Small(hopefully) Problem with 5:1 headphones on audigy 2

I recently purchased a Razer Barracuda headset and there seems to be a small problem. Ive got all of the plugs in their color-coded slot but the left and right channel seem to be backwards. Any help would be appreciated.

Krypto,
Center channel works fine for me in all modes.
I turned on WMP 0 with a few mp3's. CMSS, CMSS + EAX Effect, CMSS2, CMSS2 + Effect. I went through several effects w/ CMSS & 2.
I did notice a couple things that could be affecting you though. I have the CMSS "Fader" for lack of a better term.. it moves the stereo focus from front speakers to back speakers.. set to 0%, which is balanced between front and back. Also, in the EAX Effect pane there this the effect amount. When I played w/ these two sliders and different effects, I noticed the center speaker did get very faint at times. Sometimes all that could be heard was reverb or echo.
Maybe it's the unique combination of CMSS setting and effect amount, plus the type of center speaker you have just not getting enough power?
Hope this hel
ps.

Similar Messages

  • I am having problem with pairing my headphones

    I am having problem with pairing my headphones its just searching for ever and no options to search by name of device or number

    Have you put the headphones in "discovery mode"?

  • There is a problem with the left headphone or stereo  headphone jack connection in the ipod touch 2nd generation

    I have had my ipod touch 2nd generation for 3 yrs. Now its been a year with this problem but i never seem to get it fixed because i lost my warranty and repair certificate a year ago. So  the problem is whenever I put in a headphone jack for some reason only the right head phone or right speaker works not the left, but when i place the ipod on the docking port both speakers on my stereo work.
    Now I have taken great care of this thing. Never lost it. I assume that a connection inside the jack port is pushed in from debrie (forgot how to spell that word)  because, I always place my ipod into my pocket. The only way to get the left speaker or headphone to work is to push on the headphone jack so it tilts, then the left speaker works; but when i release it the left speaker or headphone turns off or stop making sound. So i know its not wiring problems its the connection for the headphone jack to the ipods jack's connection for the left speaker. Though microphones work.
    My question is can this be a DIY or do i have to take it in to a local apple store. Problem i lost the warranty and protection repair form or license 2 years ago. I have had no problems with my ipod at all these years until this problem has consisted to happen since last year.
    Anything?
    Thanks,
    Sigma119

    - If you want to replace the headphone jack yourself see:
    iPod Touch Repair - iFixit
    - Apple will only exchange your iPod for a refurbished one for this price, You get a new battery.  However, it may not be worth it for a 2G iPod.
    Apple - Support - iPod - Repair pricing- A third-party place like this one is less expensive. Google from more places.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

  • E71 problem with BT stereo headphones

    Hello!
    I have got a E71 and I have a problem with the BT stereo headphones (Model Clip IIs of I-TECH I have some time with other phones and I have never given any problem) I use to listen to MP3s on my SD, and the fact that at some point the sound begins to 'stutter', that is no longer playing but continues to sobs, the sound comes and goes ... it does not always but sometimes, and sometimes no But often jumps out the problem and I have to close the player, wait a while 'and then restart it. Given that the first thing I did was upgrade to the latest version noBrand FW 110.07.127 RM-436 09/10/2008, but has not resolved ...

    I think this is due to the phone's CPU getting overloaded by having to recompress the audio stream for A2DP (the BT profile used for stereo). Avoid running any other apps when you're listening to music and see what happens.
    Sanjay Mehta
    Motorola "Brickphone" circa 1996, Alcatel One Touch, Ericsson R380, Sony Ericsson T220, Sony Ericsson T630, Nokia E50, Nokia E61i, Nokia 9300i, Nokia E71,Nokia X6, Google Nexus S, iPhone 4S

  • CS4 Small Video Problem with Card Update

    OS: Vista 64
    CPU: AMD x2 64 4800+
    MB: Asus A8N SLI Premium
    RAM: Corsair Extreme 4GB
    CS4 Photoshop
    First Video Card: BFG 7800 GTX 512MB
    New Video Card: AVG GTX 260 (210) Superclocked 896MB
    I had no problem with the Open GL acceleration with my old card.
    I just upgraded my video card to the above and now I'm getting a small problem. I have the newest drivers from the nVidia website for the GTX 260.
    When I move my mouse around the Photoshop work space flickers and flashes a little intermittently as I move the mouse around. I turned off GL Acc. and I still have the problem.
    Any ideas?

