Size & content of the compiled file from Forms Builder (Oracle Developer 6)

Hi all.
Two files resulted from the compilation of the same form are different according to byte-to-byte comparison (security requirements of the customer). What could be the reason of this? Any suggestions?
Thanks in advance.
Igor.

I doubt you will find any documentation about the content or size.
I take it you are curious about the size and content in the .fmx file, but there is an even more dramatic difference in size of the .fmb file depending on how it is saved.
You can read up on it here:
Re: FMB size shrinks dramatically
and
Re: Why does this happen - find ';', replace with ';'?
You can see the .fmx size balloon if you compile the fmb after doing a semicolon - semicolon replace, IF you don't first save, close, then re-open the fmb file.
In fact, if you are seeing the fmx size change, it may be related to that problem with the fmb. Here at our site, developers ALWAYS do the semicolon - semicolon replace and save and close without compiling with EVERY form they work on. It guarantees that when the fmb is compiled at the users sites, they get a clean fmx.
You might, in fact, try comparing two fmx files generated from a "clean" fmb, and see if the two compare the same or different. ( Please let me know! )

Similar Messages

"Distribution Certificate is not valid" - error downloading the ZIP file from App Builder

Hello everybody,
I'm trying to download the Distribution App (.ZIP) from App Builder.
- The App is made with a Professional account
- The app is a Multi-folio for iPad-iPhone
- The App has the Push notifications option activated
- I made a couple of Push Certificates (production + developing), I checked on Apple Keychain and they are valid (green dot)
- I made a new App ID with Push Notification option enabled
- I made a couple of mobileprovision files (production + developing) based on the App ID and
- I download the .IPA and it work
The App Builder report this error: "This is not a valid Apple Distribution Certificate"
Any ideas?
Is this related to the Pro account and the fact that I made another App for Android?
Has someone the ability to try using the same settings to understand if it is a bug or a real issue?
Thanks,
Andrea Spinazzola
Ps.: Obviously, we are on deadline...

Hi Neil,
as you can imagine reading my list, I already do everything you suggested to me.
So It's not my mistake, I need to know if it is a bug or a known behavior.
When I'm talking about Pro Account and Android App, I mean that a Pro Account is for only one "project" (no more infinite Apps as in the past) and due to a content issue, I had to create two Application Account with two different Adobe ID and emails.
Is this the cause?
I appreciate every help that could solve my problem but just to let you know, I work on DPS since it start and this is about the fifteenth apps that I did in the last 5 years, so I know exactly how it works.
Have you tried to reproduce my list of thing?
It works for you?
Yes?
No?
I have a problem, i can't generate with DPS App Builder "App distribuzione.zip" to be sent to Apple to publish APP, this is the error message: is not a valid distribution certificate Apple. What do I do?
Same problem, same answers, same unsolved problem.
I made new certificates (it was the first thing I did) and It doesn't work.
Thanks.
Andrea

How to connect Oracle Form Builder - Oracle Developer Suite 10g - Windows 7

Hi brothers and sisters,
Hope all you are fine. I have installed Oracle Developer Suite 10g on Windows 7 successfully and it is working properly. But when I connect to Oracle Form Builder using Connect window asking:
a. User Name
b. Password
c. Database
a message box appear: 'ORA-12154: TNS:could not resolve the connect identifier specified'
I verify my Connect String with: 'SELECT * FROM v$database', but the problem remain the same.
Please help me how can I connect to Oracle Form Builder.
Noor

hi
plz use Net Configuration Assistant or set tnsnames.ora with connect string and computer name.
Net Configuration Assistant.
when its opened then go to .
*Local Net Service Name Configuration.
*Click Next.
*Add.
*Click Next.
* Service Name--Type here connect String which is XE or any Connect String.
*TCP.
*Click Next.
*Host Name--Enter here Computer name or Ip address.
*Yes,Perform a test.
you can enter correct password and username here.
Note:- your Database should be Up if its not Up it will through the same error so plz startup your database first.
sarah

Help on how to read the content of an XML file from the payload

I have a receiver channel / mail adapter, that sends e-mails with a XML attachment.
Im trying to write a Bean, that should make it possible to rename the attached XML file dynamically.
In the Bean I want to read the content of the attached XML file, it could be the order number.
The filename should then be Order number.XML.
<u><i>Can anyone help me with how to read the content of the XML file from the payload.</i></u>
<i><b>Frank</b></i>

hi,
check this: http://jakarta.apache.org/poi/

Unable to display the Content of a data file from within another data file in Oracle webcenter portal.

