Small problem in sending chinese charaters using file adapter

Hi,
Actual scenario is,
Sender system -> file adapter -> XI -> ABAP Proxy -> Receiver system.
error is occured when the data reached the XI.
                                                                                1. The data file contains Chinese characters (Unicode).
2. When file adapter reads this file, the data in the payload no longer
    shows Chinese characters.
Can you please help in this regard...
Thanks,
Surya.

Hi,
Actually i am sending an EXCEL sheet which contains chinese charaters to XI using sender file adapter.
When file adapter reads this file, the data in the payload no longer shows Chinese characters.
what i need to do?
SUrya...

Similar Messages

Problem: The same filename from a sender to a receiver file adapter - SP14

Blog : /people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
My Problem:
The thing works for me and i am able to get my input files name as my output file name. But one thing i noticed is that in my target message, the field where i have mapped the code it always returns the value "null" but finally when the file is created i get the required result.
My input file name is input.txt and i get the same name in my output file too.
In sxmb_moni if i check DynamicConfiguration link i see the following
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <sap:DynamicConfiguration xmlns:sap="http://sap.com/xi/XI/Message/30">
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFTPHost">10.25.116.98:21</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="Directory">/input/test</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileTimestamp">20060228T112200Z</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileType">bin</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="FileName">input.txt</sap:Record>
<sap:Record namespace="http://sap.com/xi/XI/System/File" name="SourceFileSize">770</sap:Record>
</sap:DynamicConfiguration>
But when i check my mapped field i see
<field3>BodyC</field3>
<keyfield>02</keyfield>
<field5>BodyE</field5>
<field6>BodyF</field6>
</Body>
- <Trailer>
<keyfield>03</keyfield>
<field2>null</field2> -> Null value instead of input.txt
</Trailer>
</ns0:MT_Putfile>
The code i have used to map the field2 of the trailer is the following ....
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileType");
String valueOld = conf.get(key);
return valueOld; 
Any clues ?

Gosh this is spooky
Anyway i tried with that line of code but it throws me an error during activation ...
Activation of the change list canceled Check result for Message Mapping mm_IS | http://t-systems.com/Shabarish: Starting compilation Source code has syntax error: /usr/sap/TXT/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Map387c7300a9ac11da9d280011256afae8/source/com/sap/xi/tf/_mm_IS_.java:104: cannot resolve symbol symbol : method getTransformationParameters () location: interface com.sap.aii.mappingtool.tf3.rt.GlobalContainer DynamicConfiguration conf = (DynamicConfiguration) container.getGlobalContainer().getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION); ^ 1 error
The code is :
DynamicConfiguration conf = (DynamicConfiguration) container.getGlobalContainer().getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
//DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
//String valueOld = conf.get(key);
String valueOld = conf.toString();
return valueOld;
Thanx Renjith so far .. but i hope this gets resolved (else i will loose my sleep thinkin abt the situation)

Content Conversion for Sending Communication Channel using File Protocol

I have a file as follows:
CUSC,CRCA,OBAL,DATE
10197,0111,15250094.05,20071008
10758,0111,8131440.17,20071008
12939,0111,8212006.53,20071008
13129,0111,6953749.77,20071008
13331,0111,8607294.15,20071008
13579,0111,11972774.95,20071008
13676,0111,6636698.47,20071008
What is the content conversion that I can proceed with so that I can go with the mapping. I have to use File Adapter?
Please Help

Hi,
Check below links for Content conversion.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
Regards,
Phani
Reward points if Helpful

Using file adapter, got "Sender Agreement not found" error

I used file adapter in my CC and defined all the necessary objects. When I tried to test the configuration and I kept getting "Sender Agreement" error.
Also the chache is cleared too, searched the forum already, couldn't find any clue
Not sure what I did wrong

Hi,
First things first, ensure you have an agreement for each single Communication Channel you have
and that they are correctly associated.
If they are created and associated, you may try the cache refresh with the link:
http://host:j2eeport/CPACache/refresh?mode=full
Kind regards,
Caio Cagnani

Problem with Sender Agreement for EDI File to Idoc scenario

I'm configuring PI for EDI with Seeburger Adapter (Calling as a Module) and I'm having an issue with the Sender Agreement using File Adapter.
Process used is File to IDOC. EDI data will be picked up from VAN (Using existing FTP process rather than using Seeburger FTP) and stored in a folder which is being accessed by PI to send to R/3 to create orders.
All my inbound EDI will be stored in same folder which should be picked up by XI and distribute the same depending upon the respective scenario's in ID and respective mapping/config in IR.
The whole process IR & ID works fine and also creates Idoc in R/3, if I configure for one customer for EDI 850, but when I try to configure for second customer for same EDI 850 having same ANSIX12 version (V4010) as previous customer, I get stuck at the Sender Agreement part for this second customer because I use the same CC for File read for both the customers (Scenarios) and since there is a limitation with File Adapter "sender channel must not be assigned to more than one sender agreement ".
How can I create the Sender Agreement using the same CC for my other scenario?
I tried creating multiple CC for different scenario but when I place a test file for customer A, I see that its being picked up by both CC's.
Pl Advise.
Thanks!
PSR

