SJIS and Shift_JIS conversion difference

I thought SJIS is just a subset of Shift_JIS w/o
Microsoft extended characters.
But after experimenting it, I realized JDK 1.4
treate them differently. For example, the
InputStreamReader constructed for "Shift_JIS"
reads in the byte sequence 0x81 0x60 as
U+FF3C (Full-width reverse solidus)
while InputStreamReader constructed for "SJIS"
reads in the same byte sequence as
U+301C (Wave Dash)
As far as I can tell there are at least 6 such
Shift JIS characters that are treated differently.
Is this kind of behavior difference documented
anywhere?
-kuro

This may help: http://java.sun.com/j2se/1.4.1/changes.html#Shift-JIS

Similar Messages

  • Extract Conversion Difference and Exchange Rate Difference Journal Only

    Hi Experts,
    How can we extract all Conversion Difference and Exchange Rate Difference Only?
    Is there any parameter that we can use to extract this data?
    Please advice
    Regards,
    Amy

    Hi,
    First, you should define transaction code in Administration >>> setup >>> financials >>> transaction codes.
    Example: DIE : Different Exchange Rate
    Every time you execute Exchange Rate Difference and Conversion Difference, remember to assign DIE code to "Code" field. Then you can extract DIE journal entry easily by choosing DIE code when use expanded function in any accounting reports.
    Hope this helps,
    TVSon

  • XI File Adapter Custom File Encoding for  issues between SJIS and CP932

    Dear SAP Forum,
    Has anybody found a solution for the difference between the JVM (IANA) SJIS and MS SJIS implementation ?
    When users enter characters in SAPGUI, the MS SJIS implementation is used, but when the XI file adapter writes SJIS, the JVM SJIS implementation is used, which causes issues for 7 characters:
    1. FULLWIDTH TILDE/EFBD9E                 8160     ～     〜     
    2. PARALLEL TO/E288A5                          8161     ∥     ‖     
    3. FULLWIDTH HYPHEN-MINUS/EFBC8D     817C     －     −     
    4. FULLWIDTH CENT SIGN/EFBFA0             8191     ￠     \u00A2     
    5. FULLWIDTH POUND SIGN/EFBFA1            8192     ￡     \u00A3     
    6. FULLWIDTH NOT SIGN/EFBFA2              81CA     ￢     \u00AC     
    7. REVERSE SOLIDUS                             815F     ＼     \u005C
    The following line of code can solve the problem (either in an individual mapping or in a module)
    String sOUT = myString.replace(\u0027～\u0027,\u0027〜\u0027).replace(\u0027∥\u0027,\u0027‖\u0027).replace(\u0027－\u0027,\u0027−\u0027).replace(\u0027￠\u0027,\u0027\u00A2\u0027).replace(\u0027￡\u0027,\u0027\u00A3\u0027).replace(\u0027￢\u0027,\u0027\u00AC\u0027);
    But I would prefer to add a custome Character set to the file encoding. Has anybody tried this ?

    Dear SAP Forum,
    Has anybody found a solution for the difference between the JVM (IANA) SJIS and MS SJIS implementation ?
    When users enter characters in SAPGUI, the MS SJIS implementation is used, but when the XI file adapter writes SJIS, the JVM SJIS implementation is used, which causes issues for 7 characters:
    1. FULLWIDTH TILDE/EFBD9E                 8160     ～     〜     
    2. PARALLEL TO/E288A5                          8161     ∥     ‖     
    3. FULLWIDTH HYPHEN-MINUS/EFBC8D     817C     －     −     
    4. FULLWIDTH CENT SIGN/EFBFA0             8191     ￠     \u00A2     
    5. FULLWIDTH POUND SIGN/EFBFA1            8192     ￡     \u00A3     
    6. FULLWIDTH NOT SIGN/EFBFA2              81CA     ￢     \u00AC     
    7. REVERSE SOLIDUS                             815F     ＼     \u005C
    The following line of code can solve the problem (either in an individual mapping or in a module)
    String sOUT = myString.replace(\u0027～\u0027,\u0027〜\u0027).replace(\u0027∥\u0027,\u0027‖\u0027).replace(\u0027－\u0027,\u0027−\u0027).replace(\u0027￠\u0027,\u0027\u00A2\u0027).replace(\u0027￡\u0027,\u0027\u00A3\u0027).replace(\u0027￢\u0027,\u0027\u00AC\u0027);
    But I would prefer to add a custome Character set to the file encoding. Has anybody tried this ?

