Smartform_header event for table

Hello All,
In a smartform, I have header event for a table and this event has to get triggered at the start of the paragraph and at the page-break.
The problem what i face is,
when the paragraph(table) get printed exactly at the start of the page(second page), header event for the table get triggered twice(one for start of the paragraph and the second for page-break) and print the header twice.
Can you help me out.
Regards,
Subramanian.

hi,
Just double click on the header node of the table node.
And just check in the right side output options tab whether under the print time
both the checkboxes are checked .
Both should be checked . then only you can get the desired reault.
Regards,
Guru

Similar Messages

Event for Table rows deselection

Hi Guys,
I have created a Table and created a method for event 'OnSelect'.I am capturing row values into an internal table when user select a value from the table.Here my problem is once deselected after selecting the row ,the selected data is still appearing in the internal table but deselected value should get deleted from the table.How it can be acheived.Is there any event for deselection.
Thanks
Nandana.

Hi nandana,
If i am understanding your query correctly, on Row select you are appending the row value to an internal table.
Now on deselect you want the row to be removed.
So do one thing in that event method before appending the row into table check if the row value previously exist.
If it exist then remove the row from internal table otherwise append it into the table.
Check it works or not.
If it is not working with onSelect event try to use onLeadSelect event.

How to set fire action event for particular rows in a table

HI All,
I have a requirement in which I want to set fire action event for particular rows in a table based on some condition.
The table has columns like fullname,employee id etc.
So i want to set fire action event for particulars rows only which will saisfy some condition.

Atanu,
Your approach(setting fire action for few rows) seems not possible. Better to go ahead with workaround.
Do you want this functionality in processRequest(while page loading) or processFromRequest(on some event) method ? Give more explanation regd. your requirement ?
In either case loop through the rows and when your condition is met write the action to be performed in controller.
Regards,
Anand

How to create events for Z table ?

Hi Experts,
Can anybody tell me how to create an event for Z table. I have a Z table in that a Particular filed is there as BELNR.
This Table is being getting updated by various application & even with the User-Exits also. I want to sned an e-mail whenver this particular field is getting updated by any program.
how to do this? which event to be used for a particular field?
Pl. Help....
Regards,
Umesh

Umesh,
I hope below method will help solving the requirement:
-Changes made to the keydocuments are recorded in the change document
Header table i.e. CDHDR and Item table CDPOS, Additional change
pointers are written in the BDCP and BDCPS tables. (BDCP and BDCPS in your case)
-A standard program RBDMIDOC is sechuled to run on periodic basis to
evaluate the change pointers for a message type and starts the ALE
process for distributing the Masterdata to the appropriate destination.
-'Object' is collection of fields of different database tables. T.code
for creating an object is SCDO.
Also:
1. BD61 Active change pointers generally
- Check the checkbox "Change pointers activated -generally"
- Save it
2. BD50 Active change pointers for Message Type
- Message Type Active
Thanks,
Preyansh

Logic regarding EVENTS OnFilter and OnLeadSelect for table ui element

provide me logic regarding EVENTS OnFilter and OnLeadSelect for table ui element for webdynpro abap application.

OnLeadSelect - What kind of logic do you want? There are many different things that you could do inthe OnLeadSelect
onFilter- Generally you use IF_WD_TABLE_METHOD_HNDL~APPLY_FILTER to perform the filter operation.
In the onFilter itself you probably just have one line of code:
wd_this->table_method_hndl->apply_filter( ).
In your WDDOMODIFYVIEW you probably have this code to capture the table_method_hndl object:
if first_time = abap_true.
* Get reference of the table view element
l_table ?= view->get_element( 'TABLE' ).
* Get reference to the Filter & Sorting API
wd_this->table_method_hndl ?= l_table->_method_handler.
endif.

Can you please help me with validation logic for Events in Table maintenance generator

Can you please help me with validation logic for Events in Table maintenance generator,i.e if i enter record in 1st internal table then automatically 2nd internal table should be updated.

Hi Glen Anthony,
Thanks for replay,
I used foreign key relationship between those 2 internal tables....
I used event 05: When creating a new entry. I want to know the custom logic by which my 2nd Internal table gets automatically updated when i update my 1st Internal table
Thanks Glen.

How to create event in table maintenance generator

Hi guys,
I need to create an event for my table maintenace generator such that when the field land1 is filled, the landx field should take its data from t005t table. and the ladnx field should be display only, it can not be modified in table maintenance.
How can i create an event in table maint. gen? How am i going to do it?
thanks always,
mark

Hi,
As mentioned in the last post go to the event screen by
Environment --> Modifications --> Events.
There you click on new entries and try writing your logic for event 21 i.e. after selecting 21 give some name of your event and write down the logic how you want to do this.
If event number 21 does not work then try 1. One of these two should work.
Hope this helps!!!
Regards,
Lalit

How to Create Event polling table

hi,
1)How to Create Event polling table
2) wahts RPD stands for.
3) when we are prefer Dynamic variables.
thanks.
raj

1) http://obiee101.blogspot.com/2008/07/obiee-managing-cache-emptyingpurging.html
2) Repository Project Design ?
- More than likely the extension RPD was not used by anything else when Siebel Analytics first started using it, no doubt the 'RP' is repository, so use 'Definition' or 'Design' as you like. Im pretty sure there is nothing in the documentation but i've not checked, maybe you could check and let us know?
3) Dynamic variables would be something like 'CURRENT_MONTH' where the same query does not need to fire per user (ie SESSION variable) but needs to be periodically refreshed. Another use of you dynamic variable might be 'LAST_ETL_DATE' or somethng similar which might implement with your event polling table. By including the Variable within a Business Model, all cache for the Business Model is purged whenever the Variable's value changes.

