Logon Load Balancing / Configuring Logon Groups problem

In existing system setting:
One Logon group (PUBLIC) and point to one instances. This setting is work and SAP LOGON default clinet no is 320.
I try to install one more instances on other server and add to same Logon group (PUBLIC).
Install compent as below:
SAP ERP 2005 Support Release 2 -> SAP systems -> MS SQL, Server -> High available system -> Base on ABAP System -> Dialog System
The instance has been installed and start and stop this instance is successful.
Add instance into logon group (PUBLIC)
Logon system via logon group, the logon redirect to new instanace server. But the default client no has been changed from 320 to 001. Change client from 001 to 320 and logon. But no response from new instance server.
Any suggestion to solve this problem.
Thanks!

I found the profile in profile directory as below:
default.1.pfl
COQ_D02_BSSPI11 (New Instance)
START_D02_BSSPI11 (New Instance)
COQ_DVEBMGS02_bssco11 (existing Instance)
START_DVEBMGS02_bssco11 (existing Instance)
I strat the new instance and add to Public group and logon successful.
The problem is in transaction RZ10.
I cannot select COQ_D02_BSSPI11 and START_D02_BSSPI11 profile from Profile field.
how to fix it.
Thanks!

Similar Messages

Error while configuring logon load balancing

Hi,
I am trring to configure logon load balancing in cluster environment.
I had created the logon group using T-Code SMLG and assigned the message server to logon group.
I am using SAP GUI 720.
In the front end system, i had added the host file entry as well as added u201Csapma<SID> 3600/tcpu201D as my CI instance number is 00.
I had created u201Csapmsg.iniu201D and put the entries as below based on sapnote 38119
Message Server
System ID 1>=<Name or IP address of message server 1>
Ex: <SID>=x.x.x.x
     <SID>=x.x.x.x
Message Server Description
<System ID 1>=<Description of message server 1>
Ex: <SID>=CI
But while selecting u201CGroup/Server Selectionu201D I am getting error   u201CError: partner x.x.x.x:sapms<SID> not reached u201C.
On the logon pad I had given the following information:
Description: PRD
System ID: <SID>
Message Server: IP address of CI package
I am not able to find the exact reason of the error and how to proceed to resolve the error.
Regards
Dusmanta

> In the front end system, i had added the host file entry as well as added u201Csapma<SID> 3600/tcpu201D as my CI instance number is 00.
> But while selecting u201CGroup/Server Selectionu201D I am getting error   u201CError: partner x.x.x.x:sapms<SID> not reached u201C.
> On the logon pad I had given the following information:
> Description: PRD
> System ID: <SID>
Did you enter sapma<SID> or sapms<SID> to the services file on the Windows machine?
Markus

Logon Load Balancing error

Hi
I am trying to setup Logon Load Balancing for our ERP system, I have setup the logon groups in TX SMLG, the landscape consists of DB server app1 and app2, I have created a logon group for app1 and logon group for app2, I have then created a new system entry in the SAP Logon Pad under Group/Server Selection, here I have a problem in that when I enter the message server I get a message saying Error: hostname <message server> unknown, however when I enter the ip address for the message server I get the list of logon groups appear, however, I have entered the sapmsS02 3600/tcp setting within the services file, I have also added the ipaddress and the hostname of the message server into the hosts file, but I still cannot get the hostname to work within the message server. When I test the logon I get the error message Logon Balancing Error 88: Cannot connect to message server (rc=9), I have searched the net and most people just suggest entering the details into the services file and host file, also a sap note which suggests issues within the registry for Microsft MSN which I have checked and still have the same issue.
Does anyone have anymore ideas as to what this could be or what to try next?
Thanks for your help
Jay

Dear Jay,
It is not the service that can not be resolved, that is translated into an IP address, but the hostname. It depends on your system and the way in which it does hostname resolution, whether the hosts file will be used at all. So please check with the keyword 'hostname resolution' on how to set this up on your landscape.
Best Regards,
Tim

Logon load balance in EDMS

Hi Experts,
We configured Easy document management system (EDMS). We are able to login into the system. But we have three dialogue instances and one application instance. We need to configure logon load balance in EDMS. we already configured logon load balance in our message server. Please help me which connection parameter we need to select and what is the value we have to provide in EDMS.
Please help me this is very urgent.
Regards,
Patan Thavaheer

Dear Experts,
Problem resolved.
Thanks&Regards,
Patan Thavaheer.

