Skip Chapters With Keyboard

I have a video file with chapter markers. Is there any way to set up QuickTime to let me skip chapters with the arrow keys, like I do on the DVD Player application?

Thanks. That makes sense now. Is there a trick or work-around to make each menu button play only a certain group of clips and then return to the main page? I have been sharing the whole project straight to iDVD. Is there a way to do it in stages so there is an end point in each section? BTW I do not have Final Cut Pro.

Similar Messages

After reading and resetting everything with Keyboard I still get blank white screen. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans at full speed.

After reading and resetting everything with Keyboard I still get blank white screen on 2nd? page of boot. The only way I can boot to Mavericks is unplug power cord, push and hold power button while plugging power cord in. Fans run at full speed, machine boots then runs normal except the dvdrw will not . The mid 2011 IMAC had the same problem with LION. I changed hard drives, formatted, and installed a clean install of latest os x mavericks. Any help would be greatly appreciated.
EtreCheck version: 1.9.15 (52)
Report generated August 30, 2014 at 6:56:41 PM EDT
Hardware Information: ?
    iMac (21.5-inch, Mid 2011) (Verified)
    iMac - model: iMac12,1
    1 2.5 GHz Intel Core i5 CPU: 4 cores
    4 GB RAM
Video Information: ?
    AMD Radeon HD 6750M - VRAM: 512 MB
        iMac 1920 x 1080
System Software: ?
    OS X 10.9.4 (13E28) - Uptime: 0 days 0:16:53
Disk Information: ?
    ST3120026AS disk0 : (120.03 GB)
    S.M.A.R.T. Status: Verified
        EFI (disk0s1) <not mounted>: 209.7 MB
        Untitled (disk0s2) / [Startup]: 119.17 GB (87.12 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    HL-DT-STDVDRW GA32N
USB Information: ?
    Apple Inc. FaceTime HD Camera (Built-in)
    CHICONY USB NetVista Full Width Keyboard
    Apple Inc. BRCM2046 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Computer, Inc. IR Receiver
    Apple Internal Memory Card Reader
Thunderbolt Information: ?
    Apple Inc. thunderbolt_bus
Gatekeeper: ?
    Anywhere
Kernel Extensions: ?
    [loaded]    com.nvidia.CUDA (1.1.0) Support
    [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
    [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
    CUDA: Path: /System/Library/StartupItems/CUDA
    FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Launch Daemons: ?
    [loaded]    com.adobe.fpsaud.plist Support
    [running]    com.arcsoft.eservutil.plist Support
    [running]    com.bjango.istatmenusdaemon.plist Support
    [loaded]    com.oracle.java.Helper-Tool.plist Support
    [running]    com.sophos.autoupdate.plist Support
    [running]    com.sophos.configuration.plist Support
    [running]    com.sophos.intercheck.plist Support
    [running]    com.sophos.notification.plist Support
    [running]    com.sophos.scan.plist Support
    [running]    com.sophos.sxld.plist Support
    [running]    com.sophos.webd.plist Support
Launch Agents: ?
    [running]    com.arcsoft.esinter.plist Support
    [running]    com.bjango.istatmenusagent.plist Support
    [loaded]    com.nvidia.CUDASoftwareUpdate.plist Support
    [loaded]    com.oracle.java.Java-Updater.plist Support
    [running]    com.sophos.uiserver.plist Support
User Login Items: ?
    Macs Fan Control
    Firefox
Internet Plug-ins: ?
    FlashPlayer-10.6: Version: 14.0.0.176 - SDK 10.6 Support
    Flash Player: Version: 14.0.0.176 - SDK 10.6 Support
    QuickTime Plugin: Version: 7.7.3
    JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Default Browser: Version: 537 - SDK 10.9
Audio Plug-ins: ?
    BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
    AirPlay: Version: 2.0 - SDK 10.9
    AppleAVBAudio: Version: 203.2 - SDK 10.9
    iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins: ?
    Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
3rd Party Preference Panes: ?
    CUDA Preferences Support
    Fan Control Support
    Flash Player Support
    Java Support
Time Machine: ?
    Time Machine not configured!
Top Processes by CPU: ?
         1%    WindowServer
         1%    fontd
         0%    firefox
         0%    SystemUIServer
         0%    SophosWebIntelligence
Top Processes by Memory: ?
    229 MB    firefox
    156 MB    SophosScanD
    152 MB    InterCheck
    131 MB    com.apple.IconServicesAgent
    115 MB    SophosAntiVirus
Virtual Memory Information: ?
    424 MB    Free RAM
    1.53 GB    Active RAM
    1.37 GB    Inactive RAM
    699 MB    Wired RAM
    1.26 GB    Page-ins
    0 B    Page-outs

