Slideshow frame only- not controls

I would like to put a slideshow on my website but I don't want any controls to show at all. Is there any way to do that? I read the threads on here but didn't find any that talked about it.

see my post here for albums page slideshow javascript snippet:
http://discussions.apple.com/message.jspa?messageID=7666335#7666335
and here for replacing mip.jpg files for good quality slideshow:
http://discussions.apple.com/message.jspa?messageID=11097028#11097028
it's all about iweb javascript widget, and the result is this:
http://test.cyclosaurus.com/ImageRotate2/ImageRotate/ImageRotate.html

Similar Messages

Project will not render with 'I-Frame only MPEG'

Hey Adobe, I am posting this at your request.
I previously used to have an old Intel Core2 chip system.
I upgraded this so that my video editing life would be faster. I have a new motherboard, with a new intel I7-4770 @ 3.5Ghz chip. same memory (16Gb-1600), graphics card, hard disk, DVD drive, etc..
On the Core2 system, video projects which I worked on all worked fine. I mainly use a Sony Z5 to shoot video which creates .M2T files.
On my old system, running Premiere CC it ALL WORKED - no problems, but on the new build, it crashes EVERYTIME i try to render, with 'Error Compiling Movie - Unknown Error'
Having spent FOUR hours on the phone to your tech supports in India, they came up with a workaround. I stress - it's a workaround, not a solution.
They found that if i changed the sequence to be 'Custom' and then selected 'Microsoft AVI' (and any Codec, doesn't matter which) as the Preview File Format instead of 'i-Frame Only MPEG' then yes - it renders.
The tech told me that this was because 'M2T' files were fussy, and needed to be treated like this.
WRONG!
if this *needed* to be the case, then why did it work previously on my old system without any problem?
Also, if I take a project that crashes on my desktop PC, and copy it over onto my laptop, de-activate Premiere on my desktop and activate on my laptop and run in on there .. IT RENDERS FINE, using the 'I-Frame Only MPEG' setting.
Also, i shot some video with a Nikon D5100 which produces full HD .MOV clips, *AND THE SAME PROBLEM STILL OCCURS* when rendering on my desktop PC, and only renders when i switch the Preview File Format to be 'Microsoft AVI - so it's not related to the .M2T video file type.
So I can render stuff, but ultimately it's a workaround and not a solution, as when I am finished with a project, and want to archive it off I do so by exporting and choosing 'Match Sequence Settings', with with Microsoft AVI selected, it wants to therefore obviously export it as an AVI, which i do not want - I want to export it as 25mbps MPEG which is the original quality/format that it was shot at. When i try and do this with 'i-Frame Only MPEG' selected as the sequence type - you've guessed it, Media Encoder crashes
So. Why does i-Frame Only MPEG work on one machine (my laptop), but on my main machine (desktop) which i want to use, it doesn't? What piece of software/codec/file am I missing?
- i have installed from clean build of Windows
- i have deactivated and reactived Premiere CC
- i have uninstalled Premiere CC and reinstalled it
- i have uninstalled all Cloud CC programs and reinstalled them
- I have run CC cleaner too
- I have the latest video drivers for my graphics card (it is the same graphics card that worked just fine on my old system anyway, so is not the issue)
- I have full Windows/Admin permissions. it is not a permissions problem
please don't suggest any of those options. None of them work. I need someone who understands your software and knows what i-Frame only MPEG is to be able to tell me why it isn't working on my system. I am now past the point of anger (because i have lost several days worth of worktime - and thus money) and being upset (because it's massively frustrating when somthing that previously worked now doesn't), and am now just at the point of being bewildered that no one there can seem to tell me what is going on here, and how to solve it.
Many thanks,
Geoff.

