Smartview 11.1.2.3 - Planning connection does not allow reporting off Attribute Dimensions

Hello
In Smart View version 11.1.2.3 one now has a 'Planning' connection to connect to planning
This is very handy as one can report text instead of numbers for comment fields and smart lists
However, Attribute dimensions are not visible to use in the Planning connection.
This is quite a big issue as customers extensively make use of 'Attribute dimensions ' in reporting
Has anybody been able to use Attribute dimensions when using the planning connection?
Berndt

Attributes are available on Essbase connections and unfortunately not Planning.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

Web Analysis data layout does not reflect newly added attribute dimension

Hi,
We newly added one new attribute dimension. If any new report creation in Web Analysis reflect that dimension. However, the reports which are old(created before the addition of new dimension), does not show the newly added dimension.
Please advice.
Thanks,
Meenakshi

Thanks for this.
I have tried assigning the new DB connection. However, still it did not work. Does the data layout displays dimensions according to reports. I mean, can we restrict the visibility of dimension at report level? Please advice.
Thanks,
Meenakshi

User gets "This network connection does not exist" when she tries to log on to Terminal Server (2008 R2)

User gets "This network connection does not exist" when she tryes to log on to Terminal Server (2008 R2)
I got more than 100 users. Shes the only one getting is. We tried four computers (All Windows 7 Pro)
Nothing useful in event viewer to mention.

Hi,
Thank you for posting in Windows Server Forum.
Does that user able to login previously?
From your comment, it seems that there is some permission issue with that user. As you have checked that user with different system also. Please check that user is added under “Remote Desktop User” local group and also allowed “Allow log on through
Remote Desktop service” permission under group policy. Also please check that when user tries to login it uses “Domainname\Username” format.
In addition for a try, also check by disabling firewall on one particular system.
To add users and groups to the Remote Desktop Users group by using Local Users and Groups snap-in:
1. Click Start > Administrative Tools, Open Computer Management.
2. In the console tree, click the Local Users and Groups node.
3. In the details pane, double-click the Groups folder.
4. Double-click Remote Desktop Users, and then click
Add.
5. In the Select Users dialog box, click Locations to specify the search location.
6. Click Object Types to specify the types of objects you want to search for.
7. Type the name you want to add in the Enter the object names to select (examples) box.
8. Click Check Names.
When the name is located, click OK.
More information:
Remote Desktop disconnected or can’t connect to remote computer or to Remote Desktop server (Terminal Server) that is running Windows Server 2008 R2
http://support.microsoft.com/kb/2477176/en-us
Hope it helps!
Thanks,
Dharmesh

Adobe Connect does not show tool pointer/cursor when sharing Photoshop...

I am an online instructor and one of the courses I teach is a Photoshop course. Each week I host a Live Lecture session where we use Adobe Connect to demonstrate techniques and tools in Photoshop CS6.
I am receiving several complaints from students because Adobe Connect does not correctly show my cursor/pointer when it changes for each tool in Photoshop. All the students see is an arrow with a small icon of a face/monitor.
This is confusing to the students, because I am trying to demonstrate how to use a tool and they are unable to see the actual tool. For example, when I select the brush tool - they should be able to see the brush circle as the cursor. I then demonstrate how to resize the brush - but they cannot see it. Another example is any of the healing/cloning tools. If I select the healing brush tool, they cannot see the circle (brush). I then demonstrate how to record a healing point by selecting the Option (alt) key - but again the students cannot see the pointer change to the crosshairs to record the healing point - as all they see is the arrow with icon at all times.
Students are complaining that they are not able to comprehend what I am demonstrating because they are not able to get the full affect of the demonstration without seeing it how it should be. Prior to switching to Adobe Connect, we used WebEx - which showed the students everything correctly as I was demonstrating it. I was amazed to learn that Adobe Connect does not show everything - especially since I am using another Adobe program within Adobe Connect - you would think they would be fully compatible and able to show everything.
Thank you

I just saw this option for the first time last week. Very exciting to see it finally in Connect! There is a small amount of lag for the viewers, but nothing that can't be compensated for.

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

I want to mirror an iOS device to my computer for demonstration and training purposes. I cannot use Airserver as my company VPN does not allow the connection. Is there a hardware solution instead?

Shoeb, hi.
Thanks for replying and apologies for my tardiness in responding. I have just completed a re-creation of my web page using CSS/HTML rather than XML/XSLT and now I find that when saving in MHT format the watermark/background image is saved, which is nice, but trying to save it as 'webpage complete' under 'save as' in the browser still does not work. (For those who are new to Firefox, MHT files are not supported by the browser, but using the FF extention UnMHT one can open such files and save web documents as MHT files, meaning no accompanying folder is required to properly view the file.)

