Slow Uplaod Speed

Download speeds are great but my upload speed is really slow. I am on a DSL connection through AT&T on my MacBook Pro. My upload rate is like 25 kb/sec.

kb/sec, or kB/sec?
kb = kilobit.
kB = kilobyte.
25 kb is half normal dialup speeds.
25 kB is 200 kilobit. Most DSL connections have at 384 kilobit upload speeds, though some if they are more than 2 miles from the central office, or are shared with other people in the neighborhood can go slower. The difference, is the DSL provider calls it RaDSL, not dedicated ADSL.
non-Apple routers, shared computers in the same household, web browsers running simultaneously, dashboard widgets can all contribute to slowing down your upload speed.
If you are uploading to anything other than an AT&T hosted server space, you will see slowing down if you have routing problems to the place hosting your file. You can use the Network utility to traceroute your hosting server's domain name (that's the name without the http:// before and anything after and including the first slash) to see if there are any hops with asterisks in between.
Finally, ASCII based uploads of binary files are unreliable at best, and you should use binary transfer if it is anything other than a plain unformatted text file. Boldface, italics, font size changes are formatting that will slow such transfers down, unless it is strict HTML.
Message was edited by: a brody

Similar Messages

WRT310N Playstation 3 Slow Download speed and general lag

Hey guys, I just recently bought the WRT310N and got both of my computers working with it. One is wired directly into the router, while the other is running off wireless. My Playstation 3 is able to connect to the router but I am getting an extremely slow connection speed.
Right now, both PC's get about 6.4-6.5 Mbps download speed while my Playstation is anywhere from 600 Kbs to 1.2 Mbps. I have plugged in my Playstation 3 directly into the modem and got a speed of 3.2 Mbps and was downloaded a demo very fast, but I do not recieve anywhere near those results when using it wireless.
Any advice? I have tried opening the ports, but that only seemed to slow it down. A couple of days ago I opened the ports specific to the game NHL 10 and for two days I was getting such a good speed in the game that it felt like I was playing offline, which was great! Then this morning, it just seemed do a complete 180. Now when I play the game I get an extreme amount of lag, and my other games like CoD4 get random lag spikes. Like, I'll be running and I get a lag spike which seems to happen fairly consistently every minute or so.
Any advice? Should I try opening the ports again or what?
Message Edited by Nimer on 10-02-2009 03:58 PM

I think you need to adjust the wireless settings of your Router, The wireless settings on your Router must have been setup to its default that's the reason you are receiving low signal strength on your PS3.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

From the old forum.... Slow broadband speeds in th...