  • Asset adjustment bcoz of currency conversion differences

    Hi Good morning,
    Have situation in Asset management, while we purchasing assets on month end and some other time, small amounts (3$, or 5$) are capitalizing to the assets account becoz of currency conversions differences rather than gain or loss currency differences account, coming soon we have to avoid this with config changes.
    I'm wondering how to reverse or deduct those small amounts from assets to gain or loss exchange account and what configuration has to be carried to avoid permanent.
    Could any body help on this to over come..
    Thanks in advance and points are available.

    Hi Good morning,
    Have situation in Asset management, while we purchasing assets on month end and some other time, small amounts (3$, or 5$) are capitalizing to the assets account becoz of currency conversions differences rather than gain or loss currency differences account, coming soon we have to avoid this with config changes.
    I'm wondering how to reverse or deduct those small amounts from assets to gain or loss exchange account and what configuration has to be carried to avoid permanent.
    Could any body help on this to over come..
    Thanks in advance and points are available.

  • I bought the HD season version of breaking bad, however I only need the regular @ 19.95. How can I change this and get the difference refunded?

    bought the HD season version of breaking bad, however I only need the regular @ 19.95. How can I change this and get the difference refunded?

    When you purchase an HD video on a supported device or computer, only HD video will be downloaded. To download the SD version, you need to download the video again from your Purchased page. Conversely, if you purchase an HD video on an unsupported device, the SD version will be downloaded. Then, you will need to download the HD version from your Purchased page. Learn more about downloading previous purchases."
    iTunes: Purchasing and viewing HD videos

  • Opening and closing balance difference is showing from 2010 to 2011 F.year

    Dear All,
    Opening and closing balance difference is showing for Main Cash(Cash in h)
    End of fiscal year 2010 closing Balance 85,451,909.70
    Opening Balance 2011 is showing as 85,450,909.70  
    Rs 1000 difference is coming.
    Please suggest if any Note is there?

    Hi,
    Somes after year end for audit / management adjustment entries postings done with previous year.
    Execute N no of times Balance carry forward T.Code: FAGLGVTR  until you get your closing balances & opening balances are the same. it is not harm to execute again & again.
    up to 4.7EE for balance transfer you can use T.Code:F.16 from ECC 5 / 6 use tcode for balance transfer FAGLGVTR
    Regards,
    Viswa
    Edited by: viswanatha s on Nov 4, 2011 12:54 PM

  • Combined Upgrade and Unicode conversion of Sap 4.6C to ECC6.0

    Hello all,
    my project team intends to carry out a combined upgrade and unicode conversion of an SAP ERP 4.6C system with MDMP to ECC6.0 (no enhancement package). The system is running on Oracle 10.2.
    In preparation for this upgrade, I have gone through the SAP notes 928729, 54801.
    We need to get a rough estimate of the entire downtime so as to alert our end users. From the CU&UC documentation in 928729, I read up note 857081. However the program in this note cannot be used to estimate the downtime as my system is < SAP netweaver 6.20.
    Is there any other SAP note or tool or program that I can use to estimate the downtime for the entire CU&UC? Thanks a lot!

