SM58 Transaction Error
Hi Everybody,
All day we are having the problem in the SM58 transaction in PRD environment.
The message thar appear is :
Caller Function Module Target System Date Time Status Text Transaction ID Host Tctn Program
CUA_ECP_400 SUSR_USER_RESPONSE SMDCLI200 14.06.2010 14:47:12 wrong Name or password 0A090A1904F04C166B1F0BD6 ecc01 SAPMSSY1
Caller Function Module Target System Date Time Status Text Transaction ID Host Tctn Program
CUA_ECP_400 SUSR_USER_RESPONSE SMDCLI200 14.06.2010 14:47:38 User is locked 0A090A1904F04C166B390BE1 ecc01 SAPMSSY1
We have a CUA configured in the Solution Manager, i already checked that the user
CUA_ECP_400 is not locked in PRD and Solution Manager.
How can we solve this issue?
What log can i check?
Best Regards,
Fábio Karnik Tchobnian
Dear
Double click on the connection SMDCLI200 in SM58 and check the connection test & authorization test.
The caller entry in SM58 does not equal the user that is used in the actual connection. So most likely you are looking at the wrong user as you mention the user is not locked, the log clearly states the user/pass is incorrect and that after X attempts the user gets locked.
When the authorization test fails, you will have to check the correctness of the password in the RFC definition and if the user is locked on the target system.
Kind regards
Tom
Similar Messages
-
ORABPEL-08033: EJB Transaction Error
Hi
I have a usecase in which procA(sync Service) calling procB (Async Service) and on completion of execution, ProcB gives a non blocking invoke back to procA. Condition: The either of one should be in running state always.
However there are fault situation in ProcB hence to not to break the sequence we have put a catchAll block which handles/logs and then gives the non blocking invoke back to procA.
But when ProcB fails somewhere because of some other partner links, it is safely going into catchAll and handling it well and when it tries to do a non blocking invoke it is resulting in following:
ORABPEL-08033
EJB Transaction Error.
EJB exception happened while invoking the partner. Please verify partner service.
Can somebody give me some leads in this?
TIA
regards
JoyI have setup catch statements, both an catch all in the outermost scope and a catch for remote fault at the scope surrounding the call to the AQ. But that's not the issue. The problem is that BPEL don't get the error. The error stay's at the adapter and the BPEL don't come to a failed state.
-
R/3 -- RFC -- XI Message stuck in R/3 SM58 with error "invalid date"
Hello,
we have a scenario where we send a message via RFC from R/3 to XI and further on to a file. Everything is setup according to blog 1438 and most of the time it works fine. But sometimes the messages get stuck on R/3 side in SM58 with error "program ID not registered". I can then execute the LUW and it starts working immediately. One strange thing is that the time in SM58 for that message is in the future and there is a comment "invalid date". The R/3 system is a 4.6b and XI is SP16.
Can someone explain why the time is in the future for this message only and is this probably the reason that it hangs?
Thanks for your help.
/MichaelI should maybe also add that we now schedule a job every 5 min to push on the "hanging" entries in SM58 - as a workaround so to say.
-
IDoc to File, SM58 shows error, ST22 short dump - Runtime error
Hi friends,
I am doing a simple IDoc to file scenario using the EVMSTA01 IDoc. My XI is running on client 100 and I am trying to send the IDoc from the client 200 on the same machine. I have completed the design and configuration steps required and also performed the required steps in Sender client (Sm59, we21 and BD54) and receiver client (Sm59, IDX1 and IDX2).
When I tried sending the IDoc from WE19, status meesage says that, the IDoc has been successfully sent to the receiver but SM58 shows error "IDOC_ERROR_WORKFLOW_START_R". When I looked in to ST22, there was a short dump with the below message -
Runtime Errors MESSAGE_TYPE_X
Date and Time 18.10.2008 23:24:29
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_200
Technical information about the message:
Message classe...... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_200"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
Trigger Location of Runtime Error
Program CL_SWF_RUN_WIM_LOCAL==========CP
Include CL_SWF_RUN_WIM_LOCAL==========CM07Z
Row 10
Module type (METHOD)
Module Name IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
rce Code Extract
e SourceCde
1 METHOD if_swf_run_wim_utl_internal~get_system_user .
2 DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4 TRY.
5 IF me->m_int_state-system_user IS INITIAL.
6 me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7 ENDIF.
