SiteStudio10gR4 issue : Error while saving RegDef File in Designer

Hi All,
I am also facing the sam error with sitestudio 10gR4 version.
whenever i am trying to save the Region Definition it is causing the error in SS designer "Unable to save invalid XML Invalid response from host 200 O"
and in UCM logs i can see following :
Unable to retrieve information for 'SITE1_REGDEF1'. Unable to find latest revision of 'SITE1_REGDEF1'. Unable to find latest revision of 'SITE1_REGDEF1'. [ Details ]
An error has occurred. The stack trace below shows more information.
!csUserEventMessage,sysadmin,!$!csUnableToGetRevInfo2,SITE1_REGDEF1!csGetFileUnableToFindRevision,csGetFileRevMethodLabel_Latest,SITE1_REGDEF1!csGetFileUnableToFindRevision,csGetFileRevMethodLabel_Latest,SITE1_REGDEF1
intradoc.common.ServiceException: !csUnableToGetRevInfo2,SITE1_REGDEF1!csGetFileUnableToFindRevision,csGetFileRevMethodLabel_Latest,SITE1_REGDEF1
     at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplementor.java:1760)
     at intradoc.server.Service.buildServiceException(Service.java:1997)
     at intradoc.server.Service.createServiceExceptionEx(Service.java:1991)
     at intradoc.server.Service.createServiceException(Service.java:1986)
     at intradoc.server.DocCommonHandler.determineID(DocCommonHandler.java:626)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at intradoc.common.IdcMethodHolder.invokeMethod(ClassHelperUtils.java:617)
     at intradoc.common.ClassHelperUtils.executeMethodReportStatus(ClassHelperUtils.java:293)
     at intradoc.server.ServiceHandler.executeAction(ServiceHandler.java:79)
     at intradoc.server.Service.doCodeEx(Service.java:490)
     at intradoc.server.Service.doCode(Service.java:472)
     at intradoc.server.ServiceRequestImplementor.doAction(ServiceRequestImplementor.java:1360)
     at intradoc.server.Service.doAction(Service.java:452)
     at intradoc.server.ServiceRequestImplementor.doActions(ServiceRequestImplementor.java:1201)
     at intradoc.server.Service.doActions(Service.java:447)
     at intradoc.server.ServiceRequestImplementor.executeActions(ServiceRequestImplementor.java:1121)
     at intradoc.server.Service.executeActions(Service.java:433)
     at intradoc.server.ServiceRequestImplementor.doRequest(ServiceRequestImplementor.java:635)
     at intradoc.server.Service.doRequest(Service.java:1707)
     at intradoc.server.ServiceManager.processCommand(ServiceManager.java:359)
     at intradoc.server.IdcServerThread.run(IdcServerThread.java:197)
Caused by: intradoc.common.ServiceException: !csGetFileUnableToFindRevision,csGetFileRevMethodLabel_Latest,SITE1_REGDEF1
     at intradoc.server.utils.FileRevisionSelectionUtils.computeDocumentRevisionInfo(FileRevisionSelectionUtils.java:303)
     at intradoc.server.DocCommonHandler.determineID(DocCommonHandler.java:621)
     ... 19 more
and in site studio logs :
1. Failed to load language specific resource library (C:\Program Files\oracle\Universal Content Management\Site Studio\Designer\10gR4\resources\en\SSLoggerEngineRes.dll)
2. Failed to load language specific resource library (C:\Program Files\oracle\Universal Content Management\Site Studio\Designer\10gR4\resources\en\BCGCBProRes.dll)
3. Failed to load language specific resource library (C:\Program Files\oracle\Universal Content Management\Site Studio\Designer\10gR4\resources\en\SSCommonMfcRes.dll)
4. Failed to load language specific resource library (C:\Program Files\oracle\Universal Content Management\Site Studio\Designer\10gR4\resources\en\SiteStudioDesignerRes.dll)
5.Failed to load language specific resource library (C:\Program Files\oracle\Universal Content Management\Site Studio\Designer\10gR4\resources\en\SSHtmlTidyRes.dll)
6.Failed to load language specific resource library (C:\Program Files\oracle\Universal Content Management\Site Studio\Designer\10gR4\resources\en\SSWebBrowserExRes.dll)
7. Failed to load language specific resource library (C:\Program Files\oracle\Universal Content Management\Site Studio\Designer\10gR4\resources\en\SSWebBrowserExRes.dll)
8. Failed to check in file "10GR3_REGDEFNEW1" from location "C:\Documents and Settings\<user>\Application Data\Stellent\Site Studio\SampleSite on <local IP>\10GR3_REGDEFNEW1.xml".
(Invalid response from host. 200 O)
9.Failed to load language specific resource library (C:\Program Files\oracle\Universal Content Management\Site Studio\Designer\10gR4\resources\en\SSWebBrowserExRes.dll)
10.Failed to load language specific resource library (C:\Program Files\oracle\Universal Content Management\Site Studio\Designer\10gR4\resources\en\SSWebBrowserExRes.dll)
11.Failed to check in file "SITE1_REGDEF1" from location "C:\Documents and Settings\<user>\Application Data\Stellent\Site Studio\Site1 on <LOCAL IP>\SITE1_REGDEF1.xml".
(Invalid response from host. 200 O)
Is there any way to get over this issue???
Thanks & Regards,
Nupur

