SkillBuilders Modal 2.0 plugin with a page-item button - pass parameters

Hi all.
I have an employee table, which is connected with a 1:N relationship to two tables: Emp_Tech_Fields and Emp_Kids.
I've created a form to update / insert employee data, and I want to add two modal pages: one for kids and one for tech_fields. I think this will be the most usable way for this form.
I've created two page-item buttons on that form, which open the respective modal pages successfully, but I can't dynamically pass them the EMP_ID in order to filter the data in them.
Iv'e uploaded an example to http://apex.oracle.com/pls/apex/f?p=64921:1:6401028834215::::: guest / gu12est3
Document Types is a report with a link-column which opens a modal page with data filtering, as it should.
Employees (click an edit link) has two buttons: Kids, which open the modal form, but does not filter, and Tech Fields, which is filtered hard-coded with EMP_ID = 1 (see in the dynamic action definition).
As far as I understand, this should be something quite easy and day-to-day, so I don't know why I did not find a way to do this. What am I missing?
Any help will be greatly appreciated,
Dovi.

Hi Dovi,
I had a look at your application and can see the link your using for the kids and tech fields modal isn't passing the session ID which is why it is asking you to log in again.
Below is an example URL for your issue, it isn't tested though.
f?p=&APP_ID.:20:&APP_SESSION.:::19:P20_EMP_ID:&P19_EMP_ID.:: You will need to change the page numbers of the pages and items to match the page numbers of yours. This is using the statically defined url inside the plugin itself, I have also only done this in an earlier version of plugin but believe the functionality is very similar.
Hope this helps.
Paul

Similar Messages

Getting error message in debug "Page contains page items/buttons which are not assigned to a region!"

Hi,
I created a form and when I submit, it goes through but there is no "success" or "failure" message on Apex. I tried debugging it and got this message:
"Page contains page items/buttons which are not assigned to a region!"
I looked at the page definition and it seems like everything is assigned to a region. Much appreciate your help.
Thanks!

For your message, the relevant branch needs "include process success message" to be checked - and a value in success/failure in your process.
Check the submitting & landing page for items not in a region. Under the items section there may be items listed separate to those under specific regions.
It's possible these are related, but not guaranteed.

Help with Quiz pages and buttons (please)

We use Captivate 6 with a subscription. I have put together a couple of modules with question pools, and some with just a few questions pages inserted. The last time I created a new captivate project, I put inserted quiz pages and the buttons were different then they had been before. The first few times they were grey, now they are green and a bit smaller. Looking at the proporties for each page and button, I cannot see anything that is different othe than one is a text button and the other is a transparent button. Both buttons are marked as default quiz button style. I don't use any themes. To make this short, I would like to know if there is a way to make the buttons the same every time I add a page, or a pool? I am not yet up to designing my own buttons, but probably will here shortly. Right now I need to get some training modules completed as quickly as possible so I don't have the time to reinvent the wheel (so to speak). The only other thing that I noticed was different in the projects was that in the skin editor one uses one called [default](modifired) and the other one uses one that I created. HOWEVER, I have another one that uses my custome skin and the buttons are grey on that one which is the same as the default one. I don't think the skin has anything to do with the button look. Correct me gently if I am wrong on this.
Thanks for the help.

Just one remark: in CP6 you always use a theme. And quiz slides have their own master slides, that will always be used. The buttons take on the style you see on those master slides, and this style can also be found in the object style manager. Skin and object styles are part of the theme. Probably you have overridden some of the styles defined?
Lilybiri

Trouble with title page and buttons

I can burn a DVD on DVD Studio Pro but am not able to create a title page or buttons. I have DVD Studio Pro version 1. What's the easies way to do this?

Are you seriously using version 1? Wow. I do have a copy of that installed on an old machine somewhere - I'll have to go and find it to remind myself how it all worked.
My recollection is vague, but I seem to recall that you add a menu tile and drop an image of the correct format onto the square on the left hand side to get the background image... you use the property inspector to set that menu as the first play item in the project.
Creating buttons - can't quite remember, but I pretty sure it was/is very easy. I'll look out the old manuals when I get a chance.
It might also be a good time for you to upgrade to a later version. I say this not because I think an upgrade is good, or that V1 was particularly bad (actually, it was spectacularly bad at times), but that there is a very, very small number of people who are able to offer support and advice about v1. It was based on a totally different code set to the current version, and there are very few similarities between that and version 4. The only thing you can say is that the DVD specification didn't change, so certain principles for using the app still apply.
If you can find a copy, look for Martin Sitters excellent book for version 1.5 - a really useful reference. I have a copy of that somewhere too... sounds like it is time to dig it out! Check Amazon here:
http://spedr.com/u19v
Are you running v1, v1.2 or v1.5, and what OS are you using?