8 re_user = me->m_int_state-system_user.
9 CATCH cx_swf_run_wim INTO l_excp.
>> MESSAGE ID l_excp->t100_msg-msgid
11 TYPE 'X'
12 NUMBER l_excp->t100_msg-msgno
13 WITH l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14 l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15 ENDTRY.
16
17 ENDMETHOD. "
Any help would be appreciated..!!
PS: Points would be assigned to all the helpful replys without failHi,
See check for RFC destination and it is working as per your configuration or not , i mean , it is trying to locate remote server.. , so try to check in sm59, remote login and the respective result is going to your required client or not ??
Also see the further errors while doing Idoc related scenarios..
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133 - Idocs not reaching XI . Not posted in the receiver SAP
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Regards
Chilla -
FU 065:-Document belongs to cross company- code transaction(error massage)
Hi expert,
I am going to reverse a document (after resetting through LSMW,useing -F.80 as for mass reversal) and getting a error massage below(this document has been generated after F110)
FU 065:-Document belongs to cross company- code transaction(error massage)
Please advise me how can I reverse this document and also advise me what does it mean,
Will it be done by FBU8? (But when I am using it,showing two documents what does it mean and advise should I select both document for reversal)
Please advise
Thanks & RegardsHi
Thanks for your quick advise,
I am trying to do that through FBU8 but I am getting there two documents numbere inside for reversal (it contained two documents)
Should I reverse both documents or I should select one one only
Please advise why it is showing two documents inside
Thanks & Regards -
SM58 (transactional RFC)
Hi,
In our source system in SM58 (transactional RFC) i am getting the Status Text:
User is locked. Please notify the person responsib
Please advise how to proceed
Thanks
Please search the forum before posting a thread
Edited by: Pravender on Aug 12, 2011 4:09 PMHi
Thanks for the update.
I can execute the TCode SM58 and there i can see all the RFC queus are failed becaus of User Locked -
Error (-1200) DBMCconnBase; End Transaction- Error -1 detected, auto rollba
Que tal!!!
Pues ahora tengo este problema, este sap nos esta sacando canas verdes!!
resulta que cuando se esta realizaondo una factura y aparece la ventana donde se ingresa el numero de folio del documento y se da el OK aparece ese error
(-1200) DBMCconnBase; End Transaction- Error -1 detected, auto rollback flag is off, Throwing exception
cuando lo aceptamos solo cierra SAP, ingresamos de nuevo yse puede facturar durante el dia se presenta de manera aleatoria!!
siento que es grave el error.. asi que espero que me puedan ayudar!!Mi estimado, ese es un bug segun nota 1401013 de SAP, ocurre cuando dos usuarios estan trabajando simultaneamente.
Aqui el texto de la misma nota.
Summary
Symptom
You work in localization where folio numbers for documents are used.
Two users are working simultaneously on SAP Business One (either via SAP Business One application or via an Add-on).
Both users are creating Invoice (or performing any action when max folio number is retrieved from the numbering table NNM1).
It may happen that one of the users will encounter deadlocks while working, usually with one of the following error messages:
'-2038 Internal error'
'Error (-1200) DBMCconnBase:: EndTransaction - Error -1 detected. auto rollback flag is off. throwing exception'
'Internal error NNM1 2038'
The deadlock can appear on NNM1 table and OINV table.
Other terms
Lock, Add, Error, Crash, Close, Exit, Operation, Action, Parallel, Same Time
Reason and Prerequisites
Application error
En que parche andas?
Esto se arreglo con el parche 09 del service pack 01 -
I purchased an upgrade for "What's That Sound?" Sound Discrimination for toddlers and children, 500 + additional sounds. However, when trying to download it to my iPad I get "Transaction error. Please try again later!" and my iPad freezes there. I have tried since 2/9/13 but get the same error message. What can I do?
Hi,
Ask you BASIS to implement the following Note throgh SNOTE:
Note 204841 - Message CY 831 Structure KBED is not currently supported
Pls reward points if solved.
Regards,
Renjith Michael. -
Transaction errors: The lock operation ended unsuccessfully because of deadlock.
