[sloved] groups problem

I accidentally removed my groups with usermod, so that now I'm only in group archnildon:
-G, --groups GROUP1[,GROUP2,...[,GROUPN]]]
A list of supplementary groups which the user is also a member of. Each group is separated from the next by a comma, with no intervening
whitespace. The groups are subject to the same restrictions as the group given with the -g option. If the user is currently a member of a
group which is not listed, the user will be removed from the group. This behaviour can be changed via the -a option, which appends the user to
the current supplementary group list.
Which groups I should be in? I just know that for getting sound to work I must be in audio group. But maybe there are other groups and thats why I'm asking.
/etc/group:
root::0:root
bin::1:root,bin,daemon
daemon::2:root,bin,daemon
sys::3:root,bin
adm::4:root,daemon
tty::5:
disk::6:root
lp::7:daemon
mem::8:
kmem::9:
wheel::10:root
ftp::11:
mail::12:
uucp:x:14:
log::19:root
smmsp::25:
http::33:
games::50:
network:x:90:
video:x:91:
audio::92:mpd
optical::93:hal
floppy:x:94:hal
storage:x:95:hal
scanner:x:96:
power:x:98:
nobody::99:
users::100:
locate:x:21:
archnildon:x:1000:archnildon
dbus:x:81:
hal:x:82:
avahi:x:84:
mpd:x:45:
policykit:x:1002:
Last edited by archnildon (2008-11-01 19:49:52)

byte wrote:audio (sound), video (some Xorg drivers need it for DRI, also needed for TV stuff), optical (DVD etc), floppy (if you have one), storage (USB sticks), lp (printing), scanner & camera (again, if you have the hardware)
tyvm!

Similar Messages

Report design Grouping problem

I'm currently designing a report, something like an invoice. The invoice number is usually on the page header. But now i want to create a report to list down all the invoice numbers in the 'details' but when i drag the 'invoice number' data to 'details'
it only show 1 row of numbers, wheareas the data has few rows of it. How can i make it view all my numbers?

Hi Eugene,
Thank you for posting in MSDN forum.
Since this forum is discuss the VS test issue, so
I’m afraid that it is not the correct forum for this issue.
As you said that the report design grouping problem, I suggest you could try to consult this issue directly to the VS Report Controls forum:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols , maybe you will get better support.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

UME Roles/Groups problem

UME Roles/Groups problem
I have installed an ABAP +J2EE instance with the view of using it for Adobe Document Services.
While following the Adobe Document Services configuration guide, Step 3.2.1.1:
I'm creating a role in the ABAP engine, creating a user (ADSUser); creating and assigning the role (ADSCallers) to it.
When I start visual admin, i expect the user to be shown under the 'group': ADSCallers.
While I can see the user in visual admin, I'm unable to see the group (role in ABAP instance)
I'm on SP19 NW2004. Any views???

There is a delay before roles show up as groups on the Java side. The delay runs about 30 minutes. See http://help.sap.com/saphelp_nw04s/helpdata/en/45/af3ac012d32e78e10000000a155369/frameset.htm
-Michael

Report based on a reord group - PROBLEM

Using Reports Server / Forms/Reports 6i
I am trying to run a report based on a record group on the web. It fails giving the error 'Cannot run report.'
The report is called from a form and the record group is passed as a data parameter. It works fine in Client/Server.
I have tried to remove the data parameter and run the report without it but, despite working in the Client/Server environment, it still fails on the Web.
Does anyone have any suggestions?

I have found the answer to my problem in the forms forum!
Apparently, this type of report won't work on the web and I have to use temporary tables!

How do I resize pinned tabs/deal with tab group problems in Firefox 22?

With the automatic update to Firefox 22, my pinned tabs have ballooned in size; not only does this look horrible, but it reduces the real estate available for other tabs. While NoSquint has sorted the issue with websites randomly resizing themselves, everything else (add-on menu, toolbar icons) has also increased in size, which affects what can be displayed.
Another problem with 22 is that my tab groups are no longer behaving normally: I click on one group and another group moves around the screen, typically jumping behind the original group I clicked on. Any suggestions for how to improve these problems are much appreciated.

hello, firefox 22 is now respecting the pixel density you've set on a system level in the windows control panel > appearance > display. more information about that is availbale at http://windows.microsoft.com/en-us/windows7/make-the-text-on-your-screen-larger-or-smaller
if you want to set the text size/pixel density in firefox different from that of your system's settings like it was handled in prior versions, enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''layout.css.devPixelsPerPx'''. double-click it and change its value to '''1.0''' (or any other zoom factor that fits your purpose; 0.8 equals 80%, 1.15 is 115% and so on..., -1.0 is the default value and will adhere to the system settings).