You need to configure splitter as module in sender file adapter (classifier->bic->splitter) as well as define a message splitter(with partner number and Seeburger mapping) in Seeburger workbench.
Thank you for the reply Aamir,
Do you have any document which can guide me through the process?
Does Seeburger Workbench play any role here? because I'm not using See FTP adapter to connect to my VAN. We get the data from the VAN using FTP process but not using See FTP. I'm using BIC to generate an XSD and SDA file, rest everything is in XI using File to idoc and IDOC to file process.
Thx
PSR

Maximum file size data that can be send to MQ using mq adapter

Dear All,
What is the maximum file size data that can be send to MQ using mq adapter ?
The file can be csv, fixed , xml.
Please let me know if anybody is aware of any limitations
Best Regards
Arc

If you are on 10g then you are looking at a limit of 7MB, although any messages over 1MB will require some tuning.
You can integrate using the native schema, or xml so you can use csv, fixed length, and xml files.
cheers
James

Sender communication channel with file adapter

Hi All,
 Here i am facing some error with the communication channel in which i have used FILE adapter. Here i am using PI 7.0. Here i have configured the communication channel. but i didn't checked the "operating system commands". and i checked the " adapter specific message attributes". i dont know whether i have to check these adapter specific message attributes or not. When i have gone to runtime work bench there i saw in adapter monitoring. there it is not showing any error. but in communication channel monitoring it is showing that it is having -
"processing errors" but i am not getting where will be the error.. Any new ideas will be appreciated.
Thanks in advance,
Ramana

Hi Bhavesh and Aaron,
 Here i viewed the XMl format of the sender file in the mapping. there i found the difference between the file i am trying to pick up by the adapter and the XML instance of the sender interface in mapping. The difference is there in the message type of the <ns0> tag the file i am trying to send is having one message type and name space, where as the XMl instance is having the other message type and same name space.
 i think that will the problem in processing my file. i am not sure about it.please any of you confirm that if it is th processing error i am facing or not.
 Thanks for your efforts.
Regards,
Ramana.

Remove Line feed at the end of the file while using file adapter

Hi All,
I have a requirement. We are sending a file from SAP to FTP using file adapter. we are successful in sending the file to FTP but at the end of the file a extra blank line is created .
Can anyone please suggest how to remove the extra line feed at the end of the file.
Thanks and Regards,
LRK.

check this:
http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/frameset.htm
To define an additional string as a separator after the last column in a row, specify it here. The system skips this string when it processes the last column (otherwise the system would treat it as part of the last column).
Also there are solved threads which deal with same problem....you can even check them out...
regards,
Abhishek.

The same filename from a sender to a receiver file adapter

Michal has provided us with a brilliant <a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14. I guess a lot of people have been waiting to do this. However, I have a slightly different scenario. In this case, XI is used as a medium to transfer a PDF file from one directory to another directory. There is not transformation or mapping involved.
The message is send by File Sender Adapter and received by File Receiver Adapter. Message type is created as a simply type hexBinary. The file is supposed to be picked up as a PDF and received as a PDF, retaining the same file name. As such, the file name is neither stored in the source structure nor the target structure.
Once the PDF file is transfered into target directory, it should be able to be open by using Acrobat directly without further conversion.
We might add a file name file into the target structure but would that rendered the PDF non-readable upon being received by the File Receiver Adapter?
Any feedback is highly appreciated.

Hi
>>We might add a file name file into the target structure but would that rendered the PDF non-readable upon being received by the File Receiver Adapter?
No, adding file name would not hamper the properties. You can name *.pdf or something else.
For that matter any file pdf, word, .msg format etc can be transferred by this approach. We have tried it.
Earlier to SP14 you cannot give the same name to outgoing file without writing a Adapter module. But things are easy with SP14.
Cheers,
satish

File Path using file adapter

Hi Experts.
I have a file to proxy scenario where I just want to get the file path and dont want to read the whole file using sender file adapter.
Is there any way where i can just get the file path and the file should not get prosessed in XI/PI.
Thanks,
Aditya.

use ASMA with Dynamic conf.
Ref:
Accessing ASMA -
http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm
Dynamic Conf vs variable substitution - /people/shabarish.vijayakumar/blog/2009/03/26/dynamic-configuration-vs-variable-substitution--the-ultimate-battle-for-the-file-name
Note:
the get method will help you retrieve the FileName ref. the code in this blog also - Same file name -
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14