I have to put in my 2 cents...and first of all I'm sorry things are happening that are not FANTASTIC results... etc... but there may be ways to make things better... but this stuff is complicated and extremely computer intensive ( math stuff with cpu and ram and stuff ) .. so the platform is very critical to best results.. not just the software.
There's books on compression and how that stuff works ( lossless or not ) and it's all about changes from frame to frame and how to best make file size smaller while keeping every single pixel perfect in each frame... and this is unfortunately not standardized on planet earth. Different companies make up what they can to sell cameras and recording medium and so on.. there are some standards ( for broadcast and movies etc ) cause at some point some groups have to deal with delivery to PEOPLE to watch stuff.. and have decent quality to watch...
In general this is very complicated and full of problems cause there is no single work flow , and probably never will be .
What Jeff is talking about ( I think ) is that during the process of a computer program interpreting images ( frame by frame ) those pixels that have not changed a lot are described in a line of code by the software that says, " This stuff has not changed much if at all ". Some stuff from one frame to the next one DID change a lot ( someone walking or someone running.. the running changes more fast ) .. and so lines of code say , " this stuff changed a LOT "....
During the process of the software to determine what changed and how MUCH changed.. is complicated.. cause the program basically looks at frame A and then Frame F and notes the changes of pixels... and THEN ( as if that wasn't complicated enough ) the program then goes BACK to frame A and then ahead to frame J ... so now it has expanded it's look at what changes have occurred...
Now the ' CODEC " ( the specific codec used by the program you are running , like CC or avid or FCP ) is going to make it's best GUESS as to what really changed that matters the MOST to the image...so you basically get a nice image from A to J ..... but it is now compressed and taking up less room on your hard drive and ram etc....cause it is interpreting the image changes... and so on...
So if you had every single frame without any guess work and no compression to save space cause those pixels did not change between A and J .... you would have HUGE FILES .... and no benefit in terms of being able to edit anything on a little home desktop computer... even if you have a really powerful one.. it is not going to be good enough to do that stuff....
It would be unfair to say that adobe isn't doing the best they can to accomodate all the camera manufacturers " codecs " and give the best results they can , with a million different computer platforms and hardware out there you can buy off the shelf ....
The I frames and B frames and other frames have to do with the " guessing game " of changes in pixels, changes with every " action " in those ranges of frames, and is very complicated... but there are books about it and what standards exist can be researched and studied if you're into that stuff....
I am an idiot about this stuff but the main thing is dont give up.. and just try to be patient when things dont work out like you thought they would, and figure out what is going on so you can make things work the way you want...
and good luck !

Content canvas is not displaying . It contain only one control block .

Hi ,
In my form , i have only one control block . in this block i have one display item. I have specified canvas for this item as "CANVAS4".
I have created "canvas4" . and i have adjusted display item position in canvas. In this case while running form , it is not displaying my content canvas.
Canvas is disappearing .
Can any one please help me .
Thanks in advance ,
Sanjeev.

Please take a look at: http://blogs.oracle.com/shay/entry/10_commandments_for_the_otn_fo
In order for anyone to offer valuable feedback, we ALWAYS need to know what product versions you are using, which Operating Systems are involved, client side information (browser, jre, os, etc), and if an error is involved, what are the details of the error.
Craig...

Firefox does not display frames, only lists. Help!

popular websites, e.g. youtube, are not displayed properly in so far frames are not displayed, only clickable lists of text. Please help!

It sounds like Firefox is, for some reason, not loading the CSS file for YouTube and other sites.
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

Since I have iTunes match, why does my iTunes library not appear in iPhoto music options for slideshow?; only songs purchased or placed on iTunes over a year ago appear in the iPhoto library under the iTunes or purchased option.

since I have iTunes match, why does my iTunes library not appear in iPhoto music options for slideshow?; only songs purchased or placed on iTunes over a year ago appear in the iPhoto library under the iTunes or purchased option.

10/20/14
Yes, I am signed in to iTunes match on the macbook pro, iPhone , & iPad (all updated & correct music libraries) where I bought all the tunes but still no updated tunes on the iPhoto music library after 3 days of being on iTunes match.
Thank you,
TMAbanjoman

I use a brower to control a VI ,but what display in the brower is only a HTML,and I can not control it.

I want realize remote controling.So I use a brower to control a VI ,but what display in the brower is only a HTML,and I can not control it.

> I use a brower to control a VI ,but what display in the brower is only
> a HTML,and I can not control it.
>
> I want realize remote controling.So I use a brower to control a VI
> ,but what display in the brower is only a HTML,and I can not control
> it.
You don't say what version you are using, but LV6.1 added remote control
of panels.
If already using LV6.1, look it up in the help and try out the examples.
Greg McKaskle

