SMB Share with Access Based Enumeration & Mac OSX 10.8/10.9

Hello,
I've been working on a bit of a problem related to some SMB Shares on Windows Server 2012 with Access Based Enumeration with Mac OSX 10.8 & 10.9.
Basically, we have one network share that mounts for all of our Students & Faculty on campus. Then, based on which security group the user is inside of in Active Directory, they gain access and visibility to different folders. (Basically, if they are members of the graphic design department, they get access to the Graphic Design's folder). All of that is working fine, no problems. From there we have 3 folders that branch off. We have a Distribution, an Open, and a Dropbox folder.
Distribution is setup as a spot for instructors to have full access, students have read access, They're able to drop files into this locations, to distribute them to their students. This folder is working fine, no problems.
Open is setup with everyone read/write access across the board. This folder is setup for students to share data to each other, work on projects, etc. This folder is working as intended, no problems.
Dropbox is the only folder we're having trouble with, i'm assuming because it's settings are the most complex out of the three. The purpose of the drop box is for students to have read/write control over their own content, but not others, and instructors to have read/write over this entire folder.
Now that I've laid out our Setup, the problem we've encountered, is ONLY occurring inside of the Dropbox folder. When I try to Drag/Drop OR Copy/Paste from another location on the computer into the Dropbox folder, I get a permission error. HOWEVER, if I have a file open, and I click "save as" browse to the dropbox folder, I can save the file into that location without any trouble. Also, on our windows computers, with the same exact users, drag/drop & Copy/Paste work normally.
Things I've Tried:
Disabling the .DS_Store - I figured in the drop box, the .DS_Store would be created by the first user who copied a file in, then subsequent users would not have access to the .DS_Store.
CIFS/SMB1 - I've read that SMB2 can cause some trouble while connecting to SMB Shares, so I tried both connecting via CIFS, and also by forcing back to SMB1, with no fix.
Am I missing something with this? I've read a lot about people having trouble connecting to SMB Shares, but for us it had not been a problem up until this point. Does anyone know what a possible fix might be for this? I'm sifting through internet searches right now, trying to find a solution, however MOST of the responses I see are regarding the two things I've already tried.
Any suggestions would be greatly appreciated.
Thanks!

hi everybody
I really need some help so here is a little up !
thanks !

Similar Messages

OSX 10.8 and SMB Shares with Access Based Enumeration.

Hello,
I've been working on a bit of a problem related to some SMB Shares on Windows Server 2012 with Access Based Enumeration with Mac OSX 10.8 & 10.9.
Basically, we have one network share that mounts for all of our Students & Faculty on campus. Then, based on which security group the user is inside of in Active Directory, they gain access and visibility to different folders. (Basically, if they are members of the graphic design department, they get access to the Graphic Design's folder). All of that is working fine, no problems. From there we have 3 folders that branch off. We have a Distribution, an Open, and a Dropbox folder.
Distribution is setup as a spot for instructors to have full access, students have read access, They're able to drop files into this locations, to distribute them to their students. This folder is working fine, no problems.
Open is setup with everyone read/write access across the board. This folder is setup for students to share data to each other, work on projects, etc. This folder is working as intended, no problems.
Dropbox is the only folder we're having trouble with, i'm assuming because it's settings are the most complex out of the three. The purpose of the drop box is for students to have read/write control over their own content, but not others, and instructors to have read/write over this entire folder.
Now that I've laid out our Setup, the problem we've encountered, is ONLY occurring inside of the Dropbox folder. When I try to Drag/Drop OR Copy/Paste from another location on the computer into the Dropbox folder, I get a permission error. HOWEVER, if I have a file open, and I click "save as" browse to the dropbox folder, I can save the file into that location without any trouble. Also, on our windows computers, with the same exact users, drag/drop & Copy/Paste work normally.
Things I've Tried:
Disabling the .DS_Store - I figured in the drop box, the .DS_Store would be created by the first user who copied a file in, then subsequent users would not have access to the .DS_Store.
CIFS/SMB1 - I've read that SMB2 can cause some trouble while connecting to SMB Shares, so I tried both connecting via CIFS, and also by forcing back to SMB1, with no fix.
Am I missing something with this? I've read a lot about people having trouble connecting to SMB Shares, but for us it had not been a problem up until this point. Does anyone know what a possible fix might be for this? I'm sifting through internet searches right now, trying to find a solution, however MOST of the responses I see are regarding the two things I've already tried.
Any suggestions would be greatly appreciated.
Thanks!
iMac, OS X Mountain Lion (10.8.5)

