SMARTFORMS :How to print an inernal table inside a template cell?

Hi all,
I have a smartform which contains a template.
I want to print inside a cell of the template the content of an internal table.
Is this possible ?if yes , how to do that ?
Thanks.

Yes, it is possible.
Create inside your template a loop. Then create inside a text which you address as i.e. row 1, column 1 of your template (cell address).
Now when looping through your table it will place all data in some work area .i.e wa. In your text provide name of the components you want to dispaly i.e. &wa-comp1&.
Please note, that length of your template must be long enought to fit all tables entries.
Regards
Marcin

Similar Messages

Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)

Reporting Services - How to open a second table inside report, for each number of client (each apears in first table)?
Exemple:
Table1
Cliente name:
John
Client number:
12345
Survay number of negative answers:
3
Table2
Questions and answers that were negative:
Question: How much time where you waiting
Avaluation: 3 (from 1 to 10)
Answer: They only called me 1 mouth later
Can you please help me?

Hi,
Based on the description, I understand that you want to add subreport in the main report. When previewing the main report, the subreport can be shown in detail. Please see the screenshots on my test:
In Reporting Services, we can create parameters and pass them from main report to subreport in order to control the data dynamically.
References:
Subreports (Report Builder and SSRS)
Add a Subreport and Parameters (Report Builder and SSRS)
If I have any misunderstanding, please feel free to contact me.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

How to use one hash table inside another hash table

Hi everyone,
Any example of hash table inside another hash table.
Can one here help me how to write one hash table inside another with repeating keys for the first hash table.
Thanks,
kanty.

Do you mean you want the 'value' entries in a hash table to themselves be hash tables? Easy but this often indicates a design flaw.
Hashtable<String,<Hashtable<String,Value>> fred = new Hashtable<String,<Hashtable<String,Value>> ();But what do you mean by "with repeating keys for the first hash table"?
Edited by: sabre150 on Jul 2, 2010 10:11 PM
Looks like you have already handled the declaration side in your other thread. I suspect you should be writing your own beans that hold the information and these beans would then be stored in a Map. The problem I have is that your description is too vague so I can't be certain.

How to print a Movie clip inside uiLoader?

Hi,
I;m making a flash application in AS3, and I've got a little problem.
Which is here...
Here is my code....
/* Print Button Function Here.....*/
print_btn.addEventListener(MouseEvent.CLICK,printPage);
function printPage(evt:MouseEvent) {
    var printJob:PrintJob = new PrintJob();
    if (printJob.start()) {
        if (uiLoader.source.width>printJob.pageWidth) {
            uiLoader.source.width=printJob.pageWidth;
            uiLoader.source.scaleY=uiLoader.source.scaleX;
        printJob.addPage(uiLoader.source);    <------------ Error shows Here
        printJob.send();
Actually I have a movie clip which contains a Print Button and a uiloader.
uiloader loads differnt external movies.
I applied a code to Print button to print those movies.
But FlashProgram shows an error.
which is Here....
Scene 1, Layer 'Actions', Frame 2, Line 174
1118: Implicit coercion of a value with static type Object to a possibly unrelated type flash.display:Sprite.
Please tell me how to fix it.
thank you...

Thank you very much it's been really helpfull.
Now it's working but there are two more issues which i want to dicuss now.
1st issue is, it print the both movies (main movie & external both) but i only want to print that one which inside the uiloader only.
2nd issue is, actually this application which I'm making is for users to apply various paints on roofs and walls to check how they looks.
The issue is it only print the actual movie colors not those colors which have been currently applied. Or what i'm trying to say is that, " how can I print uiloader source movie with it's current colors settings?"
thank you.

How Create a Global Temporary Table inside a Stored Procedure?

Hi...
I need to create a Global Temporary Table inside a Stored
Procedure....
I have no idea how to do that....
Please....if u can send me a sample, send to me....
Thanks a lot

there are many ways to do this..
one u can use dbms_utility package to run ddl statements like
for ex:
declare
t varchar2(200):='order_no';
v number;
begin
--dbms_utility.exec_ddl_statement('select '||t||' into '||v||'
from
--ordermaster where rownum=1');
dbms_utility.exec_ddl_statement('create table cvt(t number)');
dbms_output.put_line(v);
end;
but the actual method(recommended) involves a bit coding using
dbms_sql package you will find examples on technet or metalink
to use this package..
I hope this helps
Narendra

Smartforms - How to print an image in backgroud ?

Hello,
I have to print some orders in development and quality system, so to avoid that some people can think that
is a production order, I have to print also a big image in background (DEV for Development, QAS for Quality).
Do you have some idea ? How to print a big image on background ?
Tks,
bye.

