Smartforms in Landscape mode not working on page two
Hi Everybody,
I am facing a rather special issue with Smartforms about Landscape printing and I'm out of solution. I've looked at other threads but I cannot find the correct solution to my issue.
I defined only 1 page in my form. It is set with DINA4 and Landscape orientation. The printing works fine for the first page but when my report has a second page it is printed in Portrait mode. The print preview displays all pages in Landscape but when they are physically printed, the second page is Portrait.
I manually calculate the number of lines to print in a loop and change page with a Command Node. Before starting printing each page I execute a Command Node to force the Landscape orientation (SLAND).
I use the LOCL printer to print my report.
Is there any other set up to do? In SPAD, in the ABAP program or physically on the printer or else?
Thank you for your answers.
Best regards,
Sylvain
Hi Aidan,
Thank you for your answer and sorry for the late reply but it took a while to find the exact problem and implement it in productive system.
The problem was related the LOCL printer definition in SPAD but it was linked to "Host Spool Access Method" parameter.
It was set to "Print on Front End Computer (F)" but this value is not supported by SAP anymore. We had to set it to "Front End Printing with Control Tech. (G)".
The reports are now printed in Landscape orientation correctly.
Thank you again for your support.
Best regards,
Sylvain
Similar Messages
-
HT1947 Remote for ipad landscape orientation not working in ios 7
Remote for ipad landscape orientation not working in ios 7
See this thread: remote app rotation locked in portrait orientation after iOS 7 upgrade
It is a discussion only - no helpful hints. Appears to be a bug for sure. -
My "Group" feature is not working in Pages 5.0.1. Any help here?
My "Group" feature is not working in Pages 5.0.1. Any help here?
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us! -
My keyboard is not working in "Pages" but works with all other applications. Please provide resolution advice.
What version of Pages?
There are one or two of us here who are not intimately acquainted with your particular set-up.
Peter -
My curser does not work in Pages. I cannot type.
My curser is not working in Pages. I cannot type.
Open a Word Processing document, sounds like you have opened a blank Layout template which has absolutely nothing to type into, you need to add Textboxes or Shapes.
The Word Processing templates are labelled in the sidebar of the Template Chooser.
Peter -
Widgets on my desktop using dev-mode not working in Lion
I'm trying to get iStat back ontop of my desktop like I had in Snow Leopard. Dev-mode not working to bring widgets forward anymore. Any Ideas how to do this in lion? In Snow Leopard it was defaults write com.apple.sashboard devmode YES now that isn't working.
When I connect my MBP (mid 2010) to iMac 27" (mid 2010), via Mini DisplayPorts, after pressing Command+F2, iMac screen went "blank" while MBP screen stays "blue" for few seconds and went back to normal. How to solve this problem?
-
Why does f12(preview in browser mode) not render the page correctly?
Why does f12(preview in browser mode) not render the page correctly? Instead when i go to the main or original file, it renders properly? It is drriving me nuts! HAHA! Can anyone help? mainly CSS problem, div overlapping but when viewing from original file on browser not through F12, it renders correctly. CS5.5 DW. Thanks!
just that one of it is a f12 (preview in browser) while the other one is going to the directory and clicking the html page by itself.
F12 is simply a hot key that launches your browser.
The only thing I can think of to explain this is that you have a local site folder someplace in addition to a testing server site.
When you hit preview, your testing server on the localhost/ is being called up in the browser.
When you open the HTML page directly, you're seeing the local site file with unparsed data.
Try disabling your Testing Server in Sites > Manage sites > Edit...
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com/ -
Blue screen on start up. Safe mode not working?
Blue screen on start up. Safe mode not working, any suggestions?
Thank you, I had forgotten about target mode. I was able to back up all of my files. I also copied some additional 50 GB of files of the disk as a stress test and the hard drive worked fine and quick (and because it was quicker than retrieving the same files from a network drive to my desktop).
I was hoping to also unpack the Applejack files on my desktop and put them back so I could run them in single user mode without running /etc/rc. However I haven't been able to get my Linux desktop to mount the iBook in Read-Write instead of Read-Only yet (I don't have access to another Mac at the moment). -
my phone was not worked for last two days it happen after the instalation of new os,this is happen one of my friiends also plssssss find some solution
We are all just phone users here, and no-one can hope to provide any advice with so little information to go on as to what exactly has happened. You need to provide some detail.
