My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
 Cheers, Tom

Similar Messages

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using. Now, no reactions. What should I do?

The button on my Ipod Touch (the big one just below the screen) will not work when I press it. Nothing happens, when before it would wake my IPod out of sleep mode, and exit out of programs I was using (ex. ITunes or Safari to main screen) . Now, no reactions. When I press the button, it appears to be more indented then it was before. What should I do? Do I need to get it fixed or replaced, or is this a problem I can fix on my own? Whatever it is, I really need some advice. Thanks in advance.

Try:
fix for Home button
iPhone Home Button Not Working or Unresponsive? Try This Fix
- If you have iOS 5 and later you can turn on Assistive Touch it add the Home and other buttons to the iPods screen. Settings>General>Accessibility>Assistive Touch
- If not under warranty Apple will exchange your iPod for a refurbished one for:
Apple - Support - iPod - Repair pricing
You can do it an an Apple store by:
Apple Retail Store - Genius Bar
or sent it in to Apple. See:
Apple - Support - iPod - Service FAQ
- There are third-party places like the following that will repair the Home button. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens

I bought an IPAD air from state and the screen is not working correctly and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

i bought an IPAD air (32 gb wifi only) from USA just one month ago and the screen is not working correctly(picture attached) and right now i'm in Egypt ,can i send my ipad to service in Egypt and the warranty will work in Egypt or what?

Have you tried a soft-reset to see if that fixes it ? You might be able to get warranty service in Egypt for your iPad, but the warranty includes :
IMPORTANT RESTRICTION FOR iPHONE AND iPAD SERVICE.
Apple may restrict warranty service for iPhone and iPad to the country where Apple or its Authorized Distributors originally sold the device.
As it's wifi-only you should have a better chance of it being serviced under warranty, but there are no guarantees, it might depend upon the repairer.
Egypt authorised service providers : https://locate.apple.com/eg/en/

Hi I live in Iran and I forgot the answer to the security question please help me thanks

Hi I live in Iran and I forgot the answer to the security question please help me thanks

How to reset your Apple ID security questions.
Go to appleid.apple.com, click on the blue button that says 'Manage Your Apple ID'.
Log in with your Apple ID and password. (If you have forgotten your Apple ID password, go to iforgot.apple.com first to reset your password with a password recovery email)
Go to the Password & Security section on the left side, and click on the link underneath the security questions that says 'Forgot your answers? Send reset security info email to [email]'.
This will generate an automated e-mail that will allow you to reset your security questions.
If that doesn't work, or there is no rescue email link available, then click on 'Temporary Support PIN' that is in the bottom left side, and generate a 4-digit PIN for the Apple Account Security Advisor you will be contacting later.
Next, go to https://getsupport.apple.com
(If you see a message that says 'There are no products registered to this Apple ID, simply click on 'See all products and services')
Choose 'More Products & Services', then 'Apple ID'.
A new page will open.
Choose 'Other Apple ID Topics', then 'Forgotten Apple ID Security Questions'.
Click the blue 'Continue' button.
Select the contact option that suits your needs best.

HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. Any clues?

I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. I only have a previous version re-install disc as I bought the latest OSX off the app store. Any help gratefully received?

Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Login Window: Screen does not refresh correctly after waking 10.7.2 iMac and MacBook.

I have a client who brought to my attention that when we wakes his iMac and MacBook after the screen dims or sleeps at login screen, that sometimes the screen does not refresh correctly and you must use the cursor to basically "clear the screen." I have witnessed this myself and elimiated all third party products and this still happens. I am starting to believe that is is a bug in 10.7.2. Has anyone witnessed this or have any suggestions on how to remedy? Thank you.

Thanks lynque. It turns out I did need a keychain repair, but that didn't fix the problem. I probably should have done this earlier, but I ended up unplugging all peripherals (2 firewire + 3 USB) then powered up without issue.
So I shut down, plugged in one at a time, and ran into the problem again after plugging in an external hard drive (WD My Book Essential). I repaired with disk utility, but the problem remained.
I then rebuilt the partitions with Disk Warrior, and now everything seems to work....

