SJAS not respond when Change port for Derby db

Hi Folks
when I change port from 1527 [because it is used by another protocol] for derby database to 3333 [using derby.drda.portNumber=3333 in /root/.netbeans-derby/derby.property file] I found that SUN APPLICATION server is not responding properly.
NOT responding properly means:
1. I can start it from command line but can't start from Netbeans(exceptions of derby etc)
2. I can not see any page o/p in browser for admin and webserver8080 but ports are used by SUNApplication server (confirm by port scanning)
anyone faced same problem please tell us possible reasons

Hi,
I did the same thing as you have done - changed the port number to 3333, without making any changes manually to the port values for derby in netbeans. After this i started the appserver from netbeans and i was not only able to start derby (in port 3333) but also the application server successfully. I did not get any exceptions whatsoever.
Just curious, which version of app server are you using? Also, did you verify the settings for the application server that you are starting (using netbeans) under Tools->ServerManager ?
I tried this with 9.1UR1 b01. To add to this, i was able to access the admin console and also the 8080 port.
Edited by: mchondria on Oct 9, 2007 5:22 PM
Edited by: mchondria on Oct 9, 2007 5:23 PM

Similar Messages

  • Heavy lag and "not responding" when using Preview for PDFs

    Hi there,
    I have a problem with my MacBook Pro (9,1 15" Late 2012) running Mavericks 10.9.1.
    Sometimes (quite often in the last weeks) Mavericks getting furious when I try to preview PDFs. This happens:
    - I get an PDF. It came from my eXactScan add, from an email adress or I downloaded it - the source doesn't matter.
    - I open the finder and want to preview the PDF with the built in preview and I get the spinning circle / load indicator. The circle runns for a long time.
    - I can use Mavericks without any problems but the Finder only shows a small thumbnail of the file I wanted to preview.
    - Now it's getting dirty: when I double click the PDF to view it with the Preview app the whole system "crashes":
    the Preview app won't open (but it is shown in the dock),
    my open Mail and Chrome wont react any more or start to lagg very heavy,
    the Finder laggs very heavy
    but the OS (menubar, dock, etc) responds without any problems.
    If I open the "Close Apps" window the apps mentioned above are marked with "not responding".
    I waited for some time but nothing gets better.
    The only way to get rid of the problem is to restart the Mac which works without any problems.
    That's it.

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Access 2010 on 64 Bit Windows 7 Access "Not Responding" when changing from forms view to design view and back

    I am running
    Windows 7 64 bit
    Access 2010 32 bit
    Developing an application with a split FE BE with both files local but continue to have the message "Not Responding" when switching from forms view to design view and back as well as if I try to connect to a subform or object on the sub form.

    I have seen this behavior when the form's RecordSource is a complex query such as a crosstab or a query with several nested queries. To test if this is your case, remove the RecordSource and see if the form starts acting normal again.
    Then again, if the form has several subforms they might be slowing up the loading time.
    Bill Mosca
    www.thatlldoit.com
    http://tech.groups.yahoo.com/group/MS_Access_Professionals

  • After change port for TCPIP PORT for default SQL Server instance (MSSQLSERVER), sql service and sql agent service did not started again

    Hi 
    -when i install default instance MSSQLSERVER i added a domain account as a service account,
    - when i change port for TCPIP PORT , and after sql service and sql agent service did not started again.
    it thrown error 
    The SQL Server (MSSQLSERVER) service failed to start due to the following error: 
    The service did not start due to a logon failure.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
        <EventID Qualifiers="49152">7000</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
    but when i add domain\sqservice account in administrators group these services started,
    1) here  why this change behavior  happened
    2i changed the port 1500
    adil

    HI
    the sql instance service is running with domain/sqlservice account , 
    - i stopped the sql service service
    - when i start it not started again and i found below error message
    Domain and account: MOJPORTAL\spsqlservice
    This service account does not have the required user right "Log on as a service."
    User Action
    Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this.
     If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
    If you have already assigned this user right to the service account, and the user right appears to be removed, 
    check with your domain administrator to find out if a Group Policy object associated with this node might be removing the right.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
        <EventID Qualifiers="49152">7041</EventID>
        <Version>0</Version>
        <Level>2</Level>
        <Task>0</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8080000000000000</Keywords>
        <TimeCreated SystemTime="2015-04-24T17:12:58.326973300Z" />
        <EventRecordID>2177</EventRecordID>
        <Correlation />
        <Execution ProcessID="520" ThreadID="4044" />
        <Channel>System</Channel>
        <Computer>PORTALSQL1.mojportal.com</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="param1">MSSQL$xSQL</Data>
        <Data Name="param2">xxxL\spsqlservice</Data>
      </EventData>
    </Event>
    adil

