SMB Remount Failed for url (serverpath) with error =17
I keep getting the following messages in the system log. Does anyone know what the error 17 is?
7/15/14 7:30:39.000 AM kernel[0] smbfs_down: Remounting fs01/USERS$
7/15/14 7:30:39.000 AM kernel[0] smbfs_down: Remounting fs01/DEPTS
7/15/14 7:30:39.000 AM kernel[0] smb_iod_reconnect: Reconnected share USERS$ with server fs01
7/15/14 7:30:39.000 AM kernel[0] smb_iod_reconnect: Reconnected share DEPTS with server pmfs01p
7/15/14 7:30:53.650 AM smbremountserver[1913] SysctlRemountFS: failed for 0x2d000004:0x15 - File exists
7/15/14 7:30:53.650 AM smbremountserver[1913] smb_remount_with_fsid: remount failed for url //(userID)@fs01/dat/users with error = 17
7/15/14 7:30:58.166 AM smbremountserver[1912] SysctlRemountFS: failed for 0x2d000003:0x15 - File exists
7/15/14 7:30:58.166 AM smbremountserver[1912] smb_remount_with_fsid: remount failed for url //(userID)@fs01/dat/DEPTS with error = 17
Please add the fully qualified domain name (FQDN) & Ip address of your server to the hosts file.This would solve your problem.
Similar Messages
-
Directory for archiving files with errors
HI ,
My Scenario is file to RFC Asynch.
when ever the PI picks file from the source directory that file need to delete from the path and need to be archived to some other patch.
And if the file has wrong data it need to archive to error archive folder.
For this I used Archive processing in filesender adapter and I also used directory for archiving files with errors(for wrong data files).
Now the files are arching successfully in the given archive folder for successful messages. But the error files (wrong data which are throwing mapping error in MONI) are also archiving in the same archive folder.
But these error files need to archive in error archive folder.
How can I achieve this?
Thanks in Adv..
Vankadoath.you can use raja's logic ..........in addition in second receiver do a simple mapping UDF to delete the file from the SUCCESS folder. otherwise your file will be archived in both the folder success and errror
see this code.
DynamicConfiguration conf = (DynamicConfiguration) para.get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey keyFileName1 = DynamicConfigurationKey
.create("http://sap.com/xi/XI/System/File", "FileName");
inputFileName = conf.get(keyFileName1);
*File f1 = new File("/usr/sap/XX/"+keyFileName1);*
*boolean success = f1.delete();*
*if (!success){*
*System.out.println("Deletion failed.");*
*System.exit(0);*
*}else{*
*System.out.println("File deleted.");* -
SMS_STATE_MIGRATION_POINT Health check failed for port 80 with status code 500
My SMS_STATE_MIGRATION_POINT gets a red cross because the health check of the SMS_STATE_MIGRATION_POINT is “sometimes” failing. I don’t understand why its fails sometimes? Any suggestions.
gr, Iwan
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:51:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 2:56:29 PM 22044 (0x561C)
Checking store for cleanup of failed or stale state stores... SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
STATMSG: ID=6207 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_STATE_MIGRATION_POINT" SYS=SWAMS0083 SITE=P01 PID=13560 TID=22044 GMTDATE=Thu Apr 15 13:01:29.777 2010 ISTR0="500" ISTR1="Internal Server Error" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0 SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:01:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:06:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:11:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:16:29 PM 22044 (0x561C)
Call to HttpSendRequestSync succeeded for port 80 with status code 200, text: OK SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Health check operation succeeded SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:21:29 PM 22044 (0x561C)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Health check request failed, status code is 500, 'Internal Server Error'. SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)
Completed availability check on local machine SMS_STATE_MIGRATION_POINT 4/15/2010 3:26:29 PM 22044 (0x561C)I'va got the following event in my security event log this is strange because the Windows Firewall is off and the problem is not always there, 8 out 10 time the health checks passes.
Log Name: Security
Source: Microsoft-Windows-Security-Auditing
Date: 4/15/2010 7:01:27 PM
Event ID: 5159
Task Category: Filtering Platform Connection
Level: Information
Keywords: Audit Failure
User: N/A
Computer: ********
Description:
The Windows Filtering Platform has blocked a bind to a local port.
Application Information:
Process ID: 13560
Application Name: \device\harddiskvolume2\programs (x86)\microsoft configuration manager\bin\i386\smsexec.exe
Network Information:
Source Address: 0.0.0.0
Source Port: 9000
Protocol: 17
Filter Information:
Filter Run-Time ID: 0
Layer Name: Resource Assignment
Layer Run-Time ID: 36 -
Autoconfig failed for jtfictx.sh with DRG-10595
After migrating the Oracle Applications 11.5.10.2 from Solaris to Linux the autoconfig failed for Application server with the following:
Executing script in InstantiateFile:
/u01/applvcaprod/vcaprodcomn/admin/install/VCAPROD_yavcaoraprod/jtfictx.sh
script returned:
jtfictx.sh started at Mon Nov 7 16:32:11 EST 2011
SQL*Plus: Release 8.0.6.0.0 - Production on Mon Nov 7 16:32:11 2011
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter value for 1: Enter value for 2: Enter value for 3: Connected.
