Sitraka JProbe Profiler with weblogic 5.1

Has anyone used Sitraka's JProbe Profiler 2.8.1 with weblogic 5.1 server, service
pack 8 and JDK1.2.2 (reference implementation) succesfully? I keep getting security
exceptions and can't get past them. Things worked fine with JDK1.1.8. Any setup pointers
will be appreciated. Please send replies to [email protected] Thanks.

The key to running WL successfully over JProbe is to use the EXACT same commandline to run
jplauncher as you would java...
So, if your startWeblogic line looks like this:
java weblogic.Server blablabla
Then your startJProbe line should look like this:
jplauncher -jp_input=jprobe_properties.jpl blablabla
Just make sure the blablabla is the same!
Gene
"Furrokh Irani" <[email protected]> wrote in message news:3a8a8bae$[email protected]..
>
Has anyone used Sitraka's JProbe Profiler 2.8.1 with weblogic 5.1 server, service
pack 8 and JDK1.2.2 (reference implementation) succesfully? I keep getting security
exceptions and can't get past them. Things worked fine with JDK1.1.8. Any setup pointers
will be appreciated. Please send replies to [email protected] Thanks.

Similar Messages

Problem integrating JProbe 4.0 with Weblogic 4.5.1

I'm trying to integrate JProbe 4.0 with Weblogic 4.5.1. JProbe
doesn't provide an integration for this version of Weblogic so I have
to do the set up by hand. We are running Weblogic with a 1.3 JVM on
Solaris.
First problem is that the JVM we were using wasn't supported by
JProbe. So I swapped to a different version. The application,
consisting of about 150 EJBs plus JSPs and Servlets works fine with
this JVM. When I run with JProbe, JProbe waits for the console
connection then Weblogic starts. About half way through deploying all
the EJBs the application stops. I've done a thread dump and it
doesn't seem to be a deadlock. Looking at the JProbe console I can
see that objects are getting allocated and GC'd in the typical saw
tooth fashion indicating that things are still running. I've waited
15 minutes but the application does not progress beyond this point.
Any got any ideas about this or tips as to how I can debug things
further?
tia
David

Hi David,
You could try to turn off memory debugging along with
putting the debug environment into a big fat box. With
memory debugging on JProbe is slooooow...
Regards,
Slava Imeshev
"David Off" <[email protected]> wrote in message
news:[email protected]..
I'm trying to integrate JProbe 4.0 with Weblogic 4.5.1. JProbe
doesn't provide an integration for this version of Weblogic so I have
to do the set up by hand. We are running Weblogic with a 1.3 JVM on
Solaris.
First problem is that the JVM we were using wasn't supported by
JProbe. So I swapped to a different version. The application,
consisting of about 150 EJBs plus JSPs and Servlets works fine with
this JVM. When I run with JProbe, JProbe waits for the console
connection then Weblogic starts. About half way through deploying all
the EJBs the application stops. I've done a thread dump and it
doesn't seem to be a deadlock. Looking at the JProbe console I can
see that objects are getting allocated and GC'd in the typical saw
tooth fashion indicating that things are still running. I've waited
15 minutes but the application does not progress beyond this point.
Any got any ideas about this or tips as to how I can debug things
further?
tia
David

Help: which LDAP server should I use with weblogic 5.1

Hi:
I try to use LDAP for user profile management. I am free to use any LDAP
server as long as it is easy to work with weblogic 5.1 or 6.0.
Any suggestions?
Thank you.
li

This is what I did for my DS settings
1. select Oracle JDBC Driver
2. set Classes12.jar in Websphre classpath - (Oracle thin driver)
3. create DS with option User defined JDBC provider
means I have added Thin driver provided by Oracle , instead of deprecated Thin driver from IBM.