Macbook Retina Display isight camera not working - graphics freeze

I recently bought a base MBP-RD and can say that I am overall impressed with it, though I have found a couple issues already. One of them is related to the iSight camera which for some reason doesn't work. The camera appears in system profiler, but it shows as "camera not detected" when trying to launch application like iChat, Skype, FaceTime, etc. I already tried re-installing OSX Lion, and still not working.
I have also found some weird issue with graphics where it freezes a series of frames when going to Mission Control or App Expose.
I am returning this computer as there are other things I didn't like, but overall pretty impressive (no LED battery indicator, no Lock slot, no sleep light indicator...)
Please reply if you have same issue.

i think Macbook Pro is a good computer but plenty of issues, since day one.
i received my computer with space bar cracked. i figured this out @ night when the keyboard backlight was.
then my USB port ***** on it, it does not read all.
even after the update no go the USB port does not work all the time with the apple usb to ethernet adapter.
while if i install vmware it does work on the windows in VMware environement.
my Camera also is not being detected how can i fix the camera.
please do not tell me go to genius bar, they are all but not genius, if you have issue they ask you to format they do not know how to troubleshoot.
Conclusion problem with macbok retina version:
isight Camera wont detect
USB port Does not work with all devices.
Space Bar key broken from manufacture.

Macbook Pro Retina - nVidia card does not work correctly

Hi,
having a MacBook Pro Retina. It ran fine till yeasterday when I fired up a game which was laggy and it was running fine before. It took me several hours to find where the problem is and it seems to me that the nVidia dicrete card is not working. But strangely not working. I installed gfxCardStatus to see whether the card is being switched to run the game and it actually is. But the performance is the same as running it on an internal Intel. I took another test and downloaded CINEBENCH to see the differences and sadly the results are the same if I switch to nVidia or to Intel and run the benchmark.
Obviously something is not right here. It happened over night. Before it worked corectly. I do not remember installing something that day/night that could have broken it (in case it is a SW problem). Only one thing comes to my mind - Apple Java update. But I tried to uninstall it and got the same result. I did try to restart several times. But otherwise there is no visible flaw, e.g. flickering or black screen when swithech do nVidia - nothing. gfxCardStatus shows that the system switches the card and I notice no change. Only in heavy load it is obvious that it is slow (slower than it was).
Is there a way to see if the nVidia card is working? I suspect that even if the system is trying to switch to a discreet card it still runs on the Intel in reality. Any way how to distinguish this rather than to rely on gfxCardStatus? Any log that would make this clear? Any test I can run (Apple HW test shows "no problem detected")?
Many thanks for hints.

To show what I am talkin about I did another test. I downloaded and ran LuxMark. There it is possible to test CPU and GPU separately on a same benchmark scene. FIrst I let the system switch to nvidia and did the test:
Then I manually switched to Intel/CPU in gfxCardStatus and also selected CPU in the LuxMark and did the same test. The result is:
You see? How it is possible that in OpenCL computation CPU with internal graphic card is even faster then the descreet one? This is what I am experiencing now and cannot figure out where the problem lies.
Would the Apple HW test discover a dead nvidia card? Because nothing shows that the card is dead but as you can see it is not performing as it should.

TS1248 Track Pad not working correctly after upgrading to OSX10.8

I've the same issue since yeterday night after upgrading to OSX10.8 from OSX10.6. The problem I am having is only right side of the track pad is not working.. Did some one already experience this issue ?
See screen shot
Cheers,
Vivek

In addtion to Altenbach's comments -
I'd recommend trying another VI function to get the power spectrum for
your signal to see if the behavior is the same. You can find some
examples of VIs using the power spectrum functions using the NI Example
Finder.
You can go to LabVIEW's Example Finder by going to Help >> Find Examples.
Then search for FFT. There should be some results that include FFT and
Power Spectrum Units.vi, Power Spectrum Measurement.vi, Basic Spectral Measurements.vi, and Spectrum Measurements.vi. Try opening and
running these examples to see if the VIs are returning the proper
results.
Mark Walters
Application Engineer
National Instruments

Screen Shots not working correctly

When I click Shift + CMD + 4 and then Space, you can take screenshots of a window rather then the whole screen
The problem is that the screen shots are cut off when the window is taking up the whole screen
A picture of what I mean: http://grab.by/4Lq5
You can see that the right side is chopped off! Why? How can I fix this?

hmm, that's odd - if you do it manually selecting the whole screen, does that work?
I imagine that this terminal command will give the same undesirable result - but since it bypasses just a little of the GUI.... you might try it.
screencapture -iw ~/Desktop/screenshottest.png

New retina display hdmi out not working

I have been connecting my new mbp to my tv for weeks and have not had any problems. Yesterday, I went to connect it through my hdmi and my computer is no longer recognizing that my tv is connected. It switches modes and configures my desktop like I have the external hooked up (I can drag things off my laptop display) but it is not sending a signal to the tv. I have switched out cables, tried a different TV and searched online. Why is this all of a sudden happening after weeks of normal function? Is it related to a software update?? very frustrated...

