Slow wireless downloads on new iMac

I just picked up the new iMac and downloads are EXTREMELY slow and the router is only 10 feet away from the Mac.  Any ideas what could be wrong?

I run into the same problem when I got my new i7 imac in December 2012.
It run 10 times slower via wireless on speedtest.net vs my 3 years old macbook pro.
I soon as I plug in the network cable it runs super fast, but wireless is just beyond terrible.
I did test new iMac vs my old Macbook Pro parallerly many times, same network, same time of the day. I did reset the router, modem, wireless card, you name it,
I called apple and they first tried to repair my brand new computer?!!? They did the speed tests via phone and couldn't figure out the issue.
After an hour or so on the phone, and being transfered from one person to another they finally agreed to ship me a replacement iMac.
So now I waited 1 month for my custom ordered replacement iMac.
Now check this out....The new one just arrived today and it has the same issue?!?!
I think we need Steve back to get this straightened out. Someone help please.

Similar Messages

  • Slow wireless speed with new iMac Intel- problem with 802.11g?

    There IS a problem with the new Intel Mac, I have tried both the Intel iMac and the new Intel Mac mini and they both have the same problem with slow wireless speed (or rather it variates, if I do a ping to another computer on the network the speed goes from < 1 ms up to 1000 ms and then down to < 1 ms and so on). The older mac minis, my Linux boxes and my Windows PCs don´t have that problem. I have also read reports on the net and it appears that most users experiencing this problem have wireless card firmware version 101.3 (3.120.28.3) . A possible "fix" is to change to 802.11b on the router and then it works. No speed fluctuations and a stabile network! I know it is a bad solution, I would prefer to use 802.11g and get the speed. However I think this points to a problem with the drivers regarding 802.11g. I am starting up a new thread on this and those of you with problems, please try to switch to 802.11b and if it works let us make Apple aware of this.
    /Tobbe

    Which home hub do you have?
    There is some general help at this link    Wireless connection problems
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Why slow wireless download Macbook Pro Bootcamp Xp Leopard

    Problem: wireless download speed is much slower running windows Xp on a macbook pro (bootcamp) than when running OS X. Example OS X = 1,164 KB/sec download, 496 upload vs Xp = 265 KB/sec download, 940 KB/sec upload.
    I have a Macbook Pro Duo Core running OS X 10.5 with the newest Boot camp drivers for windows installed. Test was done using Speakeasy speed test, Safari/Explorer 7.
    funny how only the download speed is slow under Xp, not the upload speed.
    thanks for any help,
    Paul

    Here's a solution that worked for me, my chipset is a Broadcom 802.11n (4328). It's a 24" iMac (Pre Alu).
    Hopefully it helps others. Broadcom have updated WHQL drivers (picked mine up from here, they have Vista versions on there too) and it was just a case of installing those and changing 2 settings.
    Changing IBSS mode to 802.11a/b/g/n Auto:
    http://img220.imageshack.us/my.php?image=configip9.png
    Setting the Rate (802.11b/g) to 54:
    http://img411.imageshack.us/my.php?image=54gmodeei7.png
    Now my speed is on par with Leopard

  • LR 5 running extremely slow on a brand new iMac

    Hi, I just got a brand new iMac (specs will be attached on bottom) because my old pc was slowing down. I downloaded the CC LR and PS trials so I can see how the machine works, figuring it would be way faster then my old one (2009 machine, specs also on bottom). Unfortunately, LR is running much slower on my new machine and I am quite frustrated since I only bought the iMac due to performance issues with my old machine. I am hoping that it has to do with the setup and am hoping someone here can help me figure it out, or I will have to return this machine.
    I really wished that I could talk with customer service, but that seems to be not an option, which makes me quite disappointed with CC and Adobe. I have the Scott Kelby LR5 book and set preferences up the way he did, but maybe I am missing something that he is not talking about. I have used LR since version LR3 and have not had any issues with it on my other machine, besides it slowing down now that I got a camera that produces bigger files sizes than my old.
    Please let me know what other info I should supply. Thanks so much!
    old machine specs where LR5 is running much faster then on this brand new one

    HI this has been well discussed on the Macrumours forums and here too. Seems to be an Adobe thing as other similar software does not do this.
    may be down to LR not making use of the GPU  or some other reason, I'm trying to make my mind up between buying  LR 5 or buying Capture One a pro 8  Which is a fantastic piece of software which does make use of GPU.
    i Was hoping LR6 would come out soon (March 2015) but apparently that is just a rumor with no substance.
    decisions decisions!

  • Wireless speed of new iMac

    What's the maximum speed of the wireless connection of the new iMac (27") ?
    is the Mac running at 2.4Ghz or 5Ghz...
    and 20Mhz or 40Mhz?