The same filename from a sender to a receiver file adapter - SP14

Hi Expers,
I Have Gone through the link which is given bu Michal.
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14
Here My Questions are.........
1.Should we give any file name in the receiver side Adapter in this scenario.?????
2.How wil be the Sender and Receiver Communication channel Parameters????
What Are they???????
Please Clarify me...
Regards
Khanna

Hi Rajesh,
Is your query related to sending the file name from the source xml document to the reciever file adapter. If so this can be achieved.
Pls. do the following.
1. In the mapping program that you are using populate the filename coming from the source into the target root element.
2.Sender adapters can write adapter-specific attributes to the message header; these can then be evaluated at configuration time
3. To change the adapter-specific attributes of the message header by using message mappings, you access the required classes of the mapping API by using a mapping runtime constant.
Note: You donot need to specify any filename in the receiver communication channel.
To access the classes DynamicConfiguration and DynamicConfigurationKey by using the mapping runtime constant DYNAMIC_CONFIGURATION, use the method getTransformationParameters() of the container object.
Create an simple user defined function in the mapping and use the following code.
Imports: com.sap.aii.mapping.api.*;
Parameter: String filename
Paramter: String filename;
filename = fileName + ".DAT";
DynamicConfiguration conf = (DynamicConfiguration) container
.getTransformationParameters()
.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create( "http://sap.com/xi/XI/System/File", "FileName");
conf.put(key, filename);
return filename;
You donot need to hard code the value of the filename in the file adapter for your interface.
In SXMB_MONI, when you see the pipeline services you would see that the value of the filename is populated in the message payload.
Thanks
Indranil

Receiving multiple files with dual extension using file adapter

Hi,
The scenario where I am implementing requires multiple files of different names to be picked(ABC.txt) and dropped at destination(ABC.txt.pgp) up by my File Sender and Receiver adapters. Any idea on about how the configuration for receiving multiple files with dual extension for receiver adapter is to be done?
Note:- currently, The scenario is working fine without dual extension. i.e Its picking all files which starts with ABC and creating at destination as it is. even I configured as ABC.txt.pgp, but its not creating the second extension.
Thanks in Advance
Manmadha

Hi,
Try to concatenate '.pgp ' to the source file name to create the target file name for the receiver file adapter, by accessing the Adapter Specific Attributes using Java user defined function. This might work.
Reference links:
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/43/03612cdecc6e76e10000000a422035/frameset.htm">SAP Help - Accessing Adapter Specific Attributes</a>
<a href="/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - XI: The same filename from a sender to a receiver file adapter - SP14</a>
Regards,
S.Santhosh Kumar

"encoding = UTF-8" missing while writing XML file using file Adapter

Hi,
We are facing an unique problem writing xml file using file adapter. The file is coming without the encoding part in the header of xml. An excerpt of the file that is getting generated:
<?xml version="1.0" ?>
<customerSet>
<user>
<externalID>51017</externalID>
<userInfo>
<employeeID>51017</employeeID>
<employeeType>Contractor</employeeType>
<userName/>
<firstName>Gail</firstName>
<lastName>Mikasa</lastName>
<email>[email protected]</email>
<costCenter>8506</costCenter>
<departmentCode/>
<departmentName>1200 Corp IT Exec 8506</departmentName>
<businessUnit>1200</businessUnit>
<jobTitle>HR Analyst 4</jobTitle>
<managerID>49541</managerID>
<division>290</division>
<companyName>HQ-Milpitas, US</companyName>
<workphone>
<number/>
</workphone>
<mobilePhone>
<number/>
</customerSet>
</user>
So if you see the header the "encoding=UTF-8" is missing after "version-1.0".
Do we need to configure any properties in File Adapter?? Or is it the standard way of rendering by the adapter.
Please advice.
Thanks in advance!!!

System.out.println(nodeList.item(0).getFirstChild().getNodeValue());

How to read MS-Excel file by using file Adapter

hi friends,
I have an issue on read Operation by using file Adapter.
It is necessary to read excel file by using file adapter. But in the native format of file adapter there is no option to read excel type of files.
So friends, please help me how to solve this problem?
Thanks in Advance..

See also this post:
Read Excel File Using FileAdapter in SOA 11g
It might help you

Can we process files with attachments using File Adapter

Hi All,
I want to process files which have attachments using File Adapter.
Is it possible to process such files?
May be using standard modules?
Regards,
CBKLP

Assuming you are talking about sender FILE channel....you can make use of PayloadSwapbean provided by SAP (standard module)...to read data from attachment.
Regards,
Abhishek.

Small problem in sending chinese charaters using file adapter

Similar Messages

Maybe you are looking for