Sixth times a charm?

Someone please respond with something that will relate to my question! I see that people keep viewing my questions but no one even attempts to help me out. Are there any Apple employees online?? There is obviously a fix to this since my friend, who doesn't know much about computers, has fixed a similar problem before.
If you can't answer this, maybe you could refer me to someone that can, or give me an e-mail address to write my question to.
I'm having trouble importing a CD. I followed the directions listed by itunes:
• If iTunes doesn't recognize an audio CD (it doesn't appear in the iTunes window), quit iTunes, then open it again by double-clicking the application icon in the iTunes folder in the Program Files folder on your hard disk. Do not open it using the iTunes shortcut on your desktop. If iTunes now recognizes the CD, delete the iTunes shortcut and create a new one.
but it didn't work. The CD does not show up at all and there are no error messages, but the computer makes a noise as if it recognizes that there is something in there. I had the same problem with another cd months ago and luckily a friend was able to figure it out for me, but she no longer remembers what she did. Any suggestions?

Are you using a an AC adapter to charge the Touch?
If so where did you get it from ?
If not does the computer "sleep" when the Touch is hooked up to charge ?
In the first case the adapter may be the problem in the second a sleeping computer will drain the charge from the Touch and you say you do that every day.
If none of the above applies take the Touch to a friend's who has an Apple usb charger, or any charger from a reputable maker who isn't charging $2.95, and try charging it there and on his computer.
If it still doesn't work you've got another dud, the odds are huge but it must happen to someone sometime and it's your bad luck it's you, so descend on Apple and get another.

Similar Messages

Third Times a Charm?????

Okay, I'm on my THIRD yes, I said THIRD iPod Touch. My first one stopped turning on and then it gave me the Apple screen of death and stopped loading altogether. I went to the Apple store as it was still under warranty. The "refurbished" one they gave me only lasted about a month before it did the same thing as the first. I was able to swap the second one out for a third. I'm having the same issues. I have already downloaded iTunes more than once. I have done iPod restores more than once. Now my third one only turns on when it wants to. I have gotten the Apple icon of death more than once, and then wait a day or two and then it comes back to life. Sometimes it turns on without any issues but 95% of the time, I have to do the "reset" more than once for it to turn on, and then it will say that the battery is dead (red battery symbol), but that can't be true because I charge it every night for at least 4 hours and turn it off at night.
My question is, I have done everything I know to do, and this is my third one. I know my iTunes is working because my Nano works like a charm....so it has to be the iTouch. Does anyone have any more suggestions OR has anyone else experienced this same issues? I have had the same issues with and without the new 3.0 version so I don't think that is really the problem. HELP PLEASE I'm so frustrated!

Are you using a an AC adapter to charge the Touch?
If so where did you get it from ?
If not does the computer "sleep" when the Touch is hooked up to charge ?
In the first case the adapter may be the problem in the second a sleeping computer will drain the charge from the Touch and you say you do that every day.
If none of the above applies take the Touch to a friend's who has an Apple usb charger, or any charger from a reputable maker who isn't charging $2.95, and try charging it there and on his computer.
If it still doesn't work you've got another dud, the odds are huge but it must happen to someone sometime and it's your bad luck it's you, so descend on Apple and get another.

2nd time is charm - Need sharepoints without permissions

Due to some really strange problems that had come up recently, I am rebuilding our server (OS X 10.4.x unlimited). On my Storage HD, where all user files are stored we have a limited number of folders at the root level - each with a host of user folders within each one. This time around I would like to set the main folders up so that anyone that gets access to the user folder, can read and write to any files within that folder. Before this, we have had problems where only the person that created the file or last saved it got the right to over write the file, so people were getting creative with file names and ending up with multiple versions of the file, as a result of the collaboration they were doing. They had no server for many many years and were used to anyone opening any other person's Word or Excel file(s) and they want that capability back. Users log into server, each with their own name and password. Then use Word and Excel, etc. installed on their local system to open, change, and save the files to the server.
This should be simple, but I don't deal with OS X Server very much, and that's a part of the challenge. Any direction would be greatly appreciated.
Currently I have selected the volume users would access and gotten info, and in the permissions area, checked the box that says "Ignore ownership on this volume" but I'm sure there is more to it than that.
TIA!

The above along with setting up the two folders as share points with inherited permissions seems to be the solution.