    Welcome to Apple Discussions!
    Wireless speed is not measured in Ghz. It is measured in bps. 802.11n is typically between 100 and 200 Mbps depending on local interference. That said, any other device sharing the wireless network at the same protocol will slow it down often by a proportionate amount if it is constantly sharing the network. Any device using it on a slower protocol, will slow down the wireless network to the slower protocol. Draft 802.11n often is only 54 Mbps, and so is the 2.4 Ghz in many instances when it is non-Apple. 802.11g for instance is 33 Mbps. 802.11b is about 12 Mbps. If your wireless router is set for using both 802.11n and a slower protocol, it generally will only slow down when a slower device is connected. Note these speeds are only good for devices sharing the same router. Apple's routers also have 100Mps and Gigabit ethernet, which would decrease the shared network speed with ethernet devices accordingly. You will still see the slower speed of your internet connection still be the maximum speed for data transfer over the internet.

  • Downloading to new iMac

    Just bought a new Imac and tried downloading Creative Suite Premium but it says it will not download a Power PC. What can I do.

    here are the upgrade paths: http://www.adobe.com/products/creativesuite/upgradeinfo.html

  • After 16+ hours only 7% of Illustrator downloaded.. new iMac computer and new subscription...

    New subscription, new iMac...after 16+ hours Illustrator only 7% downloaded...is this normal?

    Please read, and reply back here with information https://forums.adobe.com/thread/1499014
    -try some steps such as changing browsers and turning off your firewall
    -also flush your browser cache so you are starting with a fresh browser
    http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip/
    http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html
    or
    A chat session where an agent may remotely look inside your computer may help
    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • Attachments not downloading on newer iMac using  Apple Mail

    I have a fairly new iMac (Dec 08) running the latest version of leopard (10.5.6). recently I have changed my mail from POP to IMAP. On the iMac, sometimes attachments will not "download". When I try and drag it to the desktop, I get an error message something like: "You can't drag this file until it is downloaded. Would you like to download now?" But if I try and manually download, nothing ever happens. Its as if the file really isn't there, just the "image" or name. However, on a powerbook connected to the same netwark, with the same email settings, (computer running 10.5.4), the files appear normal and download instantly.
    I found a discussion of this from last year, with no resolution other than to perhaps mark the message as "unread", quit mail, and restart. this worked for one of the downloads in one email, one time, but did not work again. I also tried deleting the mail envelope index, to no avail.
    (link: http://discussions.apple.com/thread.jspa?messageID=6825990)
    This appears to be an issue with apple mail... Any solutions?
    On a side note, I am also having problems with the internet connectivity under 10.5.6. There is a serious lag, or wait time for web links to start working. The web works, but there is a ridiculous delay that sometimes causes apple programs to time out. I have read that this is a DNS issue with Leopard. I am getting very disappointed with the latest Apple OS. It seems really buggy for very "primary" applications.

    When using IMAP accounts, and removing the Envelope Index, you must also remove the IMAP folders to prevent problems! This is because the Envelope Index in on each computer, and when the procedure creates new xxxx.emlx names in each Messages folder, in each mailbox it may lose sync with the messages on the server. They are only on the Mac to reindex, if you have selected to Keep all messages for Offline viewing. See:
    http://docs.info.apple.com/article.html?path=Mail/3.0/en/14019.html
    Having said that, any connectivity issue could impact what you are experiencing.
    I am not having problems with connecting to IMAP accounts, btw.
    More info, please.
    Ernie
    Message was edited by: Ernie Stamper

  • Slow Download on new iMac Fast on old Ti Book

    I have three computers on a AEBS, iMac 2.4 802.11N, MacBook 2.2 802.11N and an old Ti Book 400 with a Belkin USB wireless modem 802.11G. While trying to download the OSX 10.5.2 combo 343 megs the other day, I noticed that it was going to take 14 hours on my IMac 802.11N and when I checked out the TI book using Speed download, it was going to take 1 hour 20 mins for 340 meg file. The upgrade was downloading at 85 kbps on the Ti Book and 6 kbps on the iMac 802.11N I downloaded it on the Ti Book and indeed it took just less than two hours. I tried downloading the 10.5.2 on the iMac twice and it would get to 289 megs both times and quit after an all night run.
    Must be set up wrong or the Belkin USB wireless device is a super piece of equipment. Any one seen this problem?

    Thanks for all the help I have received from everyone out there in cyberlandia, like it was alot.
    I solved my problem on my own and what a feeling. I tweaked the IPv4 settings by ending the numbers in an even number instead of an odd number (.172, .174 ,.176 etc). Sort of stumbled onto this but it worked as my download speeds were 6kbps when I started and went up to 750 kbps shortly afterwards. I am in South America and our internet connections are slow compared to the States. Wish I could get a 5 meg download speed but that is not going to happen. 750kbps (@ $90 per month) is a joy compared to the dial up I had.