LOGON LOAD BALANCING WITH THIRD PARTY LOAD BALANCERS

Hello Everybody,
We would like to implement third party Application Load Balancers for all our Applications including SAP Landscape (HTTP and SAP LOGON).
Could you please indicate which third party load balancers are compatibles with SAP LOGON GROUP LOAD BALANCING ?
Thanks for your help.
Mauricio Cardozo.

Hello Mayank,
how we we can maintain the logon load balancing for http requests
Use the SAP webdispatcher (and logon groups on services) for that ....
http://help.sap.com/saphelp_nw04/helpdata/en/5f/7a343cd46acc68e10000000a114084/content.htm
Regards
Stefan

Problem in Hyperion FDM Load Balance Configuration...

hi all,
I installed hyperion essbase, planning, Hfm and Fdqm 11.1.1.3 version.
but i am getting error at configuration of fdm load balance configuration....
error: when i click on Test Connection in authentication Providers(Shared services(CSS))..am getting error as Cannot create ActiveX Component
Please give me reply if u know about this Issue.
regards,
Mady

This error indicates that the COMJNIBRIDGE dcom object is not able to launch successfully or has not been registered properly on the FDM application server:
a) Start > Run > DCOMCNFG
b) Expand Component Services > Computers > My Computer > DCOM CONFIG
c) Locate the COMJNIBRIDGE object, right-click and choose "properties"
d) Click on the identity tab and choose "This user" and browse for the FDM Service account and enter/confirm the password
e) Re-test

Load balancing algorithm for groups in RZ12

Hello,
I would like to know the load balancing algorithm for groups defined in RZ12.
I know that log on groups for external connections are administered via SMLG and table RZLLICLASS.
I also know that RFC resources can be managed for RFC logon groups via RZ12.
Kind regards,
Peter
<removed_by_moderator>
Point awarding is at your discretion, but read and follow the "Rules of Engagement"
Edited by: Juan Reyes on Dec 3, 2010 10:21 AM

Hello!
Found this post while searching information about RFC and Logon Groups...
I have some mess in my head with SMLG functionality and RZ12. As I know SMLG we can use to distribute users to application server instances, it gives us good achievement in performance. With RZ12 we can distribute RFC connection of particular job for parallel execution on predefined application server. With SMQS and SMQR transaction we can set "Name of AS Group" to route RFC-execution on certain server or servers. But I have troubles with understanding. Imagine, we set up group 1 with 2 servers (name it RFC_GR1), and group 2 with another 2 servers (name it RFC_GR2). How could qRFC scheduler decide on which RFC server group (RFC_GR1 or RFC_GR2) distribute RFC-execution? How to interact "Name of AS Group" with RFC groups if we can set only one group? How could we distribute RFC-execution depending on our logon groups (smlg)? We would like to distribute RFC depending on SAP logon groups. Is it possible? Or do I compare apple and orange?
Regards,
Artem Ivashkin

FDM Load balancer Configuration issue

We are doing the installation for Hyperion Planning, ODI and DRM on DEV environment
The EPM version we are using - 11.1.2.2
Server 1 (Windows 2008 x64)
Foundation Services
Calculation Manager
Planning Web Application
Analytical Provider Services
Essbase Administration Services web application
Oracle HTTP Server
Server 2 (Windows 2008 x64)
R & A Framework Services
R & A Framework Web Application
Financial Reporting Web Application
Web analysis Web Application
Server 3 (Windows 2008 x64)
FDM
EPMA
ODI
DRM
Essbase Integration Services
Essbase Studio
IIS 7.x
Server 4 (Windows 2008 x64)
Essbase Server
Server 5(Windows 2008 x64)
SQL Server 2008
All our services are running fine for Planning. We are in process of configuring FDM.
FDM Application Server Configuration is completed.
While doing FDM Load Balancer Configuration, we also able to connect to Shared Service directory successfully. But when we click ok to complete the configuration it gives following error -
Unable to Create Load Balancer Object!
Please verify that the user name, password, and domain are correct
Error=Cannot create ActiveX component
When checked in Event Log we found -
Unable to create Load Balance Manager object! Configuration directory could not be located. Error=-2147023878 - Retrieving the COM class factory for component with CLSID *{E652643D-6CC1-48AC-915D-01842B04F292}*
Source=TaskManagerService - at TaskManagerService.TaskItem.fGetConfigFolder()
We tried the below steps but issue still persists -
•     Start the ‘dcomcnfg’ tool in Windows
•     Expand Component Services\Computers\My Computer\Dcom-Config and locate the following object: {E652643D-6CC1-48AC-915D-01842B04F292}
•     Right-click and choose "Properties" and click on the "Security" tab
•     Click the "Edit" button and remove all users except the default: "Everyone" and "System" and click OK, then set the radio button to "Use Default"
•     Click the "Edit" button under Access Permissions and remove all users/groups except the default items and click OK, and set the radio button to "Use Default"
•     Now click the "Identity" tab and remove the ID in the "This User" field and set the radio button to "The Launching User" and click "Apply" and "OK"
•     Now try to launch the FDM Load Balance Config and all the extra tools for FDqM
We are using hypadmin as domain account but it is part of Administrators group on FDM Server (Server 3). The administrators group is also part of -
Act as part of the operating system
Bypass traverse checking
Log on as a batch job
Log on as a service
Please let us know in case if you encountered similar error on this version and possible solution for the issue.
Thanks in advance.
Regards,