Deploy web application in jbuilder 9 with weblogic 7 problem

when i create a web application and a servlet, and deploy it in jbuilder 9 with weblogic 7.0 ,jbuilder 9 showed me the error,please tell me why, when i choose "redeploy" ,it can be normally work..
E:\bea\jdk131_02\bin\javaw -classpath E:\bea\weblogic700\server\lib\weblogic.jar;E:\bea\weblogic700\server\lib\webservices.jar;E:\bea\weblogic700\server\lib\weblogic_sp.jar; weblogic.Deployer -user system -adminurl http://localhost:7001 -password 12345678 -deploy -name firstWebApp -upload -source E:/J2EE/servlet/firstWebApp.war -targets myserver
WebLogic Application Deployment Utility
Usage: java weblogic.Deployer [options] [-activate|-deactivate|-remove|-unprepare|-cancel|-list] [files]
where options include:
-help Print this help message.
-version Print version information.
-adminurl <https://<server>:<port>> The URL of the administration server: default
http://localhost:7001
-user <user> A user other than the default of
"installadministrator"
-password <password> Specifies the password on the command line.
If this option is absent the user is
prompted.
-verbose Displays additional status during the
deployment process, including notifications
when the application is prepared and
activated on each target.
-debug Displays debug level messages to the standard
output.
-examples Display example usage of this tool.
-upload Causes the specified source file(s) to be
transferred to the adminstration server. This
is used when the Deployer tools is not being
used on the same machine as the adminstration
server and the user does not otherwise have
access to place the targeted files on the
adminstration server.
-delete_files Causes the server to remove the files that
are specified in the file list and leave the
application activated. This option is valid
only for unarchived web applications.
-remote Signals that the tools is not runnning on the
same machine as the adminstration server and
that the source path should be made passed
through unchanged as it represents the path
on the remote server.
-nostage Sets the stagingMethod attribute on the
application mbean when it is created so that
the application will not be staged and the
original source is be used.
-external_stage Sets the stagingMethod attribute on the
application mbean when it is created so that
the application will not be staged but the
value of the staging path will be used when
preparing the application.
-stage Sets the stagingMethod staging attribute on
the application when it is created so that
the application will always be staged. This
value will override the stagingMethod
attribute on any targeted servers.
-nowait Once the action is initiated the tool will
print the task id and exit. This is used to
initiate multiple tasks and then monitor them
later using the -list action.
-timeout <seconds> The maximum time in seconds to wait for the
completion of the deployment task. When the
time expires the current status is printed
and the program exits.
-source <archive file or directory> Location of the file or directory that
represents the enterprise component or
application tha is being (re)activated. If
the source file is relative it is relative to
the current directory, unless the -remote
option is used. To specify individual files
within an application for reployment or
addition list them at the end of the command
line.
-name <application name> The name of the application being deployed.
-targets <<server 1>,...<component>@<server N>> A comma separated list of the server and/or
cluster names. Each target may be qualified
with a J2EE component name. This enables
different components of the archive to
deployed on different servers.
-id <task identifier> Optional client supplied unique identifier
for the deployment task. The id is first
specified to -activate, -deactivate,
-unprepare or -remove. It is then used later
as an argument to -cancel or -list.
-activate (Re)activates the <source> application on the
<targets> with the <name>.
-deactivate Deactivates the application <name> on the
<targets> leaving an staged application files
in a state where the may be quickly
reactivated.
-unprepare Deactivates and unloads classes for the
application <name> on the <targets> leaving
an staged application files in a state where
the may be quickly reloaded.
-remove Deactivates the application <name> on the
<target> and removes any files that were
staged for this application. If there are no
longer any targets for the application, the
associated configuration is completely
removed.
-cancel Atempts to cancel the task <id> if it is has
not yet completed.
-list Lists the target status of each task <id>
-deploy a convenient alias for activate.
-undeploy a convenient alias for unprepare.
Optionally a list of the specific files in the archive that are to be
redeployed may be specified. If a directory is specified the entire subtree is
redeployed.
Full documentation on this tool is available at:
http://edocs.beasys.com/wls/docs70/adminguide/utils.html#1138475
No actions was specified. Please specify one and only one of:
-activate, -deactivate, -cancel, -remove, -unprepare, or -list.
Type java weblogic.Deployer -examples for example usage.

you use "deploy" under DOS-Mode to deploy your web application?
i found some differences between "deploy" and "redeploy" function in jbuilder 9.
when i choose "deploy" ,jbuilder shows me the commond below:
E:\bea\jdk131_02\bin\javaw -classpath E:\bea\weblogic700\server\lib\weblogic.jar;E:\bea\weblogic700\server\lib\webservices.jar;E:\bea\weblogic700\server\lib\weblogic_sp.jar; weblogic.Deployer -user system -adminurl http://localhost:7001 -password 12345678 -deploy -name firstWebApp -upload -source E:/J2EE/servlet/firstWebApp.war -targets myserver
WebLogic Application Deployment Utility
when i choose redeploy,it shows me: (the -deploy parameter has changed to -activate) ,maybe it's a bug.
E:\bea\jdk131_02\bin\javaw -classpath E:\bea\weblogic700\server\lib\weblogic.jar;E:\bea\weblogic700\server\lib\webservices.jar;E:\bea\weblogic700\server\lib\weblogic_sp.jar; weblogic.Deployer -user system -adminurl http://localhost:7001 -password 12345678 -activate -name firstWebApp -upload -source E:/J2EE/servlet/firstWebApp.war -targets myserver
WebLogic Application Deployment Utility