Hi Roberto,
To determine the logo dynamically, you need to click the traingular or arrow button which stays right beside 'NAME' where you select the backgroung picture.
Once you select the arrow button, the F4 help will be removed and you can enter variable into that field.
Regards,
Swarna Munukoti

SMARTFORM: How to print on document per row in an internal table

Hi.
I have created a SmatForm that is a one-page document to be printed once for every row in an itab I'm sending it via the Table Interface.
I hope I didn't waste my time designing this form but I created several Windows for each section (header, recipient address, summary of coverage, detail coverage information, disclaimer, etc.). I arbitrarily chose the header window as the "main" window (mainly because I couldn't find out what the difference between the different choices was). I've got the form laid out exactly how I want it.
If I test the SmartForm and pass in 2+ records via the test screen only the first one prints.
I thought about trying a LOOP but since you have to place the text within the loop that means all the Windows I have defined won't "get" any of the data.
I thought about looping in the driver ABAP program and just calling the SmartForm once per row but that seems horribly inefficient.
PLEASE HELP! Can I salvage what I've done already?

Valter:
OK. I'm trying this and running into a snag.
In the Form Interface section I have a table interface parameter defined as this:
P_CERTIFICATES_IN TYPE ZBNTT_LIFECERTIFICATE
next I declared a variable named "IT_CERTIFICATES LIKE LINE OF P_CERTIFICATES_IN" in the "Global Definitions" section and on my LOOP element (under my new MAIN window) I have "[X] Internal Table" checked and
"P_CERTIFICATES_IN" "INTO" "IT_CERTIFICATES"
but the compiler says "Global Definitions Field "P_CERTIFICATES_IN" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement . . . . . .".
Why can't the Smartform "see" P_CERTIFICATES_IN?

How to print grandtotal in table footer only in the last page in SMARTFORMS

Hello Experts,
How do I print the GRANDTOTAL in the table footer only on the LAST PAGE in SMARTFORMS.
What I have done is in the text element of CELL1 of the table footer i wrote the folowing logic but not working.
/: IF &SFSY-PAGE& EQ &SFSY-FORMPAGES&.
* V_SUM.
/: ENDIF.
I even tried this.
/: IF &NEXT-PAGE& EQ 0.
* V_SUM.
/: ENDIF.
but still it displays the grand total on all pages at table footer.
How do i go for this experts.
Regards,
Ranjith N

HI Nambiar,
To print the grand total only on the last page then create the secondary window --> create the text node for the grand total -->In the condition tab check only after the end of the main window.
This grand total will be displayed after all the items and end of the main window.
Footer in the table displays as the subtotals i.e on every page total is displayed..
Regards,
Sravanthi

Smartforms how to print Table rows on to the next page automatically

if this question is answered pls point to the the link
SMART forms:
layout : Half of my A4 page is filled with templates, a small portion is footer, the middle portion is Table.
Note: i have set the condition for the footer as (tick the check box) "only after end of main window"
Output:
                   the template is displayed the table is populated on the first page, no footer on 1st page,
                on page 2 the table rows are printed (table rows were a lot) and finally footer got printed every thing as per normal
what i want is:
                 instead of the table lines printed in the middle of page 2 (bcz my main window table is in the middle, top is templates)
                 i want the table lines (after filling the main window table lines in the 1st page) to continue to print from the
                 top of the page on page 2 and immediately after the table rows finish. footer must be printed....
what should i be doing to get this output

dear bob,
yes i have done that already as u said, when i do it......
i created a new page (next page) directed first page to next page
on the next page my layout is like below
removed all the templates dragged the main window to the top of the page......
when i check the result, there is an empty line as the first line in the table (2nd page)
and also the footer (again a template) on the first page, which is ticked as ( print after end of main window) is NOT displaying.

How to print the internal tables in grid format

i have an internal table with 3 fields
ITAB1
1   a
2   b
3   c
I want to print this in the gird like
1   2   3
a   b   c
Can any one help me how to do it
Thank you

DATA: BEGIN OF S_STRUC,
KEY1,
KEY2,
KEY3,
KEY4,
FIRST TYPE CHAR10 VALUE 'FIRST',
SECOND TYPE CHAR10 VALUE 'SECOND',
THRIRD TYPE CHAR10 VALUE 'THIRD',
END OF S_STRUC.
DATA: ITAB LIKE S_STRUC OCCURS 0 WITH HEADER LINE.
DATA: V_INT TYPE INT4.
FIELD-SYMBOLS: <FS>, <FS1>.
DO 3 TIMES.
V_INT = SY-INDEX + 4.
ITAB-KEY1 = 'A'.
ITAB-KEY2 = 'B'.
ITAB-KEY3 = 'C'.
ITAB-KEY4 = 'D'.
ASSIGN COMPONENT V_INT OF STRUCTURE S_STRUC TO <FS>.
ASSIGN COMPONENT V_INT OF STRUCTURE ITAB TO <FS1>.
<FS1> = <FS>.
APPEND ITAB.
ENDDO.
LOOP AT ITAB.
WRITE: / ITAB.
ENDLOOP.
Regards
vasu