FROM THE OLD FORUM Original post by John Jorgensen...
Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 9:17 AM
Click to report abuse...        Click to reply to this thread    Reply
Hi,
I have had bt broadband opt3 for almost 3 months now and have always had a healthy 9mb+ connection, however have noticed it being very slow in the evening when I come home from work, I checked the speed last nite as iplayer was constantly freezing and was getting 1mb . A bit upset by this as I got bt broadband to play my ps3 online and to get faster speeds on my laptop, and I use these services mostly at nite.
I checked my speed this morning and was getting 11mb, is this normal or am I being capped I cant believe Id be going over my download limit. Can someone from bt get back to me on this?
Thanks
John
alison griffiths
Posts: 54
Registered: 11/3/09
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 11:22 AM   in response to: John Jorgensen in response to: John Jorgensen
Click to report abuse...        Click to reply to this thread    Reply
Welcome to the world of BT , the tv advert when he says " business slow" when trying to load a webpage is not other companies thats BT.
John Jorgensen
Posts: 2
Registered: 9/2/09
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 12:11 PM   in response to: alison griffiths in response to: alison griffiths
Click to report abuse...        Click to reply to this thread    Reply
Yes Alison, I think I can see that now. I wouldnt mind if broadband was a bit slower at peak times, I know thats normal, but when I'm only getting 1mb when my max is 14mb, I just dont feel I'm getting what I pay for. And when it gets to the point where I cant watch iplayer without it stuttering everywhere and online games lagging on the ps3, this is certainly not what I'm paying for.
I was hoping one of the mods here would help me and check my line and see if there is any cap on the line and get it removed.
I really dont wanna phone India, I deal with them 5 days a week as is...
Think I will just send one of the mods an email to check my line and see if it is being capped or if somethings wrong.
anthony dickerson
Posts: 72
Registered: 4/26/07
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 22, 2010 3:52 PM   in response to: John Jorgensen in response to: John Jorgensen
Click to report abuse...        Click to reply to this thread    Reply
You will never get decent speeds on Iplayer,
BT limit it because they want you to subscribe to their precious BT Vision service.
The only way you are guaranteed to get decent speeds on BT is to subscibe to BT Vision and also unlimited broadband.
Then you will get priority when you stream TV at your exchange unlike fighting it out with all the other broadband users as you currently are for the available bandwith.the more over subscribed your local exchange the worse it is
Paddy B Mod
Posts: 199
Registered: 10/13/08
   Slow broadband speeds in the evening all of a sudden
Posted: Jan 23, 2010 2:04 PM   in response to: anthony dickerson in response to: anthony dickerson
Click to report abuse...        Click to reply to this thread    Reply
Hi John,
I can take a look at the network side of things for you, to see if there is anything I can do to help improve your speed during peak periods. Please could you drop me an email with your BT account details? Please also include a link to this thread. It would also be very helpful if you could run a few speed tests using www.speedtester.bt.com when you feel your Broadband is running slow. I can then check those results from here.
Thanks
Paddy
BT Forum Moderator - [email protected] - if you're emailing please include a link to your thread so I can reference back to it.
Mateusz Sokolin...
Posts: 2
Registered: 10/11/08
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 24, 2010 7:33 PM   in response to: John Jorgensen in response to: John Jorgensen
Click to report abuse...        Click to reply to this thread    Reply
Well John i'll tell you what it is...
First of all welcome to BT and I hope you'll enjoy 18months of pain and suffer.
OK here it goes....
If you look at your contract, find a rule that says Fair Usage Policy.
Basically it states that BT will cap anyone that is abusing their lines.
However, it does not say what are the limits after which you are going to be capped for how long and at what times. (I'll come back to this later and explain)
If you ring 08007076044 I'm sure that someone will confirm my theory. As constant 1MBit between 6PM till 11/12 PM is actually FUP applied on to your account.
Ok time to explain my frustration about FUP.
Since I signed my contract with "lovely" BT for constant 4 months I had similar issue but it took me even longer to find out what is going on and how to deal with this problem (thanks to google).
FUP team states that if you exceed 100GB in a month (everyone will admit that these days 100GB is nothing when a single game for PS3/XBox360/PC sometimes is more than 5GB and 1080p film is about 12GB) will cap you for a month at peak times to outstanding and superfast 1Mbit (about 130-150KB/s).
I'be been watching my download and for few months never exceeded that 100GB in a month. Been ringing FUP team to verify when suddenly they told me that from (cant remember exactly) March FUP will apply only to accounts that are using Torrents and other P2P.
you won't believe how happy I was hearing that.... So i've started to download and next month guess what.... 1Mbit connection.
Really mad rang FUP team and asked them what on earth is going on. They confirmed that its only P2P and I've explained them that I only use Youtube, BBC iPlayer, Rapidshare, Steam and XBox Live, Beatport (just don't understand how ppl can use torrents and other P2P as they are just way to slow). So they were happy to take the cap off my broadband connection.