We have a Content Presenter taskflow. This task flow is added to a jspx page. The taskflow fetches the content from the contributor data file. The contributor data file is having a WYSIWYG editor. The content of the WYSIWYG editor is being displayed correctly through the task flow.
We have some links in the WYSIWYG editor. These links again point to some data files. When we click on these links from within the portal, then we are getting a blank page(the url of this blank page is: http://localhost:7101/eWSIBPortal/faces/oracle/webcenter/sitestructure/render.jspx?datasource=UCM%23dDocName%3AWSIB_ARTICLE) and not displaying the content of the data file that we are pointing to from the WYSIWYG editor.
We want to display the content of these data files(which we have pointed from WYSIWYG editor) in-line within the portal.
Please help us to resolve this issue and let us know if any information is required from our end.

Thanks for reply. However, can I use XSQL to dump the formated text to a file? or just can display to client through web browsers?

I have an iPod whose contents I want to transfer to a newer Ipod. At some stage I lost the music files from my library. Is there any way to get them back from the older iPod and put them onto the newer one again? I stupidly synced the wrong one.

I have an iPod whose contents I want to transfer to a newer Ipod. At some stage when I thought I was syncing correctly I wasn't so I lost the music files from my library. Is there any way to get them back from the older iPod and put them onto the newer one again?

Have you not got a backup of your content on, for example, external drives ? If not then you could have a look to see if any of the utilities mentioned in this old post still exist and work : https://discussions.apple.com/message/11014893?messageID=11014893#11014893

Unable to run the form from Form Builder 10g

HI,
I am having a problem with running a form with form builder 10g.
I have create a form with some text boxes to display values in a table.
When i compile and run the form it does not run The error shown is
HTTP 403(Forbidden) You are not authorised to view this page.
The Link used for the above is:
http://127.0.0.1:1740/sWuCqhMKUT1btA1N5cXLCRshkJzmgKRIlCEUFd9RL520LVq0
The port number 1740 changes everytime. I dont know why.
I have started the OC4J instance before starting the Form Builder.
I have made the changes to the runtime preferences in the form builder.
http://localhost:8889/forms/frmservlet
But it doesn't work when i try to run the form from Form Builder.
ie Program-->Run Form
The form works properly when using the 'Run a form on the Web Utility' provided with Developer Suite.
Can anyone please suggest a solution. I have searched the forum but didnot find a solution.
Thanks
V.S.

One of our DBAs has installed the software.
It was a default installation, I believe, as no configuration was done during the installation except for increasing the virtual memory size.
Post installation we changed the tnsnames.ora file and the sqlnet.ora file.
Do i need to configure something ?
Thanks,
V.S.

How do i make it so iTunes plays the music files from where i have chosen to store them?