-
My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
Cheers, Tom -
From FILE -> Page Setup -> I select "Landscape," but the view remains in Portrait mode and I am not able to work in Landscape mode. I found one solution here that says I have to set the width and height for Landscape... any ideas as to WHY landscape isn't working?
Hi Yvan - I am using the latest Appleworks for OS X, 6.2.9. Also, the post you referenced is the one I had already read telling the reader to manually set the width and height for landscape mode. I'm wondering why I can't simply choose "Landscape" and have the view in Appleworks change to Landscape? Landscpe is a standard feature in all page setups for all applications! Seems to me it should work without having to manually set it to a pre-determined width and height. Any suggestions?
-
Printing in TUMBLE mode not working
hello,
I have the problem that the TUMBLE mode does not work in my program.
I have tested the printer with MS Word to be sure it works with my hardware and
it succeeded.
I use a DocPrint Object and specified the PrintRequestAttributeSet attributes OrientationRequested.LANDSCAPE and Sides.TUMBLE (=Sides.TWO_SIDED_SHORT_EDGE).
If I change this to Sides.ONE_SIDED, the printer correctly prints each pair of sides on 2 papers (one-sided).
If I change this to Sides.DUPLEX, the printer prints in DUPLEX mode correctly (TWO_SIDED_LONG_EDGE)
If I change this to Sides.TUMBLE, it still prints in DUPLEX !
If I use OrientationRequested.PORTRAIT, the printer prints always binding to the short side , like I need it (no matter if I switch to DUPLEX or TUMBLE).
What could be the reason that the program ignores the TUMBLE attribute ?
Here is my code:
public static void doPrint(Print printData) throws Exception {
PrintService printer = null;
printer = printerLookup(printerName);
DocPrintJob job = printer.createPrintJob();
DocFlavor flavor = DocFlavor.SERVICE_FORMATTED.PRINTABLE;
Doc doc = new SimpleDoc(printData, flavor, null);
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
aset.add(OrientationRequested.LANDSCAPE);
aset.add(Sides.TWO_SIDED_SHORT_EDGE);
job.print(doc, aset); //print
}Yes, it's not a permission issue. And it only happens on this one machine too. No error messages in any of the log files. This is a real tough one. I'm tempted to think that it might be a graphics driver issue. The machine with the problem is a 2008 Mac Pro with a GeForce 8800 GT. So if anyone with a similar configuration could test it I'd at least have another hint for what's going on.
As an interesting sidenote, other capture applications like Voila work fine, which makes the graphics driver theory unlikely, but well, I'm running out of possible causes.
Thanks,
Jazz -
Folks,
I am trying to configure ACE in transparent mode and it is not working, i can browse to the servers directly,but when i try to hit the vip , I do not get any webpages, all keepalives are up and everything is in inservice.
hostname abc
boot system image:c6ace-t1k9-mz.3.0.0_A1_6_1.bin
access-list ANY line 8 extended permit ip any any
rserver host rs1
ip address 1.1.1.1
inservice
rserver host rs2
ip address 1.1.1.2
inservice
serverfarm host SF1
rserver rs1
inservice
rserver rs2
inservice
class-map type management match-any REMOTE_ACCESS
10 match protocol telnet any
20 match protocol ssh any
30 match protocol icmp any
class-map match-all VIP
2 match virtual-address 1.1.1.3 any
class-map type http loadbalance match-any src1
2 match source-address 0.0.0.0 0.0.0.0
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
policy-map type loadbalance first-match R-Policy
class class-defaut
serverfarm SF1
policy-map multi-match R-LB
class VIP
loadbalance vip inservice
loadbalance policy R-Policy
loadbalance vip icmp-reply active
loadbalance vip advertise
interface vlan 3
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface vlan 4
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input R-LB
no shutdown
interface bvi 1
ip address 1.1.1.4 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 1.1.1.5I made some progress, but still it is not working.
