Skype manager - Enter VAT number

Hi,
I am unable to enter the VAT detail of my company in skype manager. As mentioned in the FAQ, I would like to use skype for business purposes and be excempt from the VAT. The process to change the VAT number is detailed in this PDF (page 57), however I am unable to find that in my Skype manager.
Thanks for the help,
Anil

Look at another thread where there is more detail on this: http://community.skype.com/t5/Using-Skype-in-your-business/VAT-Invoice/td-p/3205604

Similar Messages

  • Unable to enter VAT Number

    Dear All
    In Global parameters for company code, I want to enter VAT Registeration Number, but I am getting the following error:
    Entry of a VAT reg.no.is only possible for co.codes in EC countries
    Message no. FC199
    Please advice.
    Thanks & Regards
    Kanwaljit

    Hi,
    Please check whether the COuntry is EU Country or not. In the settings in Country Global setting for the country you are trying to enter the VAT reg No .Path is as follows
    SPRO- SAP Netweaver - Generla Seetings - Define Countries in mySAP system.
    If check for EU Country is there then system will allows to enter the VAT reg no...
    I tnk this will helps you.
    Regards
    Aparna

  • One skype number for multiple users in Skype Manag...

    Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager?
    If so, how do I go about it?
    I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/...

    You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions.
    Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]
    http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf
    7.5 Online Numbers for incoming calls
    You can use both business Skype accounts and Online Numbers simultaneously on a
    single SIP Profile if you wish. In other words, you may have multiple business accounts
    and Online Numbers added to one SIP Profile at the same time.
    7.5.1 Adding an Online Number to your SIP Profile
    Shows you how to setup such
    Thanks,
    Kent C.

  • Which table stores VAT number entered for a company code using T Code oby6?

    Hi
    Which table stores VAT number entered for a company code using T Code oby6?
    please advice.
    Thanks,
    Vaishnavi

    T001

  • Number identification in skype manager

    Hello, there is a skype service called caller identification, which allow to recognise all calls from skype as calls from mobile number. Can this service be activated from skype manager?

    Hello Nikrav,
    I see you are asking about recieving Caller Identification "into" your Skype system.  The answer depends on the local carrier that the call is coming from.  If, that carrier provides Caller ID for each and every call, then the call will show the number coming in.  If not, then the call will always show "annonymous".  It also depends on the device you are using.  If the device supports Caller ID for Incoming Calls, it will work.    You would have to test to see if your local carrier is providing Caller ID in your area.  Not every carrier supports Incoming Caller ID.  That would also apply to the Cellular carrier.
    In the Outgoing situation, if your Caller ID is setup in your SIP Profile, and then authenticated by Skype, you can use Caller ID to display for "Outgoing" calls.
    I hope this answers your question about Caller ID.
    Thank you for using Skype and the Skype Community Forums.
    Regards,
    Victor S.
    Skype Enterprise Support

  • One skype number for multiple users in Skype Manager

    Is it possible to get one Skype-in phone number and assign it to multiple members in Skype Manager? If so, how do I go about it? I also asked this here: http://community.skype.com/t5/Skype-Number/One-skype-number-for-multiple-users-in-Skype-Manager/m-p/3275656#M14366.

    You could always allocate a number to multiple business accounts in Skype Manager. Then re-direct the number via IP-PBX to go to different extensions. Try the following here [If you look in the advanced section of this manual, you'll see an example of two accounts using one number]http://download.skype.com/share/business/guides/skype-connect-user-guide.pdf 7.5 Online Numbers for incoming callsYou can use both business Skype accounts and Online Numbers simultaneously on a
    single SIP Profile if you wish. In other words, you may have multiple business accounts
    and Online Numbers added to one SIP Profile at the same time. 7.5.1 Adding an Online Number to your SIP ProfileShows you how to setup such Thanks,Kent C.

  • Move online number to skype manager

    Hello
    i buy online number in skype and i want move this number to skype manager and use in sip service that i connect my pbx to this sip trunk for receive call and outgoing call.
    please help me.
    best regards
    parsaei

    To be more precise: I do have two Skype online numbers purchased in my private account - can I move these to the Skype Manager account?
    I need a smooth transition in order not to loose the numbers and thus be forced to communicate new numbers everywhere.
    Any help/hint appreciated.

  • Skype Manager Online Number/Business Account Confu...

    Could someone kindly explain to me what is happening.
    I registered a Skype manager account & tried to add an online number to it. However the system informed me that: "Online Numbers are only available to members with business accounts." and wanted me to create a new "Business Account".
    I thought I had just created one & did not want to create another account so there was a link to: http://www.skype.com/go/business.online-number clicked on that & it allowed me to purchase a number for this account. But now in business manager it is showing "Online Numbers" as 0 even though the account that now has an online number is integrated with Skype Manager. Thanks for your input!