I'd start by getting rid of the following software responsible for these extensions.
Kernel Extensions: ?
    [loaded]    com.nvidia.CUDA (1.1.0) Support
    [loaded]    com.sophos.kext.sav (9.0.61 - SDK 10.7) Support
    [loaded]    com.sophos.nke.swi (9.0.53 - SDK 10.8) Support
Startup Items: ?
    CUDA: Path: /System/Library/StartupItems/CUDA
    FanControlDaemon: Path: /Library/StartupItems/FanControlDaemon
Use the uninstaller provided with the Sophos software. You can uninstall CUDA via the preference pane. Be sure you remove the com.nvidia.CUDA extension which is located in the /System/Library/Extensions/ folder. Not sure if Fan Control has an uninstaller so you will have to do it manually:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper
    2. AppDelete
    3. Automaton
    4. Hazel
    5. AppCleaner
    6. CleanApp
    7. iTrash
    8. Amnesia
    9. Uninstaller
10. Spring Cleaning
For more information visit The XLab FAQs and read the FAQ on removing software.
Be sure to remove your two Login Items. Finally do this:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Lion, Mountain Lion, or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

870A Fuzion Power has problem with keyboard and mouse movement only in games.

Hey guys,
recently built a new system and chose to go with the 870A Fuzion Power mainboard, everything has gone very smoothly execpt for one problem, only when I play games like Crysis 2 ect the mouse seems to jolt around now and again and the keyboard decides to stop responding if I hold down the movement keys, and this is only in game not surfing the web for example. Now, I am using a wireless mouse and keyboard but I plugged in a PS/2 keyboard and the exact same thing happened. I've installed all of the drivers that came with this board and the drivers for the mouse and keyboard. Any of you guys ever had this sort of problem or know how to fix this?
Thanks.

I bought a new Macbook pro in june 2010, I didn't have any keyboard or mouse issues prior to upgrading to 10.6.4 supposedly this update was made to fix some issues with keyboard and mouse becoming unresponsive. For me the opposite happened. after the upgrade, my keyboard and mouse (trackpad) becomes sometimes partially unresponsive or totally unresponsive. the only way to solve the problem is by completely turning of the computer and turning back on.. granted it doesn't happen very often.. generally once every about 2-3 weeks but it is still annoying though..
I didn't have a chance to use the computer too much on the previous version (10.6.3) so I don't know if it is software related or hardware related.. any thoughts?
Message was edited by: msoued

How Stop Pop-Up Window: Allow Fullscreen With Keyboard Controls?

How can I cause the cessation of the pop-up window that asks me, "Allow fullscreen with keyboard controls?"
In the last month or two (January- February of 2013), this black, semi-transparent pop-up has appeared every time I go to full screen in the game Battle Pirates on facebook.
After numerous iterations, this confirmation request has become completely unneccessary and nothing more than an unwelcome annoyance.

Tom,
Moderators have the authority and privilege to mark answers as correct, in addition to the original posters. ANY moderator here could have marked it that way.
The Bug report/Feature Request link is not a "vote" page per say, but a place to submit a request for a feature you'd like to see added or dropped from Flash Player. It's the best way to voice a concern or "wish" for a feature, since the development team reads the reports/requests. Management who'd make the decision to add or remove something won't read about it here. They WILL hear about it from development.

TS1381 My left arrow does not work on my macbook pro(model A1226). I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, test all other keys with keyboard view (all others work) - HELP!!