Dropped frames only on xserve raid

dropped frames only on xserve raid
i'm not able to capture on xserve raid without dropped frames. tihis was a working sytem bud one morning it dosn't work. i capture on mac pro internal drives or external fw drives without problems.
the xserve raid is new formated in raid level5 [mac os extended journaled and striped in raid 0 extended] and the risult of kona system test are 178mb/sec write and 167mb/sec read.
must bee enought for 8bit uncompressed pal, no? also if i divide the stripe set the system dosn't work on both controler. i tried also to change the fibrechannel cables!
i checked also the fibrechannel card with expansion slot utility and the message is that runns at maximum speed.
there are no error message on raid admin, the xserve raid appears ok.
i'm shure that the fcp settings are ok, i know the list that regard dropped frames from apple.
i'm desperate, can you help?
thanks jochen
system:
mac pro 2x3ghz-5gb ram(from apple and the hardware test on the system dvd is ok)
osx 10.4.10
fibre channel card: lsilogic firmware 1.2.18.0 in slot 4
xserve raid 15x250gb firmware 1.5.1/ 151c
aja io (driver 3.0)
raid admin 1.5.1 (diver 1.0)
fcp 5.1.4

I'm guessing conditioning is the same as optimization, but I can't find anything about it in the help documentation. I ran another capture test today with no problems.
An interesting side event is that when I started experiencing dropped frames I ran the Kona System Test utility to verify write and read speeds. It wouldn't run (no write or read) on my RAID. I tried it on my Firewire drives with no problems. I discovered that in the Kona System Test preferences there is a choice of I/O API for Macintosh or Unix. When switching to the Unix I/O API the test ran fine with expected read and write speeds reported. I've used the Kona utility in the past without having to change that setting. I sent an inquiry to AJA.

Slideshow - Stills/Audio Not Exporting Correctly

I have a problem with a slideshow project I’ve been working on for a few days in Premiere Elements 10.
First, my system:
Dell Studio XPS 9100
Intel Core i7 @ 2.67Ghz
12Mb DDR3 SDRAM (1333Mhz)
ATI Radeon HD 5800 video card 1GB RAM
Windows 7 64Bit
750Gb Seagate ST3750528AS HD, 7200RPM
I insert the soundtrack in Audio 1 and then insert about 100 photos one at a time. When inserting each photo, I adjust the still duration manually to match the rhythm of the soundtrack. When I’m done, it all lines up beautifully when I play it in the app. Then I save it as an MPEG and play it back, but the still transitions are off from the rhythm by a few milliseconds; just enough to be unusable.
It’s a little frustrating that what I see in the app is different from what the app outputs. I’ve tried different MPEG formats (NTSC DVD Standard to HDTV 1080P 29.97 High Quality).
Any suggestions would be greatly appreciated.

Ah. Sorry about that! I know just enough about this program to get a headache
Stills were larger than 1000x750.
Sizes of imported photos: 4288x2848, 2848x4288
PROJECT SETTINGS
General:
Editing Mode = HDV 1080i
Timebase = 29.97 frames/second
Playback settings = Desktop video display during playback (checked), External Device (none), 24p Conversion Method (Interlaced Frame), Aspect Ratio Conversion (Hardware if supported, Desktop Audio radio button selected), Export (external device = none), Disable video output when in the background (checked).
Frame size = 1440 x 1080
Pixel Aspect Ratio = HD Anamorphic 1080 (1.333)
Fields = Upper Field First
Display Format = 30fps Drop-Frame Timecode
Title Safe Area = 20 & 20
Action Safe Area = 10 & 10
Audio:
Sample Rate = 48,000 Hz
Display Format = Audio Samples
Capture :
Capture Format = HDV
Video Render:
Video Rendering = Maximum Bit Depth (unchecked)
File Format = I-Frame Only MPEG
Compressor = MPEG I-Frame
Optimize Stills = Checked
I’m not sure how to share or export as .avi.
Thanks!

Output clip, first frame does not match rest of clip

If I take After Effects and create 30 seconds of red, that is r-255 g=0 b=0, then output this to tape in FCP the first frame does not look like the rest of the clip. I render out in AE using BlackMAGIC 8bit 1920x1080 size movie. Imports into FCP without complaint. Layoff to HDCAM-SR.
If I take a solid green clip and do the same thing it also changes on the first frame layoff.
If I take gray it does not change.
If I change the FCP sequence to use RGB processing (to match AE) this does not change anything.
This happens on more than one machine as well, and is restricted only to FCP.. The BlackMAGIC Deck Control software that they bundle with the cards does NOT exhibit this issue!
FCP v6.0.4

17 macs crankin out spots everyday.
I would like to know if other people out there see the same prob.
It looks like if something was digitized with FCP, it will output fine.
If files come from another app, the above prob results.