Next month same issue solved exactly the same way.
After that for consecutive few months I had no problem whatsoever until September where FUP Team said that there is no such thing and FUP applies to everyone.
So just want to say that BT is rubbish that can't keep their word.
I went to one of the sales advisor in the shopping centre and asked him how FUP works as it does not say in the contract "how, when, who and what".
So he said that policy is applied based on amount of files downloaded within that 100GB. So if I download e.g. 3x 50GB (although its 150GB altogether) files I wont be affected but 100x 1GB will put a cap on me.
I've been so curious if what he said was right and started to download 2x 60GB and guess what... Got frigging FUP placed on my account!!!.
I've got 2months left with them and will be extremely happy to cancel my contract, moreover, I will do everything in my power to sue them under EU Consumer Rights Law (that states that contract should be clear and fair to both sides) as Fair Usage Policy is one of those things that allows BT to do anything they want to their customers;
1. No clear explanation of what FUP is.
2. Does not states the amount of downloaded data required to have cap on the acount
3. Does not states for how long it will be applied
4. Does not states when it will be applied
If you look at e.g. Virgin Broadband everything is clearly written in nice and understandable way. It warns you at what times FUP will be applied under what circumstances and for how long. Isn't it what we all want to know??
Alex Owen
Posts: 3
Registered: 12/13/09
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 24, 2010 9:35 PM   in response to: Mateusz Sokolin... in response to: Mateusz Sokolin...
Click to report abuse...        Click to reply to this thread    Reply
@Mateusz I think I maybe a victim of this outragous stint BT have done. I have 2 XBOX 360's running on XBOX Live, 2 Desktop PCs connected to the web constantly, and 3 laptops, we have a torrent sharing running and World Of Warcraft on one of the PCs. All of this is shared across a 6 person family. How can a family where two members goto to college and university do their college ork, download application such as VB.net do their coursework and revise without the hassle of a **** connection. Seriously BT get your ******* head outta your **** and stop this ********, we are customers, we pay for what we are offered. When I signed up several years ago I could download everything on the net woithout infracions on my line being set in motion. You altered my contract without telling me. You will lose custom from this. Also you have ****** my wireless
Edited by: Alex Owen on Jan 24, 2010 9:36 PM
amanda jones
Posts: 33
Registered: 1/8/10
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 25, 2010 8:42 PM   in response to: Alex Owen in response to: Alex Owen
Click to report abuse...        Click to reply to this thread    Reply
You lot are lucky, We wish we could be capped to 1mbit. Our IP profile is capped to 500kbit because BT say the line isn't good enough for anything more. We are paying for option3 up to 8mbit and BT have said we must continue to pay for it for the remainder of the contract, or buy ourselves out of it early, the reason they give.... Up to 8mbit means up to 8mbit. If you dont get 8mbit then TOUGH LUCK SUCKERS!!
The outcome? We feel like we've been turned over by a dodgey second hand car salesman called BT. The internet deal he flogged us was a dog, a ringer, it wasn't cosher and certainly had a false MOT certificate.
Computer Geek
Posts: 429
Registered: 7/22/05
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 25, 2010 8:49 PM   in response to: amanda jones in response to: amanda jones
Click to report abuse...        Click to reply to this thread    Reply
Hi Amanda,
Why have you joined BT Option 3 when you can not get what BT can offer?
No pun intended but you are a bit of a sucker for paying high prices where other suppliers are cheaper and can provide what your line can support.
CG
amanda jones
Posts: 33
Registered: 1/8/10
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 26, 2010 9:13 PM   in response to: Computer Geek in response to: Computer Geek
Click to report abuse...        Click to reply to this thread    Reply
we moved house last october to this one, the connection was rubbish from the get-go, BT said the router was broken and we needed a new one, we said OK. That "OK" meant that we had entered into a new contract for option 3 same as out old one. The router wasn't broken, the new one didnt fix or improve the problem, we have since asked for a price reduction or compensation and been told "no". we are in contract and can pay to buy ourselves out of it if we like but otherwise we have to pay for option 3 and recieve fixed rate 500kb.
Clare Thurston
Posts: 4
Registered: 10/17/06
   Re: Slow broadband speeds in the evening all of a sudden
Posted: Jan 27, 2010 11:57 AM   in response to: amanda jones in response to: amanda jones
Click to report abuse...        Click to reply to this thread    Reply
Hi Amanda,
I think you'll find that the Hold To Term rules have changed. BT are now unable to charge you for the account if you no longer require it. It is against OFCOM's rulings for a company to make more money out of you as a leaving customer than an existing one. However, You will need to pay for the connection charge (if that has not expired it's original differed contract) which is £40. A cancellation fee of £25 if you are simply cancelling and not migrating using a MAC key and for any hardware. The Routers are advertised at £88 and i would suggest that if they believed on to be faulty then that would be replaced under guarantee and not be put on a differed basis. I would check exactly what they say the are charging you and query this through OFCOM. http://www.ofcom.org.uk/