Hi Srinath,
Thanks for quick response,
Yea, i am able to see that RD file IN UCM directory in following path :
UCM\weblaout\Groups\public\documents\adacct
it's structure is only :
<?xml version="1.0" encoding="UTF-8" ?>
<regionDefinition xmlns="http://www.oracle.com/sitestudio/Element/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://www.oracle.com/sitestudio/Element/ http://www.oracle.com/sitestudio/ss_element_definition.xsd">
</regionDefinition>
& Site Studio version is : SiteStudio 10gR4 (10.1.4.0.0)
perhaps this SS-D was working all fine , was able to save all kind of files from SS-D w/o this error.
i havn't sone any changes or customization, so version should not be the issue .
Any inputs to get over this issue will be so helpful !!
Thanks & Regards,
Nupur

Similar Messages

Error while saving PDF file..

Hi All,
While i am trying to save pdf file from MDM to my local file(on my PC) it gives me error...
<0xFFAAA002>,Version 5.5SP6(5.5.62.33)
Does anyone knows what the issue wud be ..is there any version mismatch ..
Please let me know if anyone has faced this issue..
Regards
Vikrant M Kelkar

Hi Vikrant,
I am also facing the same issue
But there are two ways through which you can save the PDF file on your disk.
1. Go to PDFs table, right click on the PDF record which you want to save and select the option Save Original to disk...Just click on save no need to select or write any extension.
2. From the Record Detail pane right click on PDF and select View PDF. Now you can save the PDF by clicking on Save option available.
Reward if useful
Regards,
Jitesh Talreja

Error while saving xml file using PDFDocument API

Hi,
I am trying to save xml file using byte array obtained from interactive form element in webdynpro java.
The file gets saved but I get fllowing error message when I open the file.
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'http://uxjciesk.wdf.sap.corp:50000/irj/go/km/doc...
The code I am trying to achieve the functionality is:
byte[] byteArray = wdContext.currentContextElement().getPdfSource();
IWDPDFDocumentHandler pdfDocumentHandler = WDPDFDocumentFactory.getDocumentHandler();
IWDPDFDocumentAccessibleContext documentAccessibleContext = pdfDocumentHandler.getDocumentAccessibleContext();
documentAccessibleContext.setPDF(byteArray);
IWDPDFDocument pdfDocument = documentAccessibleContext.execute();
ByteArrayInputStream dataInputStream = (ByteArrayInputStream) pdfDocument.getPDFAsStream();
further, the datainputstream is used to store the file. I am able to save same xdp template in pdf file format successfully, the error only occurs for xml file storage.
Please, advise.
Regards,
Urvashi

Hi Urvashi,
    Try this code
          String contentStr = getXMLData(wdContext.currentContextElement().getPdfSource().read(false));
          String data = "";
          ByteArrayOutputStream pdfSourceOutputStream = new ByteArrayOutputStream();
          try {
               InputStream pdfSourceInputStream = wdContext.currentContextElement().getData().read(false);
               BufferedInputStream bufferedInputStream = new BufferedInputStream(wdContext.currentContextElement().getData().read(false));
               int aByte;
               while ((aByte = bufferedInputStream.read()) != -1) {
                    pdfSourceOutputStream.write(aByte);
               pdfSourceOutputStream.flush();
               pdfSourceOutputStream.close();
               IWDPDFDocument pdfDocument = null;
               try {
                    // Create an instance for PDFDocumnetHandler
                    IWDPDFDocumentHandler pdfDocumentHandler = WDPDFDocumentFactory.getDocumentHandler();
                    //Create an Inatance for PDFDocumentAccessibleContext
                    IWDPDFDocumentAccessibleContext documentAccessibleContext =     pdfDocumentHandler.getDocumentAccessibleContext();
                    //set the pdf data as OutputStream to the PDFDocumentAccessibleContext instance
                    documentAccessibleContext.setPDF(pdfSourceOutputStream);
                    //call the server to get the data
                    pdfDocument = documentAccessibleContext.execute();
                    //get the xml data in a InputStream
                    ByteArrayInputStream dataInputStream = (ByteArrayInputStream) pdfDocument.getData();
               } catch (Exception e) {
                    data = "Null";
          } catch (IOException e) {
Regards,
Mathan