How to create EVENTS for a View Cluster.

Hi Tech Gurus,
I have created a view cluster on 5 tables. I need to do a validation and this can be done by using events. But i am unable to create a EVENT for the View Cluster. Could anyone please tell me how to create events for a View Cluster.
Thanks in advance for your esteemed replies.
Regards,
Raghavendra Goutham P.

Hello Pasapula
When you are in the View Cluster maintenance dialog (SE54) click on dialog "Events".
Below the field for the view cluster you have an additional field FORM routines main program. There you have to add the main program containing the FORM routines called by the VC events.
For example: I had defined a normal report containing an include with all the FORM routines. The report contains only the following lines of coding:
report zus_0120_u1.
* Common Data und access routines for user exits in VC maintenance
include LSVCMCOD.
include zus_0120_f1. "FORM routines for VC events
Now in the "Events" dialog of the view cluster maintenance you assign your FORM routines to the events.
Regards
Uwe

Some records stays in Event Polling Table forever and ever

I have configured Event Polling Table at Oracle BI. It works fine and the entry cache are purged. But some records stays in EPT table for ever. Records without misstat1 are inserted by me (trigger). Records with OTHER=misstat1 are inserted by BI Server. There is no delete or error statement in log file for this timestamp. Other timestamps are deleted by BI Server.
+++Administrator:fffe0000:fffe0012:----2008/09/22 22:17:58
-------------------- Sending query to database named misstat1_db (id: <<127983>>):
insert into
 BI_EPT("UPDATETYPE", "UPDATETIME", "DBNAME", "CATALOGNAME", "SCHEMANAME", "TABLENAME", "OTHER") values (1, TIMESTAMP '2008-09-22 22:08:24', '', '', '', 'MV_E_DENIK_KP', 'misstat1')
UPDATETYPE UPDATETIME DBNAME CATALOGNAME SCHEMANAME TABLENAME OTHER
1 22. 9. 2008 22:08:24 MV_E_DENIK_KP misstat1
1 22. 9. 2008 22:08:24 MV_E_HIM misstat1
1 22. 9. 2008 22:28:19 MV_ODY_OSCI_VYROCI misstat1
1 22. 9. 2008 22:28:19 MV_ZPC_CERP misstat1
1 22. 9. 2008 22:08:24 MV_E_DENIK_KP
1 22. 9. 2008 22:08:24 MV_E_HIM
1 22. 9. 2008 22:28:19 MV_ZPC_CERP
1 22. 9. 2008 22:28:19 MV_ODY_OSCI_VYROCI

UpdateTime needs to be unique, but you can't put a unique constraint on it. As you probably know, the server will insert a nearly identical record (it will just put text in the OTHER field but everything else will be the same). Then it deletes both records. However, in your case it looks like there are some identical timestamps that are not just duplicates from the server's insert. If you make sure you don't have any identical timestamps in UpdateTime, I think it will work correctly if everything else is configured correctly.

Looking for table that links a PM Reservation to a MM Purchase Requisition

Looking for table that links a PM Reservation to a MM Purchase Requisition

Hi,
Typically the way most SAP systems are configured, there are two scenarios here:
1. The component reserved in the PM order is item category 'N'. This is a non inventory item and must be directly procured for consumption against the PM order at the point of goods receipt. In this case no reservation is created and instead a requisition is directly created (in table EBAN) and the requisition is account assigned directly to the PM order (in table EBKN - field AUFNR).
2. The component reserved in the PM order is item category 'L'. In this case no requisition is directly created, instead a reservation is created against the item in stock (in table RESB). If there is sufficient stock of the item already then the item is consumed when it is goods issued to the PM order from stock using MIGO and there is no requisition created. In the event that there is not sufficient stock of the item for the reservations that exist, when MRP is run, a requisition will be created to replenish the stock, but this requisition will not be assigned to a specific PM order as it could be replenishing stock of the item for several reservations which are all for different orders. So in this scenario there is no direct link from the reservation generated by the PM order to the requisition.

