Createprocess failed for AppletViewer Windows NT error #193

Hi all,
I am evaluating jdev 2.0 and I have created a workspace and
project on one machine which has a wizard generated master-
detail applet. I can log on to the DB and browse records
successfully in run mode.
When I copy this directory and all associated files to a second
machine and attempt to run it, I get the following error:
createprocess failed for AppletViewer Windows NT error #193
I then created a new workspace/project as above and I still get
this error message.
HELP! TIA Paul Valdetaro
null

This is not the problem - I am the administrator on both
machines. I have tried the suggested solution in any event, and
there is no change. I have tried reinstalling your product and
this produces the same result. The weird thing thing is that
the infobus data wizard works fine in design mode but the applet
bombs in run mode.
JDeveloper Team (guest) wrote:
: Hi
: Looks like some config problem with NT. You may have to check
: what WindowNT error #193 means with your sysadmin or so
: for ex:-
: createprocess failed for appletviewer, Windows NT error #5
: is ERROR_ACCESS_DENIED
: For the above example eroor look at who ownership and
protection
: of the exe(s) and dlls in your installation of jdeveloper.
: One suggestion for the above example problem is to select the
: JDEV home directory and change the permission of all files &
sub
: directories to "full control for Everyone".
: regards
: Paul Valdetaro (guest) wrote:
: : Hi all,
: : I am evaluating jdev 2.0 and I have created a workspace and
: : project on one machine which has a wizard generated master-
: : detail applet. I can log on to the DB and browse records
: : successfully in run mode.
: : When I copy this directory and all associated files to a
second
: : machine and attempt to run it, I get the following error:
: : createprocess failed for AppletViewer Windows NT error
: #193
: : I then created a new workspace/project as above and I still
get
: : this error message.
: : HELP! TIA Paul Valdetaro
null

Similar Messages

Pse9 fails to install, windows installer error

I have just completed a clean re-install of Windows XP SP3 (plus subsequent updates). Trying to re--install PSE9 from the original disk fails with a Windows Installer error.
I have successfully re-installed all other software including, Norton IS 2012, Office 2007 sp3, Sage 50, HP printers x 2, adobe acrobat X, etc
All drivers were downloaded from the mobo's/HP website. Looked at min specs, but as pse9 installed fine on same machine prior to the re-install, don't think that can be the issue.
I tried installing on another XP SP3 PC which is not a clean re-install and it didn't show the error.
So auggestions?

When we tried subsequently, PSE9 installed as it should, we can only assume that pse9 wouldn't install initially due to HP laser printer drivers that had been installed that required a reboot, although at the time we weren't aware of that.
Thanks for your help guys......