DECLARE
ERROR at line 1:
ORA-29874: warning in the execution of ODCIINDEXALTER routine
ORA-29960: line 1,
DRG-10595: ALTER INDEX JTF_AMV_ITEMS_URL_CTX failed
DRG-10561: index JTF_AMV_ITEMS_URL_CTX is not valid for requested operation
ORA-06512: at "SYS.DBMS_SYS_SQL", line 909
ORA-06512: at "SYS.DBMS_SQL", line 39
ORA-06512: at line 96
Also tried to build these indexes by running jtfiaibu.sql didn't help:
sqlplus apps/apps @jtfiaibu.sql JTF JTF APPS
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: APPS.jtf_url_datastore
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 364
ORA-06512: at "SYS.DBMS_SYS_SQL", line 909
ORA-06512: at "SYS.DBMS_SQL", line 39
ORA-06512: at line 37
Greatly appreciate any help on this.Thanks for the update. I already tried all the above mentions documents it didn't wotk. Also there are no invalid objects in CTXSYS schema and the database is 10.2.0.5
As i specified earlier witht he doc 1271186.1 when i try to execute the
sqlplus apps/apps @jtfiaibu.sql JTF JTF APPS
it failed with the following .
ERROR at line 1:
ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
ORA-20000: Oracle Text error:
DRG-10700: preference does not exist: APPS.jtf_url_datastore
ORA-06512: at "CTXSYS.DRUE", line 160
ORA-06512: at "CTXSYS.TEXTINDEXMETHODS", line 364
ORA-06512: at "SYS.DBMS_SYS_SQL", line 909
ORA-06512: at "SYS.DBMS_SQL", line 39
ORA-06512: at line 37 -
HI all.
New install of 2008R2 on HP DL-380 G6. I have created (several) VM's none of which will start. If I remove the IDE Hard Disk and add a DVD of the OS ISO, it will boot and start the install (although with no HDD).
It seems like the IDE controller is working ok - it is what the DVD drive is using, but it cannot mount a VHD. The error indicates a driver is not working (although the DVD on IDE works fine) so something to do with VHD? I can attach the VHD
in disk management, so it does not seem corrupt - again I have tried with both dynamic and fixed VHDs.
Full error is:
'Test1' failed to start. (Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1' Microsoft Emulated IDE Controller (Instance ID {83F8638B-8DCA-4152-9EDA-2CA8B33039B4}): Failed to Power on with Error 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
'Test1': Failed to open attachment 'C:\Users\Public\Documents\Hyper-V\Virtual hard disks\New Virtual Hard Disk.vhd'. Error: 'The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.' (0x80070422).
(Virtual machine ID 4320D2D6-DF7E-40D2-BD0F-9562CBB9F052)
Any Ideas?Hi ,
Did you try to disable the services , if they are exsit :
HP Smart Array SAS/SATAEvent notification
HP Insight storage agents
Then restart your server .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Createprocess failed for AppletViewer Windows NT error #193
Hi all,
I am evaluating jdev 2.0 and I have created a workspace and
project on one machine which has a wizard generated master-
detail applet. I can log on to the DB and browse records
successfully in run mode.
When I copy this directory and all associated files to a second
machine and attempt to run it, I get the following error:
createprocess failed for AppletViewer Windows NT error #193
I then created a new workspace/project as above and I still get
this error message.
HELP! TIA Paul Valdetaro
nullThis is not the problem - I am the administrator on both
machines. I have tried the suggested solution in any event, and
there is no change. I have tried reinstalling your product and
this produces the same result. The weird thing thing is that
the infobus data wizard works fine in design mode but the applet
bombs in run mode.
JDeveloper Team (guest) wrote:
: Hi
: Looks like some config problem with NT. You may have to check
: what WindowNT error #193 means with your sysadmin or so
: for ex:-
: createprocess failed for appletviewer, Windows NT error #5
: is ERROR_ACCESS_DENIED
: For the above example eroor look at who ownership and
protection
: of the exe(s) and dlls in your installation of jdeveloper.
: One suggestion for the above example problem is to select the
: JDEV home directory and change the permission of all files &
sub
: directories to "full control for Everyone".
: regards
: Paul Valdetaro (guest) wrote:
: : Hi all,
: : I am evaluating jdev 2.0 and I have created a workspace and
: : project on one machine which has a wizard generated master-
: : detail applet. I can log on to the DB and browse records
: : successfully in run mode.