InDesign auto-size frame feature not working in real time in InCopy why?

We have just recently migrated from InCopy CS4 to CS6 to take advantage of the new features like the auto resize frame option, however it now seems that this feature is not working in real-time.
Basically the steps are needed to be complete before it auto-resizes the frame in InCopy, we use both layout and assignment based workflows:
1. From an ID document ('doc1'), exported a 'layer' to IC, certain frames are set to auto-size in height using the text frame options. So that editorial can review and make changes to text and the frame should resize according to the specifications set. IC stories are saved to a folder located in a content folder inside the top issue working folder.
2. Editorial opens the IC software, then opens the ID 'doc1'. Check’s out correct .icml file and makes edits to frame with auto resize.
3. Frame does not resize according to text frame set options and InCopy file does not respond in same fashion as InDesign.
4. Change only occurs when InCopy file is closed and updated in InDesign, which is frustrating as this feature would save huge amounts of time serving editorial requests.
Has anybody experienced this type of workflow problem? If anyone can provide mw with some pointers as to what can I do to get this to update in real time perhaps run a script? Update file in InCopy and refresh I will very much appreciate their assistance. I have run out of ideas.
Thanks!

We've had all sorts of problems with this feature as it should've worked straight out of the box but after some testing we have found that its something to do with the way you open the actual file in InCopy. Which is far from ideal and should have been UAT by Adobe before release.
This will not work consistently work if you open the designed .indd or .icma file in InCopy using the file open command within the application.
If you need this to work, the InCopy user has to open the .indd or .icma file by dragging and droping from OS windows explorer into InCopy, we use Windows 7 acrros all the teams. Check out .icml files add text changes to the set auto resized frames, this process will expand/collapse the frames to fit the content but as you have to use the drag and drop method to open the .indd and .icma file, 2 users cannot access the same time doc at the same time (a serious flaw in the programming architecture!) which stops people working in parallel. Save changes, check in .icml content and close .indd or .icma.
However the flaw comes in if you then open the .indd and .icma file in InCopy using the file open command within the application, before an InDesign user opens and saves the file (updates the design). The corrections added in the previous stage above, will not show the frames expanded/collapsed to take in the added text and instead show over matter???? The only way around this is to ask an InDesign user to open, update and save the design that way the InCopy user will see the same result no matter what file open method they use.
Another suggestion is to design the page to have some of the auto resize frames anchored within main body of text and that way the frames will expland/collapse when checking out and editing the content. However, this does cause issues with InDesign crashing etc. so we have tried to stop this method within the working group.
Have you experienced other more serious issues with InDesign crashing consistently when re-importing .icml files? See other forums here:
http://forums.adobe.com/thread/671820?start=80&tstart=0
http://forums.adobe.com/message/5045608#5045608
As far as we can see this is a major flaw in how the application(s) work, we have an enterprise agreement with Adobe and purchase a large volume of Adobe products globally but so far the technical support team are unable to find a solution to this and I'm not hopeful of any resolution soon even with the new release of Adobe CC.

I can not control my cursor with the trackpad. It moves randomly. It began after an Angry Birds update. Anyone else have this problem?

I have a late 2011 OS X Lion 10.7.4 that is only 6 months old. For the first 4 months I had no problems, but then about 6 weeks ago I downloaded an Angry Birds update from the Apple App Store, and my problems began. When playing Angry Birds the the new Angry Birds update for the first time the cursor began to jump around, moving on it's own as if someone else was controlling it. After a few moments I became obvious I could not control the cursor with the trackpad. When I placed the tip of my finger gently in the center of the trackpad to try to hold the cursor still it becan switching from the game (desktop) to launchpad and mission control. I then put the computer down so I was not even touching it, walked several feet away and the cursor still moved on it's own.
I've done a lot of research over the last few weeks on related articles and realized this is a common problem with numerous different causes: PRAM settings,
screen sharing, remote settings, having fingers accidently touch edges of trackpad, writst resting too close to trackpad, swollen battery, etc. and I don't think it's due to any of those issues.
The problem came out of nowhere. My computer stays at home, and is not used by anyone else. At first it was just Angry Birds, but now it can happen at any time. Sometimes hours or days go by when this does not happen, sometimes it happens so much I can't use the computer at all. It can get so bad that I won't be able to click out of whatever I'm doing on my desktop, and I'll have to shut it down by holding the power button.
Has anyone else had this issue after updating Angry Birds?

try a new/fresh apple brand cable and make sure it is the only usb cable in use. this worked for me, i noticed i had no problem with a lighting cable. i did a restore from scratch and from backup and it did not help me...and if you cant sync than you wont be able to get anything but apps back after the restore

Is it possible to use *only* voice control - no keyboard or mouse at all?

