Smartform for VT01N (Shipment) - Output type ALTR

Hi Experts,
We are currently on 4.7 version and in this version we dont have a Smartform for VT01N transaction.
Can somebody in higher version check if they have standard Smart form and driver program for this transaction.
Below are some details:
Transaction use to print: VT01N/02N
Output Type: ALTR (Shipment:general doc)
Thanks in advance.

by the way, you can actually migrate sap script to smart forms.
Refer:
http://help.sap.com/saphelp_nw04/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm

Similar Messages

Print program for the smartform for selecting the output type (email/fax)

Hi All,
Requirement :I have to create a print program for the smartform where the output type may be print out,email or fax ,so i need to put the condition for selecting the output type (like printout,email,fax).
can any body please let me know how to put the condition for selecting the desired output type ?
Thanks in advance
Rahul

Hi
It is not the output type that has to be changed
it is the MEDIUM which you have to change and configure
for printout medium is 1
for FAX medium is 2
for MAIL it is 7.
so instead of printout change the medium to 2 or 7 for the same output type and attach to the same driver program and smartform/form.
Reward points for useful Answers
Regards
Anji

Default shipment output type for customer

HI ALL,
I have 2 shipment output type. is it possible to assign one of them to the specific customer.
Thank you & best regards,
Saiful arif

Dear Arif ,
This is possible through standard SAP . Please note as given below :
1. In customer master sales tab --> Additional data , where u have some blank fields , select one of the field for this purpose and mark this field only for special customer indictor .
2. Then Add this filed in one of the access of the out put .
3. Maintain out put records for this access .
4. Create sales order for this special customer , the out put is populated in the sales order.
Sorry , i am not able to give example of the field in customer master which can be used as i am not have access presently .
Try this out ans let me know if you have any problems
Regards
Veera

Smartforms for the shipment (vt01n)

Hello,
Someone, does exist smartforms for the shipment (vt01n)?
Thanks in advance!
XeviG.

Hi,
Below are the forms available for shipment
Program          -         RV56TD00
Form Routine    -          ENTRY
Form                 -     SHIPMENT_DOC
kapil

Debugging the program that will get triggered for a particular output type

Hi all,
I have one program,which will get triggered when a Sales order of type 'VOR' is created.Whenever 'VOR' order is created it will trigger the 'ZALT' output type.And this output type 'ZALT'has been configured to my program.This output type configuration has been set up by my functional consultant.
My problem is I created Sales order of type 'VOR'.But I want to debug my program,which has to be triggered because of that 'VOR' sales order type,which in turn triggers 'ZALT' output type and in turn triggers my program.
My problem is I created Sales order of type 'VOR' by keeping debugging point in my program.But it is not going to my program and simply displaying sales order has been saved.
So is the outtype has been configured properly?.Do I need to go to my functional consultant?Could anyone explain in this regard?
Rgds,
Balaji

Hi Balaji,
If possible, try to repeat the output in the output type messages screen of VA02 and change its dipatch time to '1'(Through further data). Now put the break point in the program assigned to output tye 'ZALT'(You can see this in the TNAPR table) and run the program RSNAST00 through SE38. The program will stop at the break point.
If its not possible to repeat the output and if you want to check it the first time the output type is processed, ask the functional consultant to change the dispatch time in the condition record that is being retrieved for proposing the output type to '1'. Now run RSNAST00. The program will stop at the breakpoint.
Thanks,
Vinay

SHIPMENT OUTPUT TYPE AUTOMATICALLY NOT DETERMINED

DEAR SAP Gurus,
I got one issue i.e in shipment document the output type is not determined automatically.I checked the config settings , everything is ok and condition records are already maintained. Pl resolve this ASAP . I need to close this issue in 2 days..
Thanks in Advance...
Regards,
Rafiq

hi,
You will resolve it following this:
o Start Transaction VL10CUC ("Parameter per Profile in Delivery
   Process") in the change mode.
o Goto the detail screen of profile '2000'.
o Check the status of parameter 'No OutputDet.' and correct the
   setting of the parameter:
   - If parameter 'No OutputDet.' is active, the output
      determination is not executed for the process.
   - If parameter 'No OutputDet.' is not set, the output
      determination is executed for the process.
Regards,
david