: : When I copy this directory and all associated files to a
second
: : machine and attempt to run it, I get the following error:
: : createprocess failed for AppletViewer Windows NT error
: #193
: : I then created a new workspace/project as above and I still
get
: : this error message.
: : HELP! TIA Paul Valdetaro
null -
How to deactivate *Schedule Background Job for Work Items with Errors* SWU3
Hello Guys,
Can any one tell me how do I DEACTIVATE Schedule Background Job for Work Items with Errors in sap workflow SWU3.
Currently it is green which I don't want. I want to stop this service.
Regards
NKHello,
You could also just stop the job in tx SM37.
But why would you want to do this? As a test?
regards
Rick Bakker
hanabi technology -
Encoding failed in "file name" with error: -43
Hi!
I've tried everything but still, after about 20 hours of encoding DVD Studio Pro just stoppes, saying "encoding failed in "file name" with error: -43". The movie is in DV PAL format and made in Final Cut Pro version 5. I'm using DVD Studio Pro 4.0. The movie is about 1 hour and 30 minutes long and I'm trying to put it on a double layer DVD. I've tried to shorten it (it was nearly 2 hours before), but that didn't help. I also tried to shorten it even more and put it on a single layer DVD, but still the same message.
So if somebody has any idea of how I can solve this problem, please let me know as soon as possible!
Thank you!Error -43 means "File not found." If you are compressing from a reference movie, make sure that all referenced movie clips are present on the disk and that permission settings are not preventing DVD Studio Pro from accessing them.
Error -1309 means "Out of bounds." This means that the source file is pretending to be bigger than it actually is.
So it sounds like there are issues with your source movie.
P.S. Compressor has a much better MPEG-2 encoder and I would recommend using that instead. -
Operation Unprepare failed for application 'createObject'. Error - weblogic
I am getting this exception when i undeploy my application in JDev 11.1.1.3.0
has anyone else encountered similer problem ?
<Aug 18, 2010 3:53:16 PM IST> <Warning> <Deployer> <BEA-149251> <Operation Unprepare failed for application 'createObject'. Error - weblogic.utils.ErrorCollectionException:
There are 1 nested errors:
java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1483)
at oracle.adf.share.config.ADFConfigImpl.releaseResources(ADFConfigImpl.java:674)
at oracle.adf.share.config.ADFConfigFactory.cleanUpApplicationState(ADFConfigFactory.java:432)
at oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener.postStop(ADFApplicationLifecycleListener.java:96)
at weblogic.application.internal.flow.BaseLifecycleFlow$PostStopAction.run(BaseLifecycleFlow.java:351)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1233)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:159)
at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:495)
at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:205)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.silentUnprepare(AbstractOperation.java:689)
at weblogic.deploy.internal.targetserver.operations.RemoveOperation.removeDeployment(RemoveOperation.java:313)
at weblogic.deploy.internal.targetserver.operations.RemoveOperation.doCommit(RemoveOperation.java:114)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1449)
... 30 more
Caused by: java.lang.NullPointerException
at oracle.adf.share.http.ServletADFContext.initialize(ServletADFContext.java:423)
at oracle.adf.share.http.ServletADFContext.initThreadContext(ServletADFContext.java:351)
at oracle.adf.share.http.ServletADFContext.initThreadContextIfNeeded(ServletADFContext.java:284)
... 35 more
weblogic.utils.ErrorCollectionException:
There are 1 nested errors:
java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1483)
at oracle.adf.share.config.ADFConfigImpl.releaseResources(ADFConfigImpl.java:674)
at oracle.adf.share.config.ADFConfigFactory.cleanUpApplicationState(ADFConfigFactory.java:432)
at oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener.postStop(ADFApplicationLifecycleListener.java:96)
at weblogic.application.internal.flow.BaseLifecycleFlow$PostStopAction.run(BaseLifecycleFlow.java:351)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1233)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:159)
at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:495)
at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:205)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.silentUnprepare(AbstractOperation.java:689)
at weblogic.deploy.internal.targetserver.operations.RemoveOperation.removeDeployment(RemoveOperation.java:313)
at weblogic.deploy.internal.targetserver.operations.RemoveOperation.doCommit(RemoveOperation.java:114)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1449)
... 30 more
Caused by: java.lang.NullPointerException
at oracle.adf.share.http.ServletADFContext.initialize(ServletADFContext.java:423)
at oracle.adf.share.http.ServletADFContext.initThreadContext(ServletADFContext.java:351)
at oracle.adf.share.http.ServletADFContext.initThreadContextIfNeeded(ServletADFContext.java:284)
... 35 more
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:207)
at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1233)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
Truncated. see log file for complete stacktrace
Caused By: weblogic.utils.ErrorCollectionException:
There are 1 nested errors:
java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1483)
at oracle.adf.share.config.ADFConfigImpl.releaseResources(ADFConfigImpl.java:674)
at oracle.adf.share.config.ADFConfigFactory.cleanUpApplicationState(ADFConfigFactory.java:432)
at oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener.postStop(ADFApplicationLifecycleListener.java:96)
at weblogic.application.internal.flow.BaseLifecycleFlow$PostStopAction.run(BaseLifecycleFlow.java:351)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1233)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:159)
at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:495)
at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:205)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.silentUnprepare(AbstractOperation.java:689)
at weblogic.deploy.internal.targetserver.operations.RemoveOperation.removeDeployment(RemoveOperation.java:313)
at weblogic.deploy.internal.targetserver.operations.RemoveOperation.doCommit(RemoveOperation.java:114)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1449)
... 30 more
Caused by: java.lang.NullPointerException
at oracle.adf.share.http.ServletADFContext.initialize(ServletADFContext.java:423)
at oracle.adf.share.http.ServletADFContext.initThreadContext(ServletADFContext.java:351)
at oracle.adf.share.http.ServletADFContext.initThreadContextIfNeeded(ServletADFContext.java:284)
... 35 more
at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:207)
at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1233)
at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
Truncated. see log file for complete stacktraceHi,
Are you still getting this error, or have you solved it? I'm noticing the same exception myself.