Detail Group Problem

Hello All,
I have a DB that uses intermediate tables a lot. An intermediate table is one that breaks up a many-to-many relationship between two tables; by putting a table between them that uses the primary keys from both tables.
E.g. EMPLOYEE and PROJECT tables: Many Employees work on One Project; or One Employee works on Many Projects.
Here's the JHeadstart problem (9.0.4, Struts/UIX): Using the XML Application Editor, I created a Group called EMPLOYEE (select-form) and added some Lookups to it. I then added a Detail Group called EMPLOYEE_PROJECT and set it up as a table on a separate page. The application compiles without errors, but when I bring up the application and click on the "Employee-Project" tab, I receive the following error:
JBO-27122: SQL Error. "Select EMPPROJ.empid, EMPPROJ.projid, FROM EMPLOYEE_PROJECT empproj WHERE (EMPPROJ.empid =: 1) ORDER BY EMPPROJ.empid, EMPPROJ.projid"
The error comes from the WHERE clause, specifically the "=:1" part. SQL Worksheet calls the error a bad bind variable when I run the query in it. What's funny, is that the Master Detail page had Employee Number 5 up; so the query should have had the employee ID of 5, not 1. No matter which employee I bring up on the master view, I still get the same WHERE clause with the "=:1" error.
I tried adding other intermediate tables to the Master Employee detail group and get the same results.
Anyone see this before?
I suspect there's a JHeadstart setting somewhere related to the Master Detail, but I'm stumpred as to what it is.
Any thoughts or opinions would be appreciated.

Tracy-Paul,
Are you using JDeveloper 9.0.3.3 or 9.0.3.4?
If so, you are probably running into BC4J bug 3214032. In the JHeadstart 9.0.4.5 release notes the following info is included:
3214032: JBO-27122: SQL error during statement preparation and ORA-1722 INVALID NUMBER IF PARENT VO ROW IN VIEW LINK REORDERS ATTRS. This bug can occur if you are using the BC4J libraries of JDeveloper 9.0.3.3 or 9.0.4.0 (or 9.0.5 Preview) and in one of your View Objects the Primary Key attribute(s) have a different index number than the Primary Key attribute(s) in the corresponding Entity Object. For example: in the Entity Object the primary key is the first attribute, but in the View Object the primary key is the last attribute. If this occurs, a workaround is to change the order of the View Object attributes.
So, you can try to reorder your attributes, or to use the BC4J libraries of JDeveloper 9.0.3.2.
We have been in close contact with BC4J product development about this bug, and they promised to publish a one-off patch for this bug on metalink as soon as possible. So keep your eye on metalink, you can also read the bug report there.
Steven Davelaar,
JHeadstart Team.

PO Release Group Problem

Hi All
This problem regarding Purchase Order Release Strategy.
I have deleted the existing Release group : 02 and created New Release Group: 11 for Purchase Order Release Procedure.
I deleted Release Group 02 and Release strategy in sequence.
But still when I'm using ME29N transaction, system using release Group 02 not New group 11.
I verified all Release Group related tables.
T161E,S,G,F,
T16FG,FH,FT,FC,FD,FK,FB,FE
But there are no entires for Release group: 02.
when i look into EKKO table, purchase order linking automatically to release group 02.
from which table system pulling this?
How to solve this problem
Please suggest
Thanks
SUNIL KUMAR

If these all the POs were created before you delete the release group and created new than system will not take new release group
you have to put it the old one back and release all the POs which has old release group than you delete the release group
you can keep the new one so the new POs created based on the new release group
in sm30 check this both table
V_T16FG_2 and
v_T16FG
should be clear

Discover group problem with cross tab report

Hi, I'm working on a cross tab report in discoverer 4i and I'm having a problem with two of the colums. I'm doing a count on one field but because they are called something different they are being shown as two seperate columns rather than 1.
I have one called 101 -AVG and another called 101-AVG. My condition pulls every result back that starts with 101 in the table. So because in the table the values are different it breaks the count into totals for 101 -AVG and 101-AVG.
Is there some way I can group these results together into one field?
thanks,
Ian

Pitson,
better to ask this question in the BI Publisher Forum than here in the Oracle Reports Forum:
BI Publisher
Regards
Rainer