Velocity profiling with SoftMotion Module

Hi Folk,
I need to move a stepper motor following a velocity profile, i.e. I need to change continuously the velocity while motion is in progress.
I intend to perform the move with a cRIO platform equipped with a NI 9512 module.
By using the property & invoke nodes, introduced first in NI SoftMotion Module 2009 SP1, I have created a small test routine to perform my task.
I have used the property & invoke nodes, instead of the function blocks, because I want to update the velocity profile as fast as possible.
For the test routine I have used a simulated axis (a servo motor) and the routine is developed by using the scan interface.
In the main loop, a sinusoidal wave (point by point) generates a sample velocity profile, the velocity is passed to the "velocity" Straigth-Line Move property node and it is applied to the axis by the "Start" Straigth-Line Move invoke node.
The test routine runs circa correctly until the velocity profile cross the zero, at that time the routine stops with the following Error -77070.
I have added an offset to the generated sinusoidal profile. The test routine runs correctly if the offset sets the sinusoidal profile all positive or all negative, i.e. the offset is greater than sinusoidal amplitude.
Question (1)
I beleave that this behavior is due to a bug in the Straigth-Line Move node. I am right?
Question (2)
I have written that the routine runs "circa" correctly because furthermore the previous bug there is a timing issue.
I have set the Scan Period = 5 ms as it is requested for 951x modules.
If the timed loop (Synchronize to Scan Engine) is set to 5 scans or more the timing of the timed loop seems to be correct (the sinusoidal wave shows the period that has been configured).
If the timed loop is set to 4 scans or less the timing of the timed loop becomes longer (the sinusoidal wave shows a longer period as that has been configured).
Any idea about this timing issue?
Question (3)
Any suggestion how to write a faster velocity profiling with the SoftMotion Module?
Thanks for your help,
Asper
P.S.
Error -77070 occurred at Invoke Node in Axis_Velocity_profiling.vi
Possible reason(s):
NI SoftMotion: A Start operation is pending. Please add a delay between consecutive preemptive Start Motion calls.
Attachments:
velocity_profile_exemple.zip ‏77 KB

Hi Reid,
I am developing a system for low-force tests of very thin tissues in tension and fatigue.
The force is measured with a load cell and is applied by pulling the sample with a linear translation stage and the elongation is measured with a linear encoder.
The linear stage is motorized with a 2-phase-stepper motor, and with two limit switches. The stepper is designed for applications with very limited space conditions and the motor is hollow.
The linear encoder has a 20 nm resolution and a 1 um accuracy, and includes an electronic for signal conditioning that is compliant with the encoder input of the NI 9512 module.
The load cell is a full bridge with an accuracy better than 0.01 %. For acquiring and conditioning the full bridge, the system uses a NI 9237.
The system will provide tests that are controlled both in force and in elongation.
For the tests controlled in force, the loop is closed with the signal measured by the load cell and the translation stage is driven in velocity.
For the tests controlled in elongation, the loop is closed with the encoder signal and the translation stage is driven in position.
For both type of tests, the user can select different test profiles, for example: a linear increasing, a sinusoidal profile for fatigue test, etc.
The user can pause the test at any time, and the system must take the condition, until the next proceed command.
My previous post: question (1)
Your reply:
I ran the code Axis Override Test 1 on my machine on a simulated Axis and this was the performance I observed:
Our versions maybe differing did you see the same behavior on a simulated axis?
Concerning the velocity that is read from the Read (Data) function block, I observe the following:
With a simulated axis (both in My computer and in cRIO-9073) the values are positive for forward move and they are negative for backward move (as you also have observed).
With the real axis (NI 9512) the values are positive both for forward move and backward move.
Please see the next images.
With simulated axis
With real axis (NI 9512)
My system is as follows:
   LabVIEW: 9.0f3
   SoftMotion: 9.0.1
   NI-Motion: 8.1.0.3037
   NI-RIO: 3.3.1
   NI-RT: 9.0.0
I want to point out that the simulated-axis is a servo drive while the real axis is a stepper drive (NI 9512).
With my software release, I believe that this behavior is due to a bug, probably in the stepper drive interface. I am right?
I suggest that you try on a real stepper axis (NI 9512).
My previous post: question (2)
Your reply:
These two questions I feel share the same root cause. It takes a little bit longer to calculate the a preemptive move in the opposite direction.
Considering the observation on the Read (Data) function block issue, now I note that my second question arises from the sum of two different behaviors. In case the Read (Data) function block issue is solved, as for simulated axis, the sentence can be rewritten as:
The velocity plot shows some computation troubles as the velocity is approaching the zero, with the derivative both positive and negative.
Furthermore I have discovered that this computation troubles gives a blocking error if the velocity is approaching the zero with a zero derivative.
Once the velocity reaches the zero with a zero derivative, the "Velocity Override" Write is no any more able to change the velocity!
No errors or warnings comes out in this situation!
This behavior is true with an axis both real and simulated, and is still true both with an all function blocks code and a mixed function blocks/invoke nodes code.
From this point of view, the velocity troubles with the approaching to zero are very very bad!
Please consider that in the previous posted example you can find an all function blocks code, Axis Velocity Override_test_0.vi, and a mixed function blocks/invoke nodes code, Axis Velocity Override_test_1.vi.
You can easily test the velocity blocking error by putting the parameter offset = amplitude in the previous posted example.
My previous post: question (3)
Your reply:
I am curious if you are observing that around zero % the override function performs poorly, was this present on the function block example? I think the problem here is the preemptive move being called from the straightline move function. Basically, the trajectory generator is still calculating points when send the command to it. Since we are updating the velocity at a very fast interval we notice some of this breakup due to the longer latancy times. Even with this
Error -70216 occurred at an unidentified location
Possible reason(s):
Motion: A required resource is busy and unable to accept further commands at this time.
To get around this error you will need to call into the trajectory generator at a slower period of time to allow it to finish the operation in progress. Keep in mind the control loop we are calling into in RT is the command loop to the trajectory generator and the position control loop is performed on the FPGA of the module itself.
I want to underline that the computation troubles as the velocity is approaching the zero has not apparent connection with the Error -70216.
I have tested the posted routines with Scan Period = 5 ms and the Number of Scans = 5 or more (25 ms for cycle or more) and the computation trouble is still there every time that the velocity is approaching the zero.
The Error -70216 come out randomly and increases as the cycle time decreases.
I did not observe any decay in the time to perform the Velocity Override around zero %, but you have to consider that I did not make any test to investigate this issue.
I agree with you, the Error -70216 can arise from some commands that try to access the same resource a the same time.
In my opinion the Velocity Override has to be predominant, i.e. no matter what the routine is actually doing, the routine should start immediately to correct the actual velocity to reach the new value.
Suggestion: for the future release of the Velocity Override, please consider to leave the opportunity to select from percentage velocity (as it is now) an absolute velocity.
Regards,
Asper