Barry. -
Validation of header fails againts XSD definition with error (BEA-382505 )
Hi
Were facing a problem when we try defining xsd:string in proxy services XSD.
Were using ALSB 2.6 on Windows
Validation of header fails againts XSD definition with error :
BEA-382505
ALSB Validate action failed validation
Invalid xsi:type qname: 'xsd:string' in element bruger@http://entity/infrastruktur/subject_v3
aa94aec2-c699-456f-b9b3-c61a1bc06511
Validation is performed against an XSD containing the header defintion.
ALSB validation fails while other tests show that XML document is valid against its definition (validated by XMLSpy, jdk 5 JAXB based marshalling/unmarshalling and jdk 5 JAXP validation code).
Anyone have an idea way this happens ??
Edited by henrikbec at 08/03/2007 1:39 AMhi
a crap. No this should have been writen in the AquaLogic Service Bus Newsgroup -
"Refresh after" insert fails for DB-View with INSTEAD OF Triggers
Hi,
I have a database view with INSTEAD OF triggers defined for INSERT, UPDATE, DELETE.
For some EO attributes the refresh after insert and update is defined.
Posting to database fails.
According to Database 9.2 Manual and a previous thread (BC4J and Updatable Views the RETURNING clause is not allowed for database views with INSTEAD OF triggers.
Is there a workaround so the refresh after is done, but without the RETURNING feature?
I only need to refresh some values. The PK i can set in the create method of the EO so refresh via a additional SELECT would be possible.
If not Feature Request:
Add the possibility to do the "refresh after ..." with a 2nd SELECT using the PK instead of using the RETURNING clause.
Of course then it is not possible to set the PK in the database trigger. PK has to be set in the create method of the EO.
Thanks,
Markus
GEMS ITHi Markus,
Turning on the stack trace (-Djbo.debugout put=Console - in the Project/runner) did help and I should have done it sooner. Turns out that when I constructed my EO based upon a database view - I should have left out the PKs of the base tables.
In my case, I am using an "Instead Of Trigger" to populate a multi-table arrangement (parent - child - grandChild - greatGrandChild relationship) where all base tables are using dbSequence/dbTriggers.
Final analysis - I would like to see BC4J handle this situation. I do not want to use View-Links and I should * not * have to resort to stored procedures and BC4J/doDML. If I construct a DB View this is participating in an parent - child - grandChild - greatGrandChild relationship that are using dbSequence/dbTriggers, then BC4J should be smart enough to construct VO knowing that I want to do insert, update, delete, selects - based upon this structure.
Thanks Markus,
Bill G... -
Policies for URL's with question mark (?) in Access Manager 7.1.2
I have an environment with Access Manager 7.1 patch 2 and OpenSSO 3.0 Web Policy Agent (Apache). Apparently, with the 3.0 agents the wildcard * no longer matches the query string separator (?) in a URL accordining to Appendix C in the manual (http://download.oracle.com/docs/cd/E19681-01/820-5816/820-5816.pdf).
ie; http://AgentHost.com:8080/sampleapp/main.jsp?language=en&country=US.
The solution, is to add a policy similar to this - http://example.com:80/*?*, it requires a wildcard before and after the ?, but the ? must be specifically included.
My problem is that in AM 7.1 patch 2 it will not allow me to create a policy with that format, *?*. When I try, it says it is successful but when I view the policy the ?* is stripped off leaving only the first wildcard.
Has anyone delt with this issue? I am looking for a solution with Access Manager 7, upgrading to OpenSSO 8.x is not an option at this time.Apply AM 7.1 patch3 or above, preferably the latest which is patch 5 or 6 (can't remember)
-
DIServer insert operations for sales orders with error
DIServer insert operations for sales orders with
That even though the insert is inserted DocDueDate DocDueDate it says error.
