Sizing Virsa and XI

Hi!
He wanted to know where I can find documentation to perform the sizing to implement VIRSA and XI.
Thanks in advance.
Gustavo Cabero

check URL https://websmp202.sap-ag.de/~form/sapnet?_FRAME=OBJECT&_HIER_KEY=501100035870000015092&_HIER_KEY=601100035870000206624&_HIER_KEY=701100035871000499139&_SCENARIO=01100035870000000202&#HOME
cheers,
-Sunil

Similar Messages

I am trying to print a passport sized headshot and I get a full page photo. How to I print out a smaller size?

I am trying to print a passport sized headshot and I get a full page photo isntead. I downloaded the shot from i photo and chose "small" but it didn't help.
I also cropped the photo on iphoto to the dorrect size but no difference. I have a Canon MX 870 printer. Please advise.

In iPhoto select the photo and print - select the paper size and a custom print size (2x2 i believe for passports) and print
LN

Sizing DB_CACHE_SIZE and SHARED_POOL_SIZE

Hello, is the a good rule to use when sizing DB_CACHE_SIZE and SHARED_POOL_SIZE is terms of a percentage of the total memory you are allocating to Oracle?
For example I have used the following:
I take 70% of the total memory on the machine and allocate it to Oracle.
70% to DB_CACHE_SIZE
30% to SHARED_POOL_SIZE
I am looking for the best way to do this as a starting point. Thank you.
David

Hi,
Database concepts
Database Administrator guide
Oracle Reference
are some of the online books.
You may refer to
http://www.oracle.com/pls/db92/db92.docindex?remark=homepage
Also check the documentation for statspack and try installing statspack on your system and see the reports, to identify the bottelnecks and resolve the problems.
Performance tuning will be a continuous activity till you have a tuned stable system. As other member said, there are no golden rules for the pool sizes.
Regards,
Badri.

APEX database sizing methods and spreadsheets

APEX database sizing methods and spreadsheets

Yes I asking how much space the APEX 3.2 framework requires as well as yes to how much space to allocate for your particular application that happens to be implemented in APEX. I have 1 word form that contains 10 fields that are filled in by users currenlty now. So far, I have 50 of these completed (same form) and would like to create an APEX application supported by a database that can initially contain this data in one table once migrated and be able to hold more of this data as the new online system is used. Therefore, are any sizing methods, for example, function points or excel macros, etc...that can be used to predict potential database sizes needed based on an increase in data volume.
I ask this because currently APEX 3.2 uses Oracle Database Express Edition (XE). Oracle Database XE can address only 1GB of RAM. This limitation mainly affects how many users can access the database concurrently and how well it perform but APEX can run against a full 10g or 11g install of Database as well as XE, and you can upgrade rather nicely from XE to full DB if your needs demand

If I'm copying text and/or vector elements from Indesign to Photoshop how come their pixel sizes change even though I opened the same sized document and my indesign file is a web file?

If I'm copying text and/or vector elements from Indesign to Photoshop how come their pixel sizes change even though I opened the same sized document and my indesign file is a web file?

>my indesign file is a web file
Pardon?
Or do you mean that, when you created a new document, you choose Web as intent maybe?

I downloaded Dreamweaver CC 2014.1, started using it but cannot find Show Fluid Grid Layout Guides button, Resize LI.link sizing handle and 'move up a Row' arrow. Where can I find them?

I downloaded Dreamweaver CC 2014.1, started using it but cannot find Show Fluid Grid Layout Guides button, Resize LI.link sizing handle and 'move up a Row' arrow. Where can I find them?