Just thought I'd post this in case it helps someone. This could be the same problem we have (had) here so try this:
When it asks for name and password put this in the name field: sharename\name
So if the share is called "WWW" and your login name is "Bob" you'd put "www\Bob" in the name field and then normal password in the password field.
Works perfectly for us. I cant remember when it started 10.7 or 10.8 but this was the only solution. Hope it helps someone else!

Problem with access based enumeration

Hello.
We still have about 500 Windows XP SP3 computers in our organization. We have Windows 2008 R2 file cluster with ABE-enabled shares. When we try to access shares from XP computers we have symptoms as described in KB941598 ("Path not found" when
user has no permissions on the upper folders and he uses dialog window or explorer address bar but not "Run" command from Start menu):
https://support.microsoft.com/en-us/kb/941598. We have no this problem on Windows 7 after KB2821343 installing in 2013.
We can't install KB941598 hotfix because SP3 already installed. Shell32.dll version is 6.00.2900.6242, XPSP3res.dll version is 5.1.2600.5512.

Hi,
Do you try to install the KB941598 hotfix? It seems that the hotfix is included in Windows XP Service Pack 3. Please see:
List of fixes that are included in Windows XP Service Pack 3
https://support.microsoft.com/en-us/kb/946480
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Powershell: Set Access Based Enumeration on share in Failover Cluster

Hi guys,
I'm facing the following problem. Below you see my script to create a shared folder. (My folder share is visible in failover cluster manager, underneath clustergroup TESTSTO01.)
Now I need to enable Access Based Enumeration on this share. Has anyone a clue how to do that in powershell? (Version 2).
I also need to make sure that the files and programs are not available offline.
Thanks in advance!
$SHARE_READ = 1179817 # 100100000000010101001
$SHARE_CHANGE = 1245631 # 100110000000100010110
$SHARE_FULL = 2032127 # 111110000000111111111
$SHARE_NONE = 1 # 000000000000000000001
$ACETYPE_ACCESS_ALLOWED = 0
$ACETYPE_ACCESS_DENIED = 1
$ACETYPE_SYSTEM_AUDIT = 2
$ACEFLAG_INHERIT_ACE = 2
$ACEFLAG_NO_PROPAGATE_INHERIT_ACE = 4
$ACEFLAG_INHERIT_ONLY_ACE = 8
$ACEFLAG_INHERITED_ACE = 16
$ACEFLAG_VALID_INHERIT_FLAGS = 31
$ACEFLAG_SUCCESSFUL_ACCESS = 64
$ACEFLAG_FAILED_ACCESS = 128
# New Trustee
function New-Trustee($Domain, $User)
$Trustee = ([WMIClass]"\\TESTSTO01\root\cimv2:Win32_Trustee").CreateInstance()
   $Trustee.Domain = $Domain
   $Trustee.Name = $User
   if ($User -eq "Administrators")
{$Trustee.SID = @(1, 2, 0, 0, 0, 0, 0, 5, 32, 0, 0, 0,32,2,0,0)}
else
{$Trustee.SID = @(1, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 0)}
   return $Trustee
# New ACE
function New-ACE($Domain, $User, $Access, $Type, $Flags)
$ACE = ([WMIClass]"\\TESTSTO01\root\cimv2:Win32_ACE").CreateInstance()
   $ACE.AccessMask = $Access
   $ACE.AceFlags = $Flags
   $ACE.AceType = $Type
   $ACE.Trustee = New-Trustee $Domain $User
   return $ACE
# Get SD
function Get-SD
$sd = ([WMIClass]"\\TESTSTO01\root\cimv2:Win32_SecurityDescriptor").CreateInstance()
$ACE1 = New-ACE -Domain $null -User "Everyone" -Access $SHARE_CHANGE -Type $ACETYPE_ACCESS_ALLOWED -Flags $ACEFLAG_INHERIT_ACE
$ACE2 = New-ACE -Domain $null -User "Administrators" -Access $SHARE_FULL -Type $ACETYPE_ACCESS_ALLOWED -Flags $ACEFLAG_INHERIT_ACE
[System.Management.ManagementObject[]] $DACL = $ACE1, $ACE2
$sd.DACL =$DACL
return $sd
# Create-Share
function Create-Share($ShareName, $Path, $Comment,$Access)
   $checkShare = (Get-WmiObject Win32_Share -Filter "Name='$ShareName'")
   if ($checkShare -ne $null) {
   # "Share exists and will now be deteted!!!"
   get-WmiObject Win32_Share -Filter "Name='$ShareName'" | foreach-object { $_.Delete() }
   $wmishare = [WMIClass] "\\TESTSTO01\ROOT\CIMV2:Win32_Share"
$Access = Get-SD
   $R = $wmishare.Create($Path,$Sharename,0,$null,$Comment,"", $Access)
   if ($R.ReturnValue -ne 0) {
   Write-Error "Error while creating share: " + $R.ReturnValue
   exit
   # Write-Host "Share has been created."
# Create first share with permissons **********************************
$ShareName = "$Company$"
$Path = "$Driveletter" + ":\$Company"
$Comment = ""
$Domain = $Null
Create-Share $ShareName $Path $Comment $Access