Subtracting the value of the format 'yyyy-mm-dd', 'yyyy/mm/dd', 'mm-dd-yyyy', 'mm/dd/yyyy' put all reporting
When the input is entered DocDueDate ShipDate also put together ... but I get an error.
The error message 'env: Receiver-10Enter due date [ORDR.DocDueDate] 171AddObject2EEE7D98-AB71-464A-93AB-933F0AD3D4DC'
Purchase order entered into the normal value because the xml is missing or wrong with you.
Please answer all the possibilities that can be resolved
This Xml used.
"<BOM>" +
"<BO>" +
"<AdmInfo>" +
"<Object>oOrders</Object>" +
"</AdmInfo>" +
"<QueryParams>" +
"<DocEntry />" +
"</QueryParams>" +
"<Documents>" +
"<row>" +
"<DocType>I</DocType>" +
"<DocDate>2012-01-11</DocDate>" +
"<DocDueDate>2012-01-11</DocDueDate>" +
"<CardCode>CD00001</CardCode>" +
"<Address>Anymode</Address>" +
"<DocCurrency>KRW</DocCurrency>" +
"<Comments>[sales orders] LGU TEST</Comments>" +
"<TaxDate>2012-01-11</TaxDate>" +
"<JournalMemo>JournalMemo</JournalMemo>" +
"<Address2>Addr</Address2>" +
"<BPL_IDAssignedToInvoice>1</BPL_IDAssignedToInvoice>" +
"</row>" +
"</Documents>" +
"<Document_Lines>" +
"<row>" +
"<ItemCode>ACDT0100ET</ItemCode>" +
"<Quantity>1</Quantity>" +
"<Price>5000</Price>" +
"<DiscountPercent>10</DiscountPercent>" +
"<WarehouseCode>A100</WarehouseCode>" +
"<VatGroup>A2</VatGroup>" +
"</row>" +
"</Document_Lines>" +
"</BO>" +
"</BOM>";I had the same error change the Date to the format yyyymmdd, and problem solved.
-
Failed to get exclusive lock on the Extensible Firmware Interface (EFI) system partition.
[ Name] Microsoft-Windows-Backup
[ Guid] {1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}
EventID 517
Version 0
Level 2
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2012-09-13T02:01:26.193377500Z
EventRecordID 134130
Correlation
- Execution
[ ProcessID] 13508
[ ThreadID] 552
Channel Application
Computer SERVER.srv.local
- Security
[ UserID] S-1-5-17
- EventData
BackupTime 2012-09-13T02:00:15.711673900Z
ErrorCode 2155348254
ErrorMessage %%2155348254Shaon,
I am receiving an identical error message as the original poster.
Let me give you some information on my setup and what I have already tried.
I am running a Windows Server 2008 R2 domain controller with SP1 installed. The system also runs MS SQL 2008 and IIS. All critical and recommended updates are installed.
The server backs up to a set of one of two external hard drives over USB 2.0 every night using Windows Backup. The external hard drives are encrypted using BitLocker and rotated offsite every week. We had no problems until 27 November 2013. On
that date I installed the November Windows updates and rebooted. Backups have not worked correctly since that time.
The server has two hard drives. The first one contains an 100 MB EFI partition (created for the IBM System x3200 M3 server EFI hardware although it appears to be entirely empty). The second partition contains the OS and the SQL databases. The
second hard drive contains shared data files. None of the partitions are close to being full.
The backup fails with the following error in the Windows Backup interface:
EFI System Partition: Windows Server Backup failed to get an exclusive lock on the EFI system partition. Detailed error: Access is denied.
The event viewer contains the error listed by the original poster (in the detailed view). The general view has this description:
The backup operation that started at <time> has failed with the following error code '2155348254' (Windows Backup failed to get an exclusive lock on the EFI system partition (ESP). This may happen if another application is using files on the
ESP. Please retry the operation.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
This error is thrown about 1 minute after the backup begins. After encountering the error with the EFI partition the backup exits and does not attempt to backup the other partitions.
The most interesting detail about the problem is that if I reboot the server and immediately perform a backup it completes successfully. If I reboot the server and wait approximately an hour before starting the backup it will fail. The backups
will continue to fail until the server is rebooted, at which point I if a backup is started immediately it will succeed but all future backups will fail. Therefore, it seems that Windows Backup has access to the EFI partition immediately after a reboot
but loses access for some reason close to the hour mark (this is an estimate based on a little experimentation but not an exact number).