WHERE IS THE REFRESH BUTTON FOR THE SIXTH TIME

Where is the refresh button for the seventh time. I cannot refresh

In addition to the above posted by James:
Click the Refresh button on the right hand side of the location bar container on the Navigation Toolbar or press "Ctrl + R" or F5 to reload a web page.
Firefox 4 later use a combined Stop/Reload/Go button that is positioned at the right end of the location bar.<br />
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button.<br />
If you type in the location bar then that button becomes a Go button.<br />
Middle-click the Reload button to duplicate the current tab to a new tab.<br />

Three times a charm!

Okay so I had the common buzzing/noise from the power brick. I went to the Apple store twice last week and decided that I had enough. When you pay $1500 of your hard earned money for a product that buzzes, you can only take so much. I was on my 13th day with this first generation machine.
I went home the first two days without any success and today I received a new Apple adapter in the mail. That, too, had the buzz. As I used the machine I also noticed that the lid was not overlapping the bottom correctly. In other words, it was not flush with one another. I went today and the Apple Genius gave me a hand and actually listened to it and respected my position. There are decent human beings out there! YAY! Long story short, I left with a new MacBook and it is quieter and less loud than the one I bought nearly two weeks ago.
Thank goodness this all worked out. Keep trying because it pays off in the end. Good luck to everyone!
- Jay

http://discussions.apple.com/thread.jspa?threadID=505976&tstart=0
This moo, I swear...drives ME nuts, I'm sorry you have it.

2nd times a charm

just received my second mbp, no whine, heat slightly higher than g4 powerbook 17, optical drive working ... looks like this one is ready to rock
just wanted to say there is a huge difference between this 17 and the original one purchased three weeks ago

yesterday was day 14, went to the apple store b/c my mbp 17 gets really warm above the number keys all the way across ... the genius bar showed me where the vents blow out (same location) ... it took two weeks for the custom order (7200 rpm) to get here when I sent the first one back b/c the optical drive was freezing .. could not afford the downtiime again
just wondering if this is too hot? when i touch above say number 3 (it's hot, but not so hot that I would be "forced" to remove my finger from searing pain) seems like they all run about that .. if that's the cost of having this much portable performance in a package this small (relatively) I'm ok with it
just wondering what the general consensus was

I have the newest version of itunes 11.1.3.8. I have one song that i want moved from itunes to my iphone WITHOUT erasing my iphone playlists which happens each time i sync. please help

I have the newest version of itunes 11.1.3.8. I have uploaded a CD into my itunes library. I would like to add one song only to my iphone. I have created playlists on my iphone and each time I sync all of my iphone playlists get erased and I have to recreated them. after the sixth time, I am very hesitant to do any kind of syncing. Is there a way to just move one song without syncing? I have read some posts that talk about this but have not been able to do it. For example, the "summary tab" does not exist on my version of itunes. I tried drag and drop on itunes as explained in their help section but that did not move the song to my iphone. Please help

You are probably running OS 10.4 or 10.5 on a PPC Mac. No version of iTunes higher than 10.6.3 is available for these older Macs. I have the same problem, and while I can still use the PPC to sync my iPod, it can't be used to sync an iPhone 4 or higher. The only solution, as I discovered after upgrading to the iPhone 4, is to buy a newer Mac. I was able to get a 2006 MacBook running Lion for under $300, and that has been a lifesaver.

Solution Manager Service Desk & ChaRM Integration

Hi All,
I have query on integration between Solution Manager Service Desk & ChaRM. As we know u2013 it is possible to create a change request from service desk if the incident requires a change in the satellite system. In this case even we can see the list of all change requests (if we raise more than one) as connected / reference documents.
But we observe that it is possible to close the Service Desk request even if the ChaRM request is not closed / abandoned.
Just want to know if there is any configuration in Service desk, using which we can prevent the user from closing the incident in sevice desk till the time the ChaRM change request has not got closed.
Any pointers in this regard are welcome. Thanks a lot.
Best regards,
vithal

You can control using BADI development. Any Check or Save ( ORDER_SAVE ) badi you can write the condition based on the change document availablity.

