Slow moving report

i am working on slow/nonmoving items and using mc46 report. i use this report to check last consumption date and when i check with mb51. it does not match.
kindly suggest correct or other way
regards

Hi,
This is a report to check the material is not moved the certain period for consumption ,
If u give the 360 days in consumption field , then you run the system search and give material is not moved from store to consumtption for one year.
But its not match the MB51, it is only for material documents.
Regards,
Andra

Similar Messages

Sample code for slow moving material report?

Hi all,
I have a requirement to display slow moving mateial report on a particular goods issue date and material wise.
The basic requirements are
1. Movement type '261' and material, plant are select-options.
2.last goods movement date based on parameter.
3. Display the quantity available
but here i am getting a problem that i couldn't find the last goods movement for that particular material with specific storage location as one material document containing more than one item. So please help? Also what logic i have to use to display quantity available?
Please specify the sample code or logic for above requirement?
Any custom slow moving report codes also very helpful?
Thanks,
Vamshi

>
VAMSHI KRISHNA wrote:
> Solved.
....Shaved.

Slow Moving Materials with qty

Dear Experts,
Is there any report to see the slow moving Materials with stock qty ?
Regards,
Manish Jain

Please check this answered link:
Slow Moving Report
slow moving report
Edited by: Afshad Irani on May 19, 2010 10:38 AM

IC_C03- Slow Moving

HI Experts,
I need to genrate slow moving report based on movement type--
Like Last usage date - this would be calculated based on the date of last movement type.
and i would like to know where the Quantity on hand will be derived from this Infocube.
Thanks In advance
Reg
Rakesh

Hi Kumar,
Please look into Business content queries for IC_C03.
bhaskar..

Report for slow moving material.

Hi friends
I want to create report for slow & fast moving materials..
I have to add following fields in the report
Material, Unit of Measure, Current Stock, Value, Last consumption date, Last movement date...
Now I dont have all these fields toghether in any of the datasources..
What I need to do? Should I create new Datasource with all these fileds..
Has anyone done this kind of report before?
Please suggest..
Regards
Swati

Hello,
For slow moving materials , use can use InfoSet to design the same.The infoset will have 0Material on the left hand side and the DSO which holds the transcation data.
or
u can install the standard content 'slow moving material' query and multiprovider 0ic_mc01.
You can get some help from there.
or
try searching in forums with the messgae "slow moving items".you will get useful info.
Regards,
Dhanya

Report on Slow-moving item in sap MM

Dear All,
I am facing problem in preparing functional specification for a Z report.The requirement details are given below
MC46 gives me a list of all items that have not got consumed since the last period (defined in terms of 'no of days' on the screen before executing the report) This report give a list of items that have shown nil consumption in the defined period. This list helps us analyze and categorize these items as Slow-moving or Non-Moving items. The output is in terms of Part no and Part Description.
Example; Suppose we are executing the transaction on say 29.10.2013.The system ,say give list of materials X1,X2 and X3 with nil consumption in the defined. The transactions suppose is again executed
on 29.10.2011.The report say again give a list of materials X1 and X3 with nil consumption. The material
X2 is excluded from the report as it might have been consumed in certain business processes(either issued to cost center or issued to production).
The client wants a report from where it is possible to determine a list of materials along with consumption
and the date on which the material have moved out of stock for consumption. In otherworldu2019s we can say the report should give :
                    stock on starting date(say 29.10.2013)
                    Consumption/movement in terms of date and quantity
The problem is that when the transaction MC46 is run the next time(say on 29.11.2013 or any day after
29.10.2013) there might be materials which might have got consumed in the interim period and therefore have got excluded from the latest list. We need to have a look at these interim materials to analyze their movement/consumption.MC 46 Report does not give details of openinf stock, closing stock and the purpose for which the stock have moved out of stock
The client wants a Z-Report which will give details about the material which have moved out of stock when the report will be executed ,opening stock,closing stock.The detail requirement are given below
The report will assist the client to get a list   of all such items with reference to a starting date and their movement in the period (period from the starting date to the run date)
Selection Screen(Input)
Opening Date
Closing date
Movement type
Plant
Output
Material nos(Material which have moved out of stock when the program was last executed)
Movement type
Movement date
opening stock qty
opening stock value
closing stock qty
closing stock value
I request if any one can help in preparing functional specifications.

thanx for reply ,
but plez read the requirement above mention.i understood what are you saying .