Reading the little bit of information available online for this error message I have tried disabling our antivirus (Kaspersky) with no effect. I have also replaced the first hard drive in the server that contains the EFI partition with not effect (the
old hard drive imaged to the new hard drive with no errors, but backups still fail with the new hard drive). Backups fail with either external hard drive connected, so it is unlikely that the external hard drive is the problem. I have erased all
the Windows Backup settings including wiping all data on the external backup drive and created a new backup with no effect. I attempted to not backing up the EFI partition but it is required for the system state. I have reviewed all the Windows
updates installed in 27 November 2013 but none of the KB articles reference anything that I could possibly see related to the backup except for possibly the installation of .NET 4.5.1. However, I do not believe that Windows Backup uses .NET. 'Vssadmin
list writers' does not list any obvious errors.
At this point I am stymied except to think that I have some esoteric hardware failure. I have contacted IBM support who ran an extensive hardware diagnostic which showed no hardware issues.
I run several other similar Windows Server 2008 R2 systems, but none of them are on this model of hardware and none of them have an EFI partition. They all installed the same November Windows Updates. All of them are able to backup to external
hard drives without issue.
Any support you can provide would be greatly appreciated. -
Hi,
I have a sccm 2007 infrastructure with multiple site. from some period of time one site start to have problems after some switches changes.
I try to locate the problem but until now no succes.
Any ideea?
Thksmp.msi log
Property(S): SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\WINDOWS\system32\
Property(S): X64Perf.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\WINDOWS\system32\CCM\X64Perf\
Property(S): CCMSERVERDATAROOT = d:\sms
Property(S): Incoming.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = d:\sms\CCM\Incoming\
Property(S): Outgoing.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = d:\sms\CCM\Outgoing\
Property(S): CcmSystemVDirName = CCM_System
Property(S): CcmSystemRegVDirName = CCM_System_WindowsAuth
Property(S): CcmSystemAltAuthVDirName = CCM_System_AltAuth
Property(S): System.8D24F0F7_99DC_460C_9DA6_4193612E0D59 = C:\WINDOWS\system32\CCM\ServiceData\System\
Property(S): IA64Dir.181B4E66_9269_4E84_9E55_B6E7B91A7472 = C:\WINDOWS\system32\CCM\IA64\
Property(S): System.181B4E66_9269_4E84_9E55_B6E7B91A7472 = C:\WINDOWS\system32\CCM\ServiceData\System\
Property(S): x64Dir.6E186A08_E33E_4FBC_A39A_E3456945465F = C:\WINDOWS\system32\CCM\x64\
Property(S): System.6E186A08_E33E_4FBC_A39A_E3456945465F = C:\WINDOWS\system32\CCM\ServiceData\System\
Property(S): SMSCACHEDIR = Default
Property(S): SMSCACHEFLAGS = Default
Property(S): DISABLESITEOPT = Default
Property(S): DISABLECACHEOPT = Default
Property(S): SMSCACHESIZE = 5120
Property(S): x64.1A064B3F_A0C0_4EAC_8EE8_5AA5F0B33E3E = C:\WINDOWS\system32\CCM\x64\
Property(S): IA64.15899AB9_39B9_4695_BC16_3CCBF38F7EEB = C:\WINDOWS\system32\CCM\IA64\
Property(S): CCMINSTALLMSMQ = FALSE
Property(S): CCMINSTALLMP = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): ARPNOREMOVE = 1
Property(S): ARPNOMODIFY = 1
Property(S): CCMENABLELOGGING_Default = FALSE
Property(S): CCMLOGLEVEL_Default = 1
Property(S): CCMLOGMAXSIZE_Default = 2000000
Property(S): CCMLOGMAXHISTORY_Default = 1
Property(S): SecureCustomProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;SMSUPGRADEPRODUCTS;CCMSERVERDATAROOT;SMSUPLEVELPRODUCTS;USESMSPORTS;SMSPORTS;CCMHTTPPORT;SMSSP1COLOCDOWNGRADE;USESMSSSLPORTS;SMSSSLPORTS;SMSSSLSTATE;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSFWKUPGRADEFROMPREV4BETA2;CCMFWKUPGRADEFROMPREV4BETA2;SMSCWS;CCMSHAREMODE
Property(S): AdminProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;CCMSERVERDATAROOT;CCMALLOWSILENTREBOOT;CCMHTTPPORT;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSCWS
Property(S): CcmDefaultPolicyAuthorityPriority = 10
Property(S): SmsDetectColocationDowngrade_ErrorMessage = A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
Property(S): ButtonText_Next = &Next >
Property(S): ButtonText_Back = < &Back
Property(S): ButtonText_Cancel = &Cancel
Property(S): ButtonText_Finish = &Finish
Property(S): ButtonText_Install = &Install
Property(S): ButtonText_Close = &Close
Property(S): ButtonText_OK = &OK
Property(S): ButtonText_Abort = &Abort
Property(S): ButtonText_Ignore = &Ignore
Property(S): ButtonText_No = &No
Property(S): ButtonText_Yes = &Yes
Property(S): ButtonText_Retry = &Retry
Property(S): ButtonText_Exit = &Exit
Property(S): FilesInUse_Info = Setup has detected that it needs to update some files that are currently in use by other processes.