Error while saving the file path

I have come across a problem in LSMW.
In specify files step when I was trying to give the filename either in Presentation server or Application server and then save ,I am getting an error called 'No Logical Path has been specified'. In debugging I can see p_log_path and p_log_file are initial where as p_phys_file_compl has the file which is created automatically with standard naming convention. These 3 fields represents Converted Data files. I think the problem is with settings since the error is not happening to other users. If we double click 'Converted Data' I can see Logical Path and Logical File fields. If I give the same file that is used for converted data it is asking me to create and if we agree then it creates and then we are able to save. So I think there is some setting changes or some other thing happened which at this stage I couldn't find out because I have not changed any settings. So can you please let me know if u have come across the same problem or if u know the solution.

In the <b>specify files path</b> have u specified the paths correctly.
5 Legacy data          On the PC (frontend)
VASG3 INPUT FILE               Y:VHDEV TEST FILE unlinked genl1.txt
                                        Data for one source structure (table)
                                        Delimiter tabulator
Order of fields as in source structure definition
                                        With end of record sequence (text file)
                                        Codepage ASCII
Legacy data          On the R/3 server (application server)
5 Read Data            File for read data (application server)
5 Read Data                      /int/T82/conv/VNH_ASGN3.lsmw.read
A82      /int/A82/conv/VNH_ASGN3.lsmw.read
             P82      /int/P82/conv/VNH_ASGN3.lsmw.read
             T82      /int/T82/conv/VNH_ASGN3.lsmw.read
5 Converted Data       File for converted data (application server)
5 ConvertedData                 /int/T82/conv/VNH_ASGN3.lsmw.conv
A82      /int/A82/conv/VNH_ASGN3.lsmw.conv
             P82      /int/P82/conv/VNH_ASGN3.lsmw.conv
             T82      /int/T82/conv/VNH_ASGN3.lsmw.conv
Values for wildcard Values for wildcard '*' in file names
Refer teh above u ahve to specifythe path till PROD system.
I too faced the saem problem.

Error while saving Excel File

I have installed Microsoft Home & Business 2013, when i tried to save the excel file i am getting a message If you want to save documents with this file type, disable the registry policy setting from these path File---> Options--->Trust Center
and then click Trust Center Settings----->File block settings. But in Truest center settings their is no FILE BLOCK SETTINGS.
I donot have MSDN ID Or 7 digit partner ID.
so Pls guide me...
Megha

Hello,
The Forums Issues (not product support) forum is to report issues with the online forums application. This is not a support forum.
You should ask in the Microsoft Office Community Forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Error while Saving the report

Hi,
i have created some reports which are working fine,
but now i am facing some errors while saving the files.
Also the reports does show only one record while there are many records in the database.
The error messages are as follows:
REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
REP-1070: Error while opening or saving a document.
Please help me to find out the exact problem.
Also tell me how can i show all the pages of Database records in a report( while one record on each page)

As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
As you'll discover, Reports is not the most robust application ever written.

Firefox crashes whenever i want to install any addon or download any file. Some times i am receiving error while downloading any file like "could not be saved, because you cannot change the contents of that folder"

I am the user of latest firefox 3.6.6 browser. I am getting problems of frequent crashes whenever i tries to install any addon. The crashes also occures whenever i want to download any file.
I am also receiving errors while downloading any file like:
"C:\Users\****\AppData\Local\Temp\******.001.part could not be saved, because you cannot change the contents of that folder.
Change the folder properties and try again, or try saving in a different location. I already changed it many many times but still the same problem."
Adobe flash palyer is also giving problems of not responding. I am using updated version of it already. Java is also updated.
I already uninstalled firefox compeletly and re installed it many many times but still the same problem. I also scanned my computer with avira and malware bytes' Anti malware and got no dection. Please ractify this problem ASAP lest my profession will suffer.
== Crash ID(s) ==
b7f518f2-8d86-41ca-8bab-aee632100709; 1d790e10-d8eb-4904-98c9-94bc62100708; f042d319-b9f8-42ed-a8cb-57c7d2100708

Please help.
It is getting worse
Adobe flash player is crashing. I already uninstalled and re installed the latest ver. Also it is hanging randomly.
Please help.