  • Adobe Elements 9 not responding when saving changes

    Adobe Elements 9 says not responding when I save image changes. I does eventually save the image changes but takes awhile. Is this normal? My computer is rinning Windows 7 and I have 8GB of ram so I don't think that ram memory is the problem. Thanks

    In other versions of photoshop elements, you don't get the not responding
    thing at the top of the screen when saving png files, but it still takes a noticeable
    amount of time to save png's in other versions of photoshop elements and the full
    photoshop version.
    I haven't been able to find it yet, but there is a post somewhere in the photoshop forums
    where an adobe photoshop engineer explained why png's take longer to save than most
    other file formats, but ssprengel said something about the compression of png's which
    sounds like the gist of the post.
    There have been more than a few complaints about the not responding messages in pse 9
    on windows machines for various operations, but as far as saving images, the not responding
    message doesn't seem to hinder saving files, but it is very annoying.
    You might try posting here where several adobe employees answer questions:
    http://feedback.photoshop.com/photoshop_family/topics
    MTSTUNER

  • Windows 10 - Skype not respond when I change language with Grave accent

    Windows 10 - Skype not respond when I change language with Grave accent 

    Switching languages quickly in Windows 10 with the current version of Skype is a known issue.  Hopefully a future update will address the problem.

  • HT4097 my ipad not responding when i connected to pc

    my ipad2 not responding when i connected to pc, like no device connection to cpu

    Do you mean evil your device is not recognised in iTunes for Windows? If so,
    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/

  • After effects cs 5.5 not responding when I open up a project file

    I was recently working on an intro for a youtube channel and my project had been running smoothly the night before.  But now all of a sudden I open it up today and it starts not responding when I try and open the file.  It is running on a mac with 8 GB of memory and a 2.1 GHz intel i7 processor, I have no idea what's happening and I really need help.  Thank you for your time.

    I can understand that my info was vague, but I am as well a novice in after effects.  I have a good bit of experience with it, but not a professional standard.  I have 1 video file of average length, a photoshop file, and a word layer, no other effects really.  My comp size is 1280 by 720, and I don't know what other info I could give.  My other projects run fine, it seems to just be this one now that you mention it.  Should I try starting a new project and just working off of that?  I can understand that you need to know a lot more, but I was also just asking a general question because I felt that it might be common issue of a setting that I may have had to change, so I'm sorry my info was so vague, but that was my reasoning.  I don't believe that saving and backups are my problem, but if you believe it's a means to the solution then by all means please justify that.  Thank your for your time and help.
    Trey

  • Lots of programs does not respond, when opened

    Lots of programs does not respond, when they are opened, Apple store, Mail, Photo Booth and VideoConverterPro and some moor.
    To close, I have to click on finder first. What to do ?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • System Preferences not responding when opening desktop

    After installing Lion 10.7, I find that whenever I try to change the desktop wallpaper in system preferences, it freezes and I have to force quit it.
    I tried to find the systempreferences.plist, as seen from google searches, but I can't find it anywhere, and those seem to be solutions for SL, L or Tiger.
    Help appreciated.
    Thanks!

    I've been having the same issue with system preferences in osx lion freezing and not doing anything for the past week.  Your post solved the problem; all I had to do was move the iphoto library and the photo booth library to the desktop, then I moved them back to my pictures folder in the finder window.  Now system preferences works like a charm, even if I restart the system the system preferences utilities are all accessible.
    This solved the problem; whereas other posts that had me use disk utility to repair the hard drive or repair the disk permissions didn't solve the issue.
    This now saves me a call to apple tech support
    Thank you.
    >>>
    Re: System Preferences not responding when opening desktop 
    Jul 23, 2011 1:27 PM (in response to alexhung)
    It has to do with a problem accessing the images on the home>images folder. To solve it, just move its content (iphoto library included) to another place. Then, restart System Preferences. Moving your iPhoto library to another location seems to fix the problem. I am sure Apple will issue an update to correct this problem. But, for now this seems to work for me.