Anybody use Transport Copies using CHaRM

Hi
Did anybody use transport copies options in CHaRM? When I use it's displaying only the transport created using CHaRM. But I need the transport created outside CHaRM?
By the time configured CHaRM, developer already working on the development system and created quite bit of Transport requests. Now wants to include all those transport request into CHaRM created transport request.
Looking for 2 options.
1) Register Transport Requests
2) Transport Copies
Tried both are not working. If any otherway please suggest.
Thanks
Ava

Hi,
The option 'Register Transport Requests' will only link the outside transports to the maintenance cycle. You can't work on these transports through a Correction Document (such as Normal Correction ).
In case you have already created transports outside of chaRM and these transports are not yet released you can do the following:
1. Create a Change Request and Correction Document
2. Create a transport request from this correction document
3. In the development system to go to se09 and use the option 'Merge Requests' (and not include objects). This will delete the previous request and move all your objects to the request created through chaRM (and you will not run into any lock issues).
4. For the transports which are released you can use the 'Include Objects' option.
The transport of Copies functionality when used from within ChaRM will create a copy of your original transport and move it to the QAS system. It will not load the production buffer. In case you find any issues while testing in QAS, you can still go back in DEV and add changes to te original transport request. This way all your work gets added to the same TR and you can keep doing transport of copies for testing in QAS. Once your are ready you can release your original TR.
Thanks,
Kriti Bhalla.

Error while executing a Package in Parallel.

Hi All,
We are trying to execute a package in parallel. Our execution stopped while when the package is running for the sixth time. The error for that execution is as follows :
ODI-1241: Oracle Data Integrator tool execution fails.
Caused By: oracle.odi.runtime.agent.invocation.InvocationException: HTTP/1.1 500 Could not get JDBC Connection; nested exception is java.sql.SQLException: Exception occurred while getting connection: oracle.ucp.UniversalConnectionPoolException: Cannot get Connection from Datasource
at oracle.odi.runtime.agent.invocation.RemoteRuntimeAgentInvoker.invoke(RemoteRuntimeAgentInvoker.java:271)
at oracle.odi.runtime.agent.invocation.support.InternalRemoteRuntimeAgentInvoker.invokeStartScenario(InternalRemoteRuntimeAgentInvoker.java:149)
at com.sunopsis.dwg.tools.StartScen.actionExecute(StartScen.java:266)
at com.sunopsis.dwg.function.SnpsFunctionBaseRepositoryConnected.execute(SnpsFunctionBaseRepositoryConnected.java:155)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:3185)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execIntegratedFunction(SnpSessTaskSql.java:1414)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2785)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1818)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$2.doAction(StartScenRequestProcessor.java:559)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
.....Some more
Can anyone suggest your pointers on this.?
Regards.

It looks like you have exceeded the number of connections available for the datasource. Try checking your connection pool settings.

Saving Dialog Box - how to save to a folder 3 layers deep

Finally through the leopard install!! 3 times a charm
I know this is a really basic question... but how do you save directly to a folder a few layers deep in my folder set up. I click on file save as.... then click on the "where" drop down box but I am unable to click through to the folder I want. It seems basic (was able to do this easily through a PC years ago) have never found out so I thought I would post here.
Appreciate any solutions.
Thanks

Click the large blue button with the downward pointing triangle on it next to the filename box in the "Save" dialog & it will expand into a fully navigable Finder-like view of the file system, complete with a toolbar containing the Spotlight search box (very useful for finding folders by name); a selector for list, icon, or column view; forward & back buttons; & even the sidebar.
In this expanded view, you should be able to navigate to any conceivable folder location as easily as with the Finder.
BTW, if you happen to have a Finder Window open & accessible, you can also drag & drop a folder from it into the "Save" dialog & it will select it as the location.

Phone not responsive after recent software update

I have just updated my phone (iPhone 5) with the most recent software update and it's now "died". It was 100% charged and I'm now faced with an unresponsive phone which just shows the "plug to iTunes" visual.
Anyone else have the problem and know how to resolve it?
*Frustrated*
PS did it for my iPad and it went through no problems.

You're right. Just tried for the sixth time. Thank you. What a productive Monday afternoon!

Kernel Panic: You need to restart you computer. Hold down the Power button until it turns off, then press the Power button again.