how do i make it so iTunes plays the music files from where i have chosen to store them as opposed to it scattering copies of my files into a myriad different folders based on the albums they came from when i'm not even interested in keeping whole albums?
I recently converted myself to mac after having been a windows formatted person since the beginning of time. I use last.fm and the client scrobbler only supports iTunes on the mac (scobbling since Nov 06 and i'm now heavily dependant upon it as a means of discovering new music) - if you don't know what that means then take it for granted i have no option other than to use iTunes as my media player whn using the mac. And almost immediately upon using iTunes i was filled with horror.
My tale of woe as follows: I copy all my mp3 files to folder X on my new mac. I copy my simple playlist in to that same folder X. The simple playlist simply lists all the files in folder X in the order i want to hear them in... simple right? And what happens the moment i start playing my simple list? Well you probably all ready know; itunes throws copies of all those files in to the air, scatters them to the four winds so each of them fall into a little folder of their own representing the album they might once have come from. I don't keep whole albums. For me the 'album experience' is a ruse to trick one into listening to weaker material. I only keep the concentrated goodness. I only put up with albums in a previous lifetime because in the days of vinyl i had no other choice apart from spending hours compiling mix tapes. Now i am liberated from these restrictions and have been for the 15 or so years i've been using a computer to listen to music. Until along comes iTunes forcing me backwards in time, frog marching me back into the past.
That simple list i mentioned is my one and only playlist. This single playlist has been evolving for 15 years as tracks are added and removed and their position in the list changes because that song sounds amazing when heard after that other song whereas hearing this song after that song would be like pouring custard over your sausages (for me shuffling is an abomination). And so here is how i've managed this list and managed synchronization of said list and listed files with my mp3 player (currently a Zen).
Adding a new file: After deciding that song is a keeper i will copy it into that simple folder that holds all my music and drop it in to a position on the list i deem most suited for it. Incidentally over this entire 15 year (i'm pretty sure it's been around that long) my media player has been winamp but for the reason previously mentioned i am unable to use winamp in mac world.
Removing a file: fortunately winamp has an option to simultaneously remove a file from the list and the hard drive. And naturally so because after all if i no longer like a song then i want it expunged completely from life or at least from my hard drive and playlist. In the brave new world of iTunes i have to remove from the list there then delete the file from where iTunes copied it from and then the place iTunes copied it to.
Editing the list: drag an item in the list to it's preferred location and select to save it as i would for any other file using any other application... well desktop type application as opposed to one that uses a database as its primary means of storage.
Syncing with the mp3 player: copy drag drop playlist file from the simple folder on the hard drive to the simple folder on the mp3 player as i would for any other file. And then also copy drag drop the most recently created files from simple folder on hard drive to simple folder on player after having ordered them by creation date so as to make it easier to select the most recently created. After a while the mp3 player will fill up with the files no longer on the list so i will delete all files from player then re-copy all flies from simple folder on hard drive to simple folder on mp3 player.
I do not make changes to the list on the mp3 player so synchronization needs only to go one way: from laptop to player.
So all very simple. Apart from editing the positions of files in the list everything is managed by copy drag dropping and deleting files using windows explorer.
But i'm in a mac and circumstances have forced me in to the corner of using iTunes. And this whole iTunes situation is terrifying for me as over the years i've heard horror stories about it deleting all of someone's music files. Perhaps this may have been by using the software incorrectly but even so, the very fact that it appears possible for this to happen simply by using the software incorrectly and the fact that it happens with some degree of frequency given the number of reports of this happening that i have heard of over the years on music discussion forums fills me with dread that i have to now use this software. And given the software's blatant disregard for the user's choice as to where to store his/her files it's no surprise that this happens. The software is pointlessly doing dangerous things with my data. Please make it stop.
Please can i just at the very least make iTunes play the music from the folder i have chosen to put my files in and not copy those files here there and everywhere without my say so? Thankyou.

option discovered in preferences. Really this and any feature that moves deletes or edits a users data should as far as possible be OFF BY DEFAULT. It shouldn't by default and without the users specific say do this dangerous and unnecessary thing without even letting the user know what it's doing!!! And then cause me a few hours (as i'm new to mac) searching for the option so as to switch it off. If i hadn't noticed the status cage declaring that it was copying files then i might never have twigged that this insane thing was occurring. And if i hadn't of noticed i would have been left maintaining the contents of the folder i copied the files to, the folder which as far as i was informed and so believed was also the location of the music files i was playing. How does Apple justify this 'genius' piece of software non-design? Surely it will hurt no one if this was off by default for new users - overall at least i dare say it would cause a lot less distress in the future for the unsuspecting public at large. Thanks for the support.

How to Write/Read to files from Forms 6.0

I would like to write some data to a file from Developer 2000.
I should also be able to change the Font, color and size of the data written to the file.
Mail Id : [email protected]
Need a reply at the earliest.
Thanking you, in advance
null

Dear Vinayak prabhu,
I cannot make use of the stored procedure (using the util_package) or the Text_io package (from forms). This is because, only normal operations (like put_line,get_line...)are possible using the above procedure calls.
Since I would like to change the "size" and "font" of the text written to the file, i would be requiring a procedure (package) wherein the above properties can be set for each line or para or page ..etc.
Can you suggest me a suitable solution ?
Ramnath Balasubramanian
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by vinayak prabhu ([email protected]):
Hi Ramnath
In forms you can use text_io package to read or write to a ASCII file or else write a stored procedure and use util_file which also does the reading and writing to a ASCII file.This stored procedure can be called from a form.
Vinny.
<HR></BLOCKQUOTE>
null