Crystal Report 9 connectivity with WebLogic 10.3.5

Hello,
Is the Crystal Report 9 certified with WebLogic 10.x? Currently WebLogic 8.x is in use. Trying to upgrade the WebLogic.
Thanks

What does this have to do with Database Connectivity?
An I doubt it, CR 9 is about 8 or 9 years old well before 10.3 was released. Check the Platforms PDF's for more info.
Don

App-v 5.0 sp3 Publish application icons/ shourtcut missed on 2nd time logon on terminal server 2012 r2 with roaming profile with folder redirection

1. I updated app-v 5.0 sp3 environment on 2012 R2. Roaming profile users with folder redirection logon fine at first time applications icons available but at 2nd logon applicaitons icons are missed while packages are available. we are using existing
roaming profiles with folder redirection which are running in current environment through APP-V 4.6 2008 R2. Please suggest work around to resolve this issue.
2. TS Nodes of 2008 R2 with App-v 4.6 running fine on Microsoft 2012 private cloud but we are facing performance issue (stuck, slow logon, slow performance etc) when we are moving in new 2012 R2 private cloud. SAP, SCSM and other sevices are running
fine, please provide solution.
Thanks

1.) What are you doing with the App-V Icon path? e.g. %LOCALAPPDATA%\Microsoft\AppV\Client\Integration\<GUID>\Root\AppVClientUX.exe.0.ico ?
I guess you could workaround it with deploying the icons to a central location and then pointing to the icon out on a central share. Or put the icons in a machine location...I haven't had this issue but that's just off the top of my head.
2.) I have not used App-V 4.6 in an environment like yours BUT would pre-caching the applications be possible? Any chance you'll be moving those apps into App-V 5.0 soon?
PLEASE MARK ANY ANSWERS TO HELP OTHERS Blog:
rorymon.com Twitter: @Rorymon

Has anyone used JAAS with WebLogic?

