Small virtual company setup

I am trying to set up a small virtual company and am not sure how to find topics that discuss how to do it. Sorry if this question has been answered before.
We have three computers shared by two users at the main office. Both users have laptops and travel. I intend to use the third computer as OS X server. We are on cable with dhcp and no fixed ip address.
We have two employees in different offices with an imac on cable without a fixed ip, but sometimes they come to the office and will sign in on one of our laptops or the server machine.
We have a web server running OS X on a fixed ip currently running webstar, but are in the process of converting to OS X server for web, mail, etc.
Our biggest issue is sharing common files. If I set up share points and have each log in to the web server to share the same files, they are slow to open because many are 3 or more mb. I would like to sync local and server files for users to access everywhere.
Am thinking about using the web server for only web, email, etc.
Am also thinking of using the office server (no fixed ip, but could use DYNDNS so offsite machines can login via name instead of ip address) as the place to login, sync user folders, sync share points, etc.
How do I do this? I can figure a lot out if someone would please point me in the right direction.
Thanks,
Tom

Hi
First of all you are correct about Virtualizatin Windows Server 2012 r2 standart 1 physical on 2 vitual server.About WS2012r2 licencing chek the link;
http://www.microsoft.com/licensing/about-licensing/briefs/win2008-virtual.aspx
I suggest that İnstall Active Directory,DNS,DHCP on Server 1 and install file server role,RDP the other server.Thats the correct topolgy i think.

Similar Messages

PI 2.0 - virtual express "setup" Fail - The passwords do not match:

Hi all,
Since my lab is mostly VM, I was going to upgrade my PI 1.3 to 2.0. Cisco documentation says the inline upgrade is not supported for the small virtual appliance. Anyhow, I deployed the new 2.0 Express virtual OVA file, allowing to to use all needed resources.
To get to the point, when I run through the initial setup/bootstrap, I cannot get past the setting of the admin user's password. Regardless of what I type, I always get the same message "The passwords do not match". I can simply type the letter 'a' for a password attempt and am told they do not match. Only when leaving it blank for the password do I see a message showing a 6 character minimum. I can type abc123 or whatever basic combination, advanced combination, cases, symbols, numbers, etc. No matter what I do I cannot make the passwords "match"!
I have blown away the VM and re-deployed, validating checksum on OVA downloaded, PI-VA-2.0.0.0.294-Express.ova.
I cannot get past this step. Has anyone else experienced this or have any input? I'm not finding anything in my searches.
Thanks!

So I was not correct in what fixed my issue.
So, when I rebooted the host (which contains my MS 2008 DC as well), I had to access my vSphere from my local windows machine client (VM running on Oracle VBox on my MBAIR) through my VPN to my lab.
When typing the password Combos from my local Windows VM, I could get past this step.
When it was time to type the ftpuser/web user (after I performed the initial setup), I again accessed through the vSphere Client loaded on the 2008 DC Virtual Machine running on the same host as the Prime 2.0 Install - same VLAN/etc. I access this via RDP, then launch vSphere from that DC.
From that client I was again getting the Passwords not matching. Only when launching vSphere Client locally (from my local MB AIR VM) was I able to get the passwords to work.
Bottom line, it seems when accessing vSphere client through an RDP session, using the console feature of vSphere client provided mixed/undesirable results. When I access console from a vSphere client (non-RDP) it was working fine.
Just figured I would let you know what seems to be the trigger.
Thanks Scott!

I am a small service company and we use the iphone 4 do you have a program we can use for scheduling one one computer that has all the schedules of our service techs so we can change appointments and track

I run a small service company and we use the iphone 4, do you have a program we can use for scheduling from one or two computers that allows us to schedule service calls and track our service techs.
A program we can enter each phone and have there schedule and current location available at all times.

Search the iTunes App store or find a developer to create an app that meets your needs.

How can a small Linux company like ours get involved?

How can a small Linux company like ours get involved in NI technologies? Is there a Linux group? Thanks,
[email protected] http://fortuitous.com

I also want to learn more about getting involved with NI, although not related to Linux.
I know that you may join the NI Alliance. Some type of expertise in the area already may be needed:
www.ni.com/alliance
www.vartortech.com

Can I use acrobat pro 7.0 for small business company?