My left arrow does not work on my macbook pro(model A1226).
I have reset nvram, performed a safe boot, pulled the cache to desktop, replaced .globalpreference.plist, & tested all other keys with "keyboard viewer" (all other keys work except for the arrow).
In addition, I have gone thru all the recommended checks with universal access and have booted from snow leopard dvd and the left arrow still does not work.
I have tried using the left arrow key in all of applications I use such as: excel, ms word, address book, calendar, iphoto, terminal, & highlighting an icon and using the arrows to move to another selected icon.
Here is the kicker! In addition, I purchased a logitech solar bluetooth keyboard and the arrows work fine with my ipad but do not work when paired with the macbook pro. All other keys work fine on the macbook pro using the bluetooth keyboard.
I believe this says that the problem is not in my macbook pro keyboard. So where can it be?
Can anyone think of any other rabbit holes I can search?
thanks and regards
vats3

I would also like to add that I've reverted the two cd drive and hard drive mods I did and the laptop is back to factory hardware and there is 0 corrosion or mold visible.

IPod classic hard drive needle sometimes skips (Red X). When it doesn't and seems to power on normally, I start to restore it in Itunes and then it starts to skip again with the Red X on the screen.

iPod classic hard drive needle sometimes skips (Red X). When it doesn't and seems to power on normally, I start to restore it in Itunes and then it starts to skip again with the Red X on the screen. One time I was able to run the disk utility in time and reformat the hard drive, but the red x ended up appearing again and the hard drive started skipping again.
Is there anything I can do besides get a new hard drive?
P.S. I have also tried the banging on palm/floor trick and it hasn't worked yet for me.

There nothing we can suggest to save a bad iPod hardisk, except to try some 3rd Party software to try repair the Hardisk.
The Super Fix for Most iPod Problems
See this earlier post on partition repair using 3rd Party EaseUS Partitipon Master software.

Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road.

Is there a (relatively simple) way to skip tracks with an iPod touch 5th gen using a physical button? I'm aware songs can be skipped on-screen without unlocking the iPod, but I'm looking for a method that doesn't require taking my eyes off the road while driving. For that reason, I'm also not interested in adding in headphones or additional devices that have the desired button functions. Going both forward and back would be great but I would be pleased just to have a "sight-free" way to go forward.
I've seen some mention here and there about ways to maybe change it so the volume buttons change tracks and holding the volume buttons changes the volume... but I don't know what's involved in that or if its even possible/recommended for a new 5th gen iPod. I think its a great device but its sadly lacking in music oriented functions and features... which is disappointing since music is why most people would bother getting one instead of some other "iDevice" :/

Given that you cannot do what you have asked for, perhaps you simply need to find another solution to your root problem.
Presumably, you want to skip to the next track because you don't want to hear the current one, and that is because...
You don't like it.
You've heard it recently and don't want to hear it now.
Simply don't want to hear it at this time.
For problem number 1. Don't put it on the iPod in the first place. (I know, obvious answer!)
For problem number 2. How about playing from a Smart Playlist (initially created in your iTunes Library) which has only songs you've not played recently?
For problem number 3. Hhhmmm! Create alternative Playlists for use in the car.
As for going back to the start of the "now playing" track.... Well, if your Playlist has only songs that you really, really want to hear, then you'll be looking forward to that rather go back to the beginning of the current song.
I'm not trying to be prescriptive, just giving you food for thought.
(They are all cheaper options than buying a car which can control the iPod from the steering wheel.)

Buggy issues with keyboard buttons.

Getting constant issues with keyboard keys in Photoshop. Delete key does not delete layer, Fill layer (Option Delete) only works when I change tools. And it does this intermittently. It's very annoying!
Anyone else have these issues? These are just some of the issues that pop up.

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Updated iphone 5 to iOS 6.1.3, now trouble with keyboard not responding correctly and screen zooming in by itself...

updated iphone 5 to iOS 6.1.3, now I am having trouble with keyboard not responding correctly and screen zooming in by itself...
Buttons pressing themself...
Also, my main screen is permanently zoomed in...
suggestions?