To prevent having to reboot the machine, please close the following applications:
Property(S): DefaultUIFont = DefaultDlgFont
Property(S): DialogBox_Title = SMS Management Point Setup
Property(S): WelcomeDialog_Info = This will install the Systems Management Server Management Point.
Property(S): InstallDialog_Title = Install
Property(S): InstallDialog_SubTitle = The product is now ready to install
Property(S): InstallDialog_Info = Click Next to proceed.
Property(S): ProgressDialog_Title = Please Wait
Property(S): ProgressDialog_SubTitle = Setup is configuring your system.
Property(S): CompleteDialog_Title = Setup Complete
Property(S): CompleteDialog_SubTitle = Setup has finished updating your system.
Property(S): CompleteDialog_Info = Setup was successful.
Property(S): UserExitDialog_Title = Setup Aborted
Property(S): UserExitDialog_SubTitle = Setup was cancelled
Property(S): UserExitDialog_Info = The SMS Management Point setup was cancelled.
Property(S): InstallErrorDialog_Title = Setup Aborted
Property(S): InstallErrorDialog_SubTitle = Setup failed
Property(S): InstallErrorDialog_Info = Setup encountered an error and could not continue.
Property(S): SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\WINDOWS\system32\
Property(S): X64Perf.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\WINDOWS\system32\CCM\X64Perf\
Property(S): CcmDefaultPolicyAuthority = SMS:MP:Default:{B391E30E-C8BD-41FC-8B8C-540C4365DBE0}
Property(S): MPVDirRoot.67022EC1_A401_46E9_91FC_2DF2ED04CF15 = C:\WINDOWS\system32\CCM\SMS_MP\
Property(S): x64.0A840968_9A21_4DA4_A2B3_06C6AEAA2EC9 = C:\WINDOWS\system32\CCM\x64\
Property(S): MPVDirRoot.0A840968_9A21_4DA4_A2B3_06C6AEAA2EC9 = C:\WINDOWS\system32\CCM\SMS_MP\
Property(S): IA64.41483201_CB1F_4581_8423_CA84BCFA8A59 = C:\WINDOWS\system32\CCM\IA64\
Property(S): MPVDirRoot.41483201_CB1F_4581_8423_CA84BCFA8A59 = C:\WINDOWS\system32\CCM\SMS_MP\
Property(S): Res1033.0EACD2EE_412B_4985_9727_96BC217AABD8 = C:\WINDOWS\system32\CCM\1033\
Property(S): Res1033.4CB41E5B_59DE_4D09_98C5_332377961F73 = C:\WINDOWS\system32\CCM\1033\
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): USESMSPORTS = TRUE
Property(S): SMSPORTS = 80
Property(S): USESMSSSLPORTS = TRUE
Property(S): SMSSSLPORTS = 443
Property(S): USESMSSSL = TRUE
Property(S): SMSSSLSTATE = 0
Property(S): CCMENABLELOGGING = TRUE
Property(S): CCMLOGLEVEL = 1
Property(S): CCMLOGMAXSIZE = 1000000
Property(S): CCMLOGMAXHISTORY = 1
Property(S): CURRENTDIRECTORY = D:\sms\bin\i386
Property(S): CLIENTUILEVEL = 3
Property(S): CLIENTPROCESSID = 4972
Property(S): VersionDatabase = 110
Property(S): VersionMsi = 3.01
Property(S): VersionNT = 502
Property(S): WindowsBuild = 3790
Property(S): ServicePackLevel = 2
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\WINDOWS\
Property(S): WindowsVolume = C:\
Property(S): System16Folder = C:\WINDOWS\system\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\WINDOWS\TEMP\
Property(S): ProgramFilesFolder = C:\Program Files\
Property(S): CommonFilesFolder = C:\Program Files\Common Files\
Property(S): AppDataFolder = C:\WINDOWS\system32\config\systemprofile\Application Data\
Property(S): FavoritesFolder = C:\WINDOWS\system32\config\systemprofile\Favorites\
Property(S): NetHoodFolder = C:\WINDOWS\system32\config\systemprofile\NetHood\
Property(S): PersonalFolder = C:\WINDOWS\system32\config\systemprofile\My Documents\
Property(S): PrintHoodFolder = C:\WINDOWS\system32\config\systemprofile\PrintHood\
Property(S): RecentFolder = C:\WINDOWS\system32\config\systemprofile\Recent\
Property(S): SendToFolder = C:\WINDOWS\system32\config\systemprofile\SendTo\
Property(S): TemplateFolder = C:\Documents and Settings\All Users\Templates\
Property(S): CommonAppDataFolder = C:\Documents and Settings\All Users\Application Data\
Property(S): LocalAppDataFolder = C:\WINDOWS\system32\config\systemprofile\Local Settings\Application Data\
Property(S): MyPicturesFolder = C:\WINDOWS\system32\config\systemprofile\My Documents\My Pictures\