Home page set per instructions,opens with blank page,home button opens home page, why?

Set multiple tabs for home page per instructions. set open home page (not blank page). always opens with a blank home page. checked settings many times and have done over from scratch several times. when i click on the home icon the home page tabs are opened. firefox 7.0.1, windows vista, hp desktop

See https://support.mozilla.com/kb/How+to+set+the+home+page

In Invoice Printing back paga T & C over lapping with first page Item text.

HI,
I am using sap script to Print invoice.
I am printing Line item and its Item text one first page and Next page.
secondly I am also printing Terms & condition on every back page.
Problem is.. I am getting 300 Item text line to print in First page and so on..
On first page its printing 10-90 its ok, but its printing 100 only one line one back page
rest i.e. 110 to ..... so on its printing on next page.
In All page its happending, its prining one line of Item text on back page, that it should not be print.
I have tried Protect and endprotect. but its not working, I have tried also using height of page, but prblem remain same.
Kindly suggest.

Hi,
The idea and solution suggested by u is working fine, many thanx.
But one issue is happening after implementing the solution.
A blank page is printing in the last of print out.
We are having FIRST page wich is having next page BACK page and
in BACK page v r having NEXT page as a next page.
So wen v are printing the invoice , its reach to the end and printing the BACK page just back side if the last page.
After that its again creating NEXT page wich is unwanted and coming blank.
Seems its happening just bcoz of v r having NEXT page as a next page in BACK page.
Now everything is coming fine as v expected, except last blank page.
V now require to control this unwanted page.
Kindly suggest.
Waqkas
Moderator message: please do not use SMS speak! (I assume "v" means "we")
Edited by: Thomas Zloch on Oct 26, 2010 10:30 AM

Problem with Next Page(P+) button for VF02 during BDC(Call Trans)

Hi guys,
I have doing a BDC program that manipulates the pricind condition of a billing documents(VF02). Naturally we all know the process involves ticking the checkbox of the line item and press "Pricing" to enter the screen number 620(Pricing Condition page).
My problem is that if I try to call the BDC_OKCODE of 'P+' via call transaction in mode 'N', the process doenst run as planned. However, If I use mode 'A', and simulate the process, the BDC appears to work fine.
My superviosr claims the problem is due to related to the table control of the pricing page. My question is what can be done here?
Thanks guys and good day.

Yep, the position to really helped me in a couple of transactions that would have given me a real problem otherwise.
I have heard about Srinivas suggested before, I never actually had to use it so I didn't want to tell you to do that if I don't know that it works. But now we know.
Good one Srinivas.
Regards,
Rich Heilman

Date Ranges: Page Items or 'Input Parameters'?

Hi,
What is the best way to implement an user input date range qualifier in worksheets?
So far I've only been able to achieve this by using item classes on a date field. Very messy.
Anyone else doing this?

Thanks Gveeden.
How do you setup your date parameters?
Are they 'conditions'? If so, how do you let the Users specify values in User Edition?
Hope you can help out.
Thanks already,
Peter Verhoeven.

Page Item In all !!

I want to know if there are some way to know if discoverer execute the report with the page item in <all>?
My regards.

Hi user604420
Discoverer will execute the report regardless of what's in the Page items. Page items are not the same as a condition, in that, regardless of what you select for Page Items, all values will come back. Page Items only change what you see, not what's queried. A condition is the only way to limit what is selected in the query.
Hope that helps
Nate

Which page items get included in URL on doSubmit()?