Hi,
We want to use acrobat pro 7.0 at our company. The link is https://www.adobe.com/cfusion/entitlement/index.cfm?pid=2026489&e=cs2_downloads where I downloaded.
I read license term for this. I've not found license policy for small business company. Is this product free for any persons?
Please reply for me.
Thank you!
-Matthew-

you're welcome, but no, acrobat 7 cannot legally be used by non-licensed users for any length of time.
and while there are non-current adobe trial versions available back to certain versions, for acrobat, version 8 is the oldest trial version available. so, you can legally download and use (for 30 days) unlicensed acrobat versions, 8, 9, X and the current version XI.
the acrobat pro 7 that adobe is making available is only legal to use by licensed acrobat 7 owners. it is not legal to use for 30 days, or any other duration (limited or not), for non-licensed users.

Which module to implement for a small education company

Hi all,
Which Modules of oracle are to be implemented for a small educational company of manpower 100-400?
thanks n regards
ramki

You're right Fubals, WebApps are the best course of action to explore.
I found this rather splendid article on what I'm trying to achieve in the BC Online Help:
http://helpx.adobe.com/business-catalyst/partner/web-apps-module-create-custom.html
I hope that it comes in handy for other BC newbies who are looking to create the same functionality as I am.

Advice on running XE on a small virtual Linux host ("Virtuozzo")

Hello,
I'm really excited by XE... I've been developing applications with Oracle at work for a couple of years now and now I can finally get rid of MySQL for the stuff I do in my spare time. Thank you, Oracle! :-)
I've got a virtual Linux root server which is hosted at a local service provider.
They call it a "VPS" (virtual private server), and it runs under Virtuozzo, http://www.sw-soft.com/products/virtuozzo/, which is somehow similar to VMWare.
My idea is to stop using the MySQL database that came preinstalled with the server and install XE instead. Currently, my server is rather limited in terms of available RAM and disk, so I'm considering an upgrade to a bigger type of VPS.
The options most compatible with my budget are:
- a virtual Linux server with 256 MB RAM and 500 MHz CPU or
- a virtual Linux server with 512 MB RAM and 1000 MHz CPU.
Besides a small Oracle XE database, I'll be running Apache with mod_python and a couple of web apps / scripts I'm writing. I don't expect high performance, I just want to have a small Oracle database to play with and to run some web pages.
Does anyone have experience with a similarly limited setup? Will the smaller server still allow some breathing room for other software, or is 256 MB the bare minimum required for Oracle itself?
Any advice is greatly appreciated!