Some users have reported (in these forums and elsewhere) that they had a problem after installing 10.8.2, but that problem caused both the internal and external screens to go black.
I regret to say I do not recall reading about anybody else with quite your problem.

Screen Flows Not Working Correctly

We are using OPM 10.2.
We decided to extensively use screen flows because we had a requirement wherein the user should be allowed to navigate back and forth on the OPA screens.
If we do not use screen flows the following screnario occurs..
We've a rule which is satisfied if all attributes on Screen1 Screen2 and Screen3 are known.
User enters details on Screen1 and Screen2, but he wants to navigate back from Screen3 to Screen1, he reaches Screen1 by hitting browser Back twice, but when he again hits
Submit on Screen1 he's directly navigated to Screen3 skipping Screen2. This is because all attributes on Screen2 had been collected in first iteration.
We used screen flows expecting that this would force the required screen order, but it is also behaving in similar way.
Does it have any thing to do with the way the rules are written.
Thanks In Advance.

Hi user1002818,
The reason that the screens aren't being displayed again is because then engine has the data which was collected on those screens - from a rules point of view there is no need to display them again. To enforce a particular forward/backwards flow we have Interview Flows, which it sounds like you've already started to use.
One of the reasons that OWD doesn't support an OOTB 'back' button is because navigating backwards in a session has the possibility of invalidating data 'upstream' in the interview. e.g. I fill in some personal details on one screen, on screen 2 I say that I have children, and on screen 3 I create children instances. When I navigate back and change my previous answer to 'I do not have children' what happens to the children instances which I've created? Semantically my session is now invalid. It's a choice left up to the customer/project as to how they want to manage their session validity (delete the data, show the data and ask the customer if it's valid or just do nothing).
One way to achieve what you want to do would be to author rules as normal and manage the screen flows via a simple push/pop stack implementation which keeps track of screen submissions and data entered on those screens. This will give you the flexibility to both delete invalid data or display it to the user again as you wish
Could you tell me which project it is that you're working on at the moment please? I'm working on large UK project at the moment and the OPA team is providing support to achieve something very similar.

Numbers on new retina macbook pro does not work correctly??

Hi. When I run Numbers on my new Macbook Pro Retina, the interface and all the text looked really blocky and low resolution. I read that there was an easy fix to this by un-ticked the box that says "open in low resolution" in get info. I did this and it looks much much better the only problem is the cell selector square (cursor) is not lined up with the cells on the screen. My guess is that it is because the cursor or cell selector is at a different resolution to the screen. Can anyone please help with this issue or know if there is an update for this coming soon?
Thanks!

No, your right, it doesnt exactly fill you with confidence having parted with the large sum of cash for this machine. Having done a bit of sniffing around about this issue, I have discovered that apparently apple are launching iworks x at the end of July. Hopefully the new version will fix it. Another annoying thing is that office for mac is really bad visually aswell and you cant stop it from running in low resolution mode! Needs sorting as I use spreadsheets alot.

Touch screen in not working even after Hard Reset

My Palm Treo 750 stopped working and responding suddenly........i tried a soft rest which didn't worked i then tried hard reset but in both cases the device boots and screen pops up "Tap the Screen to Start The Device". However this is the point where my device hangs up even after resetting it several times. I have also downloaded reset software from the palm website but unfortunately it only runs/works from palm device. i have installed microsoft active sync from the palm CD and my device is detected and syncronized using USB cable which prbably shows it doesnot have a hardware issue.
Post relates to: Treo 750 (AT&T)

Remove any screen protecters or cases, then hard reset again. If the problem continues then it will need to be repaired or replaced.
Post relates to: None

How can I remove fine scratches off the I Pad Retina Display ?

Dear Community,
I would appreciate to receive your experiences and tipps how to remove fine scratches off the I pad retina display without harming its surface ! Thx

Apple Stores sell a good screen cleaner which I would recommend for cleaning screens - it works well and doesn't do any damage. This might clean away a lot of what you see as fine scratches.
Other than this, I would stay away from anything else as you may well do a lot more harm than good.

My mini i pad 2 retina display screen is not work correctly after two days of buying appear some gray line on screen un furtunately i live in iran and i havnot access to any i pad store please guide me

Similar Messages

Maybe you are looking for