How to print text or field (inside a rep fram)on the last page in report 6i

Hi Everyone,
I want to print the text on the last page.
my text is inside a repetating frame.
as i want to display page no in the filed
and if it is a last page, display page number appended with Last
so it will look like
for 3 pages
on the first page
1
on second page
2
and on last page it should display
3 Last

You cannot know if you are on the last page or not. See this similar thread: Get value of total pages variable
Why not put the page number in the margin like this:
Page 1 of 3
Page 2 of 3
Page 3 of 3
You do that by creating a text field in the margin. Enter this text:
Page &<PhysicalPageNumber> of &<TotalPhysicalPages>

Logical database PSJ: How to access and link tables inside that???

Hi,
I have a requirement like :
I have to write one report which will display project statuses (PSmodule) using the LDB PSJ.. I am using LDB because I neeed dynamic selection screen.
I need to acees the data from table like 1. PROJ, prps_r and JCDS under the LDB PSJ.. but when I found the hirarchy of these table in the LDB , then all 3 tables are at same level.
then How to access and link data from theses 3 tables using GET and LATE command.
I did like below, but wrong number of records are coming
START-OF-SELECTION.
GET proj.
GET prps_r.
GET elm_ps .
GET jcds.
can anyone tell me, what 's wrong here.
points will be rewarded
for proper answer.
Regards,
Mrunal

hi ...get is like a loop in ldb. then if you use the 3 get statements then it will loop with in a loop with different data..

SAP Smartform- how to print character '

Hi Experts,
In my Smart Forms, i have to print word " Customer's " . when Checking in the print preview it is showing good. but after converting the spool to PDF it is showing " Customer#s ". Please suggest how we can fix the same.
Regards,
Priyanka

Hi
As I have checked in my system it is displaying it correctly.
Please check at your end the way I mentioned and if your problem resolved then close the thread. If you still unable to get the solution, write here your further steps performed.
Regards
Imran

How to Print Footer details conditionally in RTF template ( XML Bi report)

Hi,
I have a XML ( BI) report. in which i am printing carry frwd / running total/ sub group total values in the footer section.
I have add one more condition to display the footer values based on the <xdofo:show-carry-forward ...> values.
Please suggest and help me on this, how to handle this case.
Regards,
KAP.

Hi,
Thanks for the reply...
Actually i am looking for the following scenarios :
1. i want to Hide/ Don't show last 3-pages Footer information in the report.
2. While i am displaying the Carry forward information in the report
a. if the page/ running total is 0, i don't want to display the footer information.
b. only case if the page/ running total is > 0, i want enable footer information dynamically for each page.
i have done as follows :
in the Template main body :
*<?template:footer?>*
**1000* *1000**
*<?end template?>*
and for behind 1000 currently :
<xdofo:inline-total display-condition="exceptlast" name="RUNAMT"><xdofo:show-carry-forward name="RUNAMT" format="99G999G999D00"/></xdofo:inline-total>
it was printing the " RUNAMT " calculated page total sucessfully. but here if the Total = 0 then i don't want to show the value in FOOTER...
Thanks in Advance.
Please let me know, if more information required to help..
KAP..

How can I print a html table and preview it?

Hi there!
Please help me.
I spent a lot of time to find how to print a html table and preview it.
I tried use code of the book http://www.manning.com/sbe/ Chapter 22. But this book consists only code for rtf and they change size of JtextPane before printing.
I have found the bellow code;
http://forum.java.sun.com/thread.jsp?thread=120578&forum=57&message=316116 But I problems with printing.
I also found this code; http://forum.java.sun.com/thread.jsp?forum=31&thread=146439
But there is no code,so i don't understand.
Can u help me?
Thanks my friends.

There is the comp.lang.javacript newsgroup for one:
http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&oe=utf-8&group=comp.lang.javascript
Here are a couple of more candidates I found from google in about two minutes:
http://www.jguru.com/forums/home.jsp?topic=JavaScript
http://www.jsworkshop.com/bb/viewforum.php?f=1&sid=524b20160ca47c0ab786214e2003f1d1
http://javascript.internet.com/forum/
I am sure there are many more. :)

SMARTFORMS :How to print an inernal table inside a template cell?

Similar Messages

Maybe you are looking for