  • What is the best wireless printer for new iMac w/Lion?

    I just bought an iMac (Lion) and now, I need to buy a new printer since my old one is not wireless capable (HP Photosmart C5280 All-in-One). My old G4 is still up and running (using it only for Adobe CS2 until can afford that upgrade) and the printer works fine. However, the iMac will not be in the same place as the G4, so I need a wireless printer.
    I would also like the new printer to play nice with a PC laptop (husband's for work) as well as be able to eventually print from an iTouch and iPad.
    I may be asking a lot, I know.
    I would buy AirPort if I knew it worked with my current printer, which would be great... but from what I've been able to research, that isn't possible with this model. I will eventually end up buying AirPort at some point in the future, but right now a printer is my focus and I would prefer not to buy both right now.
    So my question is...what printer would be best for both a Mac and PC without having to buy AirPort also?
    Thanks in advance!

    Whatever you do - do not by the HP8500. I am about to take a baseball bat to mine and bett the living daylights out of it. I used to have a 6500, reasonably god  but slow and woudl not scan when linked to the mac...so I 'upgraded'.
    Initially it worked well, quality is good and did everything well ....it still will not scan with the mac but will with every other lap top/PC in my house..but hat did not bother me too much. It is fast and quality is good...UNTIL
    - It drinks ink faster than than you can imagine
    - you cannot buy non hp replacement cartridges easily and not from Staples of PC World etc
    - It sense that ink is running down so keeps sending annoying messages
    - if you use a non std cartridge it registers it as empty and send more annoying messages
    - the cartridges cost about £50 to replace al four - you can buy a new kodak all in one printer for £55
    - it will print perfectly well with non HP or HP remanu cartridges, but still sends the dumb messages
    - when using HP catridges it keeps telling you to replace them even though they are not empty and theres plenety of ink (marketing scam)
    - This morning, the printer decided that the new (non HP magenta cartridge) that  put in yesterday and was quite happy with ...is now empty...it refuse to print even black until i replace that cartridge.
    I have no problem buying HP catridges if the price is fine - but the combination of a software blip plus high prices make me seethe. I will destroy this piece of junk and buy myself a Kodak or Brother - but never ever again an HP product - having spent over £3000 on PC/Laptops and printers from these bozos over the last two years they can count me out from next years forecasts

  • E4200 Slow Wireless download and Network File Sharing

    When I first got the E4200 up and running I was able to transfer files from my wireless laptop to a wired laptop at speeds of over 2 MBps(distance was over 40 ft).  Now I have both laptops running wireless and a desktop that is wired via ethernet to the 4200 router and network file sharing runs much slower.  Right now network transfer speeds are around 500-550 kBps.
    Wireless network speeds are being affected also.  Wi-fi d/l speeds via Cisco speed test is usually 5-6x slower than my wired speed tests, with upload speeds being faster than the d/l speed(Laptop is only 2 feet away from router for testing).  And sometimes the wireless d/l speeds will slow down all the way to .15 mbps.
    Has anyone come across this problem and found a fix for it, or have some suggestions?  The router settings are mostly default and I have reset it to factory defaults via web interface and tried power cycling.  But nothing so far has worked.  I would hate to have to return this router and go back to the wrt54g.

    Ok, well I tried all these and changing the MTU down to 1365 made it run real slow, so I found out the optimal mtu and switched between auto and manual 1500, and auto gave me more consistent speeds.  It does seem to be running a bit faster with the name change of the 5 ghz band, and changing the channel of the 2.4 ghz band(Name changing 2.4 band did not make any noticable differences). 
    Right now I am getting download speeds around 10 mbps on the vista laptop(wireless), while the windows 7 desktop(wired) and laptop(wireless) are usually around 5.3-6 mbps.  File sharing between the windows 7 machines are 4.3 MBps and 2.9 MBps between vista laptop and W7 desktop.  Upload speeds on all machines are around 7mbps.
    I am happier with the more consistent speeds between all machines instead of really fast between just 2, but am confused to why the vista laptop is running faster and my upload speed is faster than the download speeds on 2 of my machines.

  • EA6500 slow wireless download

    Hi,
    I've tried trick I found in my search, this is my hope for an answer.
    I've had my Linksys EA6500 for a half year or so, and for a mouth or 2 ago my internet started being very slow, on the devices on wireless. Almost 0. My internet connection is 60 Mbps, but on 2.4 Ghz my test show 7 Mbps at best, most of the time 2 Mbps. 5 Ghz is a little better at 15 Mbps to 20 Mbps, and thats okey, but not as good as 60 Mbps. Cabled, the speed is 60 Mbps every time. I have now bought a Gramofon, which can extend the network or create it's own based on wireless or cable. I have connected the cable to Gramofon and created it's own network and i'm getting 35-48 Mbps, and thats a speed i can live with.
    The router has the newest firmware, I have reset the router and media prioritization is set to off as that is what everyone says works.
    Do you folk have a solution, or could it be a defect in the antennas?