Has anyone used JAAS with Weblogic? I was looking at their example, and I have a bunch of questions about it. Here goes:
Basically the problem is this: the plug-in LoginModule model of JAAS used in WebLogic (with EJB Servers) seems to allow clients to falsely authenticate.
Let me give you a little background on what brought me to this. You can find the WebLogic JAAS example (to which I refer below) in the pdf: http://e-docs.bea.com/wls/docs61/pdf/security.pdf . (I believe you want pages 64-74) WebLogic, I believe goes about this all wrong. They allow the client to use their own LoginModules, as well as CallBackHandlers. This is dangerous, as it allows them to get a reference (in the module) to the LoginContext's Subject and authenticate themselves (i.e. associate a Principal with the subject). As we know from JAAS, the way AccessController checks permissions is by looking at the Principal in the Subject and seeing if that Principal is granted the permission in the "policy" file (or by checking with the Policy class). What it does NOT do, is see if that Subject
has the right to hold that Principal. Rather, it assumes the Subject is authenticated.
So a user who is allowed to use their own Module (as WebLogic's example shows) could do something like:
//THEIR LOGIN MODULE (SOME CODE CUT-OUT FOR BREVITY)
public class BasicModule implements LoginModule
private NameCallback strName;
private PasswordCallback strPass;
private CallbackHandler myCB;
private Subject subj;
         //INITIALIZE THIS MODULE
           public void initialize(Subject subject, CallbackHandler callbackHandler, Map sharedState, Map options)
                  try
                       //SET SUBJECT
                         subj = subject; //NOTE: THIS GIVES YOU REFERENCE
TO LOGIN CONTEXT'S SUBJECT
                                                 // AND ALLOWS YOU TO PASS
IT BACK TO THE LOGIN CONTEXT
                       //SET CALLBACKHANDLERS
                         strName = new NameCallback("Your Name: ");
                         strPass = new PasswordCallback("Password:", false);
                         Callback[] cb = { strName, strPass };
                       //HANDLE THE CALLBACKS
                         callbackHandler.handle(cb);
                  } catch (Exception e) { System.out.println(e); }
     //LOG THE USER IN
       public boolean login() throws LoginException
          //TEST TO SEE IF SUBJECT HOLDS ANYTHING YET
          System.out.println( "PRIOR TO AUTHENTICATION, SUBJECT HOLDS: " +
subj.getPrincipals().size() + " Principals");
          //SUBJECT AUTHENTICATED - BECAUSE SUBJECT NOW HOLDS THE PRINCIPAL
           MyPrincipal m = new MyPrincipal("Admin");
           subj.getPrincipals().add(m);
           return true;
         public boolean commit() throws LoginException
               return true;
    }(Sorry for all that code)
I tested the above code, and it fully associates the Subject (and its principal) with the LoginContext. So my question is, where in the process (and code) can we put the LoginContext and Modules so that a client cannot
do this? With the above example, there is no Security. (a call to: myLoginContext.getSubject().doAs(...) will work)
I think the key here is to understand JAAS's plug-in security model to mean:
(Below are my words)
The point of JAAS is to allow an application to use different ways of authenticating without changing the application's code, but NOT to allow the user to authenticate however they want.
In WebLogic's example, they unfortunately seem to have used the latter understanding, i.e. "allow the user to authenticate however they want."
That, as I think I've shown, is not security. So how do we solve this? We need to put JAAS on the server side (with no direct JAAS client-side), and that includes the LoginModules as well as LoginContext. So for an EJB Server this means that the same internal permission
checking code can be used regardless of whether a client connects through
RMI/RMI-IIOP/JEREMIE (etc). It does NOT mean that the client gets to choose
how they authenticate (except by choosing YOUR set ways).
Before we even deal with a serialized subject, we need to see how JAAS can
even be used on the back-end of an RMI (RMI-IIOP/JEREMIE) application.
I think what needs to be done, is the client needs to have the stubs for our
LoginModule, LoginContext, CallBackHandler, CallBacks. Then they can put
their info into those, and everything is handled server-side. So they may
not even need to send a Subject across anyways (but they may want to as
well).
Please let me know if anyone sees this problem too, or if I am just completely
off track with this one. I think figuring out how to do JAAS as though
everything were local, and then putting RMI (or whatever) on top is the
first thing to tackle.

Send this to:
newsgroups.bea.com / security-group.

LoadUserProfile() creates a profile with Chinese characters on a remote system

Hi,
I'm working on an application where LoadUserProfile() is being used to remotely load a user profile on a machine. The token being passed to LoadUserProfile() is obtained from LogonUser().
When doing this only with a Domain Admin user which is added in Active Directory, it creates a profile with Chinese characters in the C:\Users\ folder of the remote machine. Note that this happens only when logging in for the first time with
this Domain Admin account remotely on that machine.
// code:
PROFILEINFO pi;
memset((void *) &pi, 0, sizeof(PROFILEINFO));
pi.dwSize = sizeof(PROFILEINFO);
pi.dwFlags = PI_NOUI;
pi.lpUserName = (TCHAR *)strUser; //strUser is the User name, and it shows correctly here when debugging
if (LoadUserProfile(hToken, &pi))
//It is actually successful, and comes here when debugging.
Although the name shows up correctly when debugging (remotely), why is it creating a profile with Chinese characters on the remote machine?
TIA,
Jy

CreateProfile won't load the profile. You need to use LoadUserProfile to load the profile, and you need to query for a roaming profile path to put in the lpProfileInfo parameter if you want to include that as well. You need a token for a
user to call LoadUserProfile, but not a profile handle. LoadUserProfile will populate that for you before it returns if it was successful. See this excerpt from
https://msdn.microsoft.com/en-us/library/windows/desktop/bb762281%28v=vs.85%29.aspx:
Upon successful return, the hProfile member
of PROFILEINFO is
a registry key handle opened to the root of the user's hive. It has been opened with full access (KEY_ALL_ACCESS). If a service that is impersonating a user needs to read or write to the user's registry file, use this handle instead of HKEY_CURRENT_USER.
Do not close thehProfile handle.
Instead, pass it to the UnloadUserProfile function.
This function closes the handle. You should ensure that all handles to keys in the user's registry hive are closed. If you do not close all open registry handles, the user's profile fails to unload. For more information, see Registry
Key Security and Access Rights and Registry
Hives.
WinSDK Support Team Blog: http://blogs.msdn.com/b/winsdk/