When the server behind the ACE module default gateway is set to the firewall, i can telnet to the vip at port 80,but i still do not see the page when i open the browser and point to the vip. here are the outputs.
hostname RBharti
boot system image:c6ace-t1k9-mz.3.0.0_A1_6_1.bin
access-list ANY line 8 extended permit ip any any
rserver host rs1
ip address 1.1.1.1
inservice
rserver host rs2
ip address 1.1.1.3
inservice
serverfarm host SF1
rserver rs1
inservice
rserver rs2
inservice
class-map type management match-any REMOTE_ACCESS
10 match protocol telnet any
20 match protocol ssh any
30 match protocol icmp any
class-map match-all VIP
2 match virtual-address 1.1.1.5 any
policy-map type management first-match REMOTE_MGMT_ALLOW_POLICY
class REMOTE_ACCESS
permit
policy-map type loadbalance first-match R-Policy
class class-default
serverfarm SF1
policy-map multi-match R-LB
class VIP
loadbalance vip inservice
loadbalance policy R-Policy
loadbalance vip icmp-reply active
loadbalance vip advertise
interface vlan 3
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
service-policy input R-LB
no shutdown
interface vlan 4
bridge-group 1
access-group input ANY
access-group output ANY
service-policy input REMOTE_MGMT_ALLOW_POLICY
no shutdown
interface bvi 1
ip address 1.1.1.4 255.255.255.0
no shutdown
ip route 0.0.0.0 0.0.0.0 202.137.232.193
Ri/Admin# sh service-policy
Policy-map : R-LB
Status : ACTIVE
Interface: vlan 3
service-policy: R-LB
class: VIP
loadbalance:
L7 loadbalance policy: Rediff-Policy
VIP Route Metric : 77
VIP Route Advertise : DISABLED
VIP ICMP Reply : ENABLED-WHEN-ACTIVE
VIP State: INSERVICE
curr conns : 0 , hit count : 54
dropped conns : 54
client pkt count : 81 , client byte count: 3888
server pkt count : 0 , server byte count: 0 -
MicroC-OS-II running on Microblaze with UARTLITE in interrupt mode not working
Hello,
I am trying to write and application that uses the MicroBlaze which runs the MicroC-OS-II. I am also trying to use the UARTLITE in interrupt mode.
Currently I can use the UARTLITE in interrrupt mode if I run a standalone package that is without MicroC-OS-II.m
I read the documentation attached see page 22 (Handling Interrupts). On how the OS handles interrupts but I am little confused on how to setup the UARTLITE in interrrupt mode to work with the OS.
I know that OS_CPU_ISR() handles the interrupt but how do I make it so that it handles the uartlite interrupt.
I am really confused how I should modify the UARTLITE interrupt code below to work with MICROC/OS. As really confused I MEAN I JUST DON"T understand.
* (c) Copyright 2002-2013 Xilinx, Inc. All rights reserved.
* This file contains confidential and proprietary information of Xilinx, Inc.
* and is protected under U.S. and international copyright and other
* intellectual property laws.
* DISCLAIMER
* This disclaimer is not a license and does not grant any rights to the
* materials distributed herewith. Except as otherwise provided in a valid
* license issued to you by Xilinx, and to the maximum extent permitted by
* applicable law: (1) THESE MATERIALS ARE MADE AVAILABLE "AS IS" AND WITH ALL
* FAULTS, AND XILINX HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS, EXPRESS,
* IMPLIED, OR STATUTORY, INCLUDING BUT NOT LIMITED TO WARRANTIES OF
* MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE;
* and (2) Xilinx shall not be liable (whether in contract or tort, including
* negligence, or under any other theory of liability) for any loss or damage
* of any kind or nature related to, arising under or in connection with these
* materials, including for any direct, or any indirect, special, incidental,
* or consequential loss or damage (including loss of data, profits, goodwill,
* or any type of loss or damage suffered as a result of any action brought by
* a third party) even if such damage or loss was reasonably foreseeable or
* Xilinx had been advised of the possibility of the same.
* CRITICAL APPLICATIONS
* Xilinx products are not designed or intended to be fail-safe, or for use in
* any application requiring fail-safe performance, such as life-support or
* safety devices or systems, Class III medical devices, nuclear facilities,
* applications related to the deployment of airbags, or any other applications
* that could lead to death, personal injury, or severe property or
* environmental damage (individually and collectively, "Critical
* Applications"). Customer assumes the sole risk and liability of any use of
* Xilinx products in Critical Applications, subject only to applicable laws
* and regulations governing limitations on product liability.