Hello,
I finally got my server upgrade and now have a virtual machine that's "should" be big enough to run XE (256 MB memory usable, 15 GB disk)
However, installation wasn't as smooth as I had hoped... I just can't get it to work. Any ideas? I have no idea what to do next.
Memory stats (these seem to include other machines on the same host):
# free -m -t
total used free shared buffers cached
Mem: 1006 980 25 0 83 430
-/+ buffers/cache: 466 539
Swap: 2000 558 1442
Total: 3006 1538 1467
Installation:
# rpm -i oracle-xe-10.2.0.1-0.1.i386.rpm
This system does not meet the minimum requirements for swap space. Based on
the amount of physical memory available on the system, Oracle Database 10g
Express Edition requires 1509.0 MB of swap space. This system has 1442 MB
of swap space. Configure more swap space on the system and retry the installation.
error: %pre(oracle-xe-10.2.0.1-0.1) scriptlet failed, exit status 1
error: install: %pre scriptlet failed (2), skipping oracle-xe-10.2.0.1-0.1
I tried adding more swap space by creating an additional swap file, but that's not possible; swapon fails with "Operation not permitted". As far as I know, only the hosting machine can add more swap for me.
Using rpm ... --nopre ... does work, though:
# rpm -i --nopre oracle-xe-10.2.0.1-0.1.i386.rpm
Executing Post-install steps..........
usermod: `dba' is primary group name.
You must run '/etc/init.d/oracle-xe configure' as root user to
configure the database.
# /etc/init.d/oracle-xe configure
/etc/init.d/oracle-xe: line 16: /etc/init.d/functions: No such file or directory
Oracle Database 10g Express Edition Configuration
This will configure on-boot properties of Oracle Database 10g Express
Edition. The following questions will determine whether the database should
be starting upon system boot, the ports it will use, and the passwords that
will be used for database accounts. Press <Enter> to accept the defaults.
Ctrl-C will abort.
Specify the HTTP port that will be used for HTML DB [8080]:
Specify a port that will be used for the database listener [1521]:
Specify a password to be used for database accounts. Note that the same
password will be used for SYS, SYSTEM and FLOWS_020100. Oracle recommends
the use of different passwords for each database account. This can be done
after initial configuration:
Confirm the password:
Do you want Oracle Database 10g Express Edition to be started on boot (y/n) [y]:
Configuring Database...
Starting Oracle Net Listener.
oracle-xe 0:off 1:off 2:off 3:on 4:off 5:on 6:off
Starting Oracle Net Listener.
Starting Oracle Database 10g Express Edition Instance.
ps shows that the listener is running, but nothing else. Manually running /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/config/scripts/XE.sh I see this:
ORA-27102: out of memory
Linux Error: 28: No space left on device
select TO_CHAR(systimestamp,'YYYYMMDD HH:MI:SS') from dual
ERROR at line 1:
ORA-01034: ORACLE not available
[... lots of ORA-01034 after that ...]
The css.log looks like this:
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
[ OCRUTL][16384]u_set_ocr_error: Parameter was NULL
2005-11-26 19:15:11.509: [ OCROSD][16384]utgdv:2:ocr loc file cannot be opened
2005-11-26 19:15:11.509: [ OCROSD][16384]utopen:1: Couldnt find ocr,[ocrmirror] location in config file
[ OCRUTL][16384]u_set_gbl_comp_error: Parameter was NULL
2005-11-26 19:15:11.509: [ OCRRAW][16384]proprinit: Could not open raw device
2005-11-26 19:15:11.510: [ default][16384]a_init:7!: Backend init unsuccessful : [33]
[ OCRUTL][16384]u_set_ocr_error: Parameter was NULL
2005-11-26 19:15:11.510: [ CSSCLNT][16384]clsssinit: error(33 ) in OCR initialization
LEM stack 1: error [clsdfopen1] [
LEM stack 2: error [clsdfgenfullname] [sclsdgcwd]
Ideas, anyone? Perhaps it's impossible to run XE on this kind of virtual machine...?
Stefan

Newb needs help w small office network setup

Just started a new job at small start-up company that needs their 6-7 macs and a couple of printers networked. I'm just a designer and I'm trying to help but I'm not familiar with osX networking and I hope someone could point me in the right direction. Currently the owner has DSL on all the computers so there is an ethernet cable in each one to a router or hub i believe.
Currently when I try to connect via Go menu to Connect to server, there is no list. If I type in the name of one of the other computers and try to connect I get:
"Connection failed. The server may not exist of it is not operational at this time. Check the server name or IP address and try again."
I don't really know where to start or what questions to ask but I hope having an ethernet cable system already in place is a good thing.
Your help appreciated

I'm starting out with 2 computers near me, G4 HOMER
and G4 MINI. Both are connecting to the net via
ethernet. Personal File Sharing is ON on both.
On G4 MINI, I can see G4 HOMER, but when trying to
connect (Go>Connect to server>G4 HOMER) get
"ConnectionFailed -Server may not exist or is not
operational"
when connecting ot the server try using G4-HOMER.local as the server address.