Acrobat does not allow connection to

Need help with this error message please. Using Win7, saved a Word 2010 table of contents with multiple links to pdf files across internal servers as a PDF. Also created the word doc w/multiple pdf links as a PDF file using acrobat9 standard and have same problems. when a user with Adobe Reader 8+ clicks on a pdf link in the PDF table of contents file, they get an error message Acrobat does not allow connection to: and they cannot open the linked file. However, I am able to open the files using the same links with both reader and acrobat.
This worked previously until we upgraded to these versions of software... the error message shows a number of % signs and multiple ////. However, i can open the fiile but others cannot.
anyone have any ideas or is this a fix that i need to download?

not sure where my previous reply went; however, there are numerous machines at varuious sites that will be accessing this server/folder. I am not sure if it is a trusted sites issue as the file lists numerous PDF links and some of them open to the respective pdf file and others recieve the mssage. All the files reside on the same server within the same main folder and within subfolders. never had the problem before. the users can open some of the linked files and others the connection msg appears. I however, am able to open the same links they get the error on. I am totally baffled by this and have been troubleshooting for weeks now. I just had acrobat X installed to see if that would help but still problem. I also saved the word doc (2010) as pdf (which lists the links to the other pdfs) but users still have same problem. there are approx 75 links within this doc and I truly hope we don't have to relink everything..

JMS Adapter (for DI) does not allow passing username and password to JMS connection

Post Author: PLed76
CA Forum: Data Integration
JMS Adapter (for DI) does not allow passing username and password to JMS connection. It has those fields only for MSMQ. Our Production environment does not allow us to connect to JMS (we use Tibco EMS) anonymously, so it prevents us from use of Data Integrator. Is there any way to pass those params, or obtain the correct version of JMS Adapter, or obtain source codes of the JMS Adapter so we can correct them ourselves (we can send you the corrected sources back) ? Thanks in advance for any help. (PL)ed76 Renaissance Capital

Bump - Were having the same issue.
Has anyone found a way to connect to Tibco with a user/pwd?
Version 14.0.297.

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

WRT54G does not allow wireless connections

I installed a WRT54G V8 for my neighbor. After much pain and fights with the wizards I got it to where it works with wired computers. I set up the wireless and named it, selected security, recorded the Key, even had the wizard record the computer setup program on a USB drive.
The two wireless computers I have tried can both see the network but clicking connect does not get me the enter key window. Actually nothing happens after showing connecting for about a minute. I tried the setup program and it said it could not set up the computer. I tried setting up the parameters manually and then connecting nothing happens.
But the routers DHCP table shows the names of the two wireless computers as being connected.
Some time when I try to connect (with manual entered data) the network page will show "Not Connected" over the top of the network name. But the button at the bottom of the page has switched from "Connect" to "Disconnect" and the machine is in the DHCP table.
Any suggestions?