Need to call another progarm in Zdriver program for a specific output type

For billing document they had configured a Zdriver program and Zsmart form in Nace.
Now, we had created an output type and when user clicks on that specific output type my ZXYZ program should run.
ZXYZ program will convert the spool request into .pdf files.
So what I had done is I have given a condition in Zdriver program saying that If output type is ZD0p.
Submit ZXYZ program so that this program will automatically run.
I just want to make sure that is it the right way I mean shoudl I add something else to the Submit statement...here
and can any one tell me how can I generate spool request by giveing a billing document number in VF02--> Click on Enter > Click on Header>Click on Output-->Enter the Output type and give the communication method details and click on Save...will this generate the spool request..?

Hi
and can any one tell me how can I generate spool request by giveing a billing document number in VF02--> Click on Enter --> Click on Header-->Click on Output-->Enter the Output type and give the communication method details and click on Save...will this generate the spool request..
After doing the whole porcess...re enter the vfo2 transacrion, give the document number and in Menu..Under "Billing Document"..Select issue output to...and there select the output type..and select Print button, it will generate spool request.
Regards,
Vishwa.

Configuration output type for VL02N - creating output type

Dear Sapguru,
I want to configure output type for VL02N transaction for IDOC creation,Here scenario is to connect SAP to third party system in IS retail.
VL02N- Output type configuration In only return delivery case.
Can anybody guide step by step cycle configuration for output type.Looking forward for your quick reply.
Note: Output type required for IDOC,to communicate with third party system,not for print function.
Thanks.

Dear Anup,
If my understanding is correct,
This seems to be a outbound Idoc scenario where Idoc will be sent by SAP to third party for a return delivery notification.
Output type configuration steps are as follows :
1) Identify the standard output type (Application - V2, Transmission Medium - 6 ) for e.g. LAVA which is very close to your requirement.
2) Use this output type as a reference & create a copy output type of your own.
3) Use a suitable access sequence or create your own access sequence as per your requirement.
4) Assign access sequence to the output type.
5) Maintain output determination procedure (connect your output type to a suitable procedure )
6) Assign output determination procedure. (to your delivery document type)
7) Maintain required output condition records through T Code - VV21 against your newly created output type.
8) Set up the partner profiles as per your requirement (T code - WE20)
9) Check the reflection/ effects of your new output setup at the delivery document level (VL02N).
You may quickly access these settings through T codes - NACE.
Tables - TNAPR, NAST
Hope it will help you in the set up.
BR,
Anubhav

No condition maintained for Order Confirmation output type but still active

Hi,
I have NOT maintained any Condition record for Order confirmation Output(BAFX) but still it is generated and Fax instruction is being sent to the Sold to Party. Also i found that NO condition record for Order confirmation output(BA00) is also maintained but still Order confirmation is still being triggered.
Actually i want that NO Fax instruction is to be sent for Order confirmation for some of the customers.
Kindly advise.
Thanks,

Hi vk@sap,
Check in the output analysis how the output was determined, so that you can know why they're still determined.
Thanks,
Mariano.

User exist for controlling the OutPut type in sales order

Hi
Is their any exist which controls the output type based on header data of the order? VA01/02.
Best regards
Satish Kumar K

Hi,
IN the VOFM routine you can use the structure KOMKBV1 which will be populated with the sales org (VKORG), division (SPART) and order type (AUART).
Example
SY-SUBRC = 4.
IF KOMKBV1-VKORG = '0001' AND
KOMKBV1-SPART = '12' AND
KOMKBV1-AUART = 'ZXXX'.
SET THE return code to 0 to propose the output type.
SY-SUBRC = 0.
ENDIF.
Hope this helps..
Thanks,
Naren

Table for Sales Order - Output Type - Processing Check

Hi all,
We have around 300 Sales Order, where we need to check weather Sales Order Acknowledgement (Custom) Output Type is processed or not?
With the help of condition record setup we beleive all the Sales Order have got the output type assigned, but we need to know, is there any way from any SAP table, we can check the output is processed or not.
Also, let me know is there any way some table can we check, all the sales order have got the output type assigned?
<Text removed by Moderator. Priority normalized.> Please help.
Thanks
RS