Browser size when launched from Forms Builder

Hi, Does anyone know how to set the size of the IE browser when launched from Forms Builder? I have set the width and height setting to 100% so that the applet takes up all the browser space, however the browser is still not as large as I'd like.
When I start IE on its own, it opens in the desired size, it's only when running it from Forms Builder that it's too small. I've searched on the net, but nothing seems to work, there must be a setting specific to Forms?
Thanks
Sam

If you are using SeparateFrame = True, then you might try using these in your When-New-Form-Instance trigger:
set_window_property(forms_mdi_window, window_state, maximize);
set_window_property('Your_Main_Window', window_state, maximize);
If you are not using SeparateFrame = True, then you may have to use JavaScript in the page where your applet is located. Javascript can also go in your formsweb.cfg file. See:
HTMLbeforeForm=<script>....</script>
or
HTMLafterForm=<script>....</script>

HT2548 how do i copy the domain file from OS 10.4 to a lion OS computer? I made a copy of the domain file and copied it to my new computer, but it doesn't open in iweb when I double-click on it.

How do I import an iweb domain file from an ibook (OS 10.4) to an imac (OS 10.73)?
I copied the domain file from my ibook to my imac, but when I double-click on the file, it doesn't open in iweb.

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder. Then place the domain file in your Users/Home/Library/Application Support/iWeb folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Unable to load the flat file from client work station

Hi,
I am trying load a flat file (.CSV file)from my desktop (Client work station) and getting the following error.
An upload from the client workstation in the background is not possible
Message no. RSM860
Diagnosis
You cannot load data from the client workstation in the background.
Procedure
Transfer your data to the application server and load it from there.
I have recd a .XLS file and then I have converted to .CSV file , which I saved in my desktop and trying to load the same.
Please help me how to go about this?...
Thanks in advance.
Christy.

Hi All,
Again, I have tried to load the flat file from clint work station with direct loading..I have got the following errors..
Errors : 1
Record 990: Contents '50,000' from Field /BIC/ZPLQTY_B Not Convertible in Type QUAN -> Long Tex
like this i recd so many errors.
ERROR : 2
Error in an arithmetic operation in record 259
Please help me how to load the flat file successfully.
If I hv to save the flat file in Appl server..how to do that..Please provide step by step instruction..
Thanks
Christy

Not moving the .pdf files from Drop Off Library to my custom document library in sharepoint 2013

Hi Team,
I am trying to move the .pdf files from drop-off library to custom library.
For the above requirement i am writing content organizer rule condition like (On Group: Document content types & Type: Document)
Property: Name
Operator: Ends with
value: .pdf
and Setting value in target location like
/sites/MS/ProductGuides
How to solve the issue
If help appriciated
Regards,
Dhaya

Hi Dhaya,
I created a Content Organizer rule like this:
When uploading a .pdf file to the Drop Off library, it is moved to the destination library immediately:
I suggest you create a similar rule as above for another test to see if the issue still persists.
Thanks
Patrick Liang
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to write the JTables Content into the CSV File.

Hi Friends
I managed to write the Database records into the CSV Files. Now i would like to add the JTables contend into the CSV Files.
I just add the Code which Used to write the Database records into the CSV Files.
void exportApi()throws Exception
          try
               PrintWriter writing= new PrintWriter(new FileWriter("Report.csv"));
               System.out.println("Connected");
               stexport=conn.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE);
               rsexport=stexport.executeQuery("Select * from IssuedBook ");
               ResultSetMetaData md = rsexport.getMetaData();
               int columns = md.getColumnCount();
               String fieldNames[]={"No","Name","Author","Date","Id","Issued","Return"};
               //write fields names
               String rec = "";
               for (int i=0; i < fieldNames.length; i++)
                    rec +='\"'+fieldNames[i]+'\"';
                    rec+=",";
               if (rec.endsWith(",")) rec=rec.substring(0, (rec.length()-1));
               writing.println(rec);
               //write values from result set to file
                rsexport.beforeFirst();
               while(rsexport.next())
                    rec = "";
                     for (int i=1; i < (columns+1); i++)
                         try
                                rec +="\""+rsexport.getString(i)+"\",";
                                rec +="\""+rsexport.getInt(i)+"\",";
                         catch(SQLException sqle)
                              // I would add this System.out.println("Exception in retrieval in for loop:\n"+sqle);
                     if (rec.endsWith(",")) rec=rec.substring(0,(rec.length()-1));
                    writing.println(rec);
               writing.close();
     }With this Same code how to Write the JTable content into the CSV Files.
Please tell me how to implement this.
Thank you for your Service
Jofin