EJB 3.0 MDB deployment issue with weblogic 10.0

Hi there,
I am new to MDB EJB and right now I am using the EJB 3.0 with weblogic server 10.0. I am using Eclipse 3.4 for development.
After developing the MDB from eclipse I export the EAR from eclipse and deploy it in weblogic. When I try to start the deployed EAR it gives me following error.
weblogic.application.ModuleException: Exception preparing module: EJBModule(Message.jar)
Unable to deploy EJB: MessageBean from Message.jar:
[EJB:011113]Error: The Message Driven Bean 'MessageBean(Application: MessageEAR, EJBComponent: Message.jar)', does not have a message destination configured. The message destination must be set using a message-destination-link, destination-resource-link, destination-jndi-name or a resource-adapter-jndi-name.
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:399)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
     Truncated. see log file for complete stacktrace
[EJB:011113]Error: The Message Driven Bean 'MessageBean(Application: MessageEAR, EJBComponent: Message.jar)', does not have a message destination configured. The message destination must be set using a message-destination-link, destination-resource-link, destination-jndi-name or a resource-adapter-jndi-name.
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.ensureMDBHasDestinationConfigured(MessageDrivenBeanInfoImpl.java:1811)
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.prepare(MessageDrivenBeanInfoImpl.java:1011)
     at weblogic.ejb.container.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:997)
     at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1273)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:372)
     Truncated. see log file for complete stacktrace
>
Any help really appreciated. It's too urgent.
Thanks in advance,
Piyush

here is the code for my bean.
package com.ups;
import java.util.logging.Logger;
import javax.ejb.ActivationConfigProperty;
import javax.ejb.EJBException;
import javax.ejb.MessageDriven;
import javax.ejb.MessageDrivenContext;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.MessageListener;
import javax.jms.TextMessage;
* Message-Driven Bean implementation class for: MessageBean
@MessageDriven(
          activationConfig = { @ActivationConfigProperty(
                    propertyName = "destinationType", propertyValue = "javax.jms.Queue"
public class MessageBean implements MessageListener {
     private MessageDrivenContext mdc;
* Default constructor.
public MessageBean() {
// TODO Auto-generated constructor stub
* @see MessageListener#onMessage(Message)
public void onMessage(Message message) {
     TextMessage tmsg = null;
try {
tmsg = (TextMessage) message;
System.out.println("MESSAGE BEAN: Message received: " + tmsg.getText( ));
System.out.println ("The onMessage() is called");
} catch (JMSException e) {
e.printStackTrace( );
mdc.setRollbackOnly( );
catch (Throwable th) {
th.printStackTrace();
public void ejbRemove( )throws EJBException{
     System.out.println("ejbRemove() is executed >>>>>>>");
I have configured my JMS Distributed queue in the Weblogic.
If possible please provide more details so that I can get rid of this error as soon as possible.
Thanks for reply.
Piyush

Security violation exception with Weblogic cluster installation on OIm 9.1

Hi,
I have OIM9.1 installed on weblogic 8.1 SP4 in clustered environment, which more often than not seems to work fine. But some time I get following exception on server console/log file which causes certain provisioning task to be rejected...
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
Caused by: javax.ejb.AccessLocalException: [EJB:010160]Security Violation: User: 'xelsysad
m' has insufficient permission to access EJB: type=<ejb>, application=Xellerate, module=xl
DataObjectBeans.jar, ejb=tcFormInstanceOperations, method=create, methodInterface=LocalHom
e, signature={}.
at weblogic.ejb20.internal.MethodDescriptor.checkMethodPermissionsLocal(MethodDesc
riptor.java:486)
at weblogic.ejb20.internal.StatelessEJBLocalHome.create(StatelessEJBLocalHome.java
:80)
at com.thortech.xl.ejb.beans.tcFormInstanceOperations_2j82mm_LocalHomeImpl.create(
tcFormInstanceOperations_2j82mm_LocalHomeImpl.java:93)
... 126 more
ERROR,19 Dec 2008 14:20:03,752,[XELLERATE.APIS],Class/Method: tcBaseUtilityClient/getLocal
Interface encounter some problems: {1}
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.in
Problem is, I get this exception only 4 out of 6 times (when it is least expected). I have googled, and tried all possible means but have't been able to resolve it. One more thing I am sure of is, it only comes with Weblogic installation not with Jboss. So there should be some configuration issue with weblogic installation.
Any suggestions would be useful...

No Response???
Where are the good guys??

OAM (10.1.4.3) Integration with WebLogic App Server (10.3.0 or below)

Hi All,
Can I use OAM 10.1.4.3 (Authentication Provider & Identity Asserter) to implement SSO with weblogic App Server 10.3.0 or below?
OAM 10.1.4.3 Authentication Provider & Identity Asserter is the recommended way to configure SSO with Web Logic App server 10.3.1 ( Oracle Middleware 11g).
And
OAM 10.1.4.2 uses WebLogic SSPI to configure SSO between OAM 10g and WebLogic App Server 10.3.0 or below.