Months of impecable service form BT as an option 3 customer. (I've even recommended BT to people)
but
For the past 2 weeks peak traffic has murdered my connection.
I can get 14mbit off peak, and it used to drop to about 7-9 at peak times.
Now its down to 1-2mbit at peak times. (no i haven't breached FUP as I check my btinternet inbox for the 80GB warning)
I think its resonable to experience drop off but 90%!!!
BT advertising says fast speeds at peak times. less than 2mbit is not fast. (that the governments minimum standard!!!)
I don't know how to procede because when I'm experiencing these issues if I ring up I will end up waiting so long to speak to someone (because its peak time) the concection wiill be better again.
I can think of no recourse other than to approach trading standards...
Guarnetee me 5mbit at peak times (enough to stream HD iplayer) and I'd be happy
That is what BT vision customers are in essence are getting + what ever their PC is using.
Fair usage? what about Fair Supply.

Time Capsule with an Airport Extreme bridge resulted in slow LAN speeds

Wondering if other people are seeing this. I am unsure if this was a result of upgrading both my TC and AEx to 7.6, but my LAN speeds had suffered in this configuration.
1. Comcast cable modem connected to the WAN port on my TC.
2. Connected an ethernet cat6 cable from the TC to my Airport Extreme, which was configured as a bridge.
3. My desktop was connected to the Airport Extreme.
4. When doing file transfers within the LAN or general internet usuage, my network speeds were extremely low.
5. Disconnected the cat6 cable from the TC and plugged that directly to my desktop.
6. Network speed jumps up by a factor of 5. LAN file transfers and internet usuage has returned to what I had expected.
Is there a known issue where a bridged AEx conncted to another Airport "main" device will result in all machines connected via the AEx to have slow LAN speeds?
I didn't see this issue months ago. I did less than 2 months ago upgrade our machines to the 7.6 firmware, but after experiencing some hiccups on the network, reverted back to 7.5.2. However, the slow LAN speeds haven't gone away when the two airport machines are connected to each other.
Any insight or advise is appreciated.

By now, millions of users have updated to 7.6 and I cannot recall seeing a post similar to yours on this forum.
As far as a "known issue", you would need to contact Apple regarding that.
Suggest that you have the AirPort checked out at an Apple store if you have one near you.