You have the latest version (CC 2014.1 or 2014.1.1) in which the interface condenses Design View with Live View buttons in normal layouts. See screenshot.
However, in FGLayouts, Live View is the only option which poses some editing problems and has been highly criticized.
Is there any way to display the Design View in fluid grid pages?
New Features in CC 2014.1 October Release
http://helpx.adobe.com/dreamweaver/using/whats-new.html
New Features in CC 2014.1.1 February Release
https://helpx.adobe.com/dreamweaver/using/whats-new.html#Enhancements%20to%20Live%20View%2 0editing
You can disable this restriction by adding an X to the FGLayout CSS.
    Dreamweaver Fluid Grid Properties
    dw-num-cols-mobile:      X 4;
    dw-num-cols-tablet:        8;
    dw-num-cols-desktop:    12;
    dw-gutter-percentage:    25;
=====================================
Having said that, it might just be simpler to revert to an earlier version. Log-in to Creative Cloud Desktop app. Go to Filters & Versions > Previous Version. See screenshot.
Nancy O.

How can I insert an additional page without screwing up the master layouts? I have a document with multiple sized pages and the same master applied to each page.

My document is currently 10 pages. There are 5 different sizes of the pages. They all have the same master page applied to them. When I go to insert a new page and/or duplicate a page...it screws up where the master layout goes. Surely there is simple way to do this??
For example:
These pages are all inserts for a sales folder.
Pages 7 and 8 are sized at 8.5" w X 10.25" h. Pages 9 and 10 are sized at 8.5" w X 11" h.
I need to duplicate page 8 and have it go between 8 and 9 and it needs to be sized like pages 7 and 8 (or 8.5" w X 10.25" h)
When I go to to do this, it screws up the master page layout for the remaining pages of the document.
I have tried several ways to do this. Can anyone help??
Thanks!

Try to define 5 different master pages.

Bacteria sized type and the 23" display

I don't know how many of you have ever read Dave Barry's book 'Dave Barry Turns 50', but if you ever have you'll know that he devotes a chapter to the phenomenon of bacteria sized type which appears to readers after age 50.
That's the one complaint I have with my new Apple 23" Cinema display. Most areas of Safari, Mail and other apps have controls where most of the type can be made larger (and readable)... but NOT ALL!
For instance in Safari, the type on the bookmarks page cannot be increased in size. In Mail, the messages can be made larger, but not the listing of Mailbox type.
What would be ideal would be some kind of universal type enlarging command that applies to everything. I think Windows XP actually works better in this regard.
Are there any additional video drivers that can be downloaded to help with a resolution size that would make reading bacteria sized type easier on the Cinema Display?
Is there any universal command to OSX 10.3.4 that can help make the type larger throughout the whole system?
Thanks for any clues....

Thanks... I'm still running Panther though. And since I'm a professional artist, I really don't need a handicapped voice directing my computer actions... just looking for a way to make type larger and easier to read, since the 23" display reduces so many features to a really tiny size.
For instance the font size increase in Safari works great... but it's a pain to have to click it 3 times for every new web site one visits. Same thing with Mail. The font increase works great, but you have to do it every time you open a new email.
It's even worse in Adobe Creative Suite, where so many of the program fonts and icon buttons are now so very very tiny.
I'd just have thought that there'd be some more choices in the screen resolution from Apple.
Are there any 3rd party programs that allow the Cinema display dimension with more resoution choices?
Thanks for any input....

Sizing OLEFields and Word Document

I am having trouble sizing an Embedded OLEField so that it only takes up the screen real estate that I have available.
I am using the OLEField.LinkTo() method to attach an existing Word document to the OLEField. That document is being displayed, but I have no control over its size.
I have tried setting the Width and Height on the OLEField before and after the LinkTo. I have also tried setting the Width and Height of a Parent GridField, and setting the size policy to Parent, all with no success.
When I call TraceWidget on the OLEField all of my changes appear to be ignored. A TraceWidget on the ParentGridField seems to contain the correctly set Width and Height values, but there is no physical change to the window.
I am looking for one solution that will work in both Forte 2.0.F.4 and Forte 3.0.G.2, and if there isn't a common solution then one for each.
Thanks.

Hi srikant,
You can also display word documents and pdf by uploading it in the server.
For this you'll have to create aliases in the server for the corressponding documents that you want to uploaad.
Go to visual admin ->services->httpprovider.
Then click the tab 'aliases'. Here you can give the name of your alias and also the document to which the alias should point(first upload the document to the server machine and then give the path here ) .
Now when you type http://server:port/aliasname your document will open in the browser. You can display it either through your iFrame or linktourl as you prefer.
Hope my effort will help you.
Regards,
Rahul.