Hi,
This is how the integration goes with different versions of WLS and OAM.
There is oamAuthnProvider.jar available with OAM 10.1.4.3 downloads. So it provides the assertion functionality.
Can I use OAM 10.1.4.3 (Authentication Provider & Identity Asserter) to implement SSO with weblogic App Server 10.3.0 or below?
Mahendra: Yes
OAM 10.1.4.3 Authentication Provider & Identity Asserter is the recommended way to configure SSO with Web Logic App server 10.3.1 ( Oracle Middleware 11g).
Mahendra: Yes, this is the recommended and easy approach.
OAM 10.1.4.2 uses WebLogic SSPI to configure SSO between OAM 10g and WebLogic App Server 10.3.0 or below.
Mahendra: Yes, older version of OAM uses SSPI connector installation.
HTH.
Mahendra.

Error while deploying application with WebLogic server

Hi,
I use Jdeveloper 11g and created and ADF application which i want to deploy with WebLogic Server.But i have an error which is :
"There was a failure when processing annotations for application C:\...\xxx.war. Please make sure that the annotations are valid. The error is oracle.adf.library.webapp.ResourceServlet "
Plz help me.
Thx

I am receiving same message for simple servlet. Running JDev11g build 5166 and embedded WLS 10.3. Servlet used to deploy to embedded WLS and ran fine. Recently running newly created servlets produces error message as in this thread.
Investigation turned up the fact that the class file for the servlet was not deployed to the context-root (o.j2ee\drs) on the server. Copying the class file from the mywork project folder to the context-root folder (o.j2ee\drs) permitted the servlet to run.
Don't know if this is the cause of what you are experiencing but it may assist in your investigation! I have not figured out why the class file for servlets does not deploy to server despite the fact that the log file shows war and ear files were deployed. As it turns out, the war file does not have the class file in it so something is wrong before the war file is created.
Cheers!

Error while using TXDataSource with Weblogic 6.1 & Oracle 8.1.6

Hi,
I am using Weblogic 6.1 and Oracle 8.1.6.
I have configured JDBC XA Connection Pool with Oracle thin driver. These are my settings...
Connection Pool:
Name - myXAPool
URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource:
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
I get the following error when I try to lookup the datasource. I am not sure where the problem is as I have configured Connection Pool and TXDataSource as mentioned in the documentation.
java.sql.SQLException: XA error: XAER_RMERR : A resource manager error has occured in the transaction branch start() failed on resource 'myXAPool' Unexpected error during start for XAResource 'myXAPool': null
It would be really great if you can help me out.
Thanks in Advance,
Sudhir.

Hi Sudhir,
If you do not know if upgrade or not, have a look here :
http://e-docs.bea.com/wls/docs61/notes/bugfixes2.html
Note that at the end of June SP3 will be released...
Sergi
"Sudhir Babu" <[email protected]> wrote:
>
Hi Sergi,
Thanks a lot for the class file, I figured out what the problem was. Actually
the
database version I was working with was 8.0.6.0. The Oracle driver doesn't
work with
this but the JDriver worked. This is the output of running CheckDriver..
DatabaseProductName : Oracle
DatabaseProductVersion : Oracle8 Enterprise Edition Release 8.0.6.0.0 -
Production
With the Partitioning and Objects options
PL/SQL Release 8.0.6.0.0 - Production
DriverName : Oracle JDBC driver
DriverVersion : 8.1.7.1.0
Then I tried on using the Oracle Driver on another instance which has the
version
8.1.7.1.0 and it worked. The JDriver and Oracle driver both work with this
database.
The output of CheckDriver for this Oracle instance is..
DatabaseProductName : Oracle
DatabaseProductVersion : Oracle8i Enterprise Edition Release 8.1.7.1.0 -
Production
With the Partitioning option
JServer Release 8.1.7.1.0 - Production
DriverName : Oracle JDBC driver
DriverVersion : 8.1.7.0.0
By the way I am working on WLS 6.1 SP1. What is the advantage of SP2 ? Should
I upgrade
Thanks once again,
Sudhir.
"Sergi Vaz" <[email protected]> wrote:
Hi Sudhir ,
JDriver works well, you can work with it.
Just for curiosity, can you run the class I attached using the "exact"classpath
of your WL instance (with Oracle drivers in front of weblogic.jar) ? What
is the
output ?
On which platform are you running your WLSP2 ?
Thanks
Sergi
"Sudhir Babu" <[email protected]> wrote:
Hi Sergi,
I just checked the things you mentioned. The connection pool starts correctly
without
any errors. I also made sure SELECT previlege was granted to DBA_PENDING_TRANSACTIONS.
I do have the JAVA_XA package installed and it has EXECUTE permission
to
PUBLIC.
I actually tried using the Weblogic JDriver (weblogic.jdbc.oci.xa.XADataSource)
and
it works perfect without any issue. The only consideration is that itis
a Type 2
Driver and needs to have the Oracle Client installed. But right now Ido
have it
installed on the same machine.
Do you know any known issues with Weblogic JDriver. Do you think it'sa
good idea
to go with it ?
Thanks,
Sudhir.
"Sergi Vaz" <[email protected]> wrote:
Hi Sudhir,
does your connection pool start correctly ?
Check the setup of your Oracle server too:
1) grant select on DBA_PENDING_TRANSACTIONS table to PUBLIC
2) package JAVA_XA installed (with grant execute to PUBLIC)
Sergi
"Sudhir Babu" <[email protected]> wrote:
Hi Sergi,
Thanks for the response. I downloaded the driver for 8.1.7 from Oraclesite
and put
it in classpath in front of weblogic.jar. I still get the same problem.
Is there
another location where we can download the Oracle driver with the bug
fixed
Regards, Sudhir.
"Sergi Vaz" <[email protected]> wrote:
Hi Sudhir,
I think you are using Oracle JDBC drivers 8.1.6.
They have a bug, they do not accept a foreign XID.
Use 8.1.7 or higher to solve this problem.
Sergi
Sudhir Babu <[email protected]> wrote:
Hi,
I am using Weblogic 6.1 and Oracle 8.1.6.
I have configured JDBC XA Connection Pool with Oracle thin driver.
These
are my settings...
Connection Pool:
Name - myXAPool
URL - jdbc:oracle:thin:@myServer:1521:myDb
DriverClassname - oracle.jdbc.xa.client.OracleXADataSource
TXDataSource:
Name - myXADS
JNDIName - myXADS
PoolName - myXAPool
I get the following error when I try to lookup the datasource. I amnot
sure where the problem is as I have configured Connection Pool and
TXDataSource
as mentioned in the documentation.
java.sql.SQLException: XA error: XAER_RMERR : A resource manager errorhas
occured in the transaction branch start() failed on resource 'myXAPool'
Unexpected error during start for XAResource 'myXAPool': null
It would be really great if you can help me out.
Thanks in Advance,
Sudhir.