Response Group problems

For the past few weeks I have been struggling with launching response groups and I am hoping someone might be able to help.
Little background on my config –
2 – Frontend 2013 servers (5.0.8308.556)
Sonus SBC1000 voice gateway, 1 PRI
Stuff that works – Direct calling inbound to end users works great!
So here is my problem. I set up a response group with a direct dial number to the outside and assign my people to the group and everything is good.
For about 15mins response groups work great! After about 15mins response groups stop working and calls to response groups are no longer picked up. This also affects chat with response groups.
When I turn on the logging software inside Lync I get these messages when the calls are dropped;
TL_INFO(TF_COMPONENT) [1]3784.356C::04/14/2014-14:24:54.627.018e2f49 (RgsCommonLibrary,RgsLogMessage.ReportMessage:2111.idx(227))
_rgs_message_begin_
Direction: Incoming
From: tel:+15555555555
To: sip:[email protected]
Message: CALLCONTROL: Call declined because CallControl is not started
WorkflowId: 08d328a20de8419caad0dee898586051
TL_ERROR(TF_COMPONENT) [1]3784.356C::04/14/2014-14:24:54.627.018e2f4a (RgsHostingFramework,CallControlManager.HandleAudioVideoCall:2049.idx(619))
(0000000000C9D21E)Call is declined because Call Control is not started.
I then simply restart response groups on one of the FE servers and they come back (for a short time) -
Here some interesting events logged in the Lync Server event logs after Response Group Service is restarted –
LS Response Group Service – 31028 - A WorkflowRuntime cannot be started.
Lync Server 2013, Response Group Service Match Making could not find the Contact object used for subscribing to agents' presence. Cause: The application has not been properly activated or the Contact object was deleted. Resolution: Deactivate and then activate
the application for this pool.
I am willing to try just about anything to get this to work. Any ideas out there? Thanks for all your help!

Please check if the application server is active(lync control panel--Topology--status--double click your FE SERVER--applicationserver).
If the application server is not started, please start it. If it is started, restart it.
If issue still exist, use following steps:
use following command Get-CsApplicationEndpoint
And check for messages in "Yellow"
Locate the Identity in Active Directory using ADSIEdit
And Delete the "CN" located at the end of the Identity String
And try and add your Line URI or Response Group SIP Address.
Also you can refer below link
http://social.technet.microsoft.com/Forums/lync/en-US/cd25ddec-6e1e-4d58-9a9a-a530abfa82e3/response-groups-not-working
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical

Grouping problem

Hi all,
I am trying to make a report in reports 2.5 where i am calculating a customer wise outstanding amount. Based on customer outstanding, we have some funding done by bank base on the credit limit of customer.
for e.g customer a has outstanding balance of 500000
the credit limit of customer is 350000 only so the bank funds us with 350000
if a customer has outstanding of 50000 and credit limit is 100000 bank funds us with full 50000 amount.
so in a formula column we calculate the amount which can be funded by bank.
in the end of report we have to show a summary of currency wise outstanding and fundable amount.
the problem is that when i do a customer wise currency wise grouping and the customer has more than 1 currency the summary total shows a different figure.
the case is that the customer has credit limit of 350000
invoices in USD are of 250000
invoices in EUR are of 250000
the customer should only have a fundable value 350000 out of 500000 outstanding but as the currencywise total is less than 350000 it takes the full amount of 500000 in summary.
can anybody please suggest me a way out.
Thanks a lot in advance
warm regards
Vivek Bajaj

Hi,
Hard to guess data model at your site, still you should have created currency wise groups in data model. I suggest you to keep amount and currency in seperate group and create summary item which will sum amount.
This way you will get result.
Adinath Kamode

LMS 3.2 Common Services User Defined Groups problem

CiscoWorks LMS 3.2 is installed on Windows 2008 64-bit server.
All devices are added into appropriate User defined group in Groups/Common Services.
All groups are fine except that Members of group named Switch-HO-access have been copied also to group named Router-Branch by system for unknown reasons.
At few files we have noticed errors :
" FATAL com.cisco.nm.xms.ogs.server.OGSServer main Exception while OGS Server start up: CTMRegistry::startRegistryServer() : Can't find/start registry server " and
" com.cisco.nm.xms.ogs.util.OGSException: CTMRegistry::startRegistryServer() : Can't find/start registry server ".
What is the reason for copying this devices and is there some other underlying problem?

it seems that the errors you see correlate with regular stopping/starting of the LMS processes (dmgtd) so this would be a normal behaviour.
Can you provide a screenshot of the problem you describe and also the rule for the group Switch-HO-access and Router-Branch

Stock Item Group problem

I came accross a problem as follows:
1. An Item Group called "SAMPLES" is set to Default Valuation Method to FIFO
2 A Stock Item called Hand Cream Sample is set to GROUP = Samples
3. I expected the Hand Cream Sample item to show FIFO under the Stock Data tab in the Item Master however it shows Moving Average valuation method.
Most of my Items show correctly the valuation method set in Item Groups but I have a few that do not follow this pattern. Any ideas how to correct this and why is this showing incorrectly?
Thanks
PS I use B1 2007version
Robert