Small Office Network Setup Help

Hi folks,
We are renting a small office in a floor which consists of many offices. The way internet is distributed here is, they have a verizon fios router and a couple of unmanaged switch, from which cables are run to offices for internet. One of the port on a switch is dedicated to our office.
In our office we have 6 computers and a network printer. The computers need to share files with each other and be able to print.
We want to isolate our office network from others. When we use an unmanaged switch, the version router dhcp assigns ip addresses to computers and we are able to access the internet. The verizon local ip is: 192.168.1.xxx. But we can also see computers that are of other offices, which means they can see us.
How do we create a separate network? Say we want to use IP 192.168.10.XXX or 10.0.0.xxx. We just bought a 24 port managed (L2) switch.
Thanks

Hello, rjbm_exact.
You definitely need a managed switch and a Cisco Small Business (200 or 300 series) can meet your requirements. You can setup separate VLAN to segregate user access level. Are you also looking at expanding your wireless (guest access)?
Let me know if you need more assistance or e-mail ([email protected]) me directly. Kind regards.

Need help setting up a virtual switch setup for my lab.

Hi,
I used to be able to get this to work. But, I'm not able to anymore.
I have two network cards in my PC.
#1 Is what I use for everyday use and it's configured to use :
IP: 192.168.0.2
GW: 192.168.0.1
DNS : 192.168.0.1 (Router address)
#2 Is setup to use
IP: 192.168.0.3
GW: 192.168.0.1
DNS : 192.168.0.1 (Router address)
Then I create a Virtual Switch in Hyper V Virtual Switch Manager and bind it to Network Card #2.
This creates the Hyper V Virtual Ethernet Adapter that I bind my VM's to.
But for some reason none of my VM's can get a connection to the internet. There is an exclamation mark over the network icon.
When I go back and look at the TCP/IP V4 properties of the Virtual Ethernet Adapter, I release that it has no DNS settings.
But when I put any settings in there it gives me a warning about setting multiple default gateways, and do I want to continue, yes or no?
What could I be doing wrong?
Thanks

Hi midi25,
Then I create a Virtual Switch in Hyper V Virtual Switch Manager and bind it to Network Card #2.
This creates the Hyper V Virtual Ethernet Adapter that I bind my VM's to.
I think you checked the "Allow management operating system ..." , the new Vethernet adapter is a virtual adapter for HOST ( the name same with the Vswitch) .
So , the "multiple default gateway" will arise when you configure GW for it .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Question: I am basically a closed small offsetprinting company...in 2006 or so i bought CS2

Question:
i am basically a closed small offset printing company...in 2006 or so i bought CS2 and was using it
uptil about 2010..? Recently i have had need of photoshop and re-installed CS2 on my MacBook ,
(i uninstalled it cause i wasnt using it and it took up space). i installed it again i it keeps telling me i have to register it. I have used up my 30 days it gave me all the while trying to register and it would not take it. 30 days later and i cant do anything now. I contacted Customer service and they tell me it is registered and there shouldnt be a problem...I also told them it was originally registered under [email removed] but now i have my computer at home and i am using [email removed] which is current...They didnt have anymore answers and gave me this link for help...Thank you in advance
John
[ private information removed - see http://forums.adobe.com/docs/DOC-3731 ]

Error: Activation Server Unavailable | CS2 or older products, Acrobat 7
Mylenium

Company setup in CO

Hi Experts!
I am relevant new in this field and I would like to know how to setup a new company in CO. What steps should be definitely made? What setup should be done in IMG?

Hi,
The company is set up in FI only [Ent.structure->Fin.A/c->Define->company].In CO,this company is assigned to the Controlling Area,so that analysis,Reporting etc from the CO point of view will be possible.
To do this,use T code EC16 and create a controlling Area.In T/code:OKKP,assign the company code to this controlling Area.Now your comp.code is ready for CO analysis as mentioned in the above para.
Based on your requirements you can create cost elements,cost centers,order etc and begin the analysis.
hope this helps.
Regards,
Ramesh

Small Office Network Setup

Hello everyone! Pretty soon I will be starting a graphic design, video, and music production company with my brother and friend. All 3 sections will be using apple macs. I was just wondering if any of you can offer suggestions as far as networking hardware and software. Or any how-to-guides. I believe we will be using 7 plus macs and will need room for expansion. Also looking into getting the Xserve. Thanks for all your help!