What is the relation between Virsa and GRC?

Gurus:
Because I am between projects so that I dont have the access to the SMP. Would you please
explain it here?
Thanks!!

Hi,
Regarding GRC you can get information from the below site.
http://www.sap.com/about/press/Press.epx?PressID=6247
Actually the GRC Access Control - Risk analysis and remediation v5.2 is formely known as Virsa Compliance Calibrator.The below site gives you a Implementer Quick Reference Guide.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2009bbbf-23aa-2910-70af-882e63d147be
From the above two sites you can have a clear understanding of GRC and Virsa.
Thanks & Regards,
Pradeep Srigiri

Zero sized files and client download errors..

Frequently I see zero sized files being downloaded into the patch proxy spool area.
Sometimes it is the detectors file. Other times it is a whole heap of all_signed<patchid>.jar files. This basically breaks all future downloads of these patches to the clients.
If I go into the spool directory and delete the offending zero length files and re-issue the download command it works.
Also, on especially large patch files, the client will report errors during the download. The patch proxy is still downloading the patch in the background but the client times out waiting for it to come down.
I will paste logs etc when I see it again.

I encountered an issue today with zero length patch jar File
17# cd /var/sadm
doe63 - root - /var/sadm - (-ksh)
18# find . -name "*120068*"
./spool/patchsvr/%2Fall_signed%2F120068-02.jar
doe63 - root - /var/sadm - (-ksh)
19# ls -l ./spool/patchsvr/%2Fall_signed%2F120068-02.jar
-rw-r--r--   1 root     root           0 Feb 22 10:00 ./spool/patchsvr/%2Fall_signed%2F120068-02.jarThese were the entries in the catalina.out on the patchsvr
Feb 22, 2007 10:00:02 AM com.sun.swup.updateserver.net.ConnectionFactory getConnection
INFO: Connecting to https://getupdates1.sun.com/
/usr/lib/cc-ccr/bin/ccr -g cns.assetid
/usr/lib/cc-ccr/bin/ccr -g cns.patchsvr.cachelocation
Feb 22, 2007 10:00:04 AM com.sun.swup.updateserver.security.SignatureValidationUtil validateJarFile
SEVERE: error in opening zip file
java.util.zip.ZipException: error in opening zip file
        at java.util.zip.ZipFile.open(Native Method)
        at java.util.zip.ZipFile.<init>(ZipFile.java:203)
        at java.util.jar.JarFile.<init>(JarFile.java:132)
        at java.util.jar.JarFile.<init>(JarFile.java:84)
        at com.sun.swup.updateserver.security.SignatureValidationUtil.validateJarFile(SignatureValidationUtil.java:265)
        at com.sun.swup.updateserver.handler.CachingProxyValidationHandler.validate(CachingProxyValidationHandler.java:195)
        at com.sun.swup.updateserver.handler.CachingProxyValidationHandler.handleRequest(CachingProxyValidationHandler.java:86)
        at com.sun.swup.updateserver.UpdateServlet.processRequest(UpdateServlet.java:80)
        at com.sun.swup.updateserver.UpdateServlet.doGet(UpdateServlet.java:106)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:247)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:193)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:243)
        at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:190)
        at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
        at org.apache.catalina.valves.CertificatesValve.invoke(CertificatesValve.java:246)
        at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
        at org.apache.catalina.core.StandardContext.invoke(StandardContext.java:2347)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:180)
        at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
        at org.apache.catalina.valves.ErrorDispatcherValve.invoke(ErrorDispatcherValve.java:170)
        at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:170)
        at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
        at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:468)
        at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:564)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:174)
        at org.apache.catalina.core.StandardPipeline.invokeNext(StandardPipeline.java:566)
        at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:472)
        at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:943)
        at org.apache.catalina.connector.http.HttpProcessor.process(HttpProcessor.java:1027)
        at org.apache.catalina.connector.http.HttpProcessor.run(HttpProcessor.java:1125)
        at java.lang.Thread.run(Thread.java:595)
Feb 22, 2007 10:02:40 AM com.sun.swup.updateserver.UpdateServlet processRequestOn the client I got
3# smpatch update -i 120068-02
Failure: ERROR: Problem encountered while downloading a patch. Determine if the file system containing the patch download directory is full; the file system is corrupted; or the directory permissions were changed during download.
Installing patches from /var/sadm/spool...
WARNING: The installer cannot find the patch.
/var/sadm/spool/patchpro_dnld_2007.02.22@10:04:17:MET.txt has been moved to /var/sadm/spool/patchproSequester/patchpro_dnld_2007.02.22@10:04:17:MET.txtAfter deleting the jar file of the patch mentioned above it worked.