    The router and extender have to be on different channels and with at least two channels between them or they will cause radio interference with each other.
    Also try setting your Media Prioritization Downstream Bandwidth to 60mbps with WMM Support enabled. Keep all devices and app normal priority to start with.
    Set Wireless security "AN Only" or "Mixed", WPA2 Personal (not mixed) and Channel Width to "Auto".
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

  • I recently bought a new iMac as well as a wireless time capsule and have it connected how can I use this external drive as the location to store all my files for iTunes, or is this even possible?

    New iMac user here, I recently bought a new iMac and Time capsule and have the whole network up and running now. I have connected another external HD to the time capsule as well and have a total of 3 TB of storage connected wireless to my new iMac. My question is can I use this location as the default location for iTunes?  I doubt I am gonna run out of room considering the iMac has 1 TB of storage already, but I'd prefer to keep my movies and music off the Mac to keep it running smoothly. If this is possibly, I'd like to do this with iPhoto as well. 

    I would advise against placing your iTunes library on a Time Capsule.
    The Time Capsule is designed as a backup device and not for wireless streaming of video.
    Before you do anything more, can I suggest you put into place a reliable, redundant backup strategy.
    Unless you are prepared to risk loss of your iTunes library due to a hard drive failure, I would not put iTunes on the Time Capsule.
    Leave your iTunes library on your iMac until such time as your internal drive is full. Backup to Time Capsule using Time Machine and create a clone of your internal iMac HD to your external drive.
    That's my 2 cents worth. Others may have a different opinion.

  • New iMacs slow to open programs compared to previous model?

    Hi all,
    I have noticed something while looking at the new iMacs on display in store:
    While a previous-model (just superseded) 24" 3.0g ghz dual-core opens iMovie in 4 seconds, the new models repeatedly take 40 seconds or more to do the very same thing. On different machines...in different stores...same thing happens.
    When questioned why, the assistant looked at me uncomfortably and said "Yes, I have learned Apple has supplied us with demo machines installed with the incorrect display drivers..." Huh? Demo machines? Wrong display drivers?
    I think he was trying to have a lend of me...surely (a) Apple doesn't supply demo machines to the outlets and, (b) they wouldn't install graphics drivers separately to the rest of the system software.
    Anyway...has anyone else noticed the slow performance of the new iMacs when opening programs?
    Cheers.

    myhighway, what's your point in relation to my original observation?
    What I was saying was that it was interesting that the new models were - in my experience - quite a bit slower than the older model. I had experienced this in two different stores. Had anyone noticed/experienced this and what could be the reason? I just thought the sales guys explanation was a bit flaky at best. I was making a simple observation...no biggy.
    Whatever the reason for whatever Apple does (who cares?) it was interesting to note that the newer models appeared slower than the old.
    Oh and by the way, I have been a very proud Mac owner since my first in 2003. Will never buy anything else but a Mac now, unless I really have to. So I am already - well and truly - a mac convert.

  • TS1565 I bootcamp already downloaded (but not installed) on new imac

    is bootcamp already downloaded to new iMac's or must I download it

    /Applications/Utilities/Boot Camp Assitant
    Or go to Spotlight, little magnifying glass in upper right hand corner of monitor screen and start type boot
    It should pop up as top find then double click to open it
    Allan

Maybe you are looking for

  • White logo with transparency on part of it-into InDesign?

    Hi all, I have a white text logo that I applied an opacity mask to (in the transparency palette). I would like to copy & paste that white logo into an InDesign file....but when I do, it shoes up as regular full-white text. (opacity is missing- lookes

  • Definition of PDF template position

    I have a PDF form, where templates can be deleted and added via buttons. The PDF form consists of 2 categories, template category 2 and template category 3. How can it be done that template category 2 is only added at the last page of category 2 and

  • Recent plug-in update from Apple 3/26/08

    I just updated earlier today with the latest software update that dealt with plug-ins for Logic 8 and other programs. Now I can't record on any audio on any Logic 8 file that contains audio tracks with plug-ins. I get an error message -36. I can stil

  • Security Patches and features

    Knowing that the XE is currently beta, is Oracle going to make patches available for XE as it is doing for the other RDBMS products? Is there any plans for having a GUI version of SQL*PLUS included with XE? Is there a supported way to move the XE exe

  • Org.apache.axiom.om.OMException

    Hello! I have deployed the same web service on two different machines. They are Axis2 web services that run on Tomcat6. One of them is on my local machine with Linux Fedora. When i write http://localhost:8080/axis2/services/ProvisioningAPI?wsdl in th