correlation. Or at least you have not show us the proof.
Robust Exception Information is enabled on the Cold Fusion Administrator. I don't know why it wasn't showing earlier, but now when I run the test page I get the following:
The web site you are accessing has experienced an unexpected error.
Please contact the website administrator.
The following information is meant for the website developer for debugging purposes.
Error Occurred While Processing Request
Datasource doesNotExist could not be found.
The error occurred in \\srv238\wwwroot\rjr\errorhandling\cferror_test.cfm: line 11
9 : This query calls a non-existent datasource, triggering an error to be handled. --->
10 :
11 : <cfquery name="testQuery" datasource="doesNotExist">
12 : select * from nothing
13 : </cfquery>
DATASOURCE
doesNotExist
Resources: Check the ColdFusion documentation to verify that you are using the correct syntax.
Search the Knowledge Base to find a solution to your problem.
Browser
Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; GTB6.3; .NET CLR 1.1.4322; InfoPath.2; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648; .NET CLR 3.5.21022; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; MS-RTC EA 2)
Remote Address
172.21.10.142
Referrer
Date/Time
30-Dec-09 01:21 PM
Stack Trace (click to expand) -
Design Time Control Shortcut Information Disappearing
I am using a visible Design Time Control Shortcut in RoboHelp
X5. It calls up a video (.swf). I type the path into the field
called "Program to run when shortcut is activated". I can save it
and build the .chm file and the video link works. But when I close
Robohelp and then open it back up, the path I typed in disappears
and the link is broken. Why is this happening?Hi Brook21679
You are linking to a .SWF. Your use of a control seems to
indicate the .SWF will remain outside the .CHM, right? If so, you
may need to script things using JavaScript to construct your path
on the fly. I have a topic on my site that describes this. You may
view it by
clicking
here.
Otherwise, I'd simply add the .SWF to my baggage files list
and link from there.
Sincerely... Rick -
Site-Wide Error Handler Filepath
My error handler page is located at C:\Inetpub\wwwroot\portal\error_handler.cfm but cfadmin (for CF 8) wants a relative path. I've tried:
C:\Inetpub\wwwroot\portal\error_handler.cfm
Inetpub\wwwroot\portal\error_handler.cfm
wwwroot\portal\error_handler.cfm
portal\error_handler.cfm
error_handler.cfm
and http://www.hostname.com/portal/error_handler.cfm
Each time is says the specified file does not exist.
What should the filepath be relative to?
Thanks!It has to be relative to a ColdFusion mapping OR the ColdFusion web root. The latter has always been the most reliable for me.
It is a little known feature of ColdFusion that it often has two web roots for which it will search for cfml templates. The web root defined for the web server such as c:\inetpub\wwwroot\ that you apparently have. But before searching the web server web root it will search the ColdFusion web root, that on my multi-home flavor of ColdFusion is c:\JRun4\servers\cfusion\cfusion-ear\cfusion-war\. It is this latter directory that I put my site wide error and missing template handler fiels. Then I just place the file names in the appropiate fields in the administrator.
If you have a default backslash (\) mapping to your web root defined in the ColdFusion administrator, you should be able to input something like "\portal\error_handler.cfm" but I have always had difficulty getting this way to work. -
How to create a drop down box values on design time?
Hello,
I have a drop down box that I would like to edit on design time to have the valus 1 to 10.
Is it possible to doo it on design it or do I have to create a loop in the code to do that?See go to LocalDictionary->Data Type-> SimpleType Right Click and create a Simple Type giving some Package Name
Once u have created
There u will see Enumeration Tab and give Key Value Pairs by pressing New Button
Now Create a Context Attr and at Type property select that three dots
Then go to Dictionary Simple Type and select the Package u have given
then select the Simple type u have created
Then assign the context Attr to the UI Element
Message was edited by: krish kanth -
Report does not print exactly same as it appears at design time
Hello,
I am using SAP Crystal report with VS 2010.
I designed a report. At design time every thing appears fine. Margins are set to 0, printer is selected and page size is custom.(right click on report, design>pagesetup)
When I use <reportname>.printtoprinter(), it dramatically changes the text size and margins of the report in hard copy. I tried literally everything for this. Especially It adds nearly 2 inches extra margin at top.Also , at run time it changes the font size to 8 or 9 points if i have set it to 12 at design time.
I get the same problem if I do following:
crystalReportViewer1.ReportSource = rptRcAbh;
crystalReportViewer1.PrintReport();
HOWEVER!!
When I do this:
crystalReportViewer1.ReportSource = rptRcAbh;
AND when I manually click the print button of crystal report viewer, i get EXACTLY SAME result as design time. This is what I am expecting from printoprinter() method. But Its changing result dramatically.
Why is this happening? Am I forgetting any setting?
I must use reprot.printtoprinter() method here. Because I am printing the bill receipt. I dont want the user to go to printpreview then click print. AND I must get same result as design on printed page.
Please help me. I am in urgent need.Hi Don,
Firstly I am very very thankful to you for replying me.
I know I must have irritated you a bit cuz I was expecting everything ready which I should have :P
but I was in urgent need and there was no time for me to read everything. I must say a thing that I did not get good search results on printcontroller when I used search box of this website.
Well Thanks again for helping me in deed.
I am sure this must be the problem for many people across the globe, hence I am posting the exact code that helped me to print the document Accurately:
rptReceiptAbhishek rptRcAbh = new rptReceiptAbhishek();
// rptRcAbh.Load("rptReceiptAbhishek.rpt", OpenReportMethod.OpenReportByTempCopy); i did't need this line
//////// Directly Entering data to the fields of the report.