Hi,
One of our process is getting "Transaction errors: The lock operation ended unsuccessfully because of deadlock." error while processing Partitions in AS 2005.
We have a process that processes dimensions and partitions based on a SQL table. Sometimes when the it is processing two partitions at the same time (multi-threaded) for same measure group, server throws deadlock error. This does not happen all the time.
Both partitions are bound to different tables in relational database and I also traced the SQL Server and did not get any deadlock error.
I searched for this error on Google and did not find anything.
Anyone have any idea about this error?
ThanksHi All,
when i execute the job for cube refreshment,sometimes it is executing successfully,but sometimes it is getting failed with below error
Started: 4:08:08 AM Error: 2015-01-14 04:55:21.03 Code: 0xC11D0005 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Transaction errors: The lock operation
ended unsuccessfully because of deadlock. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 4:08:08 AM Finished: 4:55:21 AM Elapsed: 2832.18 seconds. The package execution failed. The
step failed.
If any find the solution please post on it.
Thanks
Rambabu -
A jdbc transaction error occur
Hi Everybody
A jdbc transaction error occur when I deploy the application on the server .
Below is the stack trace
#SAP J2EE Engine JTA Transaction : [03bfffffffd3a000ffffffc0]####Application [13]##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.dbpool.exceptions.BaseSQLException: Cannot commit transaction from this connection of "YTSQLS2K" DataSource. This resource participates in a local or distributed transaction.
#SAP J2EE Engine JTA Transaction : [03bfffffffd3a000ffffffc0]####Application [13]##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.dbpool.exceptions.BaseSQLException: Cannot initiate transaction from a connection of "YTSQLS2K" DataSource. Local or distributed transaction has already started.
#SAP J2EE Engine JTA Transaction : [03bfffffffd3a000ffffffc0]####Application [13]##0#0#Error#1#/System/Audit#Java###Exception #1#com.sap.engine.services.dbpool.exceptions.BaseSQLException: Cannot commit transaction from this connection of "YTSQLS2K" DataSource. This resource participates in a local or distributed transaction.
Any idea about it
I use the jdbc version in datasource <jdbc-1.x>
is there a need to replace it with <jdbc-2.0>
Thank You
Syed SaifuddinHibernate allows you to choose transaction manager. As Nikolay pointed out, in a JEE envirnment it's prefferable to use JTA transactions. All you need to do is to configure hibernate to use a JTA transaction manager. It is all written in the Hibernate documentations. See
http://www.hibernate.org/hib_docs/v3/reference/en/html_single/#configuration-j2ee
and
http://www.hibernate.org/42.html#A5 .
The relevant properties that need to be set in the configuration are:
hibernate.transaction.factory_class=org.hibernate.transaction.JTATransactionFactory
and
hibernate.transaction.manager_lookup_class=<Class that knows how to lookup>
You need to implement a class that knows how to lookup user transaction in SAP J2EE Egnine.
The class must extend org.hibernate.transaction.JNDITransactionManagerLookup and only override its abstract method getName (simply returning the lookup string). Then provide the fully qualified name as value of the property and make sure that Hibernate can load the class.
That should work.
HTH
-Georgi
Message was edited by:
Georgi Pavlov -
Could not commit transaction Error 1 Detected During Transaction G/L Account
hi experts
when i was adding Sales Order i am getting an error as Could not commit transaction Error 1 Detected During Transaction G/L AccountHi,
Plz find the following threads:
Transaction failure with error message \"Error -1 detected during transaction\" when update the G\\L Account D…
"Could not commit transaction: Error -1 detected during transaction"
Could not commit transaction: Error -1 detected during transaction 'Payment Methods for Payment Wizard' (OPYM)
Could not commit transaction when inserting new items -
"Could not commit transaction: Error -1 detected during transaction"
hi guys,
im getting this error "Could not commit transaction: Error -1 detected during transaction" when trying to create standard document/s. i am now using B1 8.8, MS SQL 2008.
originally, my program was written for B1 2005, MS SQL 2005, and it WORKED.
we upgraded into B1 8.8, MS SQL 2008, and now my program is not working. it is now having the mentioned error upon committing transaction (vCompany.EndTransaction(wf_Commit)). tried removing transaction handling, and it WORKED. also, tried simplifying the program, instead of creating multiple documents, i modified it in just creating one document with transaction handling, and it WORKED.
initialliy, this issue seems to be related to MS SQL 2008.
please help, thanks.Hi Emmanuel........