Property(S): AdminToolsFolder = C:\Documents and Settings\All Users\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\Documents and Settings\All Users\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\Documents and Settings\All Users\Start Menu\Programs\
Property(S): StartMenuFolder = C:\Documents and Settings\All Users\Start Menu\
Property(S): DesktopFolder = C:\Documents and Settings\All Users\Desktop\
Property(S): FontsFolder = C:\WINDOWS\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): Intel = 15
Property(S): PhysicalMemory = 4095
Property(S): VirtualMemory = 5202
Property(S): AdminUser = 1
Property(S): LogonUser = SYSTEM
Property(S): UserSID = S-1-5-18
Property(S): UserLanguageID = 1033
Property(S): ComputerName = CCAZ341
Property(S): SystemLanguageID = 6153
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 19
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 15:42:16
Property(S): Date = 4/9/2014
Property(S): MsiNetAssemblySupport = 2.0.50727.42
Property(S): MsiWin32AssemblySupport = 5.2.3790.3959
Property(S): RedirectedDllSupport = 2
Property(S): Privileged = 1
Property(S): USERNAME = TGAdmin
Property(S): COMPANYNAME = Teagasc
Property(S): DATABASE = C:\WINDOWS\Installer\15b9a.msi
Property(S): OriginalDatabase = d:\sms\bin\i386\mp.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
Property(S): SMSCWSADSPATH = IIS://LocalHost/W3SVC/1
Property(S): CCMSHAREMODE = 1
Property(S): IISAnonymousUserAccount = IUSR_CCAZ341
Property(S): ROOTDRIVE = E:\
Property(S): CostingComplete = 1
Property(S): OutOfDiskSpace = 0
Property(S): OutOfNoRbDiskSpace = 0
Property(S): PrimaryVolumeSpaceAvailable = 21613138
Property(S): PrimaryVolumeSpaceRequired = 29783
Property(S): PrimaryVolumeSpaceRemaining = 21583355
Property(S): INSTALLLEVEL = 1
Property(S): CcmAdministratorsGroupName = Administrators
Property(S): CcmUsersGroupName = Users
Property(S): CcmCreatorOwnerAccountName = CREATOR OWNER
Property(S): PrimaryVolumePath = C:
Property(S): SOURCEDIR = d:\sms\bin\i386\
Property(S): SourcedirProduct = {B391E30E-C8BD-41FC-8B8C-540C4365DBE0}
Property(S): CCMHTTPSPORT = 443
Property(S): CCMHTTPSSTATE = 0
Property(S): CCMHTTPPORT = 80
Property(S): ProductToBeRegistered = 1
MSI (s) (44:D4) [15:42:16:906]: Note: 1: 1708
MSI (s) (44:D4) [15:42:16:906]: Product: SMS Management Point -- Installation operation failed.
MSI (s) (44:D4) [15:42:16:906]: Cleaning up uninstalled install packages, if any exist
MSI (s) (44:D4) [15:42:16:906]: MainEngineThread is returning 1603
MSI (s) (44:C0) [15:42:17:015]: Destroying RemoteAPI object.
MSI (s) (44:F8) [15:42:17:015]: Custom Action Manager thread ending.
=== Logging stopped: 4/9/2014 15:42:16 ===
MSI (c) (6C:F0) [15:42:17:015]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (6C:F0) [15:42:17:031]: MainEngineThread is returning 1603
=== Verbose logging stopped: 4/9/2014 15:42:17 ===
Maybe you are looking for
-
How do I undo BC Partition repair in disk utility?
Here's the summary: 8-core MacPro2,1 running 10.6.8, Paragon NTFS for Mac, Bootcamp Win7. 4 internal HDD drives: two 1.5TBs for data, one 1TB for MacOS, one 1.5TB for Win7 bootcamp. I mostly use the Mac side for music production (but rarely), and the
-
I would like to add another laptop to my authorized devices in iTunes store. But it says I have 5 devices already. 4 of these devices are actually iphones, ipads or itouch. I am afraid to deauthorize them so I can add a laptop. It will take the m
-
JSpell socket error, access denied
I'm working to get JSpell up and running using the demo form and the 2004 version of JSpell. After going through the Options dialog in the demo when the form loads. I click OK and then click spell check. I get the following error in forms but not in
-
Dear Fellow Java Developers: I need to upload files from my pc using JSP and was told that using the FileUpload utility from the Jakarta Commons package is the way to go. What I would like to know is if someone has some sample code that demonstrates
-
Hi All. We have setup the IC WebClient Agent Inbox through the WS14000164 workflow, and we can see the email in the IC Inbox. However, when we click in the link in the column 'Main Category', the following error is shown: "Cannot process INBOX email;