    Hi,
    Combined upgrade depend upon number of factors like database size, resources on the server and optimization. In order to get idea of how much downtime, it will take, I would suggest you to do combined upgrade and unicode conversion on sandbox system which should be the replica of your production system. And try to optimize it. From there you can get approx. downtime required.
    Also, please read combined upgrade and unicode conversion guides on  http://service.sap.com/unicode@sap
    Thanks
    Sunny

  • Subnodes and content conversion in FTP-Adapter

    Hello experts,
    the scenaria is IDOC -> XI -> FTP and content conversion is used.
    The structure of the IDOC is like:
    <head></head>
    <pos>
          <subnode></subnode>
    </pos>
    <pos>
           <subnode></subnode>
    </pos>
    There can be 1 ore more positions.
    We mapped this to a XML-structure according to help.sap.com
    http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/frameset.htm
    As we are not allowed to use subnodes all segments have to be on one level.
    How can I map to a structure (with 1 OR MORE positions) like
    <head></head>
    <pos></pos>
    <subnode></subnode>
    <pos></pos>
    <subnode></subnode>
    At the moment we are only able to map to:
    <head></head>
    <pos></pos>
    <pos></pos>
    <subnode></subnode>
    <subnode></subnode>
    In the datatype I can't specify that a position always is followed by a subnode ... i only can use remove context in mapping and put all subnodes beneath the positions. Is there any possibility in graphical mapping to change this?
    Thanks and regards,
    David

    Ok, what can I do, to describe a data typs with variable amount of pos' FOLLOWED by subnodes?
    Or is it possible to create an item line with pos and subnode and remove this line later (move everything to first level).
    <item>
        <pos>
        <subnode>
    </item>
    <item>
        <pos>
        <subnode>
    </item>
    <item>
        <pos>
        <subnode>
    </item>
    MAP TO:
    <pos>
    <subnode>
    <pos>
    <subnode>
    <pos>
    <subnode>
    I can't create a data type like this...
    EDIT:
    Remember, there can be documents with 1 or many positions... and the fieldname always is the same.... the datatype definition doesn't acceppt duplicate fieldnames and fields that are not in a defined sequence.
    Edited by: David Claes on Jul 10, 2008 2:09 PM
    Edited by: David Claes on Jul 10, 2008 2:11 PM

  • 4.7EEx1.10 to ECC6.0 upgrade and Unicode conversion

    Hi Experts,
    We are going to initiate the upgrade from next month onwards. Subsequently i have started preparing the plan and strategy for the same.
    As our current setup is 4.7EEx110/Win 2003 R2-64 bit/Oracle 10.2.0.4.0 (Non unicode). And we have recently migrated on to this setup from WIn2k 32 bit. Also the current hardware is Unicode compatible.
    With respect to strategy for achieving this Upgrade and Unicode conversion, i am planning as follows.
    Step 1) Perform Unicode conversion on the current landscape (Both Export/import on the same servers)
    Step 2) Setup Temporary landscape as part of Dual maintenance strategy and migrate data from the current systems to temporary systems using backup/restore method.
    Step 3) Perform the SAP version upgrade on the current landscape and setup transport routes from temporary to current landscape in order to keep it in sync
    Step 4) after successful upgrade, decommission the temporary landscape
    Please provide your suggestions and valuable advices if there is anything wrong with my strategy and execution plan.
    Regards,
    Dheeraj

    Hi,
    Thanks. As i have already referred these notes as i am seeking advise with respect to my upgrade approach.
    However i have planned to perform in the following manner.
    1) Refresh Sandbox with Prod data and perform Upgrade to ECC6.0 EHP5 & subsequently Unicode conversion on the same server (Since both export & Import has to perform on the same hardware as we have recently migrated on this hardware which is Unicode compatible)
    2) Setup temporary landscape for DEv & QAs and establish transport connection to Production system in order to move urgent changes
    3) Keep a track of the changes which have transported during upgrade phase so that the same can be implemented in the upgraded systems i.e. Dev & QAS
    4) After Sandbox Migration and signoff, we will perform Dev & QAS upgrade & unicode conversion on the same hardware (Note: Since these are running on VMware can we export the data from the upgraded system and import on to a new VM?)
    5) Plan for production cutover and Upgrade the Prod system to ECC6.0 Ehp5 and then Unicode conversion. As i am planning to perform upgrade over the weekend and then Unicode conversion activity in the next weekend (Is it a right way?)
    My Production setup: DB on one Physical host and CI on separate Virtual host
    6) After the stabilization phase, we are planning for OS & DB upgrade as follows:
          a) Windows upgrade from 2003 R2 to Windows 2008 R2
          b) Oracle Upgrade from 10.2 to 11.2
    If anyone thinks that there is anything wrong with my above approach and need changes then please revert.
    I have one more doubt as I am going to upgrade 4.7EEx110 (WAS 620, Basis SP64) to ECC6.0 EHp5.As I presume that I can straight away upgrade from the current version to ECC6.0 Ehp5 without installing EHP. Kindly confirm
    Thanks