Creating dynamic sized arrays and filling them automatically on speedy 33

hi all,
I am trying to create dynamic sized arrays on Speedy-33. Specifically, depending on the user input, I want to be able to create
arrays with 128 or 256 elements and fill them automatically. However,
array constant element is fixed for Speedy 33; thus I have to manually set the
size of the array with the mouse and enter the values in to the array by
myself. I want to make this tedious process automatic. Would this be possible? thanks so much for comments!
~casiopea

Casiopea,
There is a really great article on using arrays with LabVIEW DSC which can be found here:
How Can I Be Successful With Arrays In the LabVIEW DSP Module?
One of the biggest things that should be noted about DSP is that there is no dynamic memory allocation. Your array size must be fixed, and thus, your array needs to be initialized by using a constant.
An easy way to initialize an array constant that has many elements that are all the same is to simply create a numeric constant that has the value that you want. Then, create a new blank array constant and drag the numeric into it. In the index input for the array constant, type in the index of the last element that you want to be initialized. Then type in the value in the element that is displayed and all of the elements before it will be initialized to the default value of the numeric constant that you dropped into the array constant. I hope this helps. I would really recommend reading through that article, as it has a lot of great information about using arrays with DSC.
Brian Coalson
Software Engineer
National Instruments

With Half-Sized Frame and SP/LP error, am I getting lower quality?

Seven years ago, I recorded some videos with my Canon ZR miniDV camcorder. I want to preserve the quality of these videos by archiving them on my Mac. The read head on this camcorder is broken. So, I'm borrowing my brother's Sony Digital Handycam DCR-PC110 NTSC to play these miniDV video tapes.
When I use iMovie 6 to import, I get this message:
"The camera is sending half-sized frames, which iMovie can’t accept. Check your camera’s record mode (this is the setting that affects recording quality, which determines the total recording time on a tape). The mode must be set to “SP” or “LP.” If that doesn't help, try removing all the cables and batteries from the camera, wait a minute, replace them, and then reset the date, time, and record mode."
The recording mode is already set to "SP". However, I still cannot import. Every time I try to play the video, it shows a fraction of a second of the video and then it stops. If I disconnect the camera from the Mac, I can play the video without a problem. It seems that iMovie 6 will not allow me to play this video.
Does anybody know what the problem is?
With my brother's miniDV tapes, I don't get this problem on his Sony Digital Handycam.
From some research, I read that it might have something to do with playing a PAL recording instead of NTSC. However, my cameras are NTSC. I've never (consciously or remember to) use PAL. iMovie 6 is set to 29.97 bps frame rate, which is supposedly NTSC.
I tried the suggestion from this posting:
https://discussions.apple.com/message/1808010#1808010
Which is:
- I disconnected the camera from the Mac.
- Started up iMovie 6.
- Started playing my miniDV tape.
- Connected the firewire from the camera to the Mac
Now, I can play and import the miniDV video on iMovie 6. However, I'm curious as to whether iMovie is inputting NTSC and saving into PAL, or vice versa. Therefore, I'm concerned about the possibility of losing quality. Would anybody know if I will be losing quality?