Greyhair wrote:
I am using XP SP2 on both of the wireless computers and I am using the default windows client. In the wireless networks tab is where we tried setting up the network manually. Are you saying that with a WRT54G I can have only one wireless network installed on the machines?
I will try it on one of the machines this afternoon when I go over to try again to get it to work.
Why is this so hard!??!
Hi greyhair ,
Ridcully did provide some good information.
The wireless network tab .
for that ,
strt>control panel>network connections or (network and internet connections) icon> network connections
Right click on the wireless network connection listed
go to properties ,
here you will find three tabs - general >wireless networks>advanced
you need to click on Wireless network
and remove preffered networks from the network list (even yours )!
and click ok !
and again , right click on wireless network connection > go to View aivialable wireless networks ....try connecting to your network by first clicking (highlighting)
on the network name , and then click connect.
any problem , feel free to ask here.
pe@c3
~~~Nobudy's Perfect , i try To Be So ! Each n every moment of maH LYF , AND I THINK dat wats make Me "Different" From others....~~~

Submit PDF Form by Email (does not allow connection)

It's been sometime since I have created a PDF which included a "Submit by Email" button. I opened the original form and changed the email addresses, saved it, then opened it in Reader. Whenever I try to submit it by email a "Security Block" window pops up stating "Acrobat does not allow connection to:" I have tried to call and pay for support but get the run around. I've searched the web and only found where I need to "Extend the Rights to Reader" which I did to no avail. I've even rebuilt the form from scratch...nothing.
Any help would be much appreciated!
Thanks....

I created the form first in Microsoft Word, then "printed" it to create a PDF. I then use Acrobat to create a bunch of fields, and set the form for distribution.
When the user completes the form in Acrobat, and clicks on the "Submit" button, an email is created with the form as an attachment, and the body of the message is this:
Instructions to add this form to a responses file:
1. Double-click the attachment.
2. Acrobat will prompt you to select a responses file.
Those are the instructions I was referring to. The question is, is there any way to change or eliminate those instructions?

ERecruiting - Data Overview - "Acrobat does not allow connection to..."

Hello gurus,
how is it going?
I'm facing one strange problem in eRecruiting.
We've got customized smartforms for Candidate and Requisition overview.
On Candidate overview we've got part, where URL links of assigned requisitions are shown.
By opening these links, it should open Requisition overview page.
But when I want to open this link, I'm getting popup window, where is written:
"Acrobat Does not allow connection to..."
I've got Acrobat Reader X, I've updated "Trust manager" and "Security (Enhanced)" also in Page preferences.
But still facing this error.
Could you advice me, how I can solve it?
I've already read many pages on google, but still nothing....
Many thanks in advance.
Regards, Luke.

Hi,
first I have a question:
You say you have the Candidate Overview Smartforms containing links to a requisition Smartforms?
So this is a custom development isn't it?
Is the Adobe Acrobat opening within a Browser window or as a dedicated programme?
If Adobe is opened separately please check, that the Browser Integration of Adobe is active within Adobe's settings.
Links within Smartforms are relative links in general and therefore just working when called in-browser.
Best regards
Sebastian

Acrobat does not allow connection to a certain website

I have a PDF with a link to a pdf-file on a certain website. When one user clicks the link it says ( it is in dutch, so i try to translate):
Acrobat does not allow connection with www.XXXX (the name of the link where the link addresses to)
We work in Citrix, most users do not have the problem, only one user has.

Compare the Security (enhanced) and Trust Manager settings for yourself and the user on the same machine. If they are not identical, make them so. If that doesn't work,
I'm assuming the msg appears in a dialog and not the yellow msg bar.
Ben

Oracle BAM Plan Monitor does not start

Hello all,
the Oracle BAM Plan Monitor does not start in when I execute the start scripts.
It tells my that the name of the service is invalid.
Is there any possibility to check on the configuration for that service name?
I have also checked on the event log of my Windows machine. There are a couple of strange entries coming from the Oracle BAM Engine:
EventEngine: ADC Context exception ADC Server exception in GetUserGroups(): 2.
ActiveDataCache: Caught exception while validating user NT-AUTORITÄT\SYSTEM: The RPC-Server is not available
Maybe someone has a clue how to resolve this issue.

Hi
Are you using a valid user name and passwd to access the plan monitor?
Did you set up a user called 'BAM' in your Enterprise Link? Normally this user will get created automaticaly while installing BAM. If it doesnt exist, you will have to create a user called BAM in EL with a blank password.
Please follow the post installation document, that is having more details.
Thanks
Laj

When the Wifi is connected, the iphone seems to search for some site and if firewall does not allow the access to that site, it disconnects the connection to Wifi. Can anyone help on this?

When the Wifi is connected, the iphone seems to search for some site and if firewall does not allow the access to that site, it disconnects the connection to Wifi. Can anyone help on this?

Hi SBEG2015,
I'm sorry to hear you are having these issues with your iPhone. Based on your description of what has happened and the symptoms you are seeing, you may need to have your iPhone evaluated and/or serviced. You may find the following page helpful:
Apple - Support - Service Answer Center
Regards,
- Brenden

List of planning applications does not appear

Hello,
in EAS i create New Rule -> in Rule Editor displays in right pane -> i click on Select outline -> The Select Database Outline dialog box displays -> when i click on +planning -> nothing is displayed: the list of my planning applications does not appear !!
is this normal?
N.B : i use hyperion planning V11.1.1.3
cheers,

Did you log into the planning application first before logging into EAS, if the planning application service was recently restarted and there have been no logins to the applications then they won't appear.
As a test log out of EAS, log into one of the planning applications, log into EAS
Also be sure that the planning applications have been created to use Business Rules and not Calculation Manager if you want to use EAS.
If you are still having issues then it may be worth having a read of the following document on Oracle Support - "Troubleshooting Hyperion Business Rules Issues [ID 763345.1]"
Cheers
John
http://john-goodwin.blogspot.com/

Smartview 11.1.2.3 - Planning connection does not allow reporting off Attribute Dimensions

Similar Messages

Maybe you are looking for