Smartforms - Text in a cell

Hi friends! I need some help!
I have an LOOP and inside this a Program Lines. After I have a TEXT. All this things is in a table.
HEADER_TEXT TYPE STRING.
LOOP AT T_LINES INTO W_LINES.
CONCATENATE W_LINES INTO HEADER_TEXT.
After Loop.
TEXT_ELEMENT with &header_text&.
The problem is when I print the form, TEXT_ELEMENT prints only part of HEADER_TEXT, some like this:
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXXXXXXXXX -> rest of text is missing...
Anyone can help me?
Thanks a lot!!

Looks like you concatenate has an issue :
CONCATENATE W_LINES INTO HEADER_TEXT.
CONCATENATE field1 field2 INTO HEADER_TEXT. "<<syntax...

Similar Messages

Export to excel with formatting was autowrapping text in a cell

Export to excel with formatting was autowrapping text in a cell without having to check the can grow option. When the can grow option is checked it does wrap the text however it spans multiple rows, which causes complications when trying to sort.
It worked in:
ProductVersion=10.0.0.533
ProductName=Crystal Enterprise 10 Embedded
Doesnt work in:
Crystal Reports 10.0 Service Pack 6
After the upgrade the reports did not autowrap, b/c the "can grow" option was not checked. I believe this was fixed by "ADAPT00305137 Patch ID: 36479914
Description:
When users export to Excel 97-2000 with the page-based format, text fields are wrapped, even when the "can grow" feature in the
Designer is turned off." . After we turn the option to grow on it does wrap however it spans across multiple rows. So I guess my question is there a way for it not to span multiple rows when wrapping text?
Edited by: dforde on Jan 27, 2010 11:12 PM

I could be wrong, but I believe the export to excel option exports the database values, and the export to HTML exports the values seen in the sheets. If the database values are stored as seconds, the Excel will see them as seconds, and the data will have to be formatted properly in Excel.
I haven't toyed around with Excel exports that much, but it might be possible to set up a template or macro in excel that would have the proper formatting, and use it when opening the Disco export.

Multi-coloured text in table cell

I have a table where individual cells can have multi-coloured text. To do this I use html when I set the text in a cell renderer. It works fine. However, when the column width is too narrow for the text then the text is wrapped. If the text is not html then the text is not wrapped.
How can I keep the different colours but make sure the text is not wrapped?
Thanks

I never want the text to wrap even if the column width is too small for the text.
If the text of the renderer was set to abcdefghijklmnand the column is only large enough to show the first 10 chars then the user (obviously) would only see the first 10 chars.
If I now set the text to <html>ab<font color="#ff0000">cde</font>fghijklmn</html> then, assuming the column is wide enough, the user will see all the text but cde is shown in red.
However, if the column width is now changed so there is only room to show the first 10 chars then the user will only see abcde not as I would hope abcdefghij

Different color text in one cell

How do I set a color for a group of words within a cell leaving the rest of the words black?
I can make all the text within a cell the same color but when I select the words I want to be a different color the color selector in the toolbar goes away and only fx, Cancel and Accept buttons are available.

If it is simple text, not the result of a formula, select the words you want to change and select another color from the toolbar or the color panel. That is, unless I didn't understand your request. I don't know where you are seeing Accept, Cancel and Fx.

How do I change the colour of text in a cell in a JTable?

I am trying to change the color of the text in a single cell in a JTable. I have tried not adding a cell renderer and it changes the colour of text in all cells.
I have tried adding a cell renderer to the table and it does the same ie all cells text colour changes.
I am able to add a cell renderer to a column and it changes all the cells in the column.
I cannot figure out how to change just one single cell's text colour without effecting the other cells.

Ok, so if i create my own cell renderer do I set it as the default renderer for the whole table i.e.
table.setDefaultRenderer(MyCellRenderer, renderer);
Does this set one cell renderer for the whole table or is there an individual one for each cell?

How to dynamically replace variables in SMARTFORM texts based on item data?