I woudl clear out all users/groups on the security tab of the FDM Load Balance Server DCOm object for "Launch and Activation" and "Access" permisisons and then set the identity to the "Launching User" radio button and apply. Then re-set the config.
If that still fails, try rebooting the server and then set it.
Make sure the domain and password are also correct that is being entered.

Hardware Load Balancing Configuration and Session Clustering

          I would like to know where I can find any information on Hardware Load Balancing
          Configuration in order to leverage WLS HTTPSession clustering.
          Don Ferguson mentioned white papers on this subject however I can't seem to locate
          them.
          I am particularly interested in Cisco's 11000 Content Service Switch.
          Thanks.
          Mike Jones


Scroll to the bottom of this link. It discusses how to configure Alteon and Big-IP.
          The principles should apply to Cisco as well, but we don't have documentation on
          configuring it, as far as I know.
          http://e-docs.bea.com/wls/docs61/cluster/index.html
          -Don
          Michael Jones wrote:
          > I would like to know where I can find any information on Hardware Load Balancing
          > Configuration in order to leverage WLS HTTPSession clustering.
          > Don Ferguson mentioned white papers on this subject however I can't seem to locate
          > them.
          > I am particularly interested in Cisco's 11000 Content Service Switch.
          >
          > Thanks.
          >
          > Mike Jones

Logon load balancing issue

Hello Experts,
We are having an issue with our load balancing.
We have 4 app servers ,2 for batch and 2 for dialog.
Dialog are used by SICF service for user to login. But the load is goign to the batch servers as well.Batch servers are running with different logon group and dialog( sicf) with another logon group.
The load is distributed by Webdispatcher to these servers.
Can you please provide some hint whe the load is going to another servers which are not meant to handle dialog requests.
Regards
Ajay Sandal

Hi Ajay,
I suspect your dialog request would be distributing from web-dispatcher.
Web-dispatcher just performs its own function, it would not see if you have configured two as a dialog server and two for batch jobs.
In case WD sees available diag WPs, on any of these servers, it will distribute the request to available ones.
If you want to check the same, then deactivate batch job servers from WD.
For batch job load balancing, I would suggest you to use logon group for batch jobs.
To do the same call transaction SM61 -> Job-servergruppen -> create a logon group and assign batch servers.
In turn to distribute batch jobs, you would need to configure batch servers (created in SM61) while scheduling batch job.
Let me know if this helps, or your observation so that we could provide some more input on this issue.
Cheers !!!
Ashish

Logon Load Balancing

Hello,
I have installed PI 7.1 on Oracle with an additional application server instance (DI).
In Central Instance I have created two logon groups and in my services file i have added "sapms<SID> 3640/tcp and sapms<SID> 3642/tcp" of the following Directory "C:\WINDOWS\system32\drivers\etc". Now I am able to see the created groups in my Logon Pad. i have added CI as PIP1 and DI as PIP2 in my logon pad and can login to the respective server.
Could you please guide if this is sufficient for load balancing.
I have another situation: Using the logon pad, i will try to login into the Dialog Instance (PIP2). If PIP2 is down, will it direct me to login into Central instance(PIP1)? If not, how to achieve this.
Thanks,
Subbu

Hello Mark,
Why did you use a different system number for the second application server?
My CI number is 40 and my dialog instance number is 42..do i need to change anything whih i have placed in Services file.
Mark, i have stopped the DI and i tried logging into the logon group for DI but it has not directed me to login into CI but inturn has thrown me an error that DI is down.
Please suggest me to achieve the above condition.
Thanks,
Subbu