Very slow broadband speeds

Hello
My first post, and I'm hoping that someone will be able to help me with this.
For a few days now, I've been experiencing very slow broadband speeds (100kbps or less), in contrast to the 1.5 - 2Mbps that I would usually expect to get. I've been on hold to BT technical support for some time, and have got through twice, on both occasions being told that this is a widespread issue and to wait until the next day. However, I'm not seeing any improvement. I'm aware of the problems in Edinburgh and the North of England,but I'm in East Anglia.
speedtester.bt.com shows:
Your configured download throughput speed for this service is 135 k
and then:
Two consecutive attempts have failed to initialise an Assured Rate session for your service.Please raise a fault with your service provider stating that the Performance Tester tool indicated a problem with initialising your Assured Rate session. <script type="text/javascript">// paintProgressAndMessageTestBar(-1,""); paintProgressAndMessageOnBar(-1,'An Error has Occured! '); // </script>
My hub stats are:
ADSL line status
Connection information
Line state Connected
Connection time 1 day, 13:59:54
Downstream 1,504 Kbps
Upstream 448 Kbps
ADSL settings
VPI/VCI 0/38
Type PPPoA
Modulation ITU-T G.992.1
Latency type Interleaved
Noise margin (Down/Up) 15.0 dB / 19.0 dB
Line attenuation (Down/Up) 60.0 dB / 31.5 dB
Output power (Down/Up) 16.6 dBm / 11.9 dBm
Loss of Framing (Local) 0
Loss of Signal (Local) 0
Loss of Power (Local) 0
FEC Errors (Down/Up) 4586 / 92
CRC Errors (Down/Up) 297 / 2147480000
HEC Errors (Down/Up) nil / 72
Error Seconds (Local) 221
I hope this is enough information, but I'll happily supply anything else if I can. The uptime of 1.5 days is the time since I was advised to restart / reset to defaults etc.
Thanks for any help.
Deej.

Once a line is stable and working well, it's best left running 24/7
Interventions like resets, replacing accelerators, unplugging the router etc. will cause line "flapping"
And the dslam sees this as instability, and in turn the BRAS lowers the IP profile ....
This is done to achieve stability, and decrease throughput purposefully, all done automatically.
What you have to do, is cure any line noise, plug directly into the master or test socket behind the NTE
faceplate, leave it connected and wait for the throughput to increase.
Very often a rock bottom IP may need a kick to get it out of the doldrums.
Eventually the noise margin will decrease, sync will increase, and IP profile go up.
Depending on how long the line has suffered impulse noise, will determine the time for SNR to come down.
Regardless of which type of phone you used to test quietline ... hum or crackle is a no-no.
It may be the cause of the problems. It could be REIN on the network portion of the connection or dslam
crosstalk, either way it needs to be reported as line noise before you can count it out of the equation.

External firewire hard drive reverts to slower transfer speeds

This is the strangest hardware problem I've come across. I'm running a unibody mbp (June 2009) with an external WD 2.0TB Caviar Green drive mounted in a firewire 800 enclosure made by icydock.
Lately, I've noticed that after an unknown amount of uptime, the speed of file transfers to the WD external drive slows down dramatically. I figured this out by watching my time machine transfers take a bit longer after awhile, and I verified this using aja system test and speedutilities.
When I boot my mbp in the morning, file transfers and time machine backups to the external WD transfer at a rate of about 67-75MB/s. This is the speed the drive should always be working at since it's connected via firewire 800. Aja speedtest verifies the speed is as it should be as well.
Then, after a couple hours of using my mbp, or even later in the day, I'll transfer a file to the external WD or run a time machine backup and find that the transfer will only run at a max of 29-35MB/s. This is exactly half the speed the transfer should be going at. Subsequent transfers stay at this slower rate no matter what I do.
However, I've been able to fix this problem by unmounting and remounting the external WD or restarting my mbp. After doing either of these actions, the WD external goes back to contant transfers at 75-80Mbs. So something is happening where the longer the mbp is running, or after some sort of disk activity, the external WD reverts to a slower transfer speed (closer to FW400). I can't isolate whether it's an issue on the mac os side or the hard drive or the hard drive enclosure because I can make the hard drive go back to optimal speed again merely by unmounting and remounting it. This works consistently until a few hours later when the drive begins to handle transfers at half speed again.
I run hourly time machine backups to the drive. The time machine backups can't be the culprit because the drive remains running at optimal speed after the backups (verified with aja system test and speed utilities)
Any possible ideas as to why the drive cuts down to half its optimal transfer rate after a bit of time? I can't figure out the cause of this, and the consistency of the drop leads me to think this is an issue with the power management on the drive since it reverts to full fw800 speed when I umount and remount the drive or restart my computer. Could this be an OSX issue where for some reason the system isn't negotiating the fastest speed?
Any help appreciated.