I am no networking expert but I will tell you what we use for a 7-mac network.
Router: Linksys RV0041
Switch: Linksys Etherfast 3124 24-port switch (EF3124)
These work fine managing network traffic and have good enough throughput for our use. The router gives the network firewall protection but still allows access from the internet for one Mac we use as a web server and mail server.
Be sure you design backup into your network. You might consider using one Mac to run full time just to manage backup using Retrospect. Also make sure your rotate your backed-up files off-site periodically (for example to a safe deposit box). This means having at least two good-size external hard drives. Your whole new business will be on this network and you have to have not only an onsite backup for quick restore but also an offsite version in case your place burns down. This may sound extreme --but your new business will be out of business without secure backup.
G5 Dual 2.0 Mac OS X (10.4.4)
G5 Dual 2.0 Mac OS X (10.4.3)

Virtual Mail Setup - imapd-ssl error unknown protocol

Hi,
I have been relentlessly trying to setup my first email server and I think that I am almost there. I have been following the guide at:
https://wiki.archlinux.org/index.php/Simple_Virtual_User_Mail_System
I have followed it step by step and I'm 99% sure that I didn't miss a thing when setting it up.
However, I cannot login to my roundcube mail. It just times out.
This is the error that pops up in /var/log/mail.log:
mail imapd-ssl: couriertls: accept: error:140760FC:SSL routines:SSL23_GET_CLIENT_HELLO:unknown protocol
this is the contents of /etc/authlib/authmysqlrc:
##VERSION: $Id: authmysqlrc,v 1.20 2007/10/07 02:50:45 mrsam Exp $
# Copyright 2000-2007 Double Precision, Inc. See COPYING for
# distribution information.
# Do not alter lines that begin with ##, they are used when upgrading
# this configuration.
# authmysqlrc created from authmysqlrc.dist by sysconftool
# DO NOT INSTALL THIS FILE with world read permissions. This file
# might contain the MySQL admin password!
# Each line in this file must follow the following format:
# field[spaces|tabs]value
# That is, the name of the field, followed by spaces or tabs, followed by
# field value. Trailing spaces are prohibited.
##NAME: LOCATION:0
# The server name, userid, and password used to log in.
MYSQL_SERVER localhost
MYSQL_USERNAME postfix_user
MYSQL_PASSWORD *******MY PASSWORD*******
##NAME: SSLINFO:0
# The SSL information.
# To use SSL-encrypted connections, define the following variables (available
# in MySQL 4.0, or higher):
# MYSQL_SSL_KEY /path/to/file
# MYSQL_SSL_CERT /path/to/file
# MYSQL_SSL_CACERT /path/to/file
# MYSQL_SSL_CAPATH /path/to/file
# MYSQL_SSL_CIPHERS ALL:!DES
##NAME: MYSQL_SOCKET:0
# MYSQL_SOCKET can be used with MySQL version 3.22 or later, it specifies the
# filesystem pipe used for the connection
# MYSQL_SOCKET /var/mysql/mysql.sock
##NAME: MYSQL_PORT:0
# MYSQL_PORT can be used with MySQL version 3.22 or later to specify a port to
# connect to.
MYSQL_PORT 3306
##NAME: MYSQL_OPT:0
# Leave MYSQL_OPT as 0, unless you know what you're doing.
MYSQL_OPT 0
##NAME: MYSQL_DATABASE:0
# The name of the MySQL database we will open:
MYSQL_DATABASE postfix_db
#NAME: MYSQL_CHARACTER_SET:0
# This is optional. MYSQL_CHARACTER_SET installs a character set. This option
# can be used with MySQL version 4.1 or later. MySQL supports 70+ collations
# for 30+ character sets. See MySQL documentations for more detalis.
# MYSQL_CHARACTER_SET latin1
##NAME: MYSQL_USER_TABLE:0