Hi experts,
I'm currently designing a confirmation of order using Adobe PDF forms. The general layout with tables, pictures and texts was not big deal.
But one tiny bit doesn't work and I'm becoming more and more desperate about it.
We need various free texts for our pdf form. I created the texts using smartform texts. Some of these texts need to be slightly dynamic, so I added some dynamic fields in it.
For example:
"The material is currently out of stock.You can expect shipping around week &num_week&."
To replace the dynamic field &num_week& in my interface, I read that I have to name the dynamic field exactly like the corresponding field in my interface. In my case this would be now:
"The material is currently out of stock.You can expect shipping around week &SLS_PRT_COM-ITEM_DETAIL-ZZ_EXTRAFIELDS-ZZWEEKNUM&."
To see the text on my form, I added a text object with type 'text module' and the proper textname. Of course I'm able to insert text on my form, save and activate it without problems. But if I want to print the form, nothing happens as the print program exits with an error code.
After some hours I found out that this problem only occurs if I'm trying to replace the dynamic field with a field from the item table. Using a field from head details or globals like sy-mandt works like a charm.
So my question is: Is it possible to use item data to replace dynamic fields of a smartform text?
Greetings and thanks in advance!
André

Hi
Have a look at the links below:
LiveCycle ES2 * Adobe LiveCycle Designer ES2
Using floating field in Adobe Forms to display text paragraph with dynamic variables in between
After adding the floating field it will apeare in the hierarchy pallet above or bellow the text field.
Good luck
Shai.

If Number = than then display text from another cell

Hi
I'd appreciate it if anyone can help me with this please.
I am putting together a gradebook type spreadsheet. I would like to display the text from another cell if the number entered in another cell is greater than or less than a certain number.
So - if the number in cell A is equal to or greater than 70 then the text displayed in cell B equals the text contained in cell C
Hope this makes sense.
Many thanks in advance.
regards,

Hello Lee,
The Numbers User Guide PDF available from the Numbers Help menu as a download is good reading for beginners. As a reference document, the iWork Formulas and Functions User Guide is also valuable.
The function you need is called "IF", and the syntax is: IF "logic-expression" is true, then do this, else do this. As a calculation in a cell, that would have the form: =IF("Cell A" is equal to or greater than 70, then display the content of cell C, else display "something else") You need to provide the "something else", which can be a null string, "", if you wish.
As you will find when you read the guide, the cells all have row and column address components where the column is identified by a letter of the alphabet and the row by a number. So If your data is in A1, your text string in B1 and your expression is in C1, you would write in C1:
=IF(A1>=70, B1, "")
Does this help?
Jerry

How to set the text of a cell in Numbers to vertical direction? Tks.

Hi
In Numbers, please tell me how to switch the text of a cell to vertical direction?
Tks.

Hi Kyle,
In Numbers, nothing having to do with a table can be rotated. (In Pages an entire Table can be rotated, but not text within a Table.)
There have been many suggestions posted here over the life of iWork for vertical labels. Most fall into three categories:
1. Type one letter, Option-Return, type another letter, Option-Return, and so forth.
2. Type label in a Text Box, rotate the box, position the box over the table, covering the cell where you need a label.
3. Create a PDF graphic with rotated text and insert it into table cell as Background Fill.
The third option is clearly the best. The steps for option three are:
Insert Text Box
Type label into the box
Rotate the text box
Select the text box (not the text inside the box)
Command-C
Switch to Preview.app
Command-N
Command-C
Switch to Numbers
Click on Cell where the label goes
Command-V
It sounds worse than it is. You can reuse the Text Box so you don't end up with a sheet full of them.
Regards,
Jerry

How do I move text within a cell down in "Numbers" please?

I am trying to move text within a cell down in Pages. I use one cell as a topic and then add text in the next row of a cell. It may seem strange to some but I have been doing it for years in Excel. Here is the best example I can give here:
Customer
Customer Notes
ABC Company
Imagine a long row of text here and I want to start a new line of text below this one without (within the same cell)
Text would continue here but still within the same cell (I use to be able to just hit return in excel)
Any ideas would be appreciated.
Thanks so much! ;-)
Thanks so much!

Thanks so much Wayne... I spent quite a while searching for this to no avail lol.Have a great day!