From the SoftRAID manual:
Fire hubs and disk drives. FireWire hubs are notorious for introducing errors and instability onto the bus.
Make sure that all of your consumer electronic devices (iSight, cameras, scanners) are connected to a separate FW bus. These devices are not built to the same standards as storage devices and known for introducing errors onto a FW bus.
Cables. While most cables work fine with a single device, many cables will introduce errors when 2 or more disks are connected to the bus.
http://www.softraid.com
http://www.softraid.com/demo.html - manual and demo
Output can be to any drive or partition. When you lauch iMovie it asks where to store your project.
I just bought a camera, and curious myself to see if I can take 10 minute clips and use iMovie/iDVD so that it will auto-play. I may end up buying Pogue's "iMovie Missing Manual" or something.
iMovie Discussions

Mac Pro slow write speed on Samsung SSD drive

Hi,
I am wondering why I get very slow write speeds on my Samsung SSD 840 Series 250 GB system startup drive in my Mac Pro (early 2008).
I get an average write speed of approx. 35 MB/s and not much more for top speed. I tested it by transfering a large file (8GB, .m4v) from my Mac Pro internal Raid 0 (4x 2TB Stripe Set) delivering up to 550 MB/s. The read speed of the SSD is around 270 MB/s which I consider to be OK for that I have just the 3 Gb/s internal SATA interfaces in my pretty outdated Mac Pro.
I don't see any Memory or CPU overruns or consuming system tasks while doing the tests and no other user programs except Activity Monitor is running. The following screen shots from the Activity Monitor should proove my findings:
Setup:
Samsung SSD 840 Series 250 GB (SATA 6Gb/s and 3Gb/s compatible) system startup drive. Free Space left on SSD is around 100GB of 250GB.
Mac Pro (early 2008, Model 3,1), 2 x 2.8 GHz Quad-Core Intel Xeon, 8 GB RAM, NVIDIA GeForce 8800 GT 512 MB.
OS X Mavericks 10.9.1
Samsung sais there should be 540 MB/s for Seq. Read and 250 MB/s for Seq. Write for their SSD drive.
Any hints what could be done to increase especially that low write speed of around 35 MB/s (average) on the SSD in my Mac Pro?

Really great 'The hatter' !!!
Thanks a lot for your exceptional support.
Next to my 4x discs in the 4 SATA II drive bays I have installed a additional OWC drive kit that allows me to have another 2 disks sitting in the empty bay below the CD/DVD drive and those are connected to the motherboard. So there is a lot to handle for that controller you mentionned ;-)
I will follow your guidance and boot from my 'maintenance' system on direct attached external drive, install the TRIM Enabler there as well and do the DU repair run. I always have a separate system available that gives me the chance to boot my Mac from there. And in addition I regularly use ONYX to keep my OS X clean and do the maintenance.
Anyway, you're the man of the day!
PS; I am looking forward to finally receive my new Mac Pro (late 2013) ordered on the 18th of December one of these days and then I hope that I can fly ;-)

Macbook pro: Extremely slow upload speed

Hi,
I know this question has beed raised many times before me, seemingly from hundreds or thousands of users, but none of the threads I have found has lead to any solution.
My new Macbook Pro (15 inch), using Lion 10.7.3, is simply unable to obtain anything but an extremely slow upload speed, when using Wifi. I am using an Apple Airpor Extreme wifi device. My work PC, my older Macbook Pro (13 inch), all tablets and telephones etc hooks up to the same Wifi device and obtain all the speed they should, but my new Macbook Pro is sloooooooooooowwwww and sometimes cannot even initiated an uload speedtest at i.a. www.speedtest.net.
As mentioned, I am aware that there are plenty of threads on this, but I am not aware of any that provides a solution.
Is there a solution or is my new Macbook nothing but crAplle?
Best regards,
n

My subscription is 10 Mbps downloadand 2 Mbps download. upload
I get that (10/2 Mbps) on all other devices, other than my new Macbook Pro.
On my new Macbook pro I get 10 Mbps download, but only from 0 to 25 Kbps upload.