Operation Unprepare failed for application 'createObject'. Error - weblogic

I am getting this exception when i undeploy my application in JDev 11.1.1.3.0
has anyone else encountered similer problem ?
<Aug 18, 2010 3:53:16 PM IST> <Warning> <Deployer> <BEA-149251> <Operation Unprepare failed for application 'createObject'. Error - weblogic.utils.ErrorCollectionException:
There are 1 nested errors:
java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
     at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1483)
     at oracle.adf.share.config.ADFConfigImpl.releaseResources(ADFConfigImpl.java:674)
     at oracle.adf.share.config.ADFConfigFactory.cleanUpApplicationState(ADFConfigFactory.java:432)
     at oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener.postStop(ADFApplicationLifecycleListener.java:96)
     at weblogic.application.internal.flow.BaseLifecycleFlow$PostStopAction.run(BaseLifecycleFlow.java:351)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
     at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
     at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
     at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1233)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:159)
     at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:495)
     at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:205)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.silentUnprepare(AbstractOperation.java:689)
     at weblogic.deploy.internal.targetserver.operations.RemoveOperation.removeDeployment(RemoveOperation.java:313)
     at weblogic.deploy.internal.targetserver.operations.RemoveOperation.doCommit(RemoveOperation.java:114)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1449)
     ... 30 more
Caused by: java.lang.NullPointerException
     at oracle.adf.share.http.ServletADFContext.initialize(ServletADFContext.java:423)
     at oracle.adf.share.http.ServletADFContext.initThreadContext(ServletADFContext.java:351)
     at oracle.adf.share.http.ServletADFContext.initThreadContextIfNeeded(ServletADFContext.java:284)
     ... 35 more
weblogic.utils.ErrorCollectionException:
There are 1 nested errors:
java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
     at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1483)
     at oracle.adf.share.config.ADFConfigImpl.releaseResources(ADFConfigImpl.java:674)
     at oracle.adf.share.config.ADFConfigFactory.cleanUpApplicationState(ADFConfigFactory.java:432)
     at oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener.postStop(ADFApplicationLifecycleListener.java:96)
     at weblogic.application.internal.flow.BaseLifecycleFlow$PostStopAction.run(BaseLifecycleFlow.java:351)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
     at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
     at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
     at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1233)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:159)
     at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:495)
     at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:205)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.silentUnprepare(AbstractOperation.java:689)
     at weblogic.deploy.internal.targetserver.operations.RemoveOperation.removeDeployment(RemoveOperation.java:313)
     at weblogic.deploy.internal.targetserver.operations.RemoveOperation.doCommit(RemoveOperation.java:114)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1449)
     ... 30 more
Caused by: java.lang.NullPointerException
     at oracle.adf.share.http.ServletADFContext.initialize(ServletADFContext.java:423)
     at oracle.adf.share.http.ServletADFContext.initThreadContext(ServletADFContext.java:351)
     at oracle.adf.share.http.ServletADFContext.initThreadContextIfNeeded(ServletADFContext.java:284)
     ... 35 more
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:207)
     at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
     at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
     at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1233)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
     Truncated. see log file for complete stacktrace
Caused By: weblogic.utils.ErrorCollectionException:
There are 1 nested errors:
java.lang.RuntimeException: java.lang.reflect.InvocationTargetException
     at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1483)
     at oracle.adf.share.config.ADFConfigImpl.releaseResources(ADFConfigImpl.java:674)
     at oracle.adf.share.config.ADFConfigFactory.cleanUpApplicationState(ADFConfigFactory.java:432)
     at oracle.adf.share.weblogic.listeners.ADFApplicationLifecycleListener.postStop(ADFApplicationLifecycleListener.java:96)
     at weblogic.application.internal.flow.BaseLifecycleFlow$PostStopAction.run(BaseLifecycleFlow.java:351)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
     at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
     at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
     at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1233)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:159)
     at weblogic.application.internal.BaseDeployment.unprepare(BaseDeployment.java:495)
     at weblogic.application.internal.EarDeployment.unprepare(EarDeployment.java:58)
     at weblogic.application.internal.DeploymentStateChecker.unprepare(DeploymentStateChecker.java:205)
     at weblogic.deploy.internal.targetserver.AppContainerInvoker.unprepare(AppContainerInvoker.java:117)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.silentUnprepare(AbstractOperation.java:689)
     at weblogic.deploy.internal.targetserver.operations.RemoveOperation.removeDeployment(RemoveOperation.java:313)
     at weblogic.deploy.internal.targetserver.operations.RemoveOperation.doCommit(RemoveOperation.java:114)
     at weblogic.deploy.internal.targetserver.operations.AbstractOperation.commit(AbstractOperation.java:323)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentCommit(DeploymentManager.java:844)
     at weblogic.deploy.internal.targetserver.DeploymentManager.activateDeploymentList(DeploymentManager.java:1253)
     at weblogic.deploy.internal.targetserver.DeploymentManager.handleCommit(DeploymentManager.java:440)
     at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.commit(DeploymentServiceDispatcher.java:163)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doCommitCallback(DeploymentReceiverCallbackDeliverer.java:195)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$100(DeploymentReceiverCallbackDeliverer.java:13)
     at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$2.run(DeploymentReceiverCallbackDeliverer.java:68)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at oracle.adf.share.ADFContext.initADFContext(ADFContext.java:1449)
     ... 30 more
Caused by: java.lang.NullPointerException
     at oracle.adf.share.http.ServletADFContext.initialize(ServletADFContext.java:423)
     at oracle.adf.share.http.ServletADFContext.initThreadContext(ServletADFContext.java:351)
     at oracle.adf.share.http.ServletADFContext.initThreadContextIfNeeded(ServletADFContext.java:284)
     ... 35 more
     at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:207)
     at weblogic.application.internal.flow.BaseLifecycleFlow.postStop(BaseLifecycleFlow.java:95)
     at weblogic.application.internal.flow.HeadLifecycleFlow.unprepare(HeadLifecycleFlow.java:290)
     at weblogic.application.internal.BaseDeployment$1.previous(BaseDeployment.java:1233)
     at weblogic.application.utils.StateMachineDriver.previousState(StateMachineDriver.java:167)
     Truncated. see log file for complete stacktrace