# The name of the table containing your user data. See README.authmysqlrc
# for the required fields in this table.
MYSQL_USER_TABLE mailbox
##NAME: MYSQL_CRYPT_PWFIELD:0
# Either MYSQL_CRYPT_PWFIELD or MYSQL_CLEAR_PWFIELD must be defined. Both
# are OK too. crypted passwords go into MYSQL_CRYPT_PWFIELD, cleartext
# passwords go into MYSQL_CLEAR_PWFIELD. Cleartext passwords allow
# CRAM-MD5 authentication to be implemented.
MYSQL_CRYPT_PWFIELD password
##NAME: MYSQL_CLEAR_PWFIELD:0
# MYSQL_CLEAR_PWFIELD clear
##NAME: MYSQL_DEFAULT_DOMAIN:0
# If DEFAULT_DOMAIN is defined, and someone tries to log in as 'user',
# we will look up 'user@DEFAULT_DOMAIN' instead.
# DEFAULT_DOMAIN example.com
##NAME: MYSQL_UID_FIELD:0
# Other fields in the mysql table:
# MYSQL_UID_FIELD - contains the numerical userid of the account
MYSQL_UID_FIELD 5000
##NAME: MYSQL_GID_FIELD:0
# Numerical groupid of the account
MYSQL_GID_FIELD 5000
##NAME: MYSQL_LOGIN_FIELD:0
# The login id, default is id. Basically the query is:
# SELECT MYSQL_UID_FIELD, MYSQL_GID_FIELD, ... WHERE id='loginid'
MYSQL_LOGIN_FIELD username
##NAME: MYSQL_HOME_FIELD:0
MYSQL_HOME_FIELD "/home/vmail"
##NAME: MYSQL_NAME_FIELD:0
# The user's name (optional)
MYSQL_NAME_FIELD name
##NAME: MYSQL_MAILDIR_FIELD:0
# This is an optional field, and can be used to specify an arbitrary
# location of the maildir for the account, which normally defaults to
# $HOME/Maildir (where $HOME is read from MYSQL_HOME_FIELD).
# You still need to provide a MYSQL_HOME_FIELD, even if you uncomment this
# out.
MYSQL_MAILDIR_FIELD maildir
##NAME: MYSQL_DEFAULTDELIVERY:0
# Courier mail server only: optional field specifies custom mail delivery
# instructions for this account (if defined) -- essentially overrides
# DEFAULTDELIVERY from ${sysconfdir}/courierd
# MYSQL_DEFAULTDELIVERY defaultdelivery
##NAME: MYSQL_QUOTA_FIELD:0
# Define MYSQL_QUOTA_FIELD to be the name of the field that can optionally
# specify a maildir quota. See README.maildirquota for more information
MYSQL_QUOTA_FIELD quota
##NAME: MYSQL_AUXOPTIONS:0
# Auxiliary options. The MYSQL_AUXOPTIONS field should be a char field that
# contains a single string consisting of comma-separated "ATTRIBUTE=NAME"
# pairs. These names are additional attributes that define various per-account
# "options", as given in INSTALL's description of the "Account OPTIONS"
# setting.
# MYSQL_AUXOPTIONS_FIELD auxoptions
# You might want to try something like this, if you'd like to use a bunch
# of individual fields, instead of a single text blob:
# MYSQL_AUXOPTIONS_FIELD CONCAT("disableimap=",disableimap,",disablepop3=",disablepop3,",disablewebmail=",disablewebmail,",sharedgroup=",sharedgroup)
# This will let you define fields called "disableimap", etc, with the end result
# being something that the OPTIONS parser understands.
##NAME: MYSQL_WHERE_CLAUSE:0
# This is optional, MYSQL_WHERE_CLAUSE can be basically set to an arbitrary
# fixed string that is appended to the WHERE clause of our query
# MYSQL_WHERE_CLAUSE server='mailhost.example.com'
##NAME: MYSQL_SELECT_CLAUSE:0