Unable to find type [CmdletBinding(SupportsShouldProcess=$TRUE)]: make sure tha
t the assembly containing this type is loaded.
At C:\Script Nathalie\Everyware2.ps1:294 char:45
+ [CmdletBinding(SupportsShouldProcess=$TRUE)] <<<<
   + CategoryInfo : InvalidOperation: (CmdletBinding(S...dProcess=$T
   RUE):String) [], RuntimeException
   + FullyQualifiedErrorId : TypeNotFound
The term 'param' is not recognized as the name of a cmdlet, function, script fi
le, or operable program. Check the spelling of the name, or if a path was inclu
ded, verify that the path is correct and try again.
At C:\Script Nathalie\Everyware2.ps1:295 char:6
+ param <<<< (
   + CategoryInfo : ObjectNotFound: (param:String) [], CommandNotFou
   ndException
   + FullyQualifiedErrorId : CommandNotFoundException
The term 'begin' is not recognized as the name of a cmdlet, function, script fi
le, or operable program. Check the spelling of the name, or if a path was inclu
ded, verify that the path is correct and try again.
At C:\Script Nathalie\Everyware2.ps1:304 char:6
+ begin <<<< {
   + CategoryInfo : ObjectNotFound: (begin:String) [], CommandNotFou
   ndException
   + FullyQualifiedErrorId : CommandNotFoundException
Get-Process : Cannot evaluate parameter 'Name' because its argument is specifie
d as a script block and there is no input. A script block cannot be evaluated w
ithout input.
At C:\Script Nathalie\Everyware2.ps1:331 char:8
+ process <<<< {
   + CategoryInfo : MetadataError: (:) [Get-Process], ParameterBindi
   ngException
   + FullyQualifiedErrorId : ScriptBlockArgumentNoInput,Microsoft.PowerShell.
   Commands.GetProcessCommand
The term 'end' is not recognized as the name of a cmdlet, function, script file
, or operable program. Check the spelling of the name, or if a path was include
d, verify that the path is correct and try again.
At C:\Script Nathalie\Everyware2.ps1:345 char:4
+ end <<<< {
   + CategoryInfo : ObjectNotFound: (end:String) [], CommandNotFound
   Exception
   + FullyQualifiedErrorId : CommandNotFoundException
The term 'set-shareABE' is not recognized as the name of a cmdlet, function, sc
ript file, or operable program. Check the spelling of the name, or if a path wa
s included, verify that the path is correct and try again.
At C:\Script Nathalie\Everyware2.ps1:348 char:13
+ set-shareABE <<<< TESTSTO01 $Company$ -Enable
   + CategoryInfo : ObjectNotFound: (set-shareABE:String) [], Comman
   dNotFoundException
   + FullyQualifiedErrorId : CommandNotFoundException

Access Based Enumeration not working Windows 2012 R2 Datacenter

I am having a hard time figuring out why Access Based Enumeration is not working for me. I have set and re-set the settings and I'm still able to see folders I should not. I do get denied access on folders I don't have access to.
I have checked effective access which say everything is denied to me but I can still see the folder(s) listed.
I have the share permissions set to authenticated Users - Full Control
I have the NTFS permissions set to the correct Dept. Groups. - Modify, and Domain Admins - Full Control and Guests - Deny Full Control
Any idea's?
--------Update--------
I believe I had found the issue. It was a rights issue with a group that added to the local admins group.