* THIS COPYRIGHT NOTICE AND DISCLAIMER MUST BE RETAINED AS PART OF THIS FILE
* AT ALL TIMES.
* @file xuartlite_intr_example.c
* This file contains a design example using the UartLite driver (XUartLite) and
* hardware device using the interrupt mode.
* @note
* The user must provide a physical loopback such that data which is
* transmitted will be received.
* MODIFICATION HISTORY:
* <pre>
* Ver Who Date Changes
* 1.00a jhl 02/13/02 First release
* 1.00b rpm 10/01/03 Made XIntc declaration global
* 1.00b sv 06/09/05 Minor changes to comply to Doxygen and coding guidelines
* 2.00a ktn 10/20/09 Updated to use HAL Processor APIs and minor changes
* for coding guidelnes.
* </pre>
/***************************** Include Files *********************************/
#include "xparameters.h"
#include "xuartlite.h"
#include "xintc.h"
#include "xil_exception.h"
/************************** Constant Definitions *****************************/
* The following constants map to the XPAR parameters created in the
* xparameters.h file. They are defined here such that a user can easily
* change all the needed parameters in one place.
#define UARTLITE_DEVICE_ID XPAR_UARTLITE_2_DEVICE_ID
#define INTC_DEVICE_ID XPAR_INTC_0_DEVICE_ID
#define UARTLITE_INT_IRQ_ID XPAR_INTC_0_UARTLITE_2_VEC_ID
* The following constant controls the length of the buffers to be sent
* and received with the UartLite device.
#define TEST_BUFFER_SIZE 100
/**************************** Type Definitions *******************************/
/***************** Macros (Inline Functions) Definitions *********************/
/************************** Function Prototypes ******************************/
int UartLiteIntrExample(u16 DeviceId);
int SetupInterruptSystem(XUartLite *UartLitePtr);
void SendHandler(void *CallBackRef, unsigned int EventData);
void RecvHandler(void *CallBackRef, unsigned int EventData);
/************************** Variable Definitions *****************************/
XUartLite UartLite; /* The instance of the UartLite Device */
XIntc InterruptController; /* The instance of the Interrupt Controller */
* The following variables are shared between non-interrupt processing and
* interrupt processing such that they must be global.
* The following buffers are used in this example to send and receive data
* with the UartLite.
u8 SendBuffer[TEST_BUFFER_SIZE];
u8 ReceiveBuffer[TEST_BUFFER_SIZE];
* The following counters are used to determine when the entire buffer has
* been sent and received.
static volatile int TotalReceivedCount;
static volatile int TotalSentCount;
* Main function to call the UartLite interrupt example.
* @param None
* @return XST_SUCCESS if successful, XST_FAILURE if unsuccessful
* @note None
int main(void)
int Status;
xil_printf("Started\n");
* Run the UartLite Interrupt example, specify the Device ID that is
* generated in xparameters.h.
Status = UartLiteIntrExample(UARTLITE_DEVICE_ID);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
return XST_SUCCESS;
* This function does a minimal test on the UartLite device and driver as a
* design example. The purpose of this function is to illustrate
* how to use the XUartLite component.
* This function sends data and expects to receive the same data through the
* UartLite. The user must provide a physical loopback such that data which is
* transmitted will be received.
* This function uses interrupt driver mode of the UartLite device. The calls
* to the UartLite driver in the handlers should only use the non-blocking
* calls.
* @param DeviceId is the Device ID of the UartLite Device and is the
* XPAR_<uartlite_instance>_DEVICE_ID value from xparameters.h.
* @return XST_SUCCESS if successful, otherwise XST_FAILURE.
* @note
* This function contains an infinite loop such that if interrupts are not
* working it may never return.
int UartLiteIntrExample(u16 DeviceId)
int Status;
int Index;
* Initialize the UartLite driver so that it's ready to use.
Status = XUartLite_Initialize(&UartLite, DeviceId);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
* Perform a self-test to ensure that the hardware was built correctly.