This is totally perplexing me.
I have a page with 5 page items in a tabular region. All of them are set to hidden/protected.
The page is loaded with one of those page items specified in the URL.
If I use the button to delete one or more rows on the from, or click on the "Add New Row" button, the page is submitted, and comes back with three of those five page items specified in the URL.
First question: why only 3 and not all 5? Why THESE three? I can't see any differences between one of the page items that does display in the submitted URL vs. one that doesn't.
Second question: I changed one of those page items to display conditionally. If a certain condition is not met, the field is never output to the page. However, EVEN THEN when I submit the page using one of the buttons above, the field is included in the submitted URL! Should that even be happening? That actually strikes me as a security risk, unless there's something I'm doing wrong.
I can probably create a test page on apex.oracle.com if necessary. (It's on apex.oraclecorp.com right now, but moving it will take some time since I'll have to strip out some sensitive data.) But I'm hoping this is just some easy-to-explain concept I'm just not grasping.
Thanks.
- Keith

hi Keith,
1) check the branch. the branch defines what is passed to the next page.
2) yes, this is correct behaviour. condition is for rendering, but the branch is fixed.
brgds,
Peter
Blog: http://www.oracle-and-apex.com
ApexLib: http://apexlib.oracleapex.info
Work: http://www.click-click.at

Exporting from Viewer to Excel not bring across multi Page Items

Quick Question (Hopefully…)
Can a Tabular Worksheet that has page item called Periods (consisting of JUN-06, JUL-06 & AUG-06) be exported to Excel with all the Page items? I've tried using the Microsoft Excel Workbook with PivotTable (*.xls) format, however only the current page item is exported.
We are on Microsoft Excel 2000 SR-1 and Macro’s have been enabled. Disco is also working at 4.1.48.08.
Cheers,
Lance

yippee ... or not. I've finally had a reply from Oracle .... This is their reply:
'xxxxx is not available today, therefore I respond to you instead.
I believe what you request has never been possible in Viewer.
There is an open Enhancement Request for this functionality to be included:
Bug.2206949 (21) ENH ABILITY TO EXPORT PAGE-DETAIL WORKSHEET TO EXCEL WITH ALL PAGE
ITEMS
I have added you to the list of customers requesting this enhancement.'
Now, why couldn't they have just said that before .
MF, i thought this problem only occurred in version 4. I remember reading somewhere that versions above 4 can export to excel on all Page items.. Can't remember for the life of me where i saw or read that.
Lance

Arangement of Page Items and Regions

I created an APEX page (version 4.0.1.00.03) named Request Edit with many page items for data entry of user requests. The form has a region named Request Edit that holds the data entry page items. Within the region is a region for buttons. There were two addition regions on the page below the buttons named Jobs a report region and Audit a Show/Hide region. The users do not like to scroll the page during data entry so I decided to place many page items into three new Hide/Show regions name Requestor, Recipient, and Service. I defined the regions and then moved the page items to one of the three regions Requestor, Recipient, and Service. When the page is displayed the three new regions displayed after the audit region. I wanted the new regions to display after the Request Number and before the Comments page items. I decide to change the Parent Region in the User Interface properties of the page to Request Edit for the new regions. That moved the three regions above the Audit region but after the Comments page item.
What properties of the three new regions Requestor, Recipient, and Service will position the new regions after the Request Number and before the Comments Page items? Is it necessary to define the Parent Region in the User Interface properties of the page to Request Edit for all of the regions?
To describe visually what I am trying to do imagine the following simplified page:
<Create> <Save>
Request ID: [________]
Requestor Name: [_________]
Recipient Name:[ __________]
Service Type: [____________]
Comments: [____________________]
<Create> <Save>
Jobs Report Region
+Audit Region
I defined three regions and moved the page items to them
<Create> <Save>
Request ID: [________]
Comments: [____________________]
<Create> <Save>
+Requestor
+Recipient
+Service
Jobs Report Region
+Audit Region
After I defined the Parent Region in the User Interface properties of the page to Request Edit it looks something like this:
<Create> <Save>
Request ID: [________]
Comments: [____________________]
+Requestor
+Recipient
+Service
<Create> <Save>
Jobs Report Region
+Audit Region
But I want the new regions to display between the Request ID and Comments page items.
Thank you.

here is how i got someting like that to work with a raoid group.
page HTML header:
<script>
function Show_On_Radio_Value_2(pThis, pThat, pValue, pLabel){
var rv = html_RadioValue(pThis);
var elm = document.getElementById(pThat);
var lbl = document.getElementById(pLabel);
if (rv == pValue) {
html_ShowElement(pThat);
html_ShowElement(pLabel);
} else {
html_HideElement(pThat);
html_HideElement(pLabel); }
}</script>
REGION Footer:
<script>
Show_On_Radio_Value_2('<code>P3_ENT_APPROVAL</code>
','<code>P3_REJECTION_DESC</code>
',"Y",'L_<code>P3_REJECTION_DESC</code>
</script>
I think thats it but it should get you in ther right direction.
jp
Edited by: SHONET on Nov 12, 2008 9:26 AM