Hi,
It seems that you have resolve the issue.
Please feel free to let us know if you need further assistance.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Access Based Enumeration on CAD /Design Files 2008 R2

Hi,
I'm currently having some issues with our Windows Server 2008 R2 File Cluster, where the System Process is chugging along @ 80-95% CPU, which I personally find strange. After 2-3 hours of this type of resource utilization, we experience a failover to our
passive node. After a few hours of user connectivity and build it the same thing happens again.
Using ProcessExplorer I have been able to identify the srv2.sys driver having massive amounts of threads being created, with several running at 10-15% + CPU utilization per thread. srv2.sys driver is for SMBv2 Connectivity from my research and troubleshooting
of these issues.
I have had a ticket opened with MS Premier Support and I have completed installing all of the latest srv2.sys file updates to the latest version for 2008 R2, but we still seem to be having the issues, although it is intermittently. One of these fixes was in
relation to enabling Access Based Enumeration to a certain level within your File System/Structure (http://support.microsoft.com/kb/2732618/en-us)
Other hotfix installed is
http://support.microsoft.com/kb/2831154/en-us
We have users who run multiple image and CAD applications (Adobe InDesign, AutoCAD, MicroStation, Revit etc) across our network drives, as well as what I would call "standard" File Server access (word docs, spreadsheets, PDF's, powerpoint presentations
etc).
We have ABE enabled across all volumes.
At the moment, I am praying for the server to again reach 100% CPU capacity due to the System Process using these resources.
What I was wanting to ask is, are there any known issues with using Access Based enumeration of Drives for users/applications that use these InDesign/AutoCAD like applications?
The reason I ask this is that when we experience this issue I notice more activity on our volumes that host these CAD/Design files, compared to when we experience a period of stability on the system.
I have read on a few articles regarding Microstation that if it is a specific version, that you should disable SMBv2 via registry to revert to SMBv1 for better use/stability. I am going down the path of disabling SMB2 for all users who use these CAD applications
to see if this assists in resolving the issue, but I'm trying to explore all other options/potential issues to better configure our File Cluster
Looking for guidance on troubleshooting this issue further.
Thanks in advance.

Hi,
After the hotfix is installed, did you create a new registry entry? If not, please following the steps below to create a new registry entry:
1. Open Registry Editor. To do this, click Start, type regedit in the Start Search box, and then press Enter.
2. Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\LanmanServer\Parameters\
3. On the Edit menu, point to New, and then click DWORD (32 bit) Value.
4. Type ABELevel, and then press Enter.
5. On the Edit menu, click Modify.
6. In the Value data box, type a number according to the level that ABE is enabled on the shared folder, and then click OK.
7. Exit Registry Editor.
Note: The ABELevel value specifies the maximum level of the folders on which the ABE feature is enabled. For example if you enable ABE on \\Server\share, you must set the ABELevel value to 1. If you enable ABE on \\Server\share\share, you must set the ABELevel
value to 2. If the ABELevel value is not set or has value of 0, then this hotfix is not enabled.
The value of the above mentioned key is set as follows:
Value = 0: ABE is enabled for all levels (default behavior without key as well)
Value = 1: ABE enabled for depth of 1 (\server\share)
Value = 2: ABE enabled for depth of 2 (\server\share\folder)
And so on for multiple levels.
Please configure this registry key with the value that’s most suitable for your environment.
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Some folder is empty when enabled access-based enumeration + Deduplication

Hi Everyone,
Background:
Recently we migrated the file server to win2012 r2. We have enabled dedupication and enabled access-based enumeration.
The data stored in D drive vm, so we just connected the D drive to the new 2012 r2 server. Security rights all the same as before.
Problem:
People reported that they can see their files and folders directly under their client folders, however some of the sub-folders are empty. when we checked from our file server, those sub-folder have files
inside.
We did some test, we tried to disabled access-based enumeration, checked from user shared drive and see the files are visible again inside the folder.
Has anyone experienced that before and can give me the solution?
Thanks!!
MT