You get this error due to the Approval Procedure.
Please check if it is activated then please deactivate it from Administration> Approval> Approval Template.......
Then try.......
Regards,
Rahul -
"Transaction Errors : Aborting transaction on session " while processing the cube
HI Team,
Currently i have developed a cube and successfully deployed it in to the SSAS server.
But when i process the cube the measures in the cube got successfully processed. After that the process is still running and showing the status as "Transaction errors : aborting transaction on session XYZAB".
can you please guide me in solving this issue. The cube takes more than 6 hrs to process.
thanks in advance
baskar kHi,
I have Similar issue with 2005 and in 2005 I can't execute select * from $system.discover_sessions.
Do we have any other way to resolve it.
If I restart SSAS Server, It starts working fine and I cant restart at day time.
http://blogs.msdn.com/b/sql_pfe_blog/archive/2009/08/27/deadlock-troubleshooting-in-sql-server-analysis-services-ssas.aspx
Thanks Shiven:) If Answer is Helpful, Please Vote -
Programm Front Line Commando
Do you want to bay one Ladge Crate of gold for 20USD
Buy
Please contact iTunes support to complate this transaction
ERROR - purchase failedYou need to contact iTunes Customer Support. There is a "Contact Us" link at the bottom right of every forum page.
Best of luck. -
Call transaction error handling
how to maintain the log i.e sucess/failures like below.
Line No. Success/ Failure Document No Error Details
1 S Doc 740000001
2 S Doc 740000002
3 F Co- code does not exist
4 F GL Account does not exist
I'm getting only one last document no: but i need all the documents to be displayed i.e either success/failures.
below is my code.
TYPES: BEGIN OF ty_filedata,
bukrs TYPE bukrs, "Company code
blart TYPE blart, "Document type
bldat TYPE char10, "Document Date
budat TYPE char10, "Posting date
xblnr TYPE xblnr, "Reference
bktxt TYPE bktxt, "Document Header text
waers TYPE waers, "Currency
newbs TYPE bschl, "Posting Key for the next line item
wrbtr TYPE char10, "Amount
zuonr LIKE bsik-zuonr, "Assignment
sgtxt TYPE sgtxt, "Text
newko TYPE hkont, "Account for the next line item
END OF ty_filedata.
TYPES: BEGIN OF ty_detail_log,
item_no TYPE i, " Item line no.
status(1) TYPE c, " Status - success/failure
doc_no TYPE bkpf-belnr," Document No.
message TYPE string, " Message
END OF ty_detail_log.
*& DATA declaration of internal tables
Internal Table declaration for excel data
DATA: it_itab TYPE STANDARD TABLE OF alsmex_tabline INITIAL SIZE 0,
Internal Table declaration for upload data
it_upload TYPE STANDARD TABLE OF ty_filedata INITIAL SIZE 0,
Internal Table Declaration for BDCDATA
it_bdcdata TYPE STANDARD TABLE OF bdcdata,
Internal Table Declaration for BDCMSGCOLL
it_bdcmsgcoll TYPE STANDARD TABLE OF bdcmsgcoll,
Internal Table Declaration for FILENMAE
lf_fname TYPE rlgrap-filename.
t_err_log TYPE STANDARD TABLE OF ty_err
INITIAL SIZE 0, " table for validation error log
t_DETAIL_LOG TYPE STANDARD TABLE OF TY_DETAIL_LOG.
C_MSGNO TYPE BDC_MNR VALUE '312',
*& DATA declaration of work area
Work Area declaration for Excel Data
DATA: w_itab TYPE alsmex_tabline,
Work Area declaration for upload data
w_upload TYPE ty_filedata,
Work Area declaration for upload data
w_upload_n TYPE ty_filedata,
Work Area declaration for upload data
w_bdcdata TYPE bdcdata,
Work Area declaration for upload data
w_bdcmsgcoll TYPE bdcmsgcoll,
w_detail_log TYPE ty_detail_log.
*& SELECTION-SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK bk1 WITH FRAME TITLE text-001.
PARAMETERS:p_file TYPE rlgrap-filename. " MODIF ID G1.