Vertical alignment of text in a cell doesn't work

In Numbers 3.2, the vertical text alignment seems to have no effect on the text. Whether I select the text itself, the cell, or the row, pressing one of the vertical alignment buttons for top, middle, or bottom does nothing.
I've searched through all the menus but I don't see anything to affect this. Alignment in the menu is of the left, right, justify variety, not top, middle, bottom.
My goal is to reduce the padding in a row so that I can squeeze the text right up to the cell borders, but Numbers doesn't seem to allow me to do this. Yet I have someone else's number sheet, and it's obviously possible since they have it in their sheet.
Thanks for any help,
Confused newb

AlizaG wrote:
Annoyingly, when I searched for my question I was only shown questions that were not related to this one. Now that I've posted it, the related questions are shown in the sidebar and lo and behold: other people have had this problem too...
The culprit is the automatic text inset of 4 pts. Drastically un-intuitive.
Aliza,
Only un-intuitive if you believe that most people would like their cell content lying right against the cell border.
Jerry

Regarding inserting a field or text in template cell

Hi Experts,
Please let me know how to insert a field or text in the Cell in template.
I created template
C1 1 14 20.00 MM 8.00 CM 4.00 CM 4.00 CM CM
i have 14 lines and 3 columns in it
i need to insert the feilds and text in it.
Please let me know ,how to proceed.
Thanks in advance.
regards
Vishnu

Hi,
To insert the text and field value inside the template you need to add insert the text inside the tempate node.
assign the text or field into the text and then decide the position of the ext in the templete in output condition tab or text.
insert the row and column number in the this to filed where you want to display the text.
for e.g if field needs to displayed in the 2nd row and 3rd column then mention line = 2 and column = 3 in the output tab of the text.

Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.? I want to alter the formatting (i.e., text and/or cell background color), but not cell content.

Is it possible to apply conditional formatting to a cell (or range) based upon a LOOKUP query to cell values in another sheet.?
I want to alter the formatting (i.e., text and/or cell background color), but not the content, of the target cell(s).

Hi Tom,
Your LOOKUP formula will return a value that it finds in the "other" table. That value can be used in conditional highlighting rules. (Numbers 3 calls it conditional highlighting, not conditional formatting. Just to keep us awake, I guess, but it works the same).
Please explain what you are trying to do.
Regards,
Ian.

Dragging Text in Table Cell

In older versions of Pages, dragging text from a table cell into another table cell would cause the 2 cells to swap text. In '09 the dragged text overwrites the text in the cell it's dropped into. Is there a way to go back to the old way?

No not that I know of.
I have tried all the possible keyboard combinations and none do what you want.
Peter

Styled Text in Table Cell

Hi,
I've got this problem: I'd like to insert a styled text in some cells of a JTable.
The text should be composed of two kinds of Font, to emphasize some characters in it.
Suppose I've done a class Test, that extends JPanel. In this class I've done a method appendChar(String c, boolean bol). With this method I can add a JLabel with only a single char (String of length 1) at a time. If bol is true, it emphasizes the char; if false, it uses the "default" font. For example:
"this is an example"
This class works fine, but I don't have any idea on how I could be able to insert a Test instance in a JTable cell.
I think I should create a class that implements TableCellEditor, or extends DefaultCellEditor.. but I don't know how this should be done.
If there is some other way to have some styled text in a table cell, tell me!

Hi,
AFAIK, the default renderer for a table cell is a JLabel in which you can display styled text using html. You would need to provide a custom editor only if the default textfield doesn't fulfil your needs. For rendering, you need to override the renderer.
Cheers,
vidyut

I want to add same value/text in every cell in a column in Numbers 3.0

I want to add same value/text in every cell in a column. For example, in all my file names are for pictures that are uploaded to a host site, but the name in the cell does not include the URL associated with it. Does anyone know how to be able to add text to a whole column in front of the current text already in that column?

Assume the filenames are in column C.
Let's says you want to add the text before each file name "http://www.apple.com/"
add a new column (let's say D) and add the formula:
D1="http://www.apple.com/"&C
this is shorthand for... in cell D1 type (or paste from here) the text ""http://www.apple.com/"&C" without the first and last double quotes
select D1, copy
select the column D by clicking the letter D at the top of the column, paste
The "&" is called the concatenate operator and joins two strings together

Smartforms - Text in a cell

Similar Messages

Maybe you are looking for