Hi,
Are you still getting this error, or have you solved it? I'm noticing the same exception myself.
Barry.

SMB Remount Failed for url (serverpath) with error =17

I keep getting the following messages in the system log. Does anyone know what the error 17 is?
7/15/14 7:30:39.000 AM kernel[0]   smbfs_down: Remounting fs01/USERS$
7/15/14 7:30:39.000 AM kernel[0]   smbfs_down: Remounting fs01/DEPTS
7/15/14 7:30:39.000 AM kernel[0]   smb_iod_reconnect: Reconnected share USERS$ with server fs01
7/15/14 7:30:39.000 AM kernel[0]   smb_iod_reconnect: Reconnected share DEPTS with server pmfs01p
7/15/14 7:30:53.650 AM smbremountserver[1913] SysctlRemountFS: failed for 0x2d000004:0x15 - File exists
7/15/14 7:30:53.650 AM smbremountserver[1913] smb_remount_with_fsid: remount failed for url //(userID)@fs01/dat/users with error = 17
7/15/14 7:30:58.166 AM smbremountserver[1912] SysctlRemountFS: failed for 0x2d000003:0x15 - File exists
7/15/14 7:30:58.166 AM smbremountserver[1912] smb_remount_with_fsid: remount failed for url //(userID)@fs01/dat/DEPTS with error = 17

Please add the fully qualified domain name (FQDN) & Ip address of your server to the hosts file.This would solve your problem.

Update failed for Acrobat X Pro - Error 1321

I'm unable to update and receiving the error message:
Error 1321. The Installer has insurfficient priveleges to modifiy the file C:\Program Files (x86)\Adobe\Acro install files\program files\Adobe\Acrobat 10.0\Resource\Font\CourierStd-Bold.otf
Can anyone help with this.
tx
Bill

This worked for me.
1) Uninstall adobe acrobat pro x
2.) Restart
3.) Rename c:\program files\adobe\acrobat 10.0 c:\program files\adobe\oldactobat 10.0
4.) reinstall adobe acrobat pro x and update.

"Synchronization with your WinRT failed for 1 items." error from exchange server

My client uses exchange 2007/2010 servers. In case of a 2007 exchange server, I get an email when I setup my client to synchronize
with the server:
Microsoft Exchange was unable to send the following items to your mobile device. These items have not been deleted. You should be able to access them using either Outlook or Outlook Web Access.
Item Folder:
Contacts
Item Type:
IPM.Contact
Item Created:
12/5/2014 6:20:07 AM
Item Subject:
Test Test
This error comes for all the contacts present for the user on the exchange server.
I traced all the commands and responses in fiddler and there is no sync error for any of the sync/ping commands. Any idea what might
cause this error?

Hi Ashish,
Kindly refer to the below KB, might help
http://support.microsoft.com/kb/2563324
It speaks about Update Rollup 4 for Exchange Server 2007 Service Pack 3.
Kindly check and share your inputs, if this worked for you.
Thanks & Regards
John Chris

Validation failed for C:\WINDOWS\system32\VSINT.dll. You probable are missing a necessary root certificate

when right clicking mouse on folder or icon

Probably it is a Zone Alarm error. Do you have it? Deactivate it and try again.
thank you

Application download stuck at 99 percent - createFilew failed for ...