Hi,
From the symptom it should related to Access Based Enumeration which means it is affected by NTFS permission settings. Please help list the NTFS permission settings on folders and an affect file.
Meanwhile you can try to create another share folder with basic NTFS permissions such as:
Domain Admins: Full Control - This folder, subfolders and files.
Creator Owner: Full Control - subfolders and files only.
A testuser group: Modify (on a specific subfolder and its files).
Everyone - Read - This folder only.
Then add the additional permissions which is added on your real shares to the test share one by one to see which one causes the issue.
If you have any feedback on our support, please send to [email protected]

ABE Access based enumeration not working

Hello there,
we have a brand new Windows 2012 R2 file server with one share \\server\share1, ABE enabled on this share.
Read access for all Domain users on share.
This share has 2 subfolders, folder1 and folder2.
User Jon has set NTFS read write rights on folder1, but no access rights on folder2 (all set on security tab)
Now when User Jon connects to this share he still sees both folders, but access denied on folder2.
Why can he still see folder2 even when ABE is enabled? Also checked effective rights on folder2, no access.
Thanks in advance

Hi,
Please try to recreate the folders to check if it could resovle thie issue. Do you share the subfolder? If so, the subfolder can still been viewed when browsing the server.
For more detailed information, please refer to the thread below:
Does Access Based Enumeration work with NTFS permissions?
https://social.technet.microsoft.com/Forums/windowsserver/en-US/fd9b8e65-f519-4c24-b721-5a1b9d61f13f/does-access-based-enumeration-work-with-ntfs-permissions
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Problems accessing eLearnings on Mac oSX 10.6.8

Hello,
Does anyone encounter probelms accessing eLearnings on Mac OSX 10.6.8 platform? Tried all 3 browsers - Firefox / Safari / Chrome - (latest versions available) but encounter same problem, getting stuck at "Check System Capability" screen (attach screenshot)
I know SAP says that eLearnings are not compatible with Mac but I can't imagine there is no work around (may be it require tweaking few settings?)
Thanks you very much in advance for any leads to the solution
br, /V

ok it solved now...
Finally i had to install WIndows / IE8 on Mac.. I found following link helpful
- http://osxdaily.com/2011/09/04/internet-explorer-for-mac-ie7-ie8-ie-9-free/

Using single SMB share with multiple Hyper-V clusters

Hello,
I'm trying to find out if I can use a single SMB share with multiple Hyper-V Clusters. Looking at:
How to Assign SMB 3.0 File Shares to Hyper-V Hosts and Clusters in VMM
I think it's possible. Since the File Server is going to handle the file locking it shouldn't be a problem.
Has anyone tried that?
Thank you in advance!

Hello,
I'm not sure that's possible, I get this from this statement:"Assign the share—Assign
the share to a virtual machine host or cluster."
Even if it worked I wouldn't do that. Why don't you just create multiple shares?

Windows Server 2012: SMB share with transparent failover

Have a nice day to all!
I have 2 HP Proliant DL380P Gen8 servers containing 8 x 1TB disks (with P420i HP Smart Array RAID Controller) in each server.
So, there are 2 arrays on every server:
1. 2 x 1TB in RAID1 (+1 disk for hot swap) - system volume
2. 5 x 1TB in RAID5 (+1 disk for hot swap) - data volume
And I installed Windows Server 2012 Standard on each server.
Than I created a failover two-nodes cluster.
And now I want to create a SMB share with transparent failover for all the second (data) volume (it's about 3.3TB in RAID5 array). How just can I reach this goal? I'm going to use it in future for Hyper-V VMs, so, the main reqirement is powered-on and working
VMs even if one node of SMB share cluster is failed.
I wasn't able to see my volumes in failover cluster manager. I tried to create iSCSI targets, storage pools, virtual disks, etc. but no luck. My failover cluster manager can't see it to create SMB share!
Can anyone advice me something?
Thanks in advance!