[SOLVED] Slow read speeds from a DroboFS mounted in fstab via cifs

I've decided to move all my media over to my drobofs which I have and I've mounted the share on the drobo in fstab this way:
//mydrobofs/Media /media/drobofs cifs iocharset=utf8,uid=af,gid=users,guest,dir_mode=0775 0 0
The share is mounted fine at boot but my issue is now the read speeds are very slow. opening a video file with vlc takes 30 seconds or more before it starts playing. Before this was accessing the share on my drobofs via the network tab (samba shares) in Dolphin (using KDE4) and here the video files played immediately in vlc (no delay). The reason why I want to mount the share via cifs and fstab is to move music collection over to the my drobofs and since I'm using Amarok for managing my collection this is the only way to make Amarok see my Music collection on the Drobofs.
Why am I getting so slow read speeds with cifs?
Last edited by fettouhi (2012-05-07 05:54:00)

I did some more testing and seems like the problem has something to do with how many video files there are in the directory. I have some directories with several 100 video files and here I get this long delay but if I play a file that is in a directory by itself or only a few other video files are there, then the video starts immediately (almost). Is there a way to turn off this behaviour in vlc? Is it generating a playlist or what?

Test bed : WLC makes slow WLAN speed vs. Autonomous

Hi experts,
User complint very slow download speed (~140kbps) compare to wire around ~50mbps. Those are too different.
So I move out from the production, then did my own test.
I tested on seperated environment, seperated AP(1130)/switch/ WLC(7.0)/PC client with Windows file sharing. Then compare againt STANDALONE AP. All are flat configure without any Auth etc.
Result are, standalone AP is winner = 5MB/sec while WLC based is only 1MB/sec. Then I also try to do LOCAL SWITCHING (H REAP) to diable tunneling that could make some delay. Result is the same, no improvement.
I also find out for cisco support forum. Much many discussions ask us to disable feature such Client exclude, MFP, Aironet IE and tune for a/b/g supported.
What else to tune or aware of ?
Please do me a suggestion. Thank you.
Nipat.p

David,
Do you mean Static&Dynamic CH? I used default WLC's setting (Dynamic, DCA)?
Anyway, my testbed is using only 1 AP in 2 scenarios WLC-based vs. Autonomous at the same location.
I also asked from the others end user who is using WLC. Windows file share speed is also around 1-2.4MB/sec. So poor!!!
Then, What else for WLC parameter should I take care of? I got a slot to re-test by tomorow.

How many thousands of Apple TV users have to scream their complaints before Apple will respond to the fury over the impossibly slow download speeds of movies bought through iTunes??????

How many thousands of Apple TV users have to scream their complaints before Apple will respond to the fury over the impossibly slow download speeds of movies bought through iTunes?

As jules says, your rate (currently at least) may be slow.
If it used to be good I wonder is your ISP is slowing ('throttling') your speed after you've used so many GB of a quota each day or month - check what they think you should be getting as a download speed.
While Apple's servers do occasionally play up, it's generally the ISP being slow not Apple.
If you're using Google's DNS servers that has caused issues for some.
Recommended speeds for near instant playback:
SD         2.5Mbps
720p      6 Mbps
1080p    8 Mbps
Is your speed test from somewhere like speedtest.net?
It might be helpful to post Mbps to ensure we/you are not confusing speeds by using different units to those measured.
AC