SELECTION-SCREEN: END OF BLOCK bk1.
*& AT SELECTION SCREEN
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
dynpro_number = syst-dynnr
CHANGING
file_name = p_file
EXCEPTIONS
mask_too_long = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
*& START-OF-SELECTION
START-OF-SELECTION.
DATA: lw_itab TYPE alsmex_tabline.
lf_fname = p_file.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
EXPORTING
filename = lf_fname
i_begin_col = '1'
i_begin_row = '6'
i_end_col = '12'
i_end_row = '999'
TABLES
intern = it_itab[]
EXCEPTIONS
inconsistent_parameters = 1
upload_ole = 2
OTHERS = 3.
IF sy-subrc <> 0.
*MESSAGE S205(ZF_COMMON_MSGS_FIN1) DISPLAY LIKE C_E.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ELSE.
IF it_itab IS NOT INITIAL.
SORT it_itab BY row col.
DELETE it_itab WHERE row LT 6.
LOOP AT it_itab INTO lw_itab.
w_itab = lw_itab.
AT NEW row.
CLEAR: w_upload.
ENDAT.
CASE w_itab-col.
WHEN '0001'.
w_upload-bukrs = w_itab-value.
WHEN '0002'.
w_upload-blart = w_itab-value.
WHEN '0003'.
w_upload-bldat = w_itab-value.
WHEN '0004'.
w_upload-budat = w_itab-value.
WHEN '0005'.
w_upload-xblnr = w_itab-value.
WHEN '0006'.
w_upload-bktxt = w_itab-value.
WHEN '0007'.
w_upload-waers = w_itab-value.
WHEN '0008'.
w_upload-newbs = w_itab-value.
WHEN '0009'.
w_upload-wrbtr = w_itab-value.
WHEN '0010'..
w_upload-zuonr = w_itab-value.
WHEN '0011'.
w_upload-sgtxt = w_itab-value.
WHEN '0012'.
w_upload-newko = w_itab-value.
ENDCASE.
AT END OF row.
APPEND w_upload TO it_upload.
CLEAR: w_upload.
ENDAT.
ENDLOOP.
*endif.
ENDIF.
DATA: lw_upload TYPE ty_filedata,
lv_lines TYPE sy-tabix,
lv_index TYPE sy-tabix.
DESCRIBE TABLE it_upload LINES lv_lines.
LOOP AT it_upload INTO lw_upload.
lv_index = sy-tabix.
w_upload = lw_upload.
IF NOT w_upload-bukrs IS INITIAL.
IF lv_index GT 1.
CALL TRANSACTION 'FB01' USING it_bdcdata
MODE 'N' UPDATE 'S' MESSAGES INTO it_bdcmsgcoll.
PERFORM fr_format_message_text.
REFRESH: it_bdcdata.
ENDIF.
PERFORM bdc_dynpro USING 'SAPMF05A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BKPF-XBLNR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BKPF-BLDAT'
w_upload-bldat.
PERFORM bdc_field USING 'BKPF-BLART'
w_upload-blart.
PERFORM bdc_field USING 'BKPF-BUKRS'
w_upload-bukrs.
PERFORM bdc_field USING 'BKPF-BUDAT'
w_upload-budat.
PERFORM bdc_field USING 'BKPF-WAERS'
w_upload-waers.
PERFORM bdc_field USING 'BKPF-XBLNR'
w_upload-xblnr.
*perform bdc_field using 'FS006-DOCID'
PERFORM bdc_field USING 'RF05A-NEWBS'
w_upload-newbs.
PERFORM bdc_field USING 'RF05A-NEWKO'
w_upload-newko.
ENDIF.
IF lv_index NE lv_lines.
lv_index = lv_index + 1.
READ TABLE it_upload INTO w_upload_n INDEX lv_index.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BSEG-WRBTR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BSEG-WRBTR'
w_upload-wrbtr.
PERFORM bdc_field USING 'RF05A-NEWBS'
w_upload_n-newbs.
PERFORM bdc_field USING 'RF05A-NEWKO'
w_upload_n-newko.
ELSE.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BSEG-WRBTR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=BU'.
PERFORM bdc_field USING 'BSEG-WRBTR'
w_upload-wrbtr.