# (EXPERIMENTAL)
# This is optional, MYSQL_SELECT_CLAUSE can be set when you have a database,
# which is structuraly different from proposed. The fixed string will
# be used to do a SELECT operation on database, which should return fields
# in order specified bellow:
# username, cryptpw, clearpw, uid, gid, home, maildir, quota, fullname, options
# The username field should include the domain (see example below).
# Enabling this option causes ignorance of any other field-related
# options, excluding default domain.
# There are two variables, which you can use. Substitution will be made
# for them, so you can put entered username (local part) and domain name
# in the right place of your query. These variables are:
# $(local_part), $(domain), $(service)
# If a $(domain) is empty (not given by the remote user) the default domain
# name is used in its place.
# $(service) will expand out to the service being authenticated: imap, imaps,
# pop3 or pop3s. Courier mail server only: service will also expand out to
# "courier", when searching for local mail account's location. In this case,
# if the "maildir" field is not empty it will be used in place of
# DEFAULTDELIVERY. Courier mail server will also use esmtp when doing
# authenticated ESMTP.
# This example is a little bit modified adaptation of vmail-sql
# database scheme:
# MYSQL_SELECT_CLAUSE SELECT CONCAT(popbox.local_part, '@', popbox.domain_name), \
# CONCAT('{MD5}', popbox.password_hash), \
# popbox.clearpw, \
# domain.uid, \
# domain.gid, \
# CONCAT(domain.path, '/', popbox.mbox_name), \
# domain.quota, \
# CONCAT("disableimap=",disableimap,",disablepop3=", \
# disablepop3,",disablewebmail=",disablewebmail, \
# ",sharedgroup=",sharedgroup) \
# FROM popbox, domain \
# WHERE popbox.local_part = '$(local_part)' \
# AND popbox.domain_name = '$(domain)' \
# AND popbox.domain_name = domain.domain_name
##NAME: MYSQL_ENUMERATE_CLAUSE:1
# {EXPERIMENTAL}
# Optional custom SQL query used to enumerate accounts for authenumerate,
# in order to compile a list of accounts for shared folders. The query
# should return the following fields: name, uid, gid, homedir, maildir, options
# Example:
# MYSQL_ENUMERATE_CLAUSE SELECT CONCAT(popbox.local_part, '@', popbox.domain_name), \
# domain.uid, \
# domain.gid, \
# CONCAT(domain.path, '/', popbox.mbox_name), \
# CONCAT('sharedgroup=', sharedgroup) \
# FROM popbox, domain \
# WHERE popbox.local_part = '$(local_part)' \
# AND popbox.domain_name = '$(domain)' \
# AND popbox.domain_name = domain.domain_name
##NAME: MYSQL_CHPASS_CLAUSE:0
# (EXPERIMENTAL)
# This is optional, MYSQL_CHPASS_CLAUSE can be set when you have a database,
# which is structuraly different from proposed. The fixed string will
# be used to do an UPDATE operation on database. In other words, it is
# used, when changing password.
# There are four variables, which you can use. Substitution will be made
# for them, so you can put entered username (local part) and domain name
# in the right place of your query. There variables are:
# $(local_part) , $(domain) , $(newpass) , $(newpass_crypt)
# If a $(domain) is empty (not given by the remote user) the default domain
# name is used in its place.
# $(newpass) contains plain password
# $(newpass_crypt) contains its crypted form
# MYSQL_CHPASS_CLAUSE UPDATE popbox \
# SET clearpw='$(newpass)', \
# password_hash='$(newpass_crypt)' \
# WHERE local_part='$(local_part)' \
# AND domain_name='$(domain)'
I have been reading around about that error to no avail.
i have extension=openssl.so uncommented in /etc/php/php.ini and round cube says my openssl is fine.
Any help would be much appreciated!
kush
Last edited by kush (2012-01-05 16:49:18)