Short story, hope you can bear with me.
I have a client who was using Windows for years. He has some disability that means he really can't use a mouse or keyboard. He has been using Dragon Naturall Speaking for about 5-7 years *on Windows*. He also has a Wacom tablet, but uses it sparingly.
About 6 months ago, he was having problems and was fed up with the problems he was having on his Windows machine. He called me and said "That's it. I'm going to Mac." He bought an iMac the next day, about two weeks before Lion was released. He had also purchased Dragon Dictate for Mac.
I set it all up, installed it and he was ready to start training Dragon.
A few months later, he calls and says, "I need to install Windows on my Mac because the Dragon Dictate for Mac is useless. I've spoken to them and they admit that there are several things you just can't do. Like moving the mouse." I think he means things like dragging an item into another folder, or drawing a box around several items on the desktop in order to trash them or copy them or drag them into an email as an attachment, etc. I keep asking him to be more specific, but all I can really get is that It. Can't. Be. Done. On. A. Mac.
And that, of course, really makes my skin crawl. I mean, come on, it's a Mac. They have *great* features for Accessibility. Surely, this must be a solved problem.
But, I have looked. I looked at the additions in Lion. I looked at the literature for Dragon. I have tried to do it myself on my computer. So far, I'm stumped.
I understand that there might be a learning curve, such as learning to say *where* you want something to be dragged to, instead of actually dragging it there visually. "Move selected document to Documents" and so on. But, I'm still hard pressed to find a way to do *every*thing (or a 99+%) using only voice control.
Does *any*one have any ideas, suggestions, thoughts, solutions?
His solution? He bought a used Windows computer today. I've copied (again) all his data from his iMac back to the Windows PC and installed Dragon Naturally Speaking, etc.
Surely, this can't be the only solution. There *must* be a way to do this on the Mac. Right?
Thanks.

Hi again,
I checked the Bios of my neighbors A100, so he has no option for Wake-on-Keyboard, too. I think its not implemented in that bios.
If this helps you: try the latest bios for that machine, maybe the implemented that option in a newer version.
Greets man

Frames suddenley not working

I am a teacher webdesign.
I used dreamweaver for 3 years, and stopped for 1 year.
Now I restart and I see that links in frames do not open in
other frame's, but they open a new browser window... am I the only
one with this problem?
If I make the frameset based on the samples in dreamweaver,
they work...

You teach web design?
If so, please tell me you don't teach your students to use
frames except to
warn them of the many pitfalls.
Walt
"ababa" <[email protected]> wrote in message
news:gc04p7$m7f$[email protected]..
>I am a teacher webdesign.
> I used dreamweaver for 3 years, and stopped for 1 year.
> Now I restart and I see that links in frames do not open
in other frame's,
> but
> they open a new browser window... am I the only one with
this problem?
>

Repeating frame does not shift upwards !

Hi , i have a simple report which is built in a parent-childern pattern .
the layout consists of parent repeating frame and inside it a child repeating frame.
the parent and the child frames has a print on the first of the enclosing object property set.
in the first page the parent and the child frame are printed together well.
the outcome in the second page should be 2 child frame printed one after the other since
the parent frame is not printed and therfore should shift the first child frame upwards taking it's place
and by that leaving space to print the one after it .
instead only one child frame is printed in the same location as the previous one.
i have tried every possible combination of values in all of the properties of each repeating frame ,
including adding and removing regular frame that encloses the repeating frames .
nothing help.
it is a very important report and need help urgently.
Please help.
Thanks you.

probably a bug in repors .
i just resized the whole report and it worked .
thank you for your replay.

HT204291 Hi, I have the apple tv icon in i Tunes but when I click the icon only a small window comes up with only speaker control, no option of turn mirroring off or on. any ideas?

Hi, I have the apple tv icon in i Tunes but when I click the icon only a small window comes up with only speaker control, no option of turn mirroring off or on. any ideas?

thats not how airplay mirror works
read this
http://support.apple.com/kb/ht5404

Slideshow frame only- not controls

Similar Messages

Maybe you are looking for