Report on slow-moving items

Hello gurus,
I would like to creat a report on slow-moving items in LIS, similar to report RMCBLH30 (TAC MC46).
But in 'my' report I would like to see only those slow-moving items in stock. RMCBLH30 unfortunatelly gives my all slow-moving items, even those with quantity = 0.
Could someone please give me a hint on how to do this? Are there any good tutorials in building LIS-reports?
Thanks in advance
Alicia

Hi,
Please check the last date when any of your stock movement had an accounting impact like GR, GI etc and see whether the data tallies
In MC46 try for double line display tab. It shows last movement date.
Also, check for Detailed Display for each material. It will show the details based on which it is picking last movement date and No movement since days.
From this details you can make out the date which it is taking as last movement......
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock
If you want to generate a Z-report please take the help of technical consultant...
regards,
Patil

Slow moving items report for project stock

Hi ALL,
We are using project stock to manage all of our inventory. As the standard slow moving items report (MC46) does not contain project stock (special stock Q), we would like to develop a report then. "Slow moving" should be identified by material, plant, storage location and WBS.
Has any had this experience? What's the main data logic for this report?
Thanks a lot!!

Dear,
Do One thing.. First goto MB5B - stocks on posting date and select to display only special stock indicator Q (Project). By this you can abstract all Project materials. Save the output into Excel. (The main aim is first abstract the project stock materials into a list with a suitable transactions - MB5B or MB52).
Then run MC50 or MC46 using these materials saved in excel file.
Try this.
Regards,
Syed Hussain.

Slow Moving Stock Report

Hi All,
May i know the T-Code to list Slow Moving, Fast Moving materials & also for ageing of materials.
Regards
Rang

Hi Rang,
MC50 looks at the stock level for a material over a period of time and
identifies the lowest level that the material reached. That lowest level is
the dead stock quantity as, in theory, that stock was not required. It
works on the principle that in an ideal world scenario you would maintain
zero stock sitting in the warehouse because you were able to plan such that
every day you receive / produce the exact amount that you require to meet
all customer requirements with no surplus. An example would be that if you
met all demand over a 3 month period and the stock level in that time never
dropped below 500 then that would be the dead stock level as throughout the
period you supposedly could have had 500 less stock and still met all
requirements.
MC46 simply counts the number of days since the last issue against each
material - the more days the slower moving the stock.
Both the reports have value in that they can highlight problems which need
addressing - such as excessive stock or unpopular lines - but the results
they provide do need to be considered with a degree of caution...
Top-of-head examples could be that zero dead stock in MC50 is not an
achievable target if there is daily demand and the warehouse works on a FIFO
basis with a 2 day minimum to receive and then pick, and in MC46 materials
that are very seasonal will obviously show unfavourably at other times of
the year.
Hope its useful
reward points if deserved
Cheers!!!
Twinkle

Slow moving items report

hey
there is a standard query for Slow moving items based on 0IC_MC01. I need to find out the last goods issue and last goods receipt date on this query.
Any one has any ideas ?
thanks
Laura.

Hi Laura
There is a standard query for slow moving items based Multi Provider 0IC_MC01
and query is : Query 0IC_MC01_Q0001 is available as of 3.0B (role: SAP_BW_0ROLE_0003).
But if you get some msg: Redesign Slow Moving Inventory
then do this following
Please change the definition of the MultiProvider 0IC_MC01 and the underlying Query 0IC_MC01_Q0001. These changes are included with SAP BW
1. Administrator Workbench
   -> Change definition of 0IC_MC01
      -> Activate navigational attributes
         0MATERIAL__0DIVISION
         0MATERIAL__0MATL_CAT
         0MATERIAL__0MATL_GROUP
         0MATERIAL__0MATL_TYPE
      -> Identification
         mark ALL displayed characteristics/navigational attributes
    -> Save, check and activate 0IC_MC01
2. BeX Analyzer
   -> Change definition of 0IC_MC01_Q0001
      -> remove characteristic 0CALMONTH (free characteristics)
      -> add characterstics 0MATL_GROUP (rows) and restrict it to
         variable 0S_MATG
      -> remove calculated key figure 0IC_MC01_CK0003 (columns)
      -> add new selection "All materials" accordingly to
         example "All customers" (columns)
         - use InfoProvider 0MATERIAL instead of 0CUSTOMER
         - supress this structural element in the properties
      -> add key figures 0ISSVS_VAL and 0RECVS_VAL (columns)
   -> Save, check and activate 0IC_MC01_Q0001
The selection "All materials" provides all material numbers that are
stored in BW. So you can identify materials that have had no movements
within in the selected period. These materials show no values in key
figures 0ISSVS_VAL and 0RECVS_VAL.
For information purposes you can also add other key figures.
You can also add other characteristics in the drill down for grouping
purposes, like e.g. 0DIVISION.
If you want to have similar reports with 0PLANT you can also create
a similar MultiProvider/Query with 0MAT_PLANT instead of 0MATERIAL.
Hope you got some idea and help
Atul