You can use Table NAST.
Field
Field Desc
Reference
KAPPL
Application
Application type
V1 - Sales
V2 - Shipping
V3 - Billing
OBJKY
Object key
Sales Order - Header Output
Sales Order + Item - Item Output
KSCHL
Message type
Output Type
PARNR
Partner
Customer Number
PARVW
Partner Role
Partner Function - SP
NACHA
Transm. Medium
MANUE
Msg. manually
DATVR
Processing date
UHRVR
Processing time
USNAM
User name
VSTAT
Processing status
LDEST
Output Device
TCODE
Communication strategy
OBJTYPE
Object type
BUS2032 - Sales Order
LIKP\LIPS - Delivery-Header\Item
VBRK\VBRP - Billing-Header\Item
Thanks, JP

Calling Multiple forms for a single Output Type in Smartforms

Hi SAP Gurus..
I want to call 2 smartforms simultaneously for a Single O/P type.
But the problem is that My Driver Program in Standard. I cannot edit the Driver form. Whatever I need to do I can do it only in the Smartforms.
Please help me out in this....

I guess the better way is to customize your print program. I am not sure whether there are any other alternatives for doing this.
Rgds,
SaiRam

Smartform for EWM Shipment

Hi,
I am new to SAP EWM.
How to check for the smartform in EWM for shipment i.e. t code /SCWM/TU.
My requirement is to create a Smartform and assign it at the time of 'Check out', after the delivery is assigned.
I also wanted to know whether there is any Driver Program for Shipment BOL Smartform.
ReGaRdS,
Dinesh

Hi Suraj,
Thanks for helping!!!
Now i have understood that there are 6 different parameters to trigger the smartform and the details are available under the item tab named 'PPF Action'.
I have the following issues:
1. I am not able to trigger the custom action definition. How to do that
2.And how to configure it to just trigger the custom action definition.
I added one more step in existing Action Definition which was getting triggered.(Earlier this Definition was just triggering‘External Communication, Now it has been set to ‘Print’(processing Type).
Now print is getting triggered but it gets failed as
3. Am i suppose to use any Badi to trigger the smartform.
Kindly let me know how to proceed with the code, i have created a Z' class copying the existing class CL_SF_PROCESSING_PPF and copied only one method available in it EXEC_SMART_FORMS. Now how i have to proceed.
Regards,
Dinesh

User exit or BADI for determining the output type inme21n orme22n

hi all,
i have used the user exit 'exit_sapmm06e_012', it is getting triggered in me22n, i am able to check whether the vendor email id is present or not, but this is happening all the time that is even when the user dont want to send a email to the vendor i.e. he just wants to print the purchase order, even at that time this user exit is getting triggered and giving a message that the vendor email id is not maintained.
the reson why this is happening is there is no import parameter to this user exit which gives the "medium of data transfer" the user has entered. if i get this parameter visible inside the user exit, then i can check this parameter inside the user exit and do the required operation. i checked up with all the user exits in "me" package and even the other related packages but none of them is getting triggered,
do antone know a user exit or badi which imports this parameter and also gets triggered at the time of creation of purchase order.
plz give me a solution.
regards,
santosh.

Hi Santosh,
Why not continue the other post ?
Anyway, i am not sure to understand your requirement.
Do you want to check that vendor email exist and issue a message only if email is not available ?
Kind regards,
Yann

How to modify inbuiltsap smartform for invoice.

please provide me the steps

Hi
Welcome to SDN forum
see the std Invoice Smartform for Invoice
INVOICE
Output type : RD00
ScriptForm Name : RVINVOICE01
Driver Program Name : RVADIN01
smartform name : LB_BIL_INVOICE
Smartform Driver Pgm: RLB_INVOICE
goto tcode SMARTFORMS
copy the above smartform into ZFORM
and do the changes as per your requirement
then attach the same in the NACE tcode against the same Driver program.
then execute the Output from VF02 Tcode
by entering the Invoice no
Reward points for useful Answers
Regards
Anji

Smartform for VT01N (Shipment) - Output type ALTR

Similar Messages

Maybe you are looking for