Logon load balance

Hi,
We have 2 application server at Production environment . When the users try to login and run some loads which is not distributing on bothe systems. Application server shows more memory/cpu utilizations ( where central instance sits) another server could not show more utilization.
Also when we run jon on second app server , job gets fails.
Did any body have solution.
- Kristene

Hi Kristene!
We too see uneven distribution of workload (CI with 8 CPUs + 2 Application Servers with 4 CPUs each), because the load balancing only uses a snapshot of the situation at logon time to decide which server the new user is routed to.
After that, no more load balancing is done. I.e. no move of sessions to idle servers or so... When you happen to get an uneven distribution of "heavy user logons" they can generate a very uneven distribution of server load.
This is not very satisfying. I 'm looking forward to the comments and tips of the gurus.
Kind regards, Rudi

Office Web Apps Load Balancing Configuration Issue for SharePoint 2013

I have load balanced servers dedicated for Office Web Apps with name “md1xxxwfe1” and “md1xxxwfe2”
, both this servers are load balanced by CISCO Load balancer. And I have mapped Load Balancer Virutal IP with host name officeapps.jda.corp.local in the DNS records.
Things are working fine if I add new farm by using New-OfficeWebAppsFarm
with server name as internalurl in PowerShell console
as like “ -internalurl http://
md1xxxwfe1 but when I use –internalurl officeapps.jda.corp.local it is not working at all. I’m not getting what to do at this point.
I have gone through following blogs but no luck.
http://blogs.technet.com/b/meamcs/archive/2013/03/27/office-web-apps-2013-multi-servers-nlb-installation-and-deployment-for-sharepoint-2013-step-by-step-guide.aspx
http://blogs.technet.com/b/office_resource_kit/archive/2012/09/11/introducing-office-web-apps-server.aspx
http://davidlimsharepoint.blogspot.in/2013/02/installing-and-configuring-office-web.html
http://sps2013.blogspot.in/2013/09/office-web-apps-with-sharepoint-2013.html
The output of the wfe1 server is attached with this. When I open http:// /hosting/discovery in wfe1 I’m getting following result (attached
screenshot) but it should show hostname rather than server name.
Please help me
Thanks, Ram Ch

Hi Ram ,
For troubleshooting your issue, please take steps as below:
Just about any load balancing solution will work, including a server that runs the Web Server (IIS) role running Application Request Routing (ARR):Install
Application Request Routing
Install the certificate on the load balancer as described under Securing Office Web Apps Server communications by using
HTTPS.
Make sure you have configured the cluster correctly for full internet name:
Reference:
http://technet.microsoft.com/en-us/library/jj219435.aspx#loadbalancer
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

ACE Load Balancing Configuration For NATed User Traffic

Hello,
I am currently working on a requirement where the shared application services will be hosted in DC and these services will be accessed by multiple (thousands) users from different corporates/customers. The user traffic will be hidden behind customer's proxy servers or firewalls so the load balancer (ACE modules) services hosted in DC will not be able to see requests coming in from induvidual users IP addresses.
In this scenario what are options of load balancing are available in Lyer3/4 and Layer7 ?
Thanks in advance for your help.
Sanjay

Hi Sanjay,
In a set up where all users are coming from behind a proxy, all users will be loadbalanced to same server thus overloading it. This is when you are doing standard L3/L4 LB.
In the situation of proxies, for HTTP applications you shall use L7 LB and use information(cookie) in HTTP client request or server response. The ace will use this information to stick the user to same server for persistence. If a client comes with no cookie it will be loadbalanced according to the predictor method configured. Below is the link for L7 configuration example and other TS steps you can take while configuring L7 policies on ACE. For more informatin i would suggest reading ACE user guide too.
http://docwiki.cisco.com/wiki/Cisco_Application_Control_Engine_(ACE)_Troubleshooting_Guide_-_Troubleshooting_Layer_7_Load_Balancing
If you have any questions please feel free to ask.
Regards,
Kanwal

Load balance configuration for clustering

we are going to setup multiple servers (clustering) for the BIEE. What configuration needs to be done to make them clustering? And, what is the load balancing alogrithmn behind? Pls help. thks.

Which articles & documentation have you read already? I don't want to duplicate what they've covered.
http://catb.org/~esr/faqs/smart-questions.html#beprecise

Logon Load Balancing / Configuring Logon Groups problem

Similar Messages

Maybe you are looking for