"..the last 43 minutes of clips, cannot play well on my Canon camcorder.."
Run through the tapes to see how many total minutes of material you have on these tapes. A miniDV tape records a maximum of 63 mins at Standard Play rate, and up to about 90 mins at LP (Long Play) rate.
If you have more than 63 mins of material on these tapes, then the recording was made at LP rate.
At LP rate, the tape moves at 2/3 the speed of SP, which means that the video tracks recorded on the tape are very narrow. This means that when those tapes are played in a different camcorder the heads may read the tape properly, because there's no margin for error on these very narrow tracks. When replaying an LP tape, the camcorder's heads may not properly align with the recorded track, giving the 'half frame' error you mentioned.
No camera manufacturer guarantees that any LP material will play correctly on any camcorder other than the one on which it was recorded (because of these narrow LP tracks). [Sony created the professional 'DVCAM' speed - one-and-a-half-times normal SP speed, so two-thirds the recording time - to provide -w-i-d-e-r- tracks than normal, and thus ensure that professional DV recordings can be played back and edited on equipment other than the camcorder which was used
for shooting the material.]
The only solution for LP tapes is to try importing from as many different camcorders as possible till you find one which will do the job. (I had to do exactly the same thing last week, and found that various other Sony 'consumer-grade' camcorders - the material was recorded on a Sony - couldn't 'lock onto' the LP track, but professional or 'prosumer' (more expensive) Canon (XLH1) and Sony (FX1) camcorders could play the old LP material.)
Before trying to play old tapes, whether SP or LP, always wind them fast-forward all the way to the end, then rewind them - at least once - to make sure that the tape layers don't stick together, and to ease the stresses in the tape. You should also do this once a year to every recorded tape, to avoid stresses, pinching, and 'print-through' (seepage of magnetism from one layer of tape to others).
P.S: Have you tried cleaning the 'broken' head on your old Canon? Dip a cotton bud in methylated spirits - or, better still, carbon tetrachloride 'dry cleaning' fluid - and slowly turn the head drum, and wipe up and down it, over and over again ..making sure NOT to catch cotton wool in the sharp narrow gap between each of the (two) heads, which are each halfway round the head (at 180 degrees to each other). Wipe carefully, then examine the cotton bud and see if there are any brown stains on it ..if so, you've cleaned old muck off the head. Repeat with a new cotton bud until there are no more stains on it. Leave the head drum to dry for 10 minutes, playing gentle (half) heat from a hair-dryer on it, but don't melt the plastic camcorder - so that the fluid evaporates and doesn't stick any tape to the head! - then try importing again.
P.P.S: "..It seems that iMovie 6 will not allow me to play this video.." iMovie's tolerance for damaged digital video frames is far tighter than any camcorder's: a camcorder will often replace 'damaged' frames with detail from the undamaged frame before, so doesn't give a clear idea of how damaged the video data may be. If it won't import, it's damaged, possibly through head misalignment, or through a weak or dissipated signal. (Earlier versions, such as iMovie 2.1.2, were more tolerant of 'dodgy' video, and could import material which later versions, e.g; iMHD6, won't allow accept.)

Page sizing error and sidebar not looking correct

How to make my spry bar menu to look correct and the sizing look correct?
How do I make the spry bar menu add on items show up only when scrolled over?
to view page vist: http://www.twinsburgtravel.com/testhome.asp
http://www.twinsburgtravel.com/testresort.html
spacing
page sizing
side bar sizing
spry directory look different and not just a list
changing colors
http://www.twinsburgtravel.com/testrooms.html
Check out the font sizing???
HELP! CS4
Thank you in advance!!

Try snapping the colors on the page in the browser with the magnifying glass and check that all the color numbers are the same...
See this page for how to add hex color picker ...
http://www.iwebformusicians.com/iWeb/Fonts-Colors.html

On my favorite website, free form text boxes are sized strangely and text doesn't fit the allocated space well.

I don't have this problem with other computers running Firefox - only this one. It is my work computer. I also have problems with Javascript sometimes locking up and having to be paused.

Hi,
You can open a ticket with Microsoft from the following link:
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Sizing Virsa and XI

Similar Messages

Maybe you are looking for