Hi Friends
I just modified my code and tried according to your suggestion. But here it does not print the records inside CSV File. But when i use ResultSet it prints the Records inside the CSV. Now i want to Display only the JTable content.
I am posting my code here. Please run this code and find the Report.csv file in your current Directory. and please help me to come out of this Problem.
import javax.swing.*;
import java.util.*;
import java.io.*;
import java.awt.*;
import java.awt.event.*;
import javax.swing.table.*;
public class Exporting extends JDialog implements ActionListener
     private JRadioButton rby,rbn,rbr,rbnore,rbnorest;
     private ButtonGroup bg;
     private JPanel exportpanel;
     private JButton btnExpots;
     FileReader reading=null;
     FileWriter writing=null;
     JTable table;
     JScrollPane scroll;
     public Exporting()throws Exception
          setSize(550,450);
          setTitle("Export Results");
          this.setLocation(100,100);
          String Heading[]={"BOOK ID","NAME","AUTHOR","PRICE"};
          String records[][]={{"B0201","JAVA PROGRAMING","JAMES","1234.00"},
                           {"B0202","SERVLET PROGRAMING","GOSLIN","1425.00"},
                           {"B0203","PHP DEVELOPMENT","SUNITHA","123"},
                           {"B0204","PRIAM","SELVI","1354"},
                           {"B0205","JAVA PROGRAMING","JAMES","1234.00"},
                           {"B0206","SERVLET PROGRAMING","GOSLIN","1425.00"},
                           {"B0207","PHP DEVELOPMENT","SUNITHA","123"},
                           {"B0208","PRIAM","SELVI","1354"}};
          btnExpots= new JButton("Export");
          btnExpots.addActionListener(this);
          btnExpots.setBounds(140,200,60,25);
          table = new JTable();
          scroll=new JScrollPane(table);
          ((DefaultTableModel)table.getModel()).setDataVector(records,Heading);
          System.out.println(table.getModel());
          exportpanel= new JPanel();
          exportpanel.add(btnExpots,BorderLayout.SOUTH);
          exportpanel.add(scroll);
          getContentPane().add(exportpanel);
          setVisible(true);
      public void actionPerformed(ActionEvent ae)
          Object obj=ae.getSource();
          try {
          PrintWriter writing= new PrintWriter(new FileWriter("Report.csv"));
          if(obj==btnExpots)
               for(int row=0;row<table.getRowCount();++row)
                         for(int col=0;col<table.getColumnCount();++col)
                              Object ob=table.getValueAt(row,col);
                              //exportApi(ob);
                              System.out.println(ob);
                              System.out.println("Connected");
                              String fieldNames[]={"BOOK ID","NAME","AUTHOR","PRICE"};
                              String rec = "";
                              for (int i=0; i <fieldNames.length; i++)
                                   rec +='\"'+fieldNames[i]+'\"';
                                   rec+=",";
                              if (rec.endsWith(",")) rec=rec.substring(0, (rec.length()-1));
                              writing.println(rec);
                              //write values from result set to file
                               rec +="\""+ob+"\",";
                               if (rec.endsWith(",")) rec=rec.substring(0,(rec.length()-1));
                               writing.println(rec);
                               writing.close();
     catch(Exception ex)
          ex.printStackTrace();
     public static void main(String arg[]) throws Exception
          Exporting ex= new Exporting();
}Could anyone Please modify my code and help me out.
Thank you for your service
Cheers
Jofin

How to extract the contents of the Jar file?

Hello,
Can anyone tell me how to extract the contents of the Jar file?
An example will be highly appreciated.
Thanks.

From command line, or from within a java application?
Kaj
Btw. Why do you need to do it. You do know that you can add jars to the classpath and read resources from them without extracting the file?

Size & content of the compiled file from Forms Builder (Oracle Developer 6)

Similar Messages

Maybe you are looking for