Status = XUartLite_SelfTest(&UartLite);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
* Connect the UartLite to the interrupt subsystem such that interrupts can
* occur. This function is application specific.
Status = SetupInterruptSystem(&UartLite);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
* Setup the handlers for the UartLite that will be called from the
* interrupt context when data has been sent and received, specify a
* pointer to the UartLite driver instance as the callback reference so
* that the handlers are able to access the instance data.
XUartLite_SetSendHandler(&UartLite, SendHandler, &UartLite);
XUartLite_SetRecvHandler(&UartLite, RecvHandler, &UartLite);
* Enable the interrupt of the UartLite so that interrupts will occur.
XUartLite_EnableInterrupt(&UartLite);
* Initialize the send buffer bytes with a pattern to send and the
* the receive buffer bytes to zero to allow the receive data to be
* verified.
for (Index = 0; Index < TEST_BUFFER_SIZE; Index++) {
SendBuffer[Index] = Index;
ReceiveBuffer[Index] = 0;
* Start receiving data before sending it since there is a loopback.
XUartLite_Recv(&UartLite, ReceiveBuffer, TEST_BUFFER_SIZE);
* Send the buffer using the UartLite.
XUartLite_Send(&UartLite, SendBuffer, TEST_BUFFER_SIZE);
* Wait for the entire buffer to be received, letting the interrupt
* processing work in the background, this function may get locked
* up in this loop if the interrupts are not working correctly.
while ((TotalReceivedCount != TEST_BUFFER_SIZE) ||
(TotalSentCount != TEST_BUFFER_SIZE)) {
for (Index = 0; Index < TEST_BUFFER_SIZE; Index++)
xil_printf("%d",ReceiveBuffer[Index]);
* Verify the entire receive buffer was successfully received.
for (Index = 0; Index < TEST_BUFFER_SIZE; Index++) {
if (ReceiveBuffer[Index] != SendBuffer[Index]) {
return XST_FAILURE;
return XST_SUCCESS;
* This function is the handler which performs processing to send data to the
* UartLite. It is called from an interrupt context such that the amount of
* processing performed should be minimized. It is called when the transmit
* FIFO of the UartLite is empty and more data can be sent through the UartLite.
* This handler provides an example of how to handle data for the UartLite,
* but is application specific.
* @param CallBackRef contains a callback reference from the driver.
* In this case it is the instance pointer for the UartLite driver.
* @param EventData contains the number of bytes sent or received for sent
* and receive events.
* @return None.
* @note None.
void SendHandler(void *CallBackRef, unsigned int EventData)
TotalSentCount = EventData;
* This function is the handler which performs processing to receive data from
* the UartLite. It is called from an interrupt context such that the amount of
* processing performed should be minimized. It is called data is present in
* the receive FIFO of the UartLite such that the data can be retrieved from
* the UartLite. The size of the data present in the FIFO is not known when
* this function is called.
* This handler provides an example of how to handle data for the UartLite,
* but is application specific.
* @param CallBackRef contains a callback reference from the driver, in
* this case it is the instance pointer for the UartLite driver.
* @param EventData contains the number of bytes sent or received for sent
* and receive events.
* @return None.
* @note None.
void RecvHandler(void *CallBackRef, unsigned int EventData)
TotalReceivedCount = EventData;
* This function setups the interrupt system such that interrupts can occur
* for the UartLite device. This function is application specific since the
* actual system may or may not have an interrupt controller. The UartLite
* could be directly connected to a processor without an interrupt controller.
* The user should modify this function to fit the application.
* @param UartLitePtr contains a pointer to the instance of the UartLite
* component which is going to be connected to the interrupt
* controller.
* @return XST_SUCCESS if successful, otherwise XST_FAILURE.
* @note None.
int SetupInterruptSystem(XUartLite *UartLitePtr)
int Status;
* Initialize the interrupt controller driver so that it is ready to
* use.
Status = XIntc_Initialize(&InterruptController, INTC_DEVICE_ID);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
* Connect a device driver handler that will be called when an interrupt
* for the device occurs, the device driver handler performs the
* specific interrupt processing for the device.