WRT160N SLOW CONNECTION SPEED

I have slow connect speed when using the WRT160N. I have tried every thing, done dianogstics on connection, router, modem, thru three diffeant software, norton, windows, system machinics. when ising the router some days the speed is amost like using dial up
I use XP, on both a laptop desk top, up to date drivers, both cna use wifi or direct connection by cat 5e, 3 m of ram, a wimax internet server,,,,, (company called Bridge Maxx)
But when I stop using the router and connect directly to the modem no problem works fine,,,,, not sure what to do........ just need my wifi back,,,,so i cna work,

Whats the Version number of your Router, If you have having version2 router, then there is an knows issue with Version2 Router. Downgrading to Build 8 is generally accepted to correct these issues, however Linksys have indicated to several people they do not have the build 8 firmware to give to end users.
This is ONLY for WRT160N V2 routers. This firmware will not work on WRT160N V1.
You can find it at http://audipages.com/router/
Follow the dowload and firmware downgrade instructions on that page.
Once you upgrade the firmware of your router, you need to Reset your Router and Re-Configure all the settings on it back again. Once you do the settings on your router i think this should solve your problem.

Sigh slow download speeds iPad

Is anyone having problems with slower download speeds on iPads and if so any suggestions to fix? Also some videos on my laptop, ex: like twitter mobile uploads I'm trying to view, are slow. Come to think of it, some youtube things slow to download on laptop, too, so not the sites' faults.. Is it Verizon's? Why is the download speed erratic to non-exisitent on certain videos with Fios?

The first thing that needs to be checked first is the FiOS connection. Go to http://measurementlab.net/measurement-lab-tools#tool1 and perform a speed test using a computer connected via Ethernet and see if the results match what you should be getting on your connection. Additionally on the iPad, visit testmy.net and perform their download speed test. If you have any additional PCs in the home that can use Wireless, perform a speed test over Wireless using the Measurement Lab address.
========
The first to bring me 1Gbps Fiber for $30/m wins!

Help : very slow connection speed with AEBS and iMac

I connect to the internet using my newly purchased AEBS. I have a MacBook and an 24" iMac ( purchased in Nov 2007). My iMac showed very slow connecting speed of <1 MB/s download; with my MacBook placed just 1 foot from my iMac, the MacBook showed an amazing download speed of 20MB/s. If i connect the iMac to the AEBS using ethernet cable, it can get a very high speed.
So, where is the problem??
I am new to wireless, please help. I use iMac more than my MacBook at home.
Actually, i did not touch the any of the advance setting of the AEBS.

You know, I am experiencing the same problem. My wife's PC and iPhone are blazing fast, but my MacBook is accessing the internet at about dial-up speeds. Very frustrating and I haven't yet found the culprit.
Anyone???

WRT600N slow wireless speeds

I have a WRT600N router. I have one PC that is connected to the router via a wired connection. I also have an iPad (3rd generation) that is connected to the router via a wireless connection. On my PC, I went to speedtest.net and determined that I am receiving like 20MB downloads via the wired connection. However, my iPad only gets approximately less than 2 MB download speeds. I have tried reseting the router and I do have what I believe to be the latest firmware update (Firmware Version: 1.01.36 build 4). I also receive the slow download speeds when I try connecting the other wireless devices. I assume my problem has to do with some sort of configuration setting found in the router configuration page (http://192.168.1.1/). Can anyone please advise me what to do? The router is only a few feet away from my iPad so the signal strength is strong. I just don't understand why I'm receiving such slow wireless download speeds.
Solved!
Go to Solution.

dpnowak wrote:
This suggestion did not work. I tried to isolate the problem by optimizing the router's wireless settings. I used the 2.4GHz, set the radio band to standard 20Mhz then set the standard channel to 9. The laptop had the same slow wireless speeds as the iPad did.
This may be due to the IPv6 feature on your computer. One of the solutions may be disabling IPv6. If the issue still exist after performing this step and download speed is fine when connected straight to the modem then reset reconfigure could work, just use WPA2 for the security with AES and a fixed channel for wireless.

Slow Uplaod Speed

Similar Messages

Maybe you are looking for