CrystalDecisions.CrystalReports.Engine.TextObject txtname;
CrystalDecisions.CrystalReports.Engine.TextObject txtaddress;
txtname = (CrystalDecisions.CrystalReports.Engine.TextObject)rptRcAbh.ReportDefinition.ReportObjects["txtRptName"];
txtname.Text = cboInitials.Text + " " + cboDonarName.Text;
txtaddress = (CrystalDecisions.CrystalReports.Engine.TextObject)rptRcAbh.ReportDefinition.ReportObjects["txtRptAdd"];
txtaddress.Text = txtAddess.Text;
rptRcAbh.PrintOptions.PrinterName = Properties.Settings.Default.PrinterName;
System.Drawing.Printing.PrintDocument pDoc = new System.Drawing.Printing.PrintDocument();
CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions rasPROpts = new CrystalDecisions.ReportAppServer.Controllers.PrintReportOptions();
CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions newOpts = new CrystalDecisions.ReportAppServer.ReportDefModel.PrintOptions();
pDoc.PrinterSettings.PrinterName = Properties.Settings.Default.PrinterName;
pDoc.PrinterSettings.SupportsColor.ToString();
//if (pDoc.PrinterSettings.SupportsColor)
// MessageBox.Show("Printer Supports Color", pDoc.PrinterSettings.SupportsColor.ToString());
rasPROpts.PrinterName = Properties.Settings.Default.PrinterName;
// rasPROpts.PaperSize = (CrPaperSizeEnum)pDoc.PrinterSettings.PaperSizes[cboCurrentPaperSizes.SelectedIndex].Kind;
//rasPROpts.PaperSource = (CrPaperSourceEnum) pDoc.PrinterSettings.PaperSources[cboDefaultPaperTrays.SelectedIndex].Kind;
// rptReceiptAbhishek rpt = new rptReceiptAbhishek();
var rptClientDoc = rptRcAbh.ReportClientDocument;
rptClientDoc.PrintOutputController.PrintReport(rasPROpts);
MessageBox.Show("Printing in progress. Make sure that printer is not turned off.", "RAS", MessageBoxButtons.OK, MessageBoxIcon.Information); -
Design Time for Processes and Forms
Hi experts,
When trying to open "Design Time for Processes and Forms" in order to create a process, I get a dump.
Could you let me know what could be wrong ? config? etc..
Hereunder is a sample of what I found in T.code ST22
The following checkpoint group was used: "No checkpoint group specified"
If in the ASSERT statement the addition FIELDS was used, you can find
the content of the first 8 specified fields in the following overview:
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
" (not used) "
referenced node must exist
READ TABLE object_hierarchy_nodes TRANSPORTING NO FIELDS
WITH KEY node_id = object_hierarchy_node_wa-ref_node_id
>>> ASSERT sy-subrc = 0.
ENDIF.
provider has to be specified (except in case of recursion)
IF object_hierarchy_node_wa-ref_node_id IS INITIAL.
ASSERT object_hierarchy_node_wa-provider_id IS NOT INITIAL.
ENDIF.
Thanks in advance,
Louisnote: Note 1075650
Re: Assertion_Failed dump when accessing Design Time for Processes & Forms EP3
regards,
Prakesh. -
How to load a file at design time?
I have a custom component which has a property that takes a path to an xml file.
I have a file chooser property editor associated with the property which returns a relative path. The component correctly resolves this path at runtime using the application context etc.. but I'm at loss on how to do this at design time.
The image component in JSC does this correctly as the image is loaded at design time using the url. I'm not sure how this is done but I'm looking for exactly the same functionality.
The only way I figured to correctly resolve the physical path of the file at design time was through the DesignBean.
In order to resolve the path and pass the resolved path to the component property I need to intercept property changed event and change the property value. However doing this in PropertyChanged(..) method of DesignInfo bean for my component doesn't do it as this is called 'after' the property value is set and changing the property value at this point results in a circular loop.
Is there any way to accomplish this? Any help is appreciated.
Thanks.Is this still unresolved? I'm sure you've read everything at "Building Custom Components"
http://developers.sun.com/prodtech/javatools/jscreator/reference/index.jsp#Building_Custom_Components
by now. I don't have the answer, but if it's still a problem, I'll work with you to figure it out.
Maybe you are looking for
-
How to delete the Webservice entry from Web service navigator?
Hi, My current issue is that, developers have created many webserivces and these web services are visible in web service navigator that i access by following link http://<host>:<port>/wsnavigator But now we have to remove the unwanted webservices i.e
-
HI.I have an apple TV and am able to mirror the image on my ipad onto the screen. However, it doesn't fill the full 32" screen. Is there some way to project a bigger image onto the Tv. Thanks for your help
-
It is NVIDIA 4800 for MAC Compatible with a Mid 2010 MACPRO,... 5,1
I would like to know if my MACPRO Mid 2010 (5,1) it is compatible with NVIDIA FX 4800 for mac or NVIDIA 4000 thank you
-
Iam getting an error while posting GR.the screen shows the document# but after coming out of the screen it shows Update was terminated " Express document "Update was terminated" received from author "Kiran Reddy" " System ID.... RP1 Client.......
-
WLC Prioritizing authentication messages!
Hi all, Q: in regards to a WLC - wireless clients and QoS. when using WPA2-AES encryption. Does anyone know how the authentication messages are prioritized? Are authentication messages (eg. EAPOL) between WLC and wireless client seen as Control traff