Status = XIntc_Connect(&InterruptController, UARTLITE_INT_IRQ_ID,
(XInterruptHandler)XUartLite_InterruptHandler,
(void *)UartLitePtr);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
* Start the interrupt controller such that interrupts are enabled for
* all devices that cause interrupts, specific real mode so that
* the UartLite can cause interrupts through the interrupt controller.
Status = XIntc_Start(&InterruptController, XIN_REAL_MODE);
if (Status != XST_SUCCESS) {
return XST_FAILURE;
* Enable the interrupt for the UartLite device.
XIntc_Enable(&InterruptController, UARTLITE_INT_IRQ_ID);
* Initialize the exception table.
Xil_ExceptionInit();
* Register the interrupt controller handler with the exception table.
Xil_ExceptionRegisterHandler(XIL_EXCEPTION_ID_INT,
(Xil_ExceptionHandler)XIntc_InterruptHandler,
&InterruptController);
* Enable exceptions.
Xil_ExceptionEnable();
return XST_SUCCESS;
Hello,
I have a KC705 board, with Microblaze on it. My software is Witten above the operating system of µC/OS-II.I am trying to write multi task ie. task1 and task2. Application that uses the MicroBlaze which runs the MicroC-OS-II.
I am using the UARTLITE able to run hello world program successfully is with MicroC-OS-II.I read the documentations, On how the OS handles multi task, but I am little confused on how to implement..(i am new to RTOS). Please suggest me or share the any documents, any example codes.
~thanks
ASHIOK H -
Q5 Reader Mode not working as hoped
Hello.
I got my spankin' new Q5 yesterday, and whilst I'm still figuring a lot of it out, I have to say that the reader mode in some web pages is not working as I would have hoped.
It is enlarging the text well, and it looks great, but it is not showing me all of the page. I realize that some webpages are made up of frames and various parts, but I would have expected it to show me the main text.
I read the wetcanvas forum a lot, and it is only showing me the first post of a thread, it isn't showing me other peoples' replies.
Also, whilst learning the Q5, I visited docs.blackberry.com and, again, it is only showing me a couple of paragraphs.
Is there anything I can do?
Thanks.EUREKA!!!
Thanks for sticking it out till the bitter end.
Not only does it now work but after all that practise I don't think I'll ever forget how to deploy a farm solution, set the scope, retract, pull hair out, create features etc!
For anyone arriving at this thread.. the code below will check to see if the current user is a site admin and cancel the delete event if they are not, otherwise it will allow the delete event to happen
public override void ItemDeleting(SPItemEventProperties properties)
base.ItemDeleting(properties);
using (SPSite site = new SPSite(properties.WebUrl))
using (SPWeb web = site.OpenWeb())
int _currentUser = properties.CurrentUserId;
SPUser spCurrentUser = web.SiteUsers.GetByID(_currentUser);
if(spCurrentUser.IsSiteAdmin == true)
properties.Cancel = false;
properties.Status = SPEventReceiverStatus.Continue;
else
properties.Cancel = true;
properties.ErrorMessage = "Announcements cannot be deleted";
Maybe you are looking for
-
Hi, I just updated my mac from version10.6 to 10.9.3 os mavericks. i went to open iPhoto and it says "Your photo library will not be readable by previous versions of iPhoto after the upgrade." does this mean I have lost all photos i had in there? It
-
LG Cosmos Touchscreen issue(s)
Recently the calibration on my touch screen got thrown off somehow. I tried removing my battery to no avail. I cannot find a good documentation on how to reset the phone to factory defaults, or even reset the touch screen without having to use the to
-
Preinstalled filters from CS5 not showing up in CS6 upgrade
I just installed CS6 upgrade from CS5 but the Nik and Topaz software filters are not showing up. How do I get CS6 to recognize them without having to reinstall all of them again.
-
Chinese character displaying as ???? in excel while importing data from sql-server 2000
Hi everyone, I am facing a problem while importing sql-server 2000 data in excelshhet .There is some chinese character in database table. After importing data in excel chinese character looks like ????????.In sql-server this chinese character looks l
-
My iPod nano WONT turn ON!! Help!!
-I tried charging it -I tried toggeling the hold button -and I also pushed every button down for like 6 seconds PLEASE HELP what do I do??