CAD Integration - Error While Saving file

Hi,
Im having One Document type "DRW" which was working fine with all the functionalities.
After that i created another document type "PDW". Now all the functionalities are working fine for this Document type and not for "DRW".
Im getting an error while saving the drawing file in AutoCAD.
For DRW Type, I can able to create a DIR. After creating DIR if i click save button im getting this error.
RFC_SYS_EXCEPTION
SAP RFC error
Operation: BAPI_DOCUMENT_CHANGE2
Group    : 104
Key      : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group    : 104
Key      : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group    : 104
Key      : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group    : 104
Key      : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Reading titleblock data for 0000000000000010000000458/DRW/000/00...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: CAD_GET_TITLE_BLOCK_DATA
Group    : 104
Key      : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Updating document info record 0000000000000010000000458/DRW/000/00 ...
RFC_SYS_EXCEPTION
SAP RFC error
Operation: BAPI_DOCUMENT_CHANGE2
Group    : 104
Key      : RFC_ERROR_SYSTEM_FAILURE
Message : Wrong status
Command:
Command: Conversion to JPG done.
Checkin file into the existing storage category ZMRK ...
E26 253 Error while checking in and storing:
C:\SapWorkDir\AcadM\ConvertTempPath\10000000458_DR
But there is no error in "PDW" document type.
Anybody have any idea on this?
Regards,
MRK.

Hi MRK,
Check the Status in DC10.
Also make sure you have configured in dc30
If possible send me the config file (.cfg)* to [email protected]
I ll check n revert back...
Have you done any settings based on document type in CFG file?
Niranjan
Award points if useful...
Edited by: Niranjan Dandekar on Mar 7, 2008 1:42 PM

While specifying file in LSMW it is giving an error while saving 'No logica

while specifying file in LSMW it is giving an error while saving 'No logical path has been specified'.why it is coming like that?

Hi Shree,
This error looks like that you have attached the activity to the work center and there is no rate has been maintained in KP26. Please maintain the activity ...for1000/300008/LABORP
for the period and try to repeat the costing run.
I hope this clarifies...
Regards
Rajesh A

Getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1. It is creating issue to convert PDF into TIFF. Please provide the solution ASAP

Hello All,
I am getting 'Out of memory' error while opening the file. I have tried several versions of Adobe 7.0,9.0,X1.
Also, it is creating issue to convert PDF into TIFF. Please provide the solution ASAP.

I am using Adobe reader XI. When i open PDF it gives "OUT of memory" error after scrolling PDF gives another alert "Insufficient data for an image". after clicking both alerts it loads full data of PDF. It is not happening with all PDFs. couple of PDFs are facing this issue. Because of this error my software is not able to print these PDFS into TIFF. My OS in window7*64. I tried it on win2012R2 and XP. Same issue is generating there.
It has become critical issue for my production.

Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed

Dear All,
I am working on BPM 11g.
I installed the following products for BPM 11g
OS: Windows 7 SP1 Professional Edition all with 32 bit
Installed s/w:
    JDeveloper 11.1.1.6.0 Generic Version
    OracleXE 11.2 Win32
    ofm soa generic 11.1.1.6.0
    wls 10.3.5
    RCU 11.1.1.6 for schemas dev_soainfra, dev_sdpm and dev_mds - Utility run successfully.
Overall Installation is successful wth no issues.
Configuration of Weblogic server for domain is ok with admin server, soa_server1 and bam_server1 with test connections is ok.
I am using browser as Internet Explorer 9
In Jdeveloper 11.1.1.6.0 after creating application, project and process
From BPM MDS Navigator I configured the connection for Database 11g XE as well using
Override Application Server user/password
For SOA MDS I included the dev_mds user with MDS partition as obpm
tested connections all ok (weblogic and soa_server1 up and running)
In Jdeveloper I am able to export the BPM successfully.
In the BPM Project Navigator when I use the Project --> SalesQuote.jpr --> right clicking with
option as Save to BPM MDS the following error is occured as
"Error while saving BPM Project to MDS: BPM-70801 : Metadata operation failed".
If the error is resolved than I can see the project in BPM composer.
My queries on this error are
1) Has soa_server anything to do with this error
2) Is dev_mds schema to be reviewed
what can be the possibility to resolve the BPM-70801 error.
Please provide the solution ASAP or send me the reply to my [email protected]
Regards
Ajaz Ahmed

Hello Ajaz,
BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
Regards
km

Error while saving Long Texts

Hello
We are using SRM7 Extended classic scenario.
We don't use shopping carts, rather create POs directly in SRM which will be transferred to ECC as per the standard.
Error:
I am getting an error "Error while saving Long Texts" during my PO creation. I get this message in a small pop-up screen. As soon as i click ok or close the pop up screen it kicks me out of the PO creation screen back into the main SRM screen.
When:
During the PO Creation
Any specific situation:
Yes, only for Material POs
This is happening when I am creating the PO with a Material code. I can create free text PO without any issues.
This is a standard message and the message number is 022.
Thaks for the help guys.