    Bob,
    You are correct. Once upon a time I had the Canopus DVStorm with Premiere 6.x and it worked great (and a DVRaptor before that). Then came Premiere Pro and the problems that the DVStorm had were insurmountable so I dumped it and got the RTX-100 which was reputed to be about as good as the DVStorm was in the past. Was I disappointed! It just did not work reliably, hangs, BSOD's, unresponsivess and then when PR CS2 came out you effectively had to get the RTX.2, which was paramount to throwing the RTX.100 down the drain. It seemed to me that with every new version of CSx you needed to get a new Matrox card at extravagant prices for what it offered and still had to wait very long for decent drivers to come out. It just wasn't worth the effort anymore. And when you look here at problems that people experience, the common denominator is usually the Matrox card. So, yes, I am glad I got rid of it and found a very useful purpose for the card: a doorstopper, which must have been the intention of the engineers to start out.
    About Win7: No, I did not have any doubts at all, but in my case I was lucky enough to have a high level network consultant with all kinds of certificates and an impressive experience to advise me and he juist plain told me: "You DON'T want Vista!!! GET WIN7!!! I have been using it for several RC's and it is a revelation." Now after installing and using it for some time, I can only agree.

  • Problem with IPhone 5 headphone port?

    My headphones will not work unless I hold the connector in the port, anyone else having this problem? This is my first iphone and I'm new to verizon so I'm not sure what to do? Can they help me at the verizon store or do I need to make an appointment at the apple store (it's about an hour away!) Thanks!

    I have a one week old iphone 5 and i have the same problem. Today I wanted to listen to some itunes on my new phone, for the first time. Right away, there was a problem - no sound through those cute new earbuds! So I tried another headset, but it didn't work so it must be the jack.
    Here is what happens: When I plug in, sometimes there is sound through the earphone but it quickly stops and goes back to the iphone speakers and then the song on itunes stops playing. No amount of jiggling the jack around or pushing it in farther/pulling it out a bit works to solve the problem. It happens with both types of headphones that I tried.
    Obviously it's the port. I looked on the internet and found a guy in Denmark with the same problem with an iphone 4. He showed via YouTube that there are two contacts within the port, one to switch between the speakers and the headset and the other contact for turning itunes on/off. It seems to me that there is a problem with those contacts within the port. He shows you how to take apart the phone (uh no thanks, gosh) and clean the contacts, but that is not something I think I'll try since this phone is brand new.
    I am not happy about this.
    Do I take it to Verizon (somehow I don't think so because I bet all they will do is send it back) or do I take it to an Apple store? I bought their Apple care thing.

  • IPhone 3G S - Problems With Microphone on Headphone Cable

    Tried two different companies. Both products returned. Keeps activating voice feature on own, leaving music every minute or two (possessed mode), and does not work VERY WELL when using voice commands. < 10%. Love the idea of not taking headphones off to answer calls. Dealt with staff in Apple Store Vancouver. Problem with 3G S, OS 3 or both? This great feature and available products seem to work well with 3G model. Anyone else have this problem? What a great feature... just need it to work.

    Hi Donino!
    Here's an article with some troubleshooting steps relevant to this issue:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Problem with 5.1 sound on Audigy sb0

    after a long struggle with the drivers I managed to find one that installed correctly. Still, I have a problem with 5. sound. When I do the speakers test all the speakers work fine but when I play mp3 or video on WMP only front speakers work. I suppose that it is still the driver problem.
    I have this driver installed.
    http://files.filefront.com/SB+Audigy+Value+SB0570rar/;5367665;/fileinfo.html

    Neal702,
    Please don't type in all caps, it is considered shouting and rude. I'm sure that wasn't your intention, it's just good netiquette.
    Anyhow the iMac will put out 5.1 sound assuming that is what you are trying to do. I recommend you find a cable similar to this:
    http://www.amazon.com/3-5MM-TOSLINK-FIBER-OPTIC-CABLE-TOSLINK/dp/B00006LVF3

  • Problems with HQ-2300D headphones. Lack of surround sound and other minor probs.

    I've bought Creative HQ-2300D, and I am disappointed so far.
    My first problem was instructions. I am not trying to insult anyone, but the booklet didn't instruct anything. It merely explained what the buttons did and what did the pictures mean (as if I can't recognize a notebook when I see one). The diagram did not include PCs, either.
    Regardless, it wasn't useless as finally I've made the headphones & the decoder work. I was surprised that the cable connecting my machine and the decoder was short and thin. Very thin. Here's what I had in my bundle, aside from the decoder, headphones, and cheap Energizer AA batteries:
    http://img293.imageshack.us/my.php?image=img0020qh6.jpg
    "A" is used for connecting the headphones to video game consoles, I gathered, so I put it aside, since I needed to connect the headphones and decoder to my PC. I tried using "B", but couldn't fit the black thing anywhere. "C" worked. Did I get it right?
    I tried music first. Horrid. Bass sounded blurred out and what closely followed could only be described as hands clapping with bass at zero. After messing around with settings, I've managed to reduce that effect to a minimum. Then I've tried watching a movie, and the sound quality was actually very good. Although I've been watching a DVD, I didn't notice surround sound.
    Then I've tried games. Half-Life 2 and then Doom 3 with EAX patch. The sound quality is admirable, but I didn't notice surround sound. Is there anything I need to tweak? Also, there's faint noise after low sounds.
    Are the headphones defected, or what?
    EDIT: Forgot to mention my soundcard is X-Fi Platinum.
    Message Edited by Flawless on 07-07-2007 08:31 AM