How to resolve setPrefix() in SOAP(saaj API) with weblogic/webservices jar?

Hi,
I am facing a problem deploying a Web-Application in Weblogic containing SOAP related code.
My environment is as below:
1) Weblogic 8.1 SP2 server
2) Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_04-b05)
3) A method is exposed as web-service
4) A client program(which is a part of Action class of Webb-app) written with SOAP APIs containing the following section:
     MessageFactory mf = MessageFactory.newInstance();
     SOAPMessage sm = mf.createMessage();
     SOAPPart sp = sm.getSOAPPart();
     sp.setPrefix("soapenv");
     SOAPEnvelope se = sp.getEnvelope();
     se.addNamespaceDeclaration("soapenv","http://orion:7001");
giving the following error at runtime:
Exception in thread "main" java.lang.AbstractMethodError:
weblogic.were.soap.SOAPEnvelopeImpl.setPrefix(Ljava/lang/String;)V
at Client.main(Client.java:39)
I am able to compile without any error/warning all the time.
This is giving only when putting the saaj(jwsdp-1.4) jars along with weblogic/webservices jars in classpath.
I am able to run the same application(outside Web-application as a stand-alone java program) without
any error while not using weblogic/webservices jar in the classpath.
The saaj jars needed to run without any error are:
saaj-api.jar
saaj-impl.jar
mailapi.jar
activation.jar
xercesImpl.jar
xalan.jar
dom.jar
jdom.jar
I thinks this is a compatibility issue. Please suggest to resolve it.
Thanks in advance,
pal_sk

Hi,
I am facing a problem deploying a Web-Application in Weblogic containing SOAP related code.
My environment is as below:
1) Weblogic 8.1 SP2 server
2) Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_04-b05)
3) A method is exposed as web-service
4) A client program(which is a part of Action class of Webb-app) written with SOAP APIs containing the following section:
     MessageFactory mf = MessageFactory.newInstance();
     SOAPMessage sm = mf.createMessage();
     SOAPPart sp = sm.getSOAPPart();
     sp.setPrefix("soapenv");
     SOAPEnvelope se = sp.getEnvelope();
     se.addNamespaceDeclaration("soapenv","http://orion:7001");
giving the following error at runtime:
Exception in thread "main" java.lang.AbstractMethodError:
weblogic.were.soap.SOAPEnvelopeImpl.setPrefix(Ljava/lang/String;)V
at Client.main(Client.java:39)
I am able to compile without any error/warning all the time.
This is giving only when putting the saaj(jwsdp-1.4) jars along with weblogic/webservices jars in classpath.
I am able to run the same application(outside Web-application as a stand-alone java program) without
any error while not using weblogic/webservices jar in the classpath.
The saaj jars needed to run without any error are:
saaj-api.jar
saaj-impl.jar
mailapi.jar
activation.jar
xercesImpl.jar
xalan.jar
dom.jar
jdom.jar
I thinks this is a compatibility issue. Please suggest to resolve it.
Thanks in advance,
pal_sk

Sitraka JProbe Profiler with weblogic 5.1

Similar Messages

Maybe you are looking for