Hi Istvan
I think you are right and there may be a problem here which I am trying to understand. The issue is as follows:
1. There are 3 places where you can set Default Valuation method
a. System Init/Company Details/Item Group Valuation method
b. In System/Setup/Stock Management/ Item Groups
c. In Item Master Data
It seem to me that b overwrites the a setting and, c ovewrites a and b
In other words one can set in Item Master Data different valuation method to any Defaults set in a or b. This does not sound quite correct to me since on should value stock consistently at whatever the Company policy may be.
The question is that once you have movement on a stock item and you want to change the valuation method, it cannot be changed (forever?). We would like to have ALL items valued at FIFO and now we have a mixture because we did not understand SAP b1
What do you think is the right solution to this issue
Your input is much valued on this topic
Thanks
Robert
PS To confuse matters ever further, I have a Stock Item that has movements (Invoice In) but it allows me to change the valuation method in the Stock Data tab. In all other items this option is grayed out.

Grouping Problem in Crystal Reports

Hi,
Looking for help on Crystal Report design, the issue is -
I have a group on Country, If I check "Keep Group Together" option, then I'll often get a page with only one short group, the rest of the page blank because a big group starts on the next page.
If I uncheck "keep Group Toghter" option, then I am getting a blank row on next new page. Even I tried by checking "Keep Together" option in "Section Expert", but no luck.
I need to print records without blank spaces in between groups.
Appreciate your help to fix the issue. Thanks in advance.
cheers
Dev

Hi,
I had similar problem.I had a Group and corresponding details and group footer.On printing the report i got blank space between two groups.I adjusted the height (Decreased) of the Group footer and it solved my problem.Once try doing the same it may solve your problem.
Regards,
Rohit Y

Logon Load Balancing / Configuring Logon Groups problem

In existing system setting:
One Logon group (PUBLIC) and point to one instances. This setting is work and SAP LOGON default clinet no is 320.
I try to install one more instances on other server and add to same Logon group (PUBLIC).
Install compent as below:
SAP ERP 2005 Support Release 2 -> SAP systems -> MS SQL, Server -> High available system -> Base on ABAP System -> Dialog System
The instance has been installed and start and stop this instance is successful.
Add instance into logon group (PUBLIC)
Logon system via logon group, the logon redirect to new instanace server. But the default client no has been changed from 320 to 001. Change client from 001 to 320 and logon. But no response from new instance server.
Any suggestion to solve this problem.
Thanks!

I found the profile in profile directory as below:
default.1.pfl
COQ_D02_BSSPI11 (New Instance)
START_D02_BSSPI11 (New Instance)
COQ_DVEBMGS02_bssco11 (existing Instance)
START_DVEBMGS02_bssco11 (existing Instance)
I strat the new instance and add to Public group and logon successful.
The problem is in transaction RZ10.
I cannot select COQ_D02_BSSPI11 and START_D02_BSSPI11 profile from Profile field.
how to fix it.
Thanks!

URGENT : Record Group Problem

hello all
i have a problem regarding record group.
i want to populate my record group with a dynamic clause which is
"and main_code not in ('02725','02868')"
and my record group query is
"select mt.main_number from main_table mt,main_parent mp
where mt.main_code = mp.main_code
and mt.main_code not in (:parameter.param_main_code)"
now i am adopting the following method for populating the
LOV(list of values) which is attached to a text item:
assigning values i.e. '02725','02868' to my parameter object i.e. :parameter.param_main_code but the record group is not giving changd results according to my criteria i.e.'02725','02868'...
does any body knows the solution for this problem..kindly help him with it..logically the record group query should work and return a changed results for the LOV..
please help me with this.....
thank you.

I thing you can't able to do what you are trying to do, but you can achive this by using dynamic record group.
Create the dynamic record as same struncture of design time then populate it by the coding.
Sample Code is
declare
     l_rec_name RecordGroup;
     l_rec_col GroupColumn;
     l_rec_col1 GroupColumn;
     cursor l_ename is select ename from emp;
     l_row number(12):= 1;
begin
     l_rec_name := create_group('rg_dynamic',Form_scope, 100);
     l_rec_col := add_group_column(l_rec_name,'ENAME',char_column,30);
     l_rec_col1 := add_group_column(l_rec_name,'EMPNO',number_column,6);
     for i in l_ename
     loop
          add_group_row(l_rec_name, end_of_group);
set_group_char_cell(l_rec_col,l_row, i.ename);
set_group_number_cell(l_rec_col1,l_row, l_row);
l_row := l_row+1;
     end loop;
     :parameter.num_rows := l_row -1;
     set_lov_property('LOV5',group_name,'RG_DYNAMIC');
end;
I hope this will help you to solve this problem.
[email protected]

[sloved] groups problem

Similar Messages

Maybe you are looking for