Have a nice day to all!
I have 2 HP Proliant DL380P Gen8 servers containing 8 x 1TB disks (with P420i HP Smart Array RAID Controller) in each server.
So, there are 2 arrays on every server:
1. 2 x 1TB in RAID1 (+1 disk for hot swap) - system volume
2. 5 x 1TB in RAID5 (+1 disk for hot swap) - data volume
And I installed Windows Server 2012 Standard on each server.
Than I created a failover two-nodes cluster.
And now I want to create a SMB share with transparent failover for all the second (data) volume (it's about 3.3TB in RAID5 array). How just can I reach this goal? I'm going to use it in future for Hyper-V VMs, so, the main reqirement is powered-on and working
VMs even if one node of SMB share cluster is failed.
I wasn't able to see my volumes in failover cluster manager. I tried to create iSCSI targets, storage pools, virtual disks, etc. but no luck. My failover cluster manager can't see it to create SMB share!
Can anyone advice me something?
Thanks in advance!
You need to have your storage you want to export as being a shared storage visible to your cluster (part of CSV). Then you'll configure failover file shares using content accessible from both cluster nodes. Refer to this manual for diagrams (ignore StarWind
and replace it logically with your existing shared storage you've used to create your cluster):
http://www.starwindsoftware.com/configuring-ha-file-server-on-windows-server-2012-for-smb-nas
Also see these manuals from MS on how to create failover file server:
http://technet.microsoft.com/en-us/library/cc753969.aspx
http://technet.microsoft.com/en-us/library/cc731844(v=ws.10).aspx
http://blogs.technet.com/b/askcore/archive/2010/08/19/working-with-file-shares-in-windows-server-2008-r2-failover-clusters.aspx
However if you want to use existing storage located on the both nodes you're out of luck. Microsoft does not provide anything representing local DAS to the cluster nodes. If you want to use existing DAS then you'll have to stick with a third-party product
like StarWind, SteelEye or DataCore. To create something like in this picture:
So you'll have a configuration with only two nodes, no physical shared hardware (SAS JBOD, FC or iSCSI) and vSAN. Refer to this manual:
http://www.starwindsoftware.com/ns-configuring-ha-file-server-for-smb-nas
Hope this helped :)
StarWind iSCSI SAN & NAS

Cannot use this version of the application with this version of MAC OSX

When I try to download the new beta, I get a message that says: cannot use this version of the application with this version of MAC OSX
I'm new to Macs, but I installed all the software updates and that still didn't help. I dont have to buy a new operating system do I?

Muse requires Mac OS X 10.6 or later.
http://muse.adobe.com/tech-specs.html

I purchased a new airport time capsul to use with my older MacBook Mac OSX 10.6.8 and am having trouble downloading the updated software for it .

I purchased a new airport time capsul to use with my older MacBook MAC OSX 10.6.8 Can't seem to download the upgraded software. Can anyone help?

Please review the System Requirements for the Time Capsule.
http://www.apple.com/airport-time-capsule/specs/
Setup and Administration
iPhone, iPad, or iPod touch with iOS 5 or later and AirPort Utility 1.3
Mac with OS X Lion v10.7.5 or later and AirPort Utility 6.3

Double click to open .sql files with sql developer on mac osx

hi,
I am trying to double click a .sql file and open it with SQL Developer on Mac OSX lion. I have associated .sql files to SQL Developer. On clicking the file it opens the SQL developer application but does not open the actual .sql file. Any ideas?
Thanks

Hello,
Did you find any solution to your problem ? My SQL Developer worked fine and could open additional SQL files. Now it only opens the first one when starting SQL Developer. Additionnal files cannot be opened. Even running sqldeveloper.exe from command line with a SQL file as parameter doesn't help.
I'm on Windows 7, 64 bit, but the environment may not necessarily be the cause.
Regards
-- Alwin

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

I have a US Mac living in the UK. I tried to download both the British and American version. Both state "You cannot use the application Firefox with this version of MAC OSX". Any suggestions how to proceed?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. You can get the latest version of Firefox 3.6 which works on OS X 10.4 from http://www.mozilla.com/en-US/firefox/all-older.html

SMB Share with Access Based Enumeration & Mac OSX 10.8/10.9

Similar Messages

Maybe you are looking for