I apologize for writing a book, but I think explaining the full story may possibly get me a correct answer. I hope that someone can give me some insight as to what is the problem with my MacBook Pro. I have a MacBook Pro (15-inch Early 2008), model identifier: MacBookPro4,1 running OSX Lion 10.7.5 with 6 GB memory. My wife first noticed a problem with the display. Every so often it would get fuzzy with jumping lines going across the screen making it vitually unviewable. The final time that incident took place the computer froze which required holding down the power button to restart the computer. The computer started up to the point of the Apple logo and the spinning gear for quite some time until the screen darkened from top to bottom displaying the following message in five different languages: "You need to restart your computer. Hold down the Power button until it turns off, then press the Power button again." I have read other blogs and support communities where people get the message intermittently, but my computer would not go past that point no matter what. Through research and the Apple Store I was told that this is a Kernel Panic. The so called "Apple Genius" at the local Apple Store was unable to get the computer to boot past that point even with his gadget. It would not startup in recovery mode, safe mode or off of a disc. I forget exacty what he told me, but he said it was getting past the first two startup steps, but it would not get past the third step which is to mount the desktop. He guessed that it may be a problem with the hard drive; a loose wire or something or other. I disconnected the hard drive completely and took it out. Everything appered to be connected properly. Then I installed it back correctly, but it did not solve the issue. So I guess I disproved his theory of a loose wire... I purchased ProSoft Data Rescue 3 and connected my MacBook Pro to another Apple computer using a firewire 400 cable. I was able to get everything I needed off of the hard drive. I did some more research and I decided to restart the MacBook Pro in verbose mode (holding down the command button and V button). The computer magically started up!!! I was upset that I wasted my money on the ProSoft Data Rescue 3. I managed to take additional items off of the computer and back it up on to an external hard drive. After some time the computer froze. I repeated the power button process to restart and received the same kernel panic. I managed to get the computer to startup approximately six or seven more times via verbose mode; each time the computer staying on for a shorter amount of time before it would freeze. I managed to run Disk Utitlity. I performed first aid to fix the hard drive and it said that the hard drive appeared to be fine. After first aid I erased the hard drive and booted off of a Lion disc to perform a clean install or an erase and install. Lion installed until the progress bar got the the end where I received a message that there was an error installing Lion, please try again. Each time I attempted to install the software I would receive the same message. Eventually the computer would not boot from the Lion disc. I went back to the Apple Store and the Apple Genius was able to get the computer to boot off of his gadget where Lion istalled completely. I set up the computer as a new computer. He said that he partitioned the hard drive as DOS and then back to Mac OS Extended (Journaled) which would get rid of any errors the drive may have had. He guessed that the problem was the hard drive, but was not exactly sure. When I brought it home I installed all of the software applications I had on it previously. Approximately three days later, which may have been the fifth of sixth time starting up the computer, the display became fuzzy again and the computer froze. The computer did restart once and I was able to retreive a "log" which I have pasted below. After if froze for the second time it restarted once using verbose mode and froze almost immediately. After holding down the power key to shut it down and then restart; I received the same kernel panic after the Apple logo and spinning gear which put me right back to square one. Now the computer will not boot via any method. It freezes at the end of verbose mode which forces you to hold down the power button to shut down. I also read that poorly seated ram may cause this issue, but I removed and installed the ram multiple times. I even purchased new ram from Other World Computing (Mac Sales) 6 GB, but that did not make a difference. I think I may see six possible problems on the verbose screen mode, five errors and one warning; I will type them out here:
1. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key $Num (kSMCKeyNotFound)
2. SMC: :smcReadKeyAction ERROR: $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0
3. SMC: :smcInitHelper ERROR: MMIO regMap ==NULL - fall back to old SMC mode
4. WARNING - ACPI_SMCCtrlLoop: :initCPUCtrlLoop - no sub-config match for MacBookPro4,1 with 8 p-states, using default stepper instead
5. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key MOTP (kSMCKeyNotFound)
6. SMC: :smcReadKeyAction ERROR: smcReadData8 failed for key BEMB (kSMCKeyNotFound)
I was hoping that someone could read my log to ascertain wether or not they see a problem that stands out. I was also hoping that someone could tell me if verbose mode provides any information that may be wrong with my computer. I just hope that someone can give me some insight as to what may be wrong with my computer. If it is the hard drive I will easily replace it, but I want to make sure that is the problem first before I waste money on a hard drive or anything else. Please let me know if anyone requires any other information from me.
Thank you!
Interval Since Last Panic Report: 21959 sec
Panics Since Last Report:          1
Anonymous UUID:                    B62D9AB4-53DD-4F76-90B2-32453302297E
Sat Aug 31 15:20:06 2013
panic(cpu 1 caller 0xffffff80002c4794): Kernel trap at 0xffffff7f81d9d774, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000010, CR3: 0x0000000011d06000, CR4: 0x0000000000000660
RAX: 0x0000000000000004, RBX: 0xffffff809eb71000, RCX: 0xffffff8000892604, RDX: 0xffffff80b69d3aa8
RSP: 0xffffff80b69d3bd0, RBP: 0xffffff80b69d3bd0, RSI: 0x0000000000000000, RDI: 0x0000000000000000
R8: 0x0000000000000000, R9: 0x00000000010751b4, R10: 0xfffffffffffffff4, R11: 0xffffff8000640fd4
R12: 0xffffff809eb71000, R13: 0x0000000000000000, R14: 0x0000000000000000, R15: 0x0000000000000010
RFL: 0x0000000000010202, RIP: 0xffffff7f81d9d774, CS: 0x0000000000000008, SS: 0x0000000000000010
CR2: 0x0000000000000010, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff80b69d3880 : 0xffffff8000220792
0xffffff80b69d3900 : 0xffffff80002c4794
0xffffff80b69d3ab0 : 0xffffff80002da55d
0xffffff80b69d3ad0 : 0xffffff7f81d9d774
0xffffff80b69d3bd0 : 0xffffff7f81d8913a
0xffffff80b69d3c20 : 0xffffff7f81d89928
0xffffff80b69d3c40 : 0xffffff7f81d5be8f
0xffffff80b69d3c70 : 0xffffff7f8087f832
0xffffff80b69d3cb0 : 0xffffff7f8087f93d
0xffffff80b69d3cd0 : 0xffffff7f8088b625
0xffffff80b69d3d40 : 0xffffff7f80889c76
0xffffff80b69d3d80 : 0xffffff80006245ca
0xffffff80b69d3dd0 : 0xffffff8000657d4e
0xffffff80b69d3e30 : 0xffffff80002a3851
0xffffff80b69d3e80 : 0xffffff8000223096
0xffffff80b69d3eb0 : 0xffffff80002148a9
0xffffff80b69d3f10 : 0xffffff800021bbd8
0xffffff80b69d3f70 : 0xffffff80002aef10
0xffffff80b69d3fb0 : 0xffffff80002daec3
      Kernel Extensions in backtrace:
         com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000->0xffffff7f808acfff
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
         com.apple.GeForce(7.3.2)[7E1D7726-416F-3716-ACCB-E1E276E35002]@0xffffff7f81d590 00->0xffffff7f81e1bfff
            dependency: com.apple.NVDAResman(7.3.2)[97284661-2629-379E-B86B-D388618E8C30]@0xffffff7f808 bf000
            dependency: com.apple.iokit.IONDRVSupport(2.3.4)[7C8672C4-8B0D-3CCF-A79A-23C62E90F895]@0xff ffff7f808ad000
            dependency: com.apple.iokit.IOPCIFamily(2.7)[5C23D598-58B2-3204-BC03-BC3C0F00BD32]@0xffffff 7f80849000
            dependency: com.apple.iokit.IOGraphicsFamily(2.3.4)[D0A1F6BD-E66E-3DD8-9913-A3AB8746F422]@0 xffffff7f80874000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
11G63
Kernel version:
Darwin Kernel Version 11.4.2: Thu Aug 23 16:25:48 PDT 2012; root:xnu-1699.32.7~1/RELEASE_X86_64
Kernel UUID: FF3BB088-60A4-349C-92EA-CA649C698CE5
System model name: MacBookPro4,1 (Mac-F42C89C8)
System uptime in nanoseconds: 62230646656
last loaded kext at 53384504695: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f81efc000, size 45056)
loaded kexts:
com.apple.filesystems.autofs 3.0
com.apple.driver.AudioAUUC 1.59
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleUpstreamUserClient 3.5.9
com.apple.driver.AppleHDAHardwareConfigDriver 2.2.5a5
com.apple.driver.AppleHDA 2.2.5a5
com.apple.GeForce 7.3.2
com.apple.driver.SMCMotionSensor 3.0.2d6
com.apple.driver.AppleSMCPDRC 5.0.0d8