Double tap the screen with THREE fingers, that should get it back to normal again.
Then go into Settings > General > Accessibility > Zoom > OFF.
Not too sure about the keyboard and random button presses though. Back it up and restore from iTunes, see if that fixes it.

Strange things with keyboard

strange things with keyboard happens on my macbook - after cleaning keyboard (rag with spirit) I start mac and get sticky key (continuously type one letter and beeping on speaker). I shutdown mac, remove key and clean space under it... it helps - but I found other strange bug:
pressing left shift - gives me capital letter "O"
letter "O" - always capitalized
| symbol always comes with return button
now I use external keyboard - all good on it... but macbook keyboard still wont work properly
what can it be? how fix it?
ps: sorry for my eng

thanks for your reply, and you might be right about using USB v2.0. The PS/2-USB adapters I am using are v.1.0 so may be incompatible, even though this technology is supposed to be backward-compatable.
Since this problem reared its ugly head, I have disabled the Toshiba applications and monitored the situation - OK so far, but I will keep an eye on it.

When I use my Delete key to delete a song, I get a pop-up. This is OK, except the Keep File button is defaulted and I cannot tab or arrow to the "Move to Trash" button, and so i need to use my mouse. How can I do this only with keyboard?

When using iTunes on my iMac, I use my Delete key to delete a song and I get a pop-up. This is OK, except the Keep File button is defaulted and I cannot tab or arrow to the "Move to Trash" (or Cancel) button, and so I need to use my mouse. How can I do this only with keyboard?

Huh.. Interesting. I went back to check these proceedures and found there is a difference between using the return key or the space bar as the action command.
tabbing the blue ring moves the selection and then spacebar takes that action. The return key takes action of only the blue collored button.
.... learn somting new every day, even if it is somthing I previously forgot

Moving selected objects up and down with keyboard is automaticly applying a colour fill.

Hi,
My InDesign is strangely applying a colour fill when i move an objects up or down using the directional arrow in my keyboard. If the colour pallet is open. Nudging an object up makes the pallet disappear on the first press. It then reappears on the second press while filling the object (text frame) with black. This is instensly frustrating. How can I stop this? Suggestions would be very appreciated.
I have already reset the preferences.
Cheers,

Thanks for your reply.
I fixed the problem by replacing the keyboard!
Cheers,
Nick Meadows
0421 976 704
www.nickmeadows.com
Date: Fri, 30 Mar 2012 06:01:22 -0600
From: [email protected]
To: [email protected]
Subject: Moving selected objects up and down with keyboard is automaticly applying a colour fill.
    Re: Moving selected objects up and down with keyboard is automaticly applying a colour fill.
    created by Peter Spier in InDesign - View the full discussion
I have to ask if you reset the prefs uing one of the methods in this thread: Replace Your Preferences If not, there's a good chance you left out one of the files, so please try again using one of the listed methods. And please tell us the OS and your version of ID, including the patch level. Obviously this is not normal behavior. It sounds as if the Swatches panel has focus when you are pressing the arrow keys.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4302200#4302200
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4302200#4302200. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

HT1657 Downloaded 2 rentals and they won't play. They ask if I would like to begin the rental period, I say yes and it takes me to the dvd screen, but does not play. I hit play, fast forward, skip chapters and nothing.

Downloaded 2 rentals and they won't play. They ask if I would like to begin the rental period, I say yes and it takes me to the dvd screen, but does not play. I hit play, fast forward, skip chapters and nothing.

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

HT201236 how do you make a bullet with keyboard shortcuts?

how do you make a bullet with keyboard shortcuts?

According to this https://discussions.apple.com/thread/1381905?start=0&tstart=0 Option 8 will insert a bullet.

SOS!!! can not type username/password with heart symbol () to login with keyboard.

My child accidentally added heart symbol (♥) in username, and now I can not login into my macbook air as I can not type the ♥ symbol with keyboard. apple tech service said no such experience before.

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Skip Chapters With Keyboard

Similar Messages

Maybe you are looking for