  • I recently subscribed to Adobe ExportPDF and tried to convert a PDF file to MS Word.  So far,  after many tries,  I get soe type of error and the conversion fails.  Please advise?

    I recently subscribed to Adobe ExportPDF and tried to convert a PDF file to MS Word.  So far,  after many tries,  I get soe type of error and the conversion fails.  Please advise?

    Hi there,
    It sounds like there may be an issue with the quality of the PDF. Not all PDFs are created equal, and especially those created from scanned documents can be problematic if the scan quality isn't the best. Is there a dark background on the PDF, or stray marks or smudges?
    You can try converting with OCR disabled at outlined in this document: How to disable Optical Character Recognition (O... | Adobe Community. But, while that's a good test to find out where the problem lies, you'll end up with a Word document that isn't editable, so it's not an optimal solution.
    Please let us know how it goes.
    Best,
    Sara

  • If i have an unlocked iphone 5 can i upgrade it to an iphone 5s and pay the difference ?

    if i have an unlocked iphone 5 can i upgrade it to an iphone 5s and pay the difference?

    Then, you own the phone. Your only options are sell the phone yourself or see what programs are offered by third-parties or your carrier.

  • How to Find the highest and lowest cell in a column and figure the difference

    What I am tryng to do is have numbers find the high and low in Cloumn B and and put the difference in B6. So I would need it to Figure out that B3 is the highest and B2 is the lowest and give me the difference of .25 in B6

    Don,
    Begin by making Row 6 a Footer Row. You will find that option in the row tab menu that appears when you hover over the 6 tab and click the triangle.
    Then enter this formula in B6:
    =MAX(B)-MIN(B)
    Regards,
    Jerry

  • Compare two tables and log the difference

    Hi,
    I want to compare two tables and log the difference in new table with the fields as (old value,new value, column name). The column name should be the changes value column

    Can you show an example?
    SELECT Foo.*, Bar.*
       FROM Foo
            FULL OUTER JOIN
            Bar
            ON Foo.c1 = Bar.c1
               AND Foo.c2 = Bar.c2
               AND Foo.cn = Bar.cn
     WHERE Foo.key IS NULL 
        OR Bar.key IS NULL; 
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Combined Upgrade and Unicode conversion question

    Hello Everyone,
    I will be performing combined Upgrade and Unicode conversion soon. Currently i have run Prepare and do not have any errors.
    I have already run SPUMG consistency check and i do not have any errors there. Since this is Combined Upgrade and unicode conversion according to guide i do not need to do the Nametab conversion right now. But now if i go this place:
    SPUMG -> Status -> Additional Information  , i see a status with red for Unicode nametabs are not consistent or not up-to-date.
    Please let me know if i can ignore this step and do the nametab conversion after upgrade is complete and before unicode conversion.
    Thanks,
    FBK

    Please follow the instructions from the guides.
    The Unicode nametabs will be generated automatically during the upgrade.
    An additional check is integrated into the final preparation steps in the target releases.
    Regards,
    Ronald

  • Cost and/or Conversion Rates are missing for some planning resources

    Hi,
    In Workplan of projects, we are facing a issue "Cost and/or Conversion Rates are missing for some planning resources". even though the schedules for the project WP is defined.
    Any inputs on this is highly apprciated. Thanks !!!
    Regards,
    Pallavi

    Did you check the Cost for all the Planned Workplan Budget Lines. Generally, this type of error comes when the Quantity is defined but the Cost is missing for any Line. Find that Planned Workplan Budget Lines and enter the Cost for them and save it.
    I hope it may help you.
    Regards,
    Khan.

Maybe you are looking for