    Exactly. I have invested a small fortune trying to set up a Skype Business Account with a set of telephone numbers. Now the whole business has disappeared. telphone numbers and all.

  • UK VAT Number

    When I enter my UK VAT registration number into the company details section in my account, I get the following error message:
    - The VAT number you have entered is not recognised as a valid EU VAT number.
    What is the problem?

    Hi, ADaniels99,
    I recommend contacting the Skype Manager customer service unit; you can click on the link within your Skype Manager dashboard, or contact Skype Customer Service via the usual route, choosing Skype Manager as you work your way through the various steps.
    Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
    As you know you intend to contact Customer Service, skip past Step 2 of the instruction where several articles from the FAQ library will appear for you to review, and proceed to Step 3, Continue Support Request (the "button" appears at the lower right corner of the website page). You may also skip past in Step 4 where you will be referred back here to the Community; no need to do this as the Community is where you started.
    Regards,
    Elaine
    Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
    Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

  • Shared voicemail via Skype Manager?

    Hello,
    I am looking to set up Skype for my business of just 2 people: myself and a colleague.
    We wish to have a single account with a Number and voicemail that we can both access.
    The obvious solution appears to be to just set up a single personal account with these features, but it doesn't seem appropriate to be entering DOB, Gender, etc for a business account.
    Is there any way of using skype manager to achieve what I want? The main purpose of the number is just to direct to voicemail, but it would be nice if it would attempt to call both business accounts in series before doing this.
    Thanks,
    Stephen.

    jakxy wrote:
    In Skype Manager you are able to get a Skype Number to call one of your Skype Accounts,
    Hello,
    A Skype Number can only receive inbound calls.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Skype Manager or Premium - Not Sure

    Hello,
    I just purchased the Skype Premium and I did not receive a phone number.  Was I supposed to?
    I have an assistant in the Philippines to make phone calls for me to the US. Should I use the Skype Manager for business instead of the Skype Premium?
    Thank You!

    Hello jn_48.
    Get an Online Number. Save up to 50% on your Online Number with a subscription.
    1. Purchase confirmation. Once you've bought a subscription you'll receive a confirmation email and a notification in the Home area of your Skype
    2. Dial a number. Click the Call phones button to open the Skype dial pad and enter the number you want to call or choose a number from your contact list.
    3. Enjoy your call. Your calling minutes will decrease as you use them (except unlimited plans 2). If you use all your minutes, or you want to call a destination not covered by your subscription, you'll need to buy either another subscription or use Skype Credit to make pay-per-minute calls.
    Here are the links to the two pages that speak about Online Numbers and Subscriptions
    http://www.skype.com/intl/en/features/allfeatures/online-number/
    http://www.skype.com/intl/en/prices/pay-monthly/
    Hope this helps. If you have anyother questions, just post them up here and I'll try to find the answers for you.
    Beowolfv
    Regards,
    Beowolfv
    -If I Answered Your QuestionThenPlease Give "KUDOS" And Mark It As A "SOLUTION" So Others Can Find Help.

  • To make  the Billing document header  updated with the new VAT number.

    Hi Experts
    Due the business requirement we change the VAT number of  customers  for the European countries.
    And now how can we ensure that the Billing document header gets updated with the new VAT Reg.Number for the existing Billing documents.
    The intention is to ensure that when we Print an already existing invoice,the new changed VAT number should appear in the invoice output.
    Please suggest.
    Montee

    Hi,
       Have these documents been released to accounting? If yes then you have top canecl all the documents to update the billing documents and repost them with the new vat number. I think you might know how VAT gets determined in SAP. If not please go to SPRO-IMG-SD-BF-TAXES-MAINTAIN SALES TAX IDENTIFICATION UMBER DETERMINATION.
      1.  If the payer has a VAT ID number and RG <> AG, then the tax number
          and tax classification are copied from the payer (in this case, the
          ship-to party is not relevant).
          The tax number is taken according to the 'tax country of
          destination'.
      2.  If 1. does not apply:
          If the ship-to party has a VAT registration number and the sold-to
          party does not, tax number and tax classification are copied from
          the ship-to party.
      3.  If 2. does not apply:
          Tax number and tax classification are copied from the sold-to party.
      If you enter A, tax number and tax classification are generally copied
      from the sold-to party.
      The tax number is copied according to the 'country of destination
      relevant for taxes'.
      If you enter B, tax number and tax classification are generally copied
      from the payer.
      The tax number is copied according to the 'country of destination
      relevant for taxes'.
    Kindly please let me know If you need any more information on this.
    Regards
    Ram Pedarla