com.apple.driver.AppleSMCLMU 2.0.1d2
com.apple.driver.AppleMuxControl 3.1.33
com.apple.driver.AppleBacklight 170.2.2
com.apple.driver.AppleMCCSControl 1.0.33
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.iokit.IOBluetoothSerialManager 4.0.8f17
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AudioIPCDriver 1.2.3
com.apple.driver.ApplePolicyControl 3.1.33
com.apple.driver.ACPI_SMC_PlatformPlugin 5.0.0d8
com.apple.driver.AppleLPC 1.6.0
com.apple.driver.AppleUSBTCButtons 227.6
com.apple.driver.BroadcomUSBBluetoothHCIController 4.0.8f17
com.apple.driver.AppleUSBTCKeyEventDriver 227.6
com.apple.driver.AppleUSBTCKeyboard 227.6
com.apple.driver.AppleIRController 312
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 33
com.apple.iokit.SCSITaskUserClient 3.2.1
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.1.0
com.apple.iokit.AppleYukon2 3.2.2b1
com.apple.driver.AppleUSBHub 5.1.0
com.apple.driver.AppleAHCIPort 2.3.1
com.apple.driver.AppleEFINVRAM 1.6.1
com.apple.driver.AirPortBrcm43224 501.36.15
com.apple.driver.AppleFWOHCI 4.9.0
com.apple.driver.AppleIntelPIIXATA 2.5.1
com.apple.driver.AppleUSBEHCI 5.1.0
com.apple.driver.AppleRTC 1.5
com.apple.driver.AppleUSBUHCI 5.1.0
com.apple.driver.AppleHPET 1.7
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleACPIButtons 1.5
com.apple.driver.AppleSMBIOS 1.9
com.apple.driver.AppleACPIEC 1.5
com.apple.driver.AppleAPIC 1.6
com.apple.driver.AppleIntelCPUPowerManagementClient 195.0.0
com.apple.nke.applicationfirewall 3.2.30
com.apple.security.quarantine 1.4
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 195.0.0
com.apple.kext.triggers 1.0
com.apple.driver.DspFuncLib 2.2.5a5
com.apple.nvidia.nv50hal 7.3.2
com.apple.nvidia.nvGK100hal 7.3.2
com.apple.nvidia.nvGF100hal 7.3.2
com.apple.NVDAResman 7.3.2
com.apple.iokit.IOFireWireIP 2.2.5
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.driver.AppleSMBusController 1.0.10d0
com.apple.driver.AppleHDAController 2.2.5a5
com.apple.iokit.IOHDAFamily 2.2.5a5
com.apple.iokit.IOSurface 80.0.2
com.apple.iokit.IOSerialFamily 10.0.5
com.apple.iokit.IOAudioFamily 1.8.6fc18
com.apple.kext.OSvKernDSPLib 1.3
com.apple.driver.AppleGraphicsControl 3.1.33
com.apple.iokit.IONDRVSupport 2.3.4
com.apple.iokit.IOGraphicsFamily 2.3.4
com.apple.driver.AppleSMC 3.1.3d10
com.apple.driver.IOPlatformPluginLegacy 5.0.0d8
com.apple.driver.AppleSMBusPCI 1.0.10d0
com.apple.driver.IOPlatformPluginFamily 5.1.1d6
com.apple.driver.AppleFileSystemDriver 13
com.apple.driver.AppleUSBBluetoothHCIController 4.0.8f17
com.apple.iokit.IOBluetoothFamily 4.0.8f17
com.apple.driver.AppleUSBMultitouch 230.5
com.apple.iokit.IOUSBHIDDriver 5.0.0
com.apple.driver.AppleUSBMergeNub 5.1.0
com.apple.driver.AppleUSBComposite 5.0.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.2.1
com.apple.iokit.IOBDStorageFamily 1.7
com.apple.iokit.IODVDStorageFamily 1.7.1
com.apple.iokit.IOCDStorageFamily 1.7.1
com.apple.iokit.IOATAPIProtocolTransport 3.0.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.2.1
com.apple.iokit.IOUSBUserClient 5.0.0
com.apple.iokit.IOAHCIFamily 2.0.8
com.apple.iokit.IO80211Family 420.3
com.apple.iokit.IONetworkingFamily 2.1
com.apple.iokit.IOFireWireFamily 4.4.8
com.apple.iokit.IOATAFamily 2.5.1
com.apple.driver.AppleEFIRuntime 1.6.1
com.apple.iokit.IOUSBFamily 5.1.0
com.apple.iokit.IOHIDFamily 1.7.1
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 177.11
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.DiskImages 331.7
com.apple.iokit.IOStorageFamily 1.7.2
com.apple.driver.AppleKeyStore 28.18
com.apple.driver.AppleACPIPlatform 1.5
com.apple.iokit.IOPCIFamily 2.7
com.apple.iokit.IOACPIFamily 1.4
Model: MacBookPro4,1, BootROM MBP41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 6 GB, SMC 1.27f3
Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 256 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR2 SDRAM, 667 MHz, 0x7F7F7F7F7F9B0000, 0x4354353132363441433636372E4D31364643
Memory Module: BANK 1/DIMM1, 2 GB, DDR2 SDRAM, 667 MHz, 0x7F7FBAFFFFFFFFFF, 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.15)
Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en1
Serial ATA Device: Hitachi HTS543225L9SA02, 250.06 GB
Parallel ATA Device: MATSHITADVD-R   UJ-867
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x820f, 0x1a110000 / 5
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd400000 / 2
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0230, 0x5d200000 / 3
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0x5d100000 / 2