Hey Kush I am having the same issue, did you ever get it working???

Virtual machine setup mini guide for thoes with XP or 7

Sorry this guide is very rough.
Why do we need this? Because application loader works only on mac. Not on PC. The final step to submit the application requires application loader. There is no way around it at the moment.
So you need to submit your app but you don't have a mac or money for a used mac. You can still submit but You will need the following
1. Retail DVD of snow leopard (ebay has brand new copies for $45 shipped)
2. computer with AMD or Intel CPU
3. about 20gig HD and 2gig ram
4. fast internet connection
5. a big cup of coffe
6. a gigantic bag of patience.
also needed
Latest Empire EFI boot discs, combo update 10.5.6 for snow leopard, usb flash drive, multibeast, vmware preconfigered files for snow leopard, xcode
all available if you just google them.
1. start download process on vmware workstation 7, combo update 10.5.6, EFI bootdisc for AMD or Intel, multibeast
2. install vmware, reboot. open up the vmware preconfigered files, make changes to HD and ram size. save it.
3. mount the EFI bootdisc in VMware, boot VM up, on the EFI boot screen, insert your Retail DVD and change the VM dvd drive to connect to your physical drive
4. hit F5, it should change the icon to MAC OSX INSTALL. Install Mac. configure it if you want. after install is finished, reattach the EFI bootdisc to boot your system. you willl not be able to boot without the bootdisc.
5. before it boots, shut it down and make a snapshot. when EFI boots up again, you will see your mac installation, select that and it will boot into mac desktop.
6. now copy multibeast, combo update, xcode on to your usb flash drive. then connect your flash drive with mac osx, copy all the files onto your desktop
7. open multibeast, don't install it, run combo update, then complete multibeast installation with Easybeast option
8. now reboot your VM, if everything works, shut it down and make another snap shot
9. install xcode! finaly! after xcode finishes installation, you are good to go.
couple of questions you might ask
1. how to copy files around xp and mac on vmware. My suggestion, don't invest time into connecting the computers. just use the flash drive.
2. must we always use the bootdisc to boot. No. You can find out how to resolve that. I just left it alone.
3. why not just use xcode to develope. Well, vmware is extremlily slow running mac osx.
4. finaly, vmware workstation 7 is trial version. Yes, you might be able to get the vmware player to run your vm after you finished the setup.
This guide might get removed by adobe. if it does oh wells. google is your friend.
if you still need help you can pm me. if i am not banned i suppose.

Sorry this guide is very rough.
Why do we need this? Because application loader works only on mac. Not on PC. The final step to submit the application requires application loader. There is no way around it at the moment.
So you need to submit your app but you don't have a mac or money for a used mac. You can still submit but You will need the following
1. Retail DVD of snow leopard (ebay has brand new copies for $45 shipped)
2. computer with AMD or Intel CPU
3. about 20gig HD and 2gig ram
4. fast internet connection
5. a big cup of coffe
6. a gigantic bag of patience.
also needed
Latest Empire EFI boot discs, combo update 10.5.6 for snow leopard, usb flash drive, multibeast, vmware preconfigered files for snow leopard, xcode
all available if you just google them.
1. start download process on vmware workstation 7, combo update 10.5.6, EFI bootdisc for AMD or Intel, multibeast
2. install vmware, reboot. open up the vmware preconfigered files, make changes to HD and ram size. save it.
3. mount the EFI bootdisc in VMware, boot VM up, on the EFI boot screen, insert your Retail DVD and change the VM dvd drive to connect to your physical drive
4. hit F5, it should change the icon to MAC OSX INSTALL. Install Mac. configure it if you want. after install is finished, reattach the EFI bootdisc to boot your system. you willl not be able to boot without the bootdisc.
5. before it boots, shut it down and make a snapshot. when EFI boots up again, you will see your mac installation, select that and it will boot into mac desktop.
6. now copy multibeast, combo update, xcode on to your usb flash drive. then connect your flash drive with mac osx, copy all the files onto your desktop
7. open multibeast, don't install it, run combo update, then complete multibeast installation with Easybeast option
8. now reboot your VM, if everything works, shut it down and make another snap shot
9. install xcode! finaly! after xcode finishes installation, you are good to go.
couple of questions you might ask
1. how to copy files around xp and mac on vmware. My suggestion, don't invest time into connecting the computers. just use the flash drive.
2. must we always use the bootdisc to boot. No. You can find out how to resolve that. I just left it alone.
3. why not just use xcode to develope. Well, vmware is extremlily slow running mac osx.
4. finaly, vmware workstation 7 is trial version. Yes, you might be able to get the vmware player to run your vm after you finished the setup.
This guide might get removed by adobe. if it does oh wells. google is your friend.
if you still need help you can pm me. if i am not banned i suppose.

Small virtual company setup

Similar Messages

Maybe you are looking for