Terminating Event for BUS2017 Custom Method

Dear Experts,
I have an issue with the Terminating Event of the Workflow for BO : BUS2017. The event is getting triggered but receiver is not being picked.
I have created two events GR_103 and POST_105 in the Custom BO ZBUS2017 by delegating it to BUS2017. GR_103 is the triggering event for my workflow which I have triggered in the POST_DOCUMENT Method of the Implmentation for BADI : MB_MIGO_BADI.
GR_103 is triggered while doing MIGO (Goods Receipt) for Movement Type 103. My Workflow is triggered perfectly and then I have used a Dialog Asynchronous Task in which I have called the MIGO Transaction for Releasing the GR Blokced Stock using the Movement Type 105. I have created a Custom Method POST in the BO ZBUS2017 and I have used the FM: MIGO_DIALOG to call the MIGO. I am trying to raise the POST_105 event in the Method MB_DOCUMENT_BEFORE_UPDATE of the Interface IF_EX_MB_DOCUMENT_BADI. I have defined the Terminating Event for the asynchronous Task as POST_105.
Now the event POST_105 is triggered, but SWEL says 'No receiver entered'. Even the SWEINST shows the object data as the current Work Item along with Object Key, but still receiver not picked. When I try to trigger the same event in a test report by using call transaction, then the event triggers and work item gets completed without any issues.
Please advise.
Below is my terminating event code.
READ TABLE xmseg INTO wa_mseg INDEX 1.
CONCATENATE wa_mseg-mblnr wa_mseg-mjahr INTO l_objkey.
IF wa_mseg-bwart = '105' .
    CALL FUNCTION 'SWE_EVENT_CREATE'
      EXPORTING
        objtype           = 'BUS2017'
        objkey            = l_objkey
        event             = 'POST_105'
      EXCEPTIONS
        objtype_not_found = 1
        OTHERS            = 2.
ENDIF.
Regards,
Raju.

Have a COMMIT WORK after the function call. (At least test it - I am not sure if it will have some effects in your BADI - at least you will know whether the issue is about missing commit).
And please use SAP_WAPI_CREATE_EVENT instead of the old function you are using.
Also, make sure that the events will look exactly the same in event monitor SWEL when triggered from your code and when using test tool. Maybe there is some minor difference/mistake (object key, etc.) that you haven't noticed.
Regards,
Karri
Edited by: Karri Kemppi on Feb 7, 2012 8:14 AM

Event Pooling Table doesn't work

I have created Event Pooling Table and registered it. When I insert correct name into field TABLENAME nothing happens - when I look at BI Administrator - Manage - Cache - the table still has entry in cache (and record is deleted from EPT table). When I insert incorrect name info field TABLENAME, I can see message in errorlog (The physical table misstat1_db::MIP:MV_E_HIMA in a cache polled row does not exist.) and I suppose that it is working. But cache not purged.
Can you someone tell me why?
Thx.

Hi,
Stale cache entries are purged automatically at the specified polling intervals. As your saying record has deleted, it means that polling has occured.
Are you sure that the cache entry you are looking at is the same table which has been modified?
If possible, not a solution just for debugging, try to create sample request in Answers and check whether it's been changing when the table get modified.
-Vency

Writting Events for TableView Buttons

Hi SDN,
I created a table view in a jsp dynpage which has one of the columns type as button.i got it by using "setColumnType" attribute of tableview.
now i want to fire server and client events onclick of those buttons.how to achieve it? can we write client and server events for those buttons as like normal buttons.
if yes tell me how and where to write?
explain me with example (coding) if possible.
Thanks & Regards,
Art.
/points will be rewarded/

Hi Subathra,
Thank you for ur reply.i know that we can achieve it using "setOnCellClick " but i want to know whether we can use the normal attributes of a button for this button placed in a cell of a tableview.
if yes how to use it.is there any relation between cell renderer attribute and my requirement.
Note:
you can share ur ideas about other components also which can be used in a tableview (inputfield,link,image...) and writting events for those components.
Thanks & Regards,
Art

FI - BTE events for transaction F110

Hi all,
I'm quite new to the FI module and have a question regarding Business Transaction Events. I tried by searching the forum but haven't found exactly what I was looking for, so if someone could help me out I'll be forever thankful!
The problem is the following: when I create a new customer invoice I fill in various fields, and 2 of them are: Assignment number and Document header text (ZUONR and BKTXT respectively). After saving, if I go to FB03 and view the doc number I just created, I can see these two fields (and they also appear in their respective tables). However, the issue I have is that when I execute transaction F110 for the customer I created and run the payment, I get a new document number (which is basically a copy of the first) that doesnt have these fields informed with the original values. Therefore, my aim is to code in some type of user exit / BTE and transfer the values to the new doc. Does anyone know what event I could use or how this could be approached?
Any help would be of use, thanks in advance!
Adi

Use event for F110 is 00002040. Use T-Code BERP - to activate this FIBF, you need put in Vendor Master Data communication type SMTP, when run F110 the program dispach PDF attached to email.
Step 1 - T-Code BERP to find 00002040 This is a Function called SAMPLE_PROCESS_00002040, copy with another name i.e. ZZZ_PROCESS_00002040
Step 2 T-Code FIBF -> Option -> Product -> .a Customer, Write product name at your choice (for example ZMAIL), make sure the put this active.
Step 3 T-Code FIBIF -> Option ->Process Function (or Module) -> . A Customer.
Process = 00002040
Module Function = ZZZ_PROCESS_00002040
Product = ZMAIL (name of product define by you in stpe 4)
hope this will help

Smartform_header event for table

Similar Messages

Maybe you are looking for