Hi,
To confirm can you check commeting "getOADBTransaction().commit();" gives any error message?
If yes then you can try the following option:
Have you checked whether the "/" is changed to "\" in the dbc file?
In the following two entries the slash has to be made as shown below:
APPS_JDBC_URL=jdbc\:oracle\:thin\:@(DESCRIPTION\=(ADDRESS_LIST\=(LOAD_BALANCE\=YES)(FAILOVER\=YES)(ADDRESS\=(PROTOCOL\=tcp)(HOST\=10.100.503.6)(PORT\=1521)))(CONNECT_DATA\=(SERVICE_NAME\=VIS)))
JDBC\:processEscapes=true
Thanks and Regards,
Lacman

Form Builder crashes while saving .fmb file when connected to db

Hi,
I am getting error The instruction at "0x679c352c" referenced memory at "0x0000001c". The memory could not be "read".
Forms version is 6.0.8.11.3 and database version is 10.2.0.3.0
I am doing the following steps:
1) Open .fmb file in forms builder
2) Connecting to database
3) Making some changes in form
4) Compiling (Ctrl+Shift+K) and generating form (Ctrl+t)
5) Saving form <--- Here I am getting the error and form crashes
If I do not connect to database then builder is allowing me to save the file
1) Open .fmb file in forms builder
2) Making some changes in form
3) Saving form (Successful)
I did some exercise just as a guess that may some part of the form is causing this error. I full expanded all components of the form i.e. blocks, canvases, triggers etc.
This exercise produced that 3 program units were giving same error while full expending those. I deleted those 3 program units and re-created them. Now it is not showing me this memory error while full expanding all program units. I can now fully expand my full form.
But I am still getting this error while saving the changes when I am connected to database.
Please help.
Regards,
Edited by: rawat75 on Sep 2, 2011 7:13 PM

Hi Experts,
We are getting the same issue. Our form builder crashes once we open our custom form
in form builder.
Server shows:-
Forms 6.0 (Forms Runtime) Version 6.0.8.28.0 (Production)
Form Builder shows:-
Forms [32 Bit] Version 6.0.8.11.3 (Production)
How to upgrade the form builder version?

I keep getting "Unknown Error while saving"

I keep getting "Unknown Error while saving"
Using APE-11 on Windows 7- This error is a first for me, after many years of using Premiere. The product is a mix of photos (jpg and png), video clips (mpg-2 and mp4), and audio clips (all mp3). When I try to publish as Standard DVD- MPEG-2. I get the error. Error repeats saving as MP4. Error gives no location on the timeline where it is running into an obstacle to saving, so I do not know where to begin looking to remove repair or replace the item causing the 'unknown error'. The prel runs fine, start to finish, giving no indication that the save may run into a problem on final rendering.
I have tried many different options like rendering the entire timeline prior to saving, converting the clips to all be the same format, with no resolution to the problem.
I have worked many long hours for many weeks on this project, and I am not going to give it up, especially when the majority of the clips were created on APE in the first place, and the images are all Photoshop edited images
HELP PLEASE!!
DougN

Screenshot of error message for above issue
Also: Since first report, I have attempted render with all sound clips removed (easiest to to with hundreds of clips/photos), with no help. Same error appears.
I will continue removing aspects of the project until I get a completed save, or until I get an answer here!
After removing the sound and video clips, video saved ok, with blank spots where the missing video clips were. So I reopened the original prel file, and began checking them individually.
When I checked the clip properties, it correctly identified the path to the source video, but when I asked it to 'reveal in project', I got this error
So I assume this is where the SAVE error is happening, but as I am not an Adobe coder, I have no idea what it is telling me.
I did check to insure that the source video from which this clip originates, is in the project assets. I checked all the other clips as well, and any clip from this source video, generates the same error.
The source video runs fine on its own and is an mpeg-2 file.
Properties of the source video are:

Error While saving a iBot

Hi All ,
I am getting the below error while saving a iBot.
Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
Can i not use XLS as a datasource for iBot?
If i can use , what is the solution of this problem.
Thanks in advance.
-- Ashish

Hi Vivek,
Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
<user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
<user profile>\appdata\local\microsoft\websitecache\<sitename>
http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
Thanks
We are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SiteStudio10gR4 issue : Error while saving RegDef File in Designer

Similar Messages

Maybe you are looking for