Hello,
we have a problem with our System Center 2012 Configuration Manager environment. For many applications on many systems the downloading process endless stuck at 99 percent. When we check the ContentTransferManager.log it says "successfully processed download
completion". But the CAS.log e.g. says:
<![LOG[CreateFileW failed for c:\windows\ccmcache\2l\access.ww\accessww.msi]LOG]!><time="16:07:06.423-60" date="11-23-2012" component="ContentAccess" context="" type="3" thread="4292" file="newhashdir.cpp:162">
<![LOG[楆敬灏湥 failed; 0x80070020]LOG]!><time="16:07:06.423-60" date="11-23-2012" component="ContentAccess" context="" type="3" thread="4292" file="newhashdir.cpp:166">
<![LOG[慈桳潃瑮湥t failed; 0x80070020]LOG]!><time="16:07:06.423-60" date="11-23-2012" component="ContentAccess" context="" type="3" thread="4292" file="newhashdir.cpp:727">
<![LOG[慈桳潃瑮湥t failed; 0x80070020]LOG]!><time="16:07:06.423-60" date="11-23-2012" component="ContentAccess" context="" type="3" thread="4292" file="newhashdir.cpp:727">
<![LOG[潃灭瑵䍥湯整瑮慈桳 failed; 0x80070020]LOG]!><time="16:07:06.423-60" date="11-23-2012" component="ContentAccess" context="" type="3" thread="4292" file="newhashdir.cpp:821">
Does anybody have an idea what's the cause or where to find more information? Content validation is activated on the DPs and seems to be okay
Thanks,
Bernd

Hi,
The error 0x80070020 translates to: "The process cannot access the file because it is being used by another process"
I would check the anti-virus exclusions to make sure they don't interfere in any way.
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Reports successfully execute but generate a login failed for user 'sa' err

I am running Crystal Reports Server XI R2. Classic ASP is used to generate embedded reports within our application. The crystal reports use ODBC to connect to a SQL Server 2005 database. The reports successfully generate in our Classic ASP application. However in SQL Server 2005, the following error messages are being generated each time a crystal report is ran:
- Login failed for user 'sa'.
- Error: 18456, Severity: 14, State: 8.
We know that we are passing the correct username/password to the crystal reports, becuase they execute successfully.
It appears that when the report is called, Crystal Reports appears to conect to SQL Server using a username/password that we didn't provide it at execution time, this fails and the SQL Server 'login failed for user' is generated. Then it runs the report using the username/password we provide and it successfully generates a report.
I have ran Profiler against the SQL Server Database and the 'Login failed for user 'sa' ' errors have a ApplicationName of either 'Seagate Crystal Reports' or 'Crystal Reports'. Therefore I know it is Crystal Reports generating these errors in SQL Server.
Does anyone have any ideas on how to stop these SQL Server 'Login failed for user 'sa' ' errors being generated?

What happens if you use Profiler when running the report using Crystal Report Designer?
If the report is ran through Crystal Report Designer, NO 'Login failed for user' error messages appear in profiler. Everything looks ok when ran in Designer.
Also, need to know what patch level you are on?
We are running Crystal Reports Server XI Release 2, Version: 11.5.8.8265
No additional patchs have been applied since Crystal Reports Server was installed.
We may try the SA account if one of the connections fail to log on with the credentials you provided. Verify the user you logged on with has rights to all tables.
The reports were running through our application using the SA account. The SA account has permissions to these tables. The reports do generate results and appear perfectly fine in the application. The issue is that when our application requests the report from Crystal Reports Server. Crystal Reports Server delivers the correct report to our application. However during the process to generate the report, 'login failed for user 'sa' ' errors are being generated in SQL Server 2005.
Also, I have tried creating a completely new SQL user called 'crystaluser'. I ran the report using Crystal Report Designer and used the crystaluser logon and saved the report. Then I ran the same report through our application. SQL Profiler will then display 'login failed for user 'crystaluser''.
Its seems as though Crystal Reports Server is first executing the report using the default SQL user saved with the report, but is either sending a blank password or no password at all. This generates the 'login failed for user' in SQL Server 2005. But it then uses the SQL username/password my application gives it and successfully generates the report. Of course this is only speculation.