  • Itunes keeps not responding when i try to log out of my account

    itunes keeps not responding when i try to log out of my account
    I have tried uninstalling the itunes program and re Installing it but it has not worked,
    Is there anyone that can help me?

    Have you tried leaving it to hang for 5 minutes?

  • My ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer

    my ipod touch is not responding when i plugged it  in even with a different cord and restarting my computer and i am using my moms itunes that she has had for a long time and so i cant uninstall itunes.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Itunes application not responding when I plug in my iphone

    I am on itunes 8.2 and when I plug in my iphone itunes just goes into application not responding.
    I wait for a while and then unplug the phone and it goes back to working again.
    On the phone there is no "Sync" message. In fact with the phone plugged in I can access the phones apps just as if it was not plugged in.
    But initially when I plug it in, it does the double vibrate and shows the charging graphic so I know the cable is ok.
    The phone is already on 3.1 apparently because some new features are there... like selecting multiple photos to email.
    But I don't recall ever running any updates in itunes to make it use the new software as I read you were supposed to do.
    I don't want to upgrade to itunes 9 because I read so many people having problems with it... but I wonder if the phone is no longer compatible with itunes 8.2
    Any help is appreciated.
    Thanks.
    -Jeff

    Do you know if the problems people have reported with itunes 9 was before the 9.1 release?
    I've heard tons of people saying they were reverting back to itunes 8.2 because 9 was so bad.
    Am a bit nervous about that update because of that.
    But an applecare guy told me that the 9.1 was supposed to address those issues. I have just not heard anything about that actually fixing things though. Still seems like a lot of people are dreading the new itunes 9.
    If you are an itunes 9 user, did you have any problems with it wiping out your library or any terribly long syncing times?
    Thanks.

  • Lion Clients 10.7.4 show network accounts are unavailable and server is not responding when binding to Snow Leopard server 10.6.8

    Hello,
    I am running Snow Leopard Server 10.6.8 and my clients are Lion 10.7.4.  While testing I had no issues binding 10.7.4 to our 10.6.8 server's OD.  I created a 10.7.4 image to push to all of our machines and in the beginning of last week I was able to push the image and get the machines to bind with OD and apply preferences on these machines through workgroup manager.  Towards the end of the week though this stopped working.  Now any time I bind a 10.7.4 client to OD it allows me to perform an authenticated bind and the machine shows up in workgroup manager but immediatley after binding the client the status jelly next to the OD server in the directory list is red and says "This server is not responding".  If I reboot the client I get a notification that "Network accounts are unavailable" at the login screen.  My preferences from workgroup manager are also not applying, which is my main concern because without workgroup manager my mac server is somewhat pointless as we use it for very little else. 
    I've since tried to bind a snow leopard machine (10.6.8) and this still is working with a green status jelly.  I've also built a lion machine from scratch, updated to the 10.7.4 combined update and am still getting the same issue where it shows the server is not responding when binding to OD.  I then applied the subsiquent OS update after the 10.7.4 combined update but the problem still persists.
    Is anyone else having this issue?  Any help would help me keep my sanity.
    Thanks,
    Dane

    Have you had any luck finding a solution to this?  The only thing I have found was to unbind and then bind without authentication.  Any help with progress on your end would be appreciated!
    Nick.

  • Photoshop CS6 is not responding when leaving PS and coming back again

    A weired problem: My new installation of Photoshop CS6 (OS X Mavericks on a new MBP) is not responding when leaving PS and coming back again.
    Example: i open a new file in PS - then i click on the desktop - when i go back to PS again, it is not responding to any click on any window (except for the menu bar).
    I can solve the problem when i try going back several times or when i go back to PS via the icon in the dock.
    But it is still very annoying in a quick workflow.
    I would appreciate any idea what i can check more, cause i tried everything and i can’t find this issue on the web…
    Thanks…

    Problem solved… The troublemaker was the Trackball Works Driver for Kensington trackballs / Expert Mouses…
    I’m now using a generic driver for USB devices and everything is fine.

Maybe you are looking for