I had already written a book and I did not want to bombard people with more information, but in my previous research I did come across the major issues with the NVIDIA card. I also was well aware that Apple offered a replacement program that ended in December of 2012. I was going to add that in my original post, but I discounted that theory because I put my faith in the so called "Apple Genius" when I made my second trip to the Apple Store. I brought the NVIDIA card issue to his attention and asked him if he thought that may be the problem, but he said no. He said if it was the NVIDIA card that the screen would be completely black and there would be no startup chime. When I experienced the screen issues I thought it was a problem with the NVIDIA card or the logic board. I asked myself, how can a flawed hard drive cause the screen to act funny.
nbar and Rick Warren, I thank you both for your help and insight; people like you are the real "Apple Geniuses." I was hoping there was a way I could wipe the hard drive before I dumped the computer or attempted to sell it. I guess I will look into purchasing a new machine when I have the funds. Again...thank you both!

Ex-Uverse customer not happy with being a new Fios customer

We just had our Fios Triple installed on Saturday 9/30/13. I was a very happy Uverse customer. We moved to Verizon territory and we wanted something similar so we chose Verizon vs Direct TV and Charter Cable. Verizon Fios is far inferior to my experience with AT&T Uverse. It wasn't just one person but the whole experience. I never called AT&T's customer service in the years we had it. We had no problems. I just got off the phone for the sixth time since our install and it hasn't been a week yet.
Issue 1) Installer called at 8:30am to tell us he needs to come earlier than our 10am-3pm appointment. I explained we were moving and was signing the lease at 9am that is why we set a 10am-3pm appointment so we would have the key, TVs and phone in our place ready for the install. The installer said well he was scheduled for 2 appointments during that time frame so he doesn't know if he could make it at all if he doesn't come now. I told him it was ok to come after 3pm but please call and let us know since we are moving in. I thought about the situation and as a former dispatcher myself, I knew we shouldn't have gotten that call. I called customer service to let them know installer might not be able to show at all and gave them heads up. We got a call back from the installer telling us he will keep the set appointment time. He showed at 1pm
Issue 2) The installer showed with a bad attitude. Our place was already set up for Fios. The previous resident had it installed so it shouldn't have been a hard job. He was complaining he needed to drill a hole to install the Router in the living room. I told him no problem the hole can be covered with the TV and furniture. There was only one wall that the TV could go on so I asked what was the alternative outside of canceling the order. He placed a small hole next to the Verizon box so I wasn't sure what his issue was. It was obvious he didn't want to come to work that day. He took what I thought a long time to set up DVR, Set Top Box,router and phone. I tried hard not to compare AT&T installer to Verizon installer because people have different personalities. This installer wasn't friendly and AT&T went out of his way to tell us what he was doing, gave us feedback and walked us through all three. To put the icing on the cake, he left a nice sheet with our new phone number, att.net email, Uverse URL, wireless network connection name and key and if we had any questions in the next few days, we could call him directly since he was familiar with our set up. The Verizon installer went over the remote and left the channel line up brochure. He told us if you need the wireless network connection info for the devices, the numbers are on the back of the modem. (Do you know how many numbers are on the back of the modem???) I know how to find the numbers but my husband didn't so I had to tell him which ones.
Issue 3) After the install we went back to the old house and got more stuff to move. My husband said he wanted to record Homeland on Showtime can I do it from my phone like I did with Uverse. It took me 1 hour to figure it out because the website wasn't mobile so it wasn't working. I had to download 3 apps to figure out which one to use. I was so proud that I figured it out. It wasn't intuitive and it confirmed I had scheduled the recording. Monday morning I'm in front of the DVR to check my scheduled recordings. Homeland was there but didn't play. Called customer service..They said you have the Extreme HD. You need Ultimate HD. I told them I'm a customer and the names mean nothing to me. I wanted the package that had Showtime but didn't need HBO. When I placed the order originally, I told the sales agent I wanted a similar package to what we had with Uverse. I mentioned we watch Lifetime, Showtime, the Movie Channel and sports but we were going to suck it up that Uverse got Pac 12 channel last week and Fios doesn't have it. I pulled out the channel brochure and saw that there are no movie channels with the Extreme package. I think of 2 errors-1) Give us the channels we want and 2) Why was I able to appear to record from a channel we didn't subscribe to but I was made aware of the 3rd error when the new agent was confirming my order. The price for more channels was cheaper!!! Now I'm not happy at all!!!
Issue 4) I had to look up the phone number on my account. It wasn't in the confirmation email order and of course I had to call customer service once again to get full access to my account online because the call never came through with my full access activation code. I got the code and went to set up my voice mail. I couldn't. I called customer service again and was told I didn't have a voice mail box set up on the server. I asked why. The tech said it wasn't on the order so we didn't now you wanted it. I asked is there an extra charge doesn't it come with Fios voice he said yes then I asked why isn't it just set up. He said how are we suppose to know you want it!!! I've been ordering landlines and cell phones since the 70's. I've never had to tell anyone I want voice mail. All I had to do was set it up.He said well I'll add it and it could take up to 24 hours before you can set it up.
Issue 5) I record Scandal and schedule to record on all types since we have HD in the living room and SD in the bedroom. We decide to watch half in the living room and the other half in the bedroom. You know the problem there.. CAN'T. I'm still frustrated with Verizon but haven't reached the boiling point until...I can't record on Monday night The Voice and Dancing With the Stars at the same time at 8pm and Hostages and Black List at 10pm. I see 8pm shows recording as the same time as the 10pm because the networks end the shows at 10:01pm. I said well lets see if in the future one of the shows are on Video On Demand. Click on VOD and it says Temporarily Unavailable. SERIOUSLY!!!! I call customer service. I get a tech. He transfers me to a sales agent to make sure I have VOD in my package. She gets an ear full of my problems and gives me a $20 discount per month for 12 months. I didn't boil over..Still frustrated but appreciated that finally someone tried to make me happy. She transfers me to tech to fix DVR issues and VOD. Tech can't fix SD/HD or recording my 4 Monday night shows. The DVR has limitations that I didn't have with Uverse. VERIZON -time to get up to speed and fast with your DVR limitations. It can be solved with allowing more recordings at the same time...DUH!! You guessed it..Video on Demand was never set up for our account. It will take up to 24 hours to add this service that even comes with the basic Fios!!! I asked the tech how does this happen! When an order is placed isn't there a check list to make sure all the features are activated. He said yes but the agent didn't order VOD. Now to me that makes no sense for the agent to have to order set up for something that comes with a package. It should be a part of the check list.
Verizon..All I can say is, you guys have got to get this together. There needs to be a customer complaint hotline because I now get to tell everyone on this forum and all my social media accounts how poor your set up for new customers and how your DVR service is lacking. I asked during each call if there was a general customer relations department for Fios one agent said yes and gave me the number to Verizon Wireless customer relations...oops!! I happen to be a wireless customer and they got an ear full and apologized for your incompetence. They didn't have a number and got off the phone embarrassed that they shared the same name.