Result: User equivalence check failed for user "oracle".

While installing on Solaris-10, ssh, rlogin, scp works fine.
Running runcluvfy.sh stage -post hwos -n rac-1,rac-2 -verbose returns the above error.
Result: User equivalence check failed for user "oracle".
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
/bin/ssh & /bin/scp is in use.

Hello,
I am facing User equivalence check failed for user "oracle" error on my newly to be built RAC cluster.
The Oracle users have been created identically and ssh have been setup as per RAC installation manual.
Still I am facing the below problem. Please help me out
Node1 > uname -a
Linux purple-rac-node2 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
Node2 > uname -a
Linux purple-rac-node1 2.6.18-194.el5 #1 SMP Mon Mar 29 22:10:29 EDT 2010 x86_64 x86_64 x86_64 GNU/Linux
clusterware/cluvfy/runcluvfy.sh stage -post hwos -n purple-rac-node1,purple-rac-node2 -verbose
Performing post-checks for hardware and operating system setup
Checking node reachability...
Check: Node reachability from node "purple-rac-node1"
Destination Node                      Reachable?
purple-rac-node2                         yes
purple-rac-node1                         yes
Result: Node reachability check passed from node "purple-rac-node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name                             Comment
purple-rac-node2                         failed
purple-rac-node1                         failed
Result: User equivalence check failed for user "oracle".
ERROR:
User equivalence unavailable on all the nodes.
Verification cannot proceed.
[oracle@purple-rac-node1 ~]$ id oracle
uid=501(oracle) gid=501(dba) groups=501(dba),502(oper),503(oinstall)
[oracle@purple-rac-node2 ~]$ id oracle
uid=501(oracle) gid=501(dba) groups=501(dba),502(oper),503(oinstall)

Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. and 'iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 193)

Hi!
So i think i closed the wrong service at some point a few weeks back (apple mobile device) but iTunes remained working after that for another week. I then updated iTunes and i get the same "Service ‘Apple Mobile Device’ (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." every time. If i click ignore, just so i can access iTunes with out syncing my iPod (touch 2nd gen) i then get 'iTunes was not installed correctly. Please re-install iTunes. Error 7 (Windows error 193)" when it has all installed. I don't understand what the problem is anymore as I have looked at other questions on the apple website, carried out the advice and it hasn't work. Any of them.
Tings I have done:
- Wiped all iTunes and Apple data from my computer (if you search for 'iTunes' or 'Apple' nothing comes up apart from applets from system code.
- Attached iPod before iTunes install and updated drivers.
- Installed iTunes as 'Run as administrator'
- Uninstalled and re-installed the software nearly 20 times now and rebooted the computer in between everytime.
Please someone help because i really need to get music on my ipod and i enjoy the ease of use of iTunes compared to spotify or Windows Media Player.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
Regarding AMDS failures there is a hint in another thread that disabling the Windows Firewall before attempting to reinstall may help, otherwise take a look at the steps outlined in this post. Re: Can't install iTunes 12.1 on Windows 7 64-bit. I know they look a little daunting, but the process of generating the logs themselves isn't that hard to do. Extracting useful information from them is still a challenge but maybe something will leap out. If you want to post the log for the failed components for me to have a look at here or in the other thread please edit out any personal information, particularly your email address, first.
tt2

Apple Mobile Device Service failed to start which eventually leads to windows error 193 which never goes away no matter what I do and the dreaded

Mid way through download of I-Tunes after clearing every Apple program from my computer I get "Apple Mobile Device Service" failed to start message. Eventually leading to Windows error 193 (error 7). How do I get Apple Mobile Device Service to start so I do not get error messages and failure of I-Tunes to install?