    I'm really sorry for the double post, but after thoroughly reading the instructions again, I've managed to eliminate that faint static by pressing Dolby Pro Logic II and Dolby Headphones buttons simultaneously and holding them for 2 seconds.
    But the surround sound is still absent. I thoroughly tested with the helicopter sound circling you, with both CMSS-3D on and off, I fired up Half-Life 2 and Doom 3 and tested if there's any difference between front and back, with both CMSS-3D on and off. I closed my eyes, and I couldn't tell where the sound was coming from.

  • Problems with the sound - headphones in Macbook!!

    Hi!
    I have one of the lastest Macbook, with Core 2 Duo 2,16 Ghz, and I have the first problem (hope the last one ) . I usually use the headphones out to connect the music to large speakers and listen to the music louder, but when I go out and use the integrated speakers, the music in itunes has some sound cuts, sometimes I hear it, sometimes not, and when the music doesn't sound, a light turn on in the headphones out, and I can't turn up or down the volume.
    I don't know if it's a software or hardware problem, but it's a little strange.
    I hope you can help me.
    Thank you very much indeed.
    P.D: Sorry for my English, I'm Spanish and I can't explain better.

    It is going to digital audio output, which has no volume control. See if you can change the Output setting in "Sounds" system preference.

  • Problem with Zen Micro headphone j

    The music played is quieter and individual sounds such as vocals cannot be heard unless i push down on the headphones. I've heard this is a common problem for Creative mp3 players which is unfortunate because i have never had any other problem. My warrantee has just ran out which makes the problem even worse. I've sent e-mails to play.com and creative customer support to see if i can either return it or get it fixed as this is obviously a design flaw rather than something caused by misuse. Is there anything else i can do?

    Just got an e-mail from Creative, did all that recovery mode stuff, downloaded new firmwear and wiped all my music off of it and guess what, the jack still doesn't work properly :angryo you think they'll fix it for free? i hope so!

  • Small picture problem with .jpg

    When I have jpg pictures in the Final Cut timeline, they sort of jump, almost imperceptibly, when there's a transition....is there a way to prevent that? It's quite annoying...

    When you double click on the transition and it opens in the viewer, make sure the start is 0% and end is 100%.

  • Problems with the Vista Driver for Audigy 2

    Hello erverybody,
    today I installed Vista Ultimate 32bit. With the result that the applications and drivers of my Creative CD don't work. I downloaded the new Vista Driver for my Audigy 2 ZS but I must find out that there are no DTS, EAX and also no CMSS 3D Support integrated is.
    I could only choose the option CMSS in the audio console but no CMSS 3D as i have it under windows xp.
    My question to Creative, is it planed that these features will be supported with vista in the future or can i take my soundcard to the garbage ?
    LG BenMessage Edited by Gnubbel85 on 06-05-200706:55 AM

    There is some kind of unofficial driver version located here: I'm currently downloading it and I'll?try. Part http://files.filefront.com/SBAXWXCD+R2partrar/;8604885;/Part2: http://files.filefront.com/SBAXWXCD+R2part2rar/;8606942;/?Since there seems no official way of using my hardware's?DTS and Dolby Digital decoding function on Vista and this is common for all Audigy. I have Audigy 2 ZS plat. , I love?this card It sounds best in the world but Creative has failed to satisfy its customers on Windows Vista. A company has to make its customers feel special, I don't think I'm going to buy another Creative product?if this issue is not resolved.

  • Problem With Headphone Jack

    The headphone jack on my ipod is faulty. I think there is a connection problem in the jack of the ipod.
    I know it isn't the headphones because i have tried various pairs of headphones.
    I got in touch with the place i brought it from and they said to go to Apple directly.
    Does anyone know what i have to do to get my ipod repaired? Contact email? Address to send it to?
    Any help would be appreciated.
    Thanks.

    I to had a problem with my headphone jack. Here is the problem with the iPod headphone jack (or with anyheadphone jack for that matter) Say you like to take your iPod out side, or you leave it in a humid area with the headphones out of it. Very very very small amounts of water will build up in the jack, and this slowly, after about a year coorodes the copper inside. This has happened to two iPods that I have had. Now the only real problem is that, if what i explained above is your problem, it is not covered under the apple warrenty or the apple care program. If you do have to get a new iPod, I would highly suggest getting an Otterbox Water Proof case. It is bulky, but it will save you a lot of money.

  • HT2167 Problems with headphone jack

    Are there problems with using the headphone port with a3rd party headphones?

    As long as it is a 3.5 mm, there shouldn't be. What problems are you encountering?

Maybe you are looking for