  • What is the standard field in CRM to store the VAT number from ECC

    Dear gurus,
    I am trying to find if we have "VAT number" as standard field in CRM. I tried finding in CRM but could not find.
    The requirement is to bring the "VAT number" data from ECC to CRM.
    So if there is any corresponding CRM field to store that then it would be easy. Please let me know if you know of this field in CRM. Thanks for your help in advance.
    thanks,
    Randhir

    Hello Randhir,
    In CRM, there is no seperated field to store VAT numbers like in ECC. In CRM, we have a table control TAX NUMBERS on business partners -> identification tab which stores tax numbers.
    Below is the way how the tax number flow and work in ECC and CRM for a sample country IT.
    In ECC -
    On customer master , you will see fields such as VAT reg. number, TAx number1, tax number 2 and so on. Thus when you create a customer for country IT, you enter the required tax numbers.
    In CRM -
    you enter tax numbers on the identification tab. here we dont find different fields, but there are different tax types introduced for each country. Thus for VAT numbers, the tax type is IT0. This tax type is always of the format - <country ISO code>'0'. Thus for DE we have DE0. The concept of tax type is not there in ECC.
    The tax number transfers from ECC to CRM automatically assign a tax type depending on the country and field. And this functionality is available in all CRM systems.
    In CRM. tax numbers are stored in table DFKKBPTAXNUM.
    Hope this information is helpful.
    Best regards,
    Rimzhim.

  • VAT number in OBY6

    Hi,
    When I enter teh VAT number in OBY6 - company code global data, I get the following error.
    Entry of a VAT reg.no.is only possible for co.codes in EC countries
    Message no. FC199.
    My co.code country is RO - Romania. Where do I mention that co.code country is EC country ?
    Thanks in advance
    Anil

    Hi
    I am also facing same problem i am working for country ZA
    kindly let me infore how you resolved this problem
    please help me on this any one
    Thanks in advance

  • Skype blocks Account after sign into Skype Manager

    After years of using skype without a problem and being happy with it, following happened:
    1) my account "kpaessler" was blocked a few hours after I signed into Skype manager. Both the skype account and the Manager was blocked. The answer to my inquiry was that Skype suspects incorrect use of the account.
    So far no refund on credits (about 60EUR) and dial in number.
    2) To get things going, I used another Skype account of mine "nuessering"  to sign into Manager again. Could purchase a 3 months dial in number. Some hours later the Manager was blocked. The Skype account seems to work for skype to skype but Skype blocked the possibility to purchase a Skype in number or to by credit. 
    The purchase of the dial in number of the second account was refunded.
    Both accounts are connected with same e-mail adress of mine.
    What is going on? Has Manager a big problem?
    My "kpaessler" acount has all my adresses and the dial and most important the call forwarding. This is very important to me.
    How to get my this account back to be unblocked?
    Thank you for any help.

    Please contact customer service, they will help you sort this out: https://support.skype.com/en/faq/FA1170/How-can-I-​contact-Skype-Customer-Service
    Andre
    If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Maybe you are looking for

  • How to default rates in a sales order ?

    Hi , I am creating a standard sales order (type OR).In the pricing of the item I have a pricing condition eg.YAGC.As of now I enter the rate of this condition type manually.Where should i maintain the rates so that it is defaulted whenever i try to c

  • Testing VOs that have positional bind variables with BC4J Tester

    Hi I am doing some OAF development for eBusiness 12.1.3 and would like to understand whether VOs that have positional bind variables can be tested using the BC4J Tester in JDeveloper 10.1.3 (the latest version of JDev compatible with OAF development)

  • SQL access not possible (LC10 / LiveCahce)

    Hi All! I have installed my SCM system and LiveCache Client on the iSeries. My LiveCache Server is installed on a Windows 64-bit Server. I am following the post steps to Initialize LiveCache: To initialize the liveCache instance LCA: a) Choose Back (

  • Storing the downloaded song in j2me!!!

    Hi all, How can we download a song from net and store in the phone's memory using j2me? Yes we can store it in a record store but it is accessible only to the midlet , how can we make it accessable to all programs, say making it a ringtone or playing

  • Dvd playing movies

    hi    my son took my computer overseas and used it to watch movies that were not in myregion  australia....now it is stuck on region 2 which does not allow me to change it to play australian movies.....is there anyway i can re-format my dvd to change