Dynamic where clause based on Page Items

I need an example of how to build a where clause with values from page items.
I want to do something like the following but do not know the syntax:
sql_string := ' where lab.ceventno is not null and lab.cts_no_show is null ';
if :P1_RECID is not null then
sql_string := sql_string || ' and lab.recid = ' || :P1_RECID;
end if;
if :P1_CAS_NO is not null then
if :P1_CAS_TYPE = 1 then
sql_string := ' and upper(lab.cas_no) = ' || :P1_CAS_NO;
elsif :P1_CAS_TYPE = 2 then
sql_string := ' and lab.ceventno in (Select ceventno from msds_ing where cas_no = ' || :P1_CAS_NO;
end if;
end if;
:P2_WHERE := sql_string;
I put this in a process that I want to pass to Page 2 when search button is pushed. I'm not sure what I'm doing wrong, but this doesn't seem to work.
When I print out :P2_WHERE, I only get the first line
'where lab.ceventno is not null and lab.cts_no_show is null '
Any help would be much appreciaed
Thanks
Pam

Pam - We need more details about exactly what you are doing, e.g., how are you going to dynamically execute that SQL, what items are on page 1 that will be submitted (all search criteria), what happens on page 2, etc.
But here are a few points:
1. when building a query for dynamic execution, put the bind variables like ":P1_RECID" into the generated SQL, e.g., do this:
sql_string := 'select ename from emp where empno = :P1_EMPNO';
not
sql_string:= 'select ename from emp where empno ='||:P1_EMPNO;They may appear to give you the same results but the first introduces non-reusable SQL into the shared pool (this is bad).
2. When code runs that references user-entered item values on the current page, like "if :P1_CAS_NO is not null", you have to make sure those items have been submitted (as with a page-submitting button) before you reference them. So if the user enters search criteria into form fields, then submits the page, then you reference those items in the SQL-building process, you'll be okay.
3. Watch for errors like your line: "sql_string := ' and upper(lab.cas_no) = ' || :P1_CAS_NO;" which you may have intended to be "sql_string := sql_string||' and upper(lab.cas_no) = ' || :P1_CAS_NO;".
Scott

Hide Page Items - urgent please

I am using 3 page items to display in the header of my report, but I don't actually want Page Items in my workbook...
I've tried making the font/background white and the font size 1, but I still get 3 rectangular boxes where those page items would be. It looks rather strange... how can I hide the page items when the report is printed?
I'm trying to get this ready for Monday (it is Saturday), so if anyone could offer help quickly I'd appreciate it!
Thanks,
Emily

Michael,
Thanks for responding so quickly! Let me further explain the situation to see if you have any ideas...
I don't actually need page items... I have 1 parameter that the user is required to enter which will actually return the other 3 items uniquely for this workbook. The user enters the AP Batch Name and that returns the Batch Date, Invoice Count and Total (there is only 1 record that will be returned). So, the user won't actually choose any of the 3 items to filter the data because they would be given a list of 1 thing. I don't mind making parameters, but only if I can just assign the appropriate values to them and the user doesn't have to enter/see them on the parameters dialog.
Could you explain further what the following means?
[email protected] wrote:
The best you can do is have a second sheet for printing with the page items pushed down into the body of the report. Now you can sort on them and then hide them.
Thanks,
Emily

Page item values lost when moving application from 3.1.1 to 4.0.2

I have an application that is working fine in version 3.1.1, but when I move it to 4.0.2, I'm having some issues with losing page item values. I have a page (6) with master key fields that are used to set page items on another page (7) when I branch to that page. In 3.1.1 the items in the page I'm going to are defined as 'Hidden and Protected' and in 4.0.2 they are defined as 'Hidden' (don't see a 'hidden and protected type'). When page 7 first displays, I see the values I passed in the session items. When I fill in the displayed items on the form and click to create a record, I get errors that the key values are null (these are the items I set when I branched to this page). When I look in the session items now, the values are missing. Why are the values lost and is there a work around?

Hi there,
In 4.0.2 there is no hidden & protected item but instead you have one select called "value protected" you can select yes or no there.
Edit your item and See the "Source" region of your item, in the "Source used" it should be "current value in session state is null" and in "Source type" should be "static assignment..........".
In the "Default" region the value type should be "static text ......."
see if there is any changes in these properties.
thanks
Tauceef

SkillBuilders Modal 2.0 plugin with a page-item button - pass parameters

Similar Messages

Maybe you are looking for