ENDIF.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-ANLN1'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
ENDLOOP.
CALL TRANSACTION 'FB01' USING it_bdcdata
MODE 'N' UPDATE 'S' MESSAGES INTO it_bdcmsgcoll.
PERFORM fr_format_message_text .
REFRESH: it_bdcdata.
*& Form BDC_DYNPRO
FORM bdc_dynpro USING program dynpro.
CLEAR w_bdcdata.
w_bdcdata-program = program.
w_bdcdata-dynpro = dynpro.
w_bdcdata-dynbegin = 'X'.
APPEND w_bdcdata TO it_bdcdata.
ENDFORM. "BDC_DYNPRO
Insert field *
FORM bdc_field USING fnam fval.
IF fval <> space.
CLEAR w_bdcdata.
w_bdcdata-fnam = fnam.
w_bdcdata-fval = fval.
APPEND w_bdcdata TO it_bdcdata.
ENDIF.
ENDFORM. "BDC_FIELD
*& Form fr_format_message_text
FORM fr_format_message_text.
DATA: lf_msg TYPE string.
WRITE:/ sy-uline(125).
FORMAT COLOR 1 INTENSIFIED ON.
WRITE : /1 sy-vline,
2 text-041 , "'record Number',
16 sy-vline,
17 text-042 , " 'success/failure',
35 sy-vline,
36 text-043, " 'document no',
55 sy-vline,
56 text-044, "'Error details',
125 sy-vline.
WRITE:/ sy-uline(125).
LOOP AT it_bdcmsgcoll INTO w_bdcmsgcoll.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = w_bdcmsgcoll-msgid
lang = sy-langu
no = w_bdcmsgcoll-msgnr
v1 = w_bdcmsgcoll-msgv1
v2 = w_bdcmsgcoll-msgv2
v3 = w_bdcmsgcoll-msgv3
v4 = w_bdcmsgcoll-msgv4
IMPORTING
msg = lf_msg
EXCEPTIONS
not_found = 1
OTHERS = 2.
IF sy-subrc EQ 0.
WRITE:/01 sy-vline,
02 sy-tabix,
16 sy-vline,
17 w_bdcmsgcoll-msgtyp,
35 sy-vline,
36 w_bdcmsgcoll-msgv1,
55 sy-vline,
56 lf_msg,
125 sy-vline.
WRITE:/ sy-uline(125).
ENDIF.
ENDLOOP.
ENDFORM. "fr_format_message_text
Thanks in advance.Hi Neelima,
Just put the following code within that LOOP...ENDLOOP statement.
LOOP AT it_upload INTO lw_upload.
CALL TRANSACTION 'FB01' USING it_bdcdata
MODE 'N' UPDATE 'S' MESSAGES INTO it_bdcmsgcoll.
PERFORM fr_format_message_text .
REFRESH: it_bdcdata.
ENDLOOP.
Regards,
R.Nagarajan.
We can -
Maybe you are looking for
-
How can I create a pdf but not have it open in acrobat afterwards
I want to be able to create a pdf file but not have it open up in acrobat after it is created. I am doing this in an Access application that outputs a report to a pdf and then faxes that pdf to a fax number associated with that report. It might loop
-
Hi Everyone... I have created a single front page for my website using iWeb 08. I've followed a cPanel tutorial on uploading iWeb08 files to my host server. Once created it was saved to a folder in the Sites folder. I uploaded via FTP using Cyberduck
-
Calendar app: Week days in the day view
Hi, some days ago I had (in the day view of the calendar) the weekdays in the upper bar. But these are vanished and I don'd know why and do not know how to bring them back. I compared the day view to a collegue's Z30 day view but he has still the wee
-
India Localization Invoice Distribution DFF has No Values
Hi, We are implementing India Localization. In AP, while entering Invoices, the Distrbution DFF contains no values. This is inspite of creating tax codes, taxes, Threshold setups and selecting the OU. Pls suggest why I'm unable to find the Tax ID val
-
External Monitor (HDMI Projector) not recognized in AE CC or AE CS6 with New Macbook Pro
Got a really tough problem that maybe someone can help me find a solution for. I had an old Macbook Pro (2009-ish) that I was using in conjunction with AE and my HDMI Projector to do projection mapping work. The laptop motherboard wore out recently