If you have a 64-bit machine, then try the "for older video cards" version...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Help!!! iTunes install error "Apple Mobile Device Service Failed To Start". Error 7 (Windows Error 193)

Help! Following a standard upgrade I got the error message "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 193).
I am running Windows 7 and installing again brings the message "Apple Mobile Device Service failed to start. Verify that you have sufficient privileges to start system services"
I have uninstalled everything Apple, deleted all related folders and run as administrator numerous times with no luck.
I had hoped that iTunes 12.1.2 would resolve the issue, unfortunately it failed to do so leaving me iTunes free which is driving me mad!
Can anyone advise what else I can do to resolve the error and bring back iTunes?
Thanks

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What to do?

I have uninstalled and reinstalled iTunes Version 11.4.1 and still cannot access. I continue to get the Error 7 Windows Error 193 and now I am getting the Apple Mobile Device failed to start. I can't access any of my music I HAVE PURCHASED. What to do?

I am getting the same error message - error 7, Windows error 193 running iTunes on a PC Laptop (HP) which has been running iTunes previously for at least 2 years.
I followed the Apple support page and uninstalled (in order) all Apple programmes specified, rebooted, then re-installed. Two additional errors crop up in re-installation, the first one is to do with Apple Mobile Support Device Services. It seems that this might be rectified by plugging in said devices before finishing the re-install. The second reads iTunesHelper was not installed correctly please re-install iTunes. This persists. I cannot uninstall iTunesHelper using the Control Panel, but I can delete it using Windows. However, after re-installing again, it still won't run and the original error comes back. I've downloaded and uninstalled 15 times now and this is taking far too long to be acceptable.

Cannot connect to SERVER. Login failed for user 'DOMAIN\user'. (Microsoft SQL Server, Error 18456) - SQL Server 2012 on Windows Server 2008 R2

I've seen multiple blogs and forums with similar problems and SQL 2012 or 2008. But no solutions that work for me.
I have installed SQL Server in mixed mode (SQL and Windows authentication). I can create new Login accounts in either mode. However, I cannot get an AD security group Login account to work. I am trying to add group 'DOMAIN\Domain Admins' or 'SERVER\Administrators'
as a Login so that any of the domain's administrator accounts can open SQL Server Management Studio and act as an 'sa' account on this server.
I have deleted the SQL account 'DOMAIN\Domain Admins'.
I have restarted SQL.
I have restarted the Win2K8r2 server.
I have launched SSMS as Administrator from the desktop of SERVER.
I have launched SSMS as another user (and used 'DOMAIN\user' to lauch it) from the desktop of SERVER.
I can create a login account named 'DOMAIN\user' (who happens to be a member of the 'DOMAIN\Domain Admins' group) and give this account 'sa' security, and when I do that, this account works as expected...
How do I add a security group as a Login account and give all members of that group the ability to be an 'sa' account?

Hi geoperkins,
Are you getting the following error message?
Error: 18456, Severity: 14, State: 11
Login failed for user <Domain\user>. Reason: Token-based server access validation failed with an infrastructure error.
If that is the case, the issue could be due to that the Windows login has no profile or that permissions could not be checked due to UAC. Please disable UAC firstly and check if it is successful to log in SQL Server.
Another reason could be that the domain controller could not be reached. You may need to resort to re-creating the login. Create a new group in AD, add users to the new group, then add the group to the local admin group and create login for the group in SQL
Server.
There is a connect item describing similar issue for your reference.
https://connect.microsoft.com/SQLServer/feedback/details/680705/cant-login-to-sql-using-windows-authentication-when-user-is-in-a-domain-security-group
For more details about above error, please review the following blog.
http://sqlblogcasts.com/blogs/simons/archive/2011/02/01/solution-login-failed-for-user-x-reason-token-based-server-access-validation-failed-and-error-18456.aspx
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Createprocess failed for AppletViewer Windows NT error #193

Similar Messages

Maybe you are looking for