Dead stock or slow moving items reports

tell me any standard report t.code for dead stock or slow moving item..?
actually in our system mc50 is not working...in selection field it pick only one material ..not by material group so how i can get the dead stock report?
Regards
Rekha sharma

pls tell me the input selection field for mc46...
scope of ranking list
no. of days up to last consumption from--to--
actually i fill up 180 days for perios last consumption ...in period to analyze selection field.
regards
Rekha sharma

Report of slow moving item

Hi friends
Is ther any report to see slow moving items with quantity and value.
Regards,
Mahesh.
Edited by: Csaba Szommer on Dec 19, 2011 8:30 AM

hi.
Stock     MC.9 / MC.1 / MC.L
Receipts/Issues     MC.A / MC.2 / MC.M
Inventory Turn-Over     MC.B / MC44 / MC.3 / MC.N
Range of Coverage of Inventory by Days supply/Usage/Requirements     MC.C / MC42 / MC43 / MC.4
Requirementbased ABC Analysis     MC41
Total Analysis of ABC     MC40
Current Stock     MC48
Average Stock value     MC49
Dead Stock     MC50
Slow Moving Items     MC46
*in this you can give your plant and press f8 then one screen will appered in that select the doubleline-option then you get the value for that material*
in detail-display you can see tha qty by selecting the option of stock overview.
Consumption Vs Usage Values     MC45
Requirements Values     MC47
Batch Analysis     MCBR
Thanking you

BW Slow moving item report in MC46 (R3) Format

Dear Guys,
Regards.We got a requirement :
1) A Slow moving Item report in BW in MC46 Report format(R3).Especially the client wants the "Period:Last Consumption(Days)" in the input selection criteria.The Standard BW Slow Moving item report has only Mat.Grp in the input selection and Caldays(Period from-to) in the Filter.Would appreciate your timely help on this...
Manythanks
Arun

Hi Ramesh/Prasad,
Many thanks for your replies..Well i dont want the input selection for "CALDAY" but rather for "DAYS-----Like user input as 100Days,60Days...."...They want to get the display of "Slow moving materials" for the Last 100 days or so...Any take on this?
Manythanks
Arun

Slow moving item report-BW

Hi guys,
Regards.We got a requirement:
1).The user inputs the "No. of Days since consumed" and the Customer exit code would calculate the "Result Variable from Current Date" and populate "SLOWMOVDATE".
2).We want the Stockvalue against that "SLOWMOVDATE".
But the system calculates the "SLOWMOVDATE" but am unable to get the stock value against that Particular date..Guys any idea on how i can go about it??(Its a Slow Moving Item report in BW)
Manythanks
Arun

I suppose the stock value is restricted KF i.e. it is restricted by "SLOWMOVDATE' or you have set a global filter in the query on "SLOWMOVDATE".

Report on Dead stock and Slow moving stock

Hi ,
On of my cleints requirement is to see the list of Dead stock and slow moving stock
I tried T.COde Mc50 and MC46 but I could not understand the report fully
In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
How does system identify an item as dead stock.
Is there any setting to define an item as dead stock before running report MC50?
In case of slow moving stock ,i want to see all the material for which no posting
happened for 60 days.In this case what value I need to select in T.Code MC46
Thx in advance
Deva

Hi,
While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
And execute with the other selection parameters.
Regards,
DilliB

Slow moving report

Similar Messages

Maybe you are looking for