Hi Lisacpt,
Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

Problem with publishing in cs5

Hi, we seem to be expiriencing the following issues with cs5 trial version.
The problem:
After making changes to a perfectly working fla it won't publish correctly,
meaning:
1. When previewing all the components jump (as usually happens when there is
a compile error) but no error is displayed in the log.
In this case when used with the whole project, the project doesn't load,
even though the corrupted fla is not the first loaded (non of the fla loads
besides the preloader).
2. When previewing and running with the whole project the labels on the
button components disappear, but only the ones that are dynamically changed
by an external as file.
*there are other similar bugs as well like unable to enter the table in the
game etc.
The changes I make before it happens:
- changing the size of a shape inside a movie clip.
- changing the size of a movie clip.
- changing anything in an already existing code (like changing the size of a
font).
- adding new basic code anywhere (like trace code).
- changing button skins.
Basically, any change I make corrupts the file but not consistently,
meaning,
I can make the same change twice and the file will break only one of the
times, or, I can make several changes until it breaks.
It also happens on every computer but also, not consistently, I can work for
a while, making the same change, deleting, making the change again etc, only
on the fifth or sixth time the file will break. On a different computer it
can take only two or three times.
The corrupted file start working again after I change the name of the folder
containing my project or move all the files to a different folder anywhere
on my computer. After a short while the file crushes again.
p.s, i used the latest cs5 updates and that did not solve the problem.
thanks in advance.
David.

Seems you have encountered a weird problem. I have been using CS 5 for quite sometime now without any such issues.
Would it be possible for you to share an example fla that is causing the problem.
It would be great if you could provide a copy of the fla that gets published ( before making changes)
and a copy of the fla that is broken ( after making changes)
If it is possible for you to provide the fla then probaby I could help you out in finding the issue.